Machining Solid Spherical Bearings For My GT350

[@SpeedNessRx7]

Nice upgrade on the lathe! Definitely enjoy the machining videos, keep them coming.

[@RLCPLUMBINGLLC]

I enjoy any video that's educating me to higher thanking. When I buy the shop next to me I will be setting up a machine shop to be able make my own ideas. Loved the video

[@Ayeare]

Love these videos as they show what can be possible with easily accessible tools

[@georgedreisch2662]

A thought. Would suggest pressing the bearings and the assembly’s in “wet” with either zinc chromate or polyamide primer to prevent corrosion from water entrapment and dissimilar metals.

[@shearrer7011]

GT500 CFTP springs are 268 F 942 R so your choice in springs with big aero should be close enough to get the job done. Nice components, excellent idea, and would be a great product for the 6th gen Camaro as well.

[@denisbassom172]

As a trainee "hobby" machinist, always interested in seeing these sorts of videos. My little lathe is older than you are!

[@davidkeenan5989]

Thumbs up for machining type videos.

[@jamesr7335]

I recommend putting 3 to 4 .200" "U" shaped slots on the 1.200" bore side to give access to press the spherical bearing out when they eventually wear. Then you can make a "socket" with the 3/4 .1875" dowel pins as a press tool. Especially if you are going to sell these.

[@ajhartmanaero]

Not sure I follow. The spherical can be pressed out as is.

[@craigfiles7067]

love watching the development of the GT350 would those spherical bushes fit 2017-2019 GT models?

[@ajhartmanaero]

I think so but not 100% sure at the moment.

[@1993ka24det]

In 1 of your videos you mention if a part was added a the out come was better than 10/1 cd. So adding a diffuser would play a big role so scratch that, but what is the spectrum for flat floors of what you've seen? Asking for a friend 😁

[@jeanfrancoispoivre4438]

Très intéressant 😊

[@ПавелСлезко-ю3т]

Hi. Please make a video about how you make matrices (forms) for vacuum infusion🙏🙏🙏

[@Maaaaaax-07]

As a mechanical engineer student this is so intersting ! How did you decided the tolerances ?

[@ajhartmanaero]

Guessed.

[@doma5262]

what are your thoughts on dust seals for these kits?

[@Alexander-bk1se]

Hello, was interesting to watch your video, I'm also a car enthusiast who uses sometimes the lathe. Question out what material did you made the spacers? Most of the time you see steel but I'm wanting to make them from aluminium.

[@ajhartmanaero]

Made mine from aluminum. Ok so far.

[@BjornFSE]

nice

[@_.kvng.ky_1081]

Can I get some of these made for a mopar 😂😂😂