Machining process #5

[@Hellionchild999]

I see chatter on that finish!!

[@danl.4743]

Where?

[@Hellionchild999]

@@danl.4743 The shaft.

[@TungaloyCorporation]

Thank you very much for seeing it!

[@Silver_Nomad]

Well... Easy way to get rid of it: first of all, you are making a copy of door key on a laser cutter, so you can operate this thing with open door. At second you take some sandpaper and polish this thing until it shines like balls of the cat.

[@JSMPrimeOperations]

Thats what we Turning Guys call SFM Zonk, those SFM Zonks tend to like a little more cutting force with a deeper depth of cut, and a little bit more feed, but that tool angle doesn't offer any favors either, considering what's there it's a pretty decent little guy :P them small parts and them raging RPMs I tell ya,

[@Kryptonian76]

It's nice that the cutting bits also look like art.

[@TungaloyCorporation]

Thank you for liking it!

[@alexnielsen6880]

Tungsten tool bits are incredible.. the are light as a feather but atleast 10× stronger then regular steel bits

[@automan1223]

you guys have the nicest short cnc videos on YT !

[@TungaloyCorporation]

Thank you so much for your compliments! It means a lot to us to hear you say that!

[@TungaloyCorporation]

Click here for the long version! kzbin.info/www/bejne/nXPUdZuhd5KLbpYsi=vm739VGKzvDRFVgS ■Products & cutting conditions ①Holder : ADJNL2525M15-A, Insert : DNMG150408-TSF T9115 Vc = 200 m/min, f = 0.15 ~ 0.2 mm/rev, ap = 0.25 ~ 1.25 mm ②Holder : AVVNN2525M16-A, Insert : YNMG160404-ZF T9225 Vc = 150 ~ 250 m/min, f = 0.1~ 0.15 mm/rev, ap = 0.25 ~ 0.5 mm ■Work material : C45

[@ravindra9718]

Drawing dend kijiye

[@kusa_tyan]

おぉ…見事…綺麗なポーン…

[@TungaloyCorporation]

コメントありがとうございます！ あとは、ナイト、ビショップ、クイーン、キング！ナイトが難しそうですね★

[@inthefade]

I never knew that I wanted an entire set of machined steel chess pieces. Maybe one set would be gun blued. It would be so satisfyingly to play on a dense hard wood board.

[@TungaloyCorporation]

Thank you for watching the video!

[@DarthGTB]

Put one of the sets to rust and coat the other to not rust

[@ChetanSharma-e1k]

I never knew I wanted an antique set of machined steel chess pieces. If you want to buy it then come to our link

[@MarshallMcFarlin]

OAK AND BLACK WALNUT WITH BRONZE CORNER PIECES ON A Wrought iron base as it would be heavy.

[@jadg1242]

クーラントなしで削れるんですね。美しい仕上がりです😊

[@TungaloyCorporation]

コメントありがとうございます！ 適正な条件ですと、ドライでもこのように加工できます！もちろん、推奨はクーラント使用しての加工になります！ 使用する事で、加工面、切屑処理、工具寿命に影響があります！

[@jadg1242]

@@TungaloyCorporation なるほど...φ(. . ) ドライの方が、動画としては見映えがありますね🙂

[@KazukiNishino]

Definitely needs coolant on the one I run, ran it without coolant for 5 seconds and saw sparks flying 😂

[@burgadahz17]

This machine is even more precise than aimbot.

[@TungaloyCorporation]

Thank you for liking it!

[@stacycullum3597]

Worlds most expensive chess piece.....

[@TungaloyCorporation]

Thank you for watching the video!

[@Guestpass13]

Beautiful presentation 😮😊

[@TungaloyCorporation]

Thank you so much for your compliments! It means a lot to us to hear you say that!

[@東天紅鶏-h2z]

ケースから取り出すときにピンセットを使い刃先を避けて持つの好き(好き!

[@TungaloyCorporation]

コメントありがとうございます！ 刃先命でございます！

[@MarshallMcFarlin]

Thanks for the tip. Safety first especially with new blades.

[@HDitzzDH]

Looking at the surface finish there seems to have been some vibrations.

[@arnaldoalbelda1769]

Amazing tools...

[@TungaloyCorporation]

Thank you for the great compliment!

[@roberdanger]

Love watching the finishing pass. Slow it down a little for smoother finish

[@TungaloyCorporation]

Thank you for liking it!

[@russguppy8761]

Gloves maybe, but Tweezer to pick up inserts. I don’t think so. Good video.

[@TungaloyCorporation]

Thank you for your comment!

[@DenisKorablev13]

Мелкие вставки удобно доставать с помощью пинцета

[@Stan-lq1ep]

These are one of the most awesome things I'm actually inspired to try and find how to get a job doing this, really awesome.

[@TungaloyCorporation]

Thank you for the best compliment!

[@OG_SENSEI]

OMG it's so smooth 😭😭✨

[@TungaloyCorporation]

Thank you for liking it!

[@Winter1881]

Очень класно и профессионально,люди будут покупать такие фигугы и шахматы,покажите как вы сделаете коня😊

[@TungaloyCorporation]

Спасибо за ваш комментарий

[@ОлегПаршуто]

Коня сделают на фрезерном.😊😊

[@alex_ex96d25]

😂😂😂😂😂

[@sergeyremains9512]

станок с чпу.проше простого.сделай это на 1к62@@TungaloyCorporation

[@Виталий-я9ы9э]

​@@sergeyremains9512а чё там делать, если ты токарь? Кроме коня можно на кашке все фигуры сделать.

[@CNCExpert]

Love watching the finishing pass.

[@TungaloyCorporation]

Thank you for the best compliment!

[@TheSzakker22]

Perfect! This is steel?👍

[@TungaloyCorporation]

Thank you for your comment! Yes, work material is steel!

[@ayyanathanmechanical]

Beautiful work

[@TungaloyCorporation]

Thank you for the best compliment!

[@alfredoluisbaute1579]

Una maravilla de torno ....

[@TungaloyCorporation]

¡Gracias por su interés!

[@s2Nelsons2]

Legal foi ele responder em espanhol kkkkkk

[@joshyoung1440]

Looks like a chess pawn! Make a whole set!

[@TungaloyCorporation]

This is a pawn processed! We are planning to have all of them, so please look forward to it! kzbin.infoQfDE0Mq2Smw

[@consciouslasagne354]

Beautiful

[@TungaloyCorporation]

Thank you for your good comment!

[@ABIELYASHARAHLA]

It amazes me how ceramic cutters can do what they do. Unbelievable!

[@TungaloyCorporation]

Thank you for your interest!

[@phillhuddleston9445]

These are carbide not ceramic.

[@fernandoveranojimenez]

Es maravillosa la maquina

[@wilneal8015]

😮And It's Pricey As Well😢👍🤗👀✨

[@TungaloyCorporation]

¡Gracias por su interés!

[@travisowens8602]

I used to work in a machine shop when I was 21 or 22. I was on and end mill was think, I used to love to watch the lathe machines work, it was really satisfying to watch.

[@TungaloyCorporation]

It's fun to watch these processing videos! There are many more, so please take a look.

[@indubitably424]

Looks good. Do it on a manual now.

[@TungaloyCorporation]

Thank you for your comment!

[@indubitably424]

Lol. Just giving you a hard time. Apprentice manual machinist here, left handed and learning lathe now myself so I like seeing this content.

[@globalrezzanate9399]

​@@indubitably424 Fair play lad. There is a reason for manual and CNC. Manual is a great way to learn the mathematics and then apply it to CNC and your life will be easier and you will make more interesting parts ..

[@joshuabravener3856]

This is neat i wasn't sure how to get that steel done in that fashion

[@nc4805]

チェスの駒シリーズですね！

[@TungaloyCorporation]

はい！シリーズにして最後は社員同士の対決を配信したいと思っています。笑

[@pjotrmahouwits]

Soldier 💂

[@hasanyalcn4821]

Şah

[@jiuxie4941]

perfect you can see our factory

[@TungaloyCorporation]

Thank you for liking it!

[@hernandezjose9912]

Very Nice ❤

[@TungaloyCorporation]

Thank you for your compliments!

[@danashay]

Smoooth. Well played.

[@TungaloyCorporation]

Thank you for your compliments!

[@ХамзатМагомадов-э3с]

Превосходная работа!! Просто класс!! Респектище!!

[@TungaloyCorporation]

Благодарим вас за проявленный интерес

[@reimi8841]

Amazing 🎉

[@TungaloyCorporation]

Thank you for liking it!

[@justdoiteasyfixservice9488]

I want that chess set I’m a old tool and die maker and I would really appreciate something like that.

[@TungaloyCorporation]

Thank you for your comment! The next one is planned for December, so please look forward to it!

[@stocchinet]

Remember, engravings give you no tactical advantage whatsoever

[@TungaloyCorporation]

Thank you for your valuable opinion.

[@ryonaicorp]

That has to be the nicest ass plug I’ve ever seen😮

[@eru_1994]

Pengen banget punya channel youtube yang ramai seperti abang ini.😢

[@nikosozturk801]

Vnmg R0.4 and Dcmt R0.8

[@TungaloyCorporation]

Thank you for your comment!

[@dannydetonator]

:-D And TiO2 coating..

[@azwan7877]

Dnmg 0.8 and vnmg 0.4,

[@LinhNguyen-cn6pf]

YNMG 331

[@LinhNguyen-cn6pf]

And DNMG 431

[@Epic_Shitzz]

Amazing work.... What are those cutting bits are made of...?

[@TungaloyCorporation]

Thank you for your comment! The material of the insert is made of cemented carbide, which is the second hardest material after diamond!

[@Epic_Shitzz]

@@TungaloyCorporation thanks a lot for this information 👍👍

[@ogliberty5486]

Were the tweezers necessary?

[@TungaloyCorporation]

Thank you for your comment! Yes, we took safety into consideration!

[@ogliberty5486]

@@TungaloyCorporation you used your hands when placing it into the holder. So make the tweezers make sense when taking it out of the box? Are you just so corporate that you can’t admit that’s redundant?

[@TungaloyCorporation]

@@ogliberty5486 It was difficult to insert with tweezers and was set by hand. Thanks to the gloves, I was able to set it without problems!

[@ogliberty5486]

@@TungaloyCorporationso why use the tweezers? Can you just say it was for the video? Because they serve no function.

[@TungaloyCorporation]

@@ogliberty5486 When attaching the insert to the holder, it was difficult to do with tweezers, so I attached it with gloves on. Although it is possible to remove the insert by hand, we used tweezers to avoid making it difficult for the viewer to see the insert.

[@JosephMostowy]

Actually, that part has a mirror finish. There was another different big part on the bench that was only roughed. You just see the reflection. Lol

[@TungaloyCorporation]

Thank you for watching the video!

[@irwandisusanto2406]

Amazing

[@TungaloyCorporation]

Thank you for the great compliment!

[@ВасилийЕртыбашев-г2щ]

Красивая пешка, залипательно! 😊

[@TungaloyCorporation]

Благодарим вас за проявленный интерес

[@Snooppacoff]

Еб.нные шахматы)

[@ГригорийГудков-ч6щ]

А коня так может вытачить?

[@TungaloyCorporation]

Спасибо за ваш комментарий

[@АлексейЛозовский-м4х]

Только лошадь)

[@paff4eg]

Могу кобылу в соседнем цеху запилить на восьмиоснике 🙂

[@junes2k]

I watch one cnc video now it's all trailer hitches & chess pieces.

[@TungaloyCorporation]

Thank you for your comment.

[@andreyv3432]

Мы делаем металлические стружки, много стружки!!

[@TungaloyCorporation]

Спасибо за ваш комментарий

[@berryJi-u7q]

Good job🎉

[@TungaloyCorporation]

Thank you for liking it!

[@vipinelias7573]

Nice work

[@TungaloyCorporation]

Thank you for liking it!

[@Max_Marz]

Chess pieces are the benchy of the cnc lathe demo world.

[@TungaloyCorporation]

Thank you for your comment!

[@thomasgorecki1321]

Nice, but that’s a tough way to make a chess piece!

[@TungaloyCorporation]

As you said, it was difficult! We will be doing the second part in December, so please look forward to it!

[@timothy098-b4f]

The pressure on the tip of that insert must be ridiculous. Carbide is amazing stuff.

[@TungaloyCorporation]

We agree! Sharpening iron is amazing!

[@ПродажаСоломорезки]

Просто прекрасное зрелище для души

[@TungaloyCorporation]

Благодарим вас за проявленный интерес

[@PinpointR]

Should call that one Aztec spear

[@TungaloyCorporation]

Thank you for your comment!

[@facorread]

The first 3 seconds looked as if you were going to play DnD

[@TungaloyCorporation]

Thank you for watching the video!

[@LinhNguyen-cn6pf]

We used Tungaloy insert 20 years ago. Now we using CNMG 432, DNMG 432, VNMG 331 HRM AH 8015 for Inconel 718 150 Ksi cut very good

[@TungaloyCorporation]

@@LinhNguyen-cn6pf We are glad to hear that! We look forward to working with you!

[@bigdog8177]

Try a 3 radius insert 😊

[@TungaloyCorporation]

Thank you for your comment!

[@louhartin4483]

That’s just a pawn in this machining game

[@TungaloyCorporation]

Thank you for your comment!

[@志賀貴宏-t8p]

作業工程のダイヤラップやってました。 刻印までの工程で商品の検査や寸法のサイズの品質も良い状態だと思います。

[@TungaloyCorporation]

コメントありがとうございます！

[@saygefujiwara-id6pr]

Awesome incisors, 👍👍👍👍

[@TungaloyCorporation]

Thank you for the best compliment!

[@wilson_goncalves]

❤❤❤❤lindo trabalho, parabéns

[@TungaloyCorporation]

Obrigado pelo melhor elogio!

[@RealNotallGaming]

next time use F0.02mm for finishing, a G50 (rpm limit) and a more tough finishing pass ^^

[@TungaloyCorporation]

Thank you for your valuable advice! The next one is planned for December, so please check it out as well.

[@Генадий-ч4и]

Работал в УПК ученики с удовольствием точили фигурные изделия, шахматы, ♟, подсветчники (тв4 СССР 87г)

[@TungaloyCorporation]

Благодарим вас за проявленный интерес

[@lggarozenttal6752]

Какая хорошая шероховатость... 👍👍👍

[@TungaloyCorporation]

Спасибо за ваш комментарий

[@МиланДобрић]

Well done.

[@TungaloyCorporation]

Thank you for your compliments!

[@oldnick4707]

Hah! Didn't see that one till the very end! 😂

[@TungaloyCorporation]

Thank you for watching the video!

[@clintonmiller4917]

I have no knowledge of CNC Machines or they work. And don't want to know either. But I could watch them work all day. Lol.

[@TungaloyCorporation]

Thank you for watching the video!

[@ThePatriotParadox]

This is what i want to do.... Machining with all old-school type machinery, really want to step up and learn CNC programming etc. i feel it's the next level to progress in machining. That and a metal additive 3D printing!

[@TungaloyCorporation]

You are a future engineer! That's amazing!

[@ThePatriotParadox]

@@TungaloyCorporation thank you, I've always been a mechanic and worked with machining equipment, like lathes, presses, numerous metal fabrication tools and also welding.... And have always loved engineering on a small scale, producing parts or tool's needed for things I didn't have or part's I couldn't afford. Always have been computer literate, CNC programming and additive manufacturing with semi precious metals seems so appealing and because there are things I want that I only want to build.... NOT BUY

[@ThePatriotParadox]

@@TungaloyCorporation Do you have any information or videos on additive manufacturing/ 3D printing?

[@TungaloyCorporation]

@@ThePatriotParadox We have a little bit of it, so please watch this video. kzbin.info/www/bejne/n2TGlmCfr6dqpZY

[@Raghunath0405]

Super fantastic ❤❤❤❤❤

[@TungaloyCorporation]

Thanks 🤗

[@buivansang826]

Hàng chất lượng cao 🥰🥰🥰👍👍👍

[@RealNotallGaming]

i still remember the best cutter i ever used was like QSER\L and 3.something mm (old series) was beautiful F0.04mm thank you tungaloy ^^ sadly turning inserts are a little under the competition ^^

[@TungaloyCorporation]

Thank you for using us for a long time! We will do my best to contribute even more to turning chips!

[@erosnolove]

Can you tell me what camera you used to record this video?👉👈

[@TungaloyCorporation]

Canon SLR camera!

[@los4vws]

I find it funny when their like look what I made. N I’m like no the machine did. You just pushed a few buttons.

[@TungaloyCorporation]

You are made of machines, tools, and people!

[@dmitriyzolotuhin591]

Эти резцы, как артифакты с другой планеты.

[@TungaloyCorporation]

Спасибо за ваш комментарий

[@dharamendarakumar9776]

Good luck hai bhahi😊

[@TungaloyCorporation]

Thank you for your comment!

[@benarddemers3392]

That would never pass surface finish inspection

[@TungaloyCorporation]

This time we did it dry so that you can see the processing and the product carefully! We think that problem will be solved if you process it with coolant!

[@manhoodshakir8062]

Great and strong tools ❤❤

[@TungaloyCorporation]

Thank you for the great compliment!

[@ostendfaxpost1]

Let the tools and engines do the work. We make party.

[@TungaloyCorporation]

Thank you for your interest!

[@tentoten-kp6zn]

めちゃかっこいい！

[@TungaloyCorporation]

凄く嬉しいです😭 ありがとうございます😊⭐️

[@englishjake]

Needs a sanding but amazing code

[@TungaloyCorporation]

Thank you for liking it!

[@theabstudios3174]

Damn we came from knowing only how to light a fire to this 😳

[@TungaloyCorporation]

Thank you for your comment!

[@julioserrano4624]

Muy satisfactorio!

[@TungaloyCorporation]

Muchas gracias por sus cumplidos. Significa mucho para nosotros oírle decir eso.

[@РоманЕпанчинцев]

это шедевр !!!!!

[@vinoddusang7784]

Its very easy for me but my company will never give me chance to make this timepass piece

[@TungaloyCorporation]

Thank you for your interest! Are you a machinist?

[@feniksflash166]

Эти резцы как произведение искусства...

[@TungaloyCorporation]

Благодарим вас за проявленный интерес

[@sion023]

Need another 15 of those, 8 in brass

[@TungaloyCorporation]

Thank you for your comment!

[@miplanshet7426]

Хорошая пешка получилась, а коня сможешь так сделать?

[@TungaloyCorporation]

Мы готовимся к следующему выпуску в декабре, так что ждите его с нетерпением.

[@yodaddy82daddy70]

Want to impress me, make a knight 😂

[@TungaloyCorporation]

Knight is difficult, so I guess it's the last one!

[@Cody.357]

Ooo a pawn!

[@TungaloyCorporation]

Thank you for your comment! The next one is planned for December, so please look forward to it!

[@islampolo4532]

На финише это будет самый технологичный и дорогой набор шахмат, если там работать, то нет проблем.

[@TungaloyCorporation]

Благодарим вас за проявленный интерес

[@luisfernandomena3389]

me gusta mucho este tipo de videos

[@Petrolhead99999]

Our VNMG inserts say "PP" on them

[@TungaloyCorporation]

Thank you for your comment!

[@evgen6142]

Классные резци👍👍👍

[@TungaloyCorporation]

Благодарим вас за проявленный интерес

[@fabianrios3021]

Que belleza de maquina

[@TungaloyCorporation]

Gracias por su comentario.

[@MikeFetzer-b7j]

Nice pawn! I'm old school, before CNC, why no lube&coolant. Would'nt make the tool last longer?

[@TungaloyCorporation]

Thank you for your interest! This time we did it dry so that you can see the processing and the product carefully! We recommend using cutting oil!

[@chrisbrandon511]

I thought it to be the bishop

[@FujiHarumi]

Kelassss 🔥🔥🔥

[@TungaloyCorporation]

Thank you for your comment!

[@鍋谷正司]

角が丸い方が粗挽きですね、角が鋭い方が仕上げなんですね😃結構昔に旋盤加工していましたが、懐かしいです‼️

[@TungaloyCorporation]

コメントありがとうございます！ 昔加工されていたんですね、こういった動画見ると加工したくなりますか？

[@michaelshea4103]

It's a ton of fun playing with a laid

[@rushgamer1726]

Can you please tell me Which cycle used for this product ?

[@TungaloyCorporation]

Sorry, We don't have a program. I've been told by everyone that they want a program, but do I really need one?

[@cocospops9351]

You want Moszkowski maybe? No. Plays Moszkowski.

[@TungaloyCorporation]

Thank you for your comment!