HOW TO SET UP A CEMENT MIXER WHEN ON YOUR OWN

[@rapidtightgroup]

Stood on my own looking at the mixer scratching my head.......then watched this....top man,thank you for your time and effort..just saved my back and a possible hernia.....

[@macplastering]

Haha Thanks for the comment buddy much appreciated only too happy to help you my friend subscribe for more tips ;)

[@dantrixter]

Well done, this video helped me 👍🏼

[@macplastering]

Hi Dan so glad it helped you mate :)

[@vimcfy5216]

been struggling for ages with this mixer till now !!! many thanks ............

[@macplastering]

No problems stick around for more tips and ticks :)

[@MartinHangie]

I hired a mixer with no instructions. I was doing it all wrong. Thanks for showing me how the legs fit together!!

[@macplastering]

Any time buddy :) thanks for watching and commenting

[@mackem7200]

thanks very much. have to set a mixer up on my own tmrw . Great video

[@macplastering]

nice one so glad this has helped you some :)

[@annamacconnell4392]

Thank you for the video. I worked it out but wasn’t sure I’d got it right and was a bit worried in case it would collapse or something. This is reassuring. Now I just have to go and do it...

[@macplastering]

Hi Anna glad the video helped some what is the project your doing ?

[@annamacconnell4392]

@@macplastering k

[@annamacconnell4392]

I was just putting some posts in for a fence round my garden, make a bit of a windbreak

[@macplastering]

@@annamacconnell4392 Hope it went well for you Anna :) we also have a few cement mixing videos and a concrete one :)

[@norfolkbushmanandfriends7916]

Cheers mate, I was scratching my head about this & now I can do it on my own 👍👍👍

[@macplastering]

Nice1 glad it helped mate =)

[@ClaireSweets]

Thankyou. Glad I saw your video. Really helpful.

[@macplastering]

Thanks for watching Claire :) Glad it helped

[@grahambrown5874]

Great video. Just hired a mixer and couldn’t work out how to assemble the stand and safely put mixer on top. Now I know 🙏👍

[@macplastering]

Glad to have helped you mate, hope you subscribe for more :) good luck on the project :)

[@privacy3116]

Thanks. Very good and to the point.

[@macplastering]

Thanks 😊 so glad to have helped Thanks for watching and commenting mate

[@ausfree]

Do you think this could damage the gearbox over time? I do the same to my tip up mixer which is a bit bigger and has a different stand.

[@macplastering]

Its gentle enough and smooth be not much more wear and tear than a full load in it spining and getting dropped out if you know what i mean mate

[@ausfree]

@@macplastering yeah excellent point. G'day from Australia mate

[@macplastering]

@@ausfree nice1 mate be new videos out every Sunday 2

[@larisa_ivanovna]

Concrete Mixer is a class. Great video. Thanks to that shown.

[@macplastering]

+Лариса Ивановна Thank you my friend :)

[@eire5507]

Great video Mac👍 helps big time when on your own

[@macplastering]

+Ryan Sloan Cheers man sure beats double lifting :) thanks for watching mate

[@ZoiPana]

Very nice video! ♥

[@macplastering]

+Danai Moraiti (danai2014) Thank you my good friend have a great Friday :)

[@ZoiPana]

macplastering ♥

[@JennysCountryChannel]

Another good one, Mac :-) Thumbs up! Best wishes, Jenny

[@macplastering]

+JennysCountryChannel Thanks Jenny :):)

[@kevincasson9848]

Nice on Mac. Extremely helpfull ❤

[@macplastering]

Glad to have helped you mate :)

[@mixtathetrixta]

Worked for me... cheers!

[@macplastering]

Nice one mate :):)

[@ForensicCats]

Great job Mac.

[@macplastering]

Thank you mate :) I see the US mixers are diffrent than our type here we have these for our sand and cement / stucco and lager sized but with a drum

[@ForensicCats]

And stands - haha - we don't have them...rather, no one sells them... I will have to design and make my own... I have always like them... It is a 6 cubic foot one - maybe that is why - - hah

[@macplastering]

how would you get that onto a stand?

[@macplastering]

our large mixers have an engine and wheels and a hook so they can be puled onto a truck or trailer for transport, they run on diesel fuel these small ones can also be run from petrol

[@ForensicCats]

Yes, I have used that style...

[@makolic1]

very well done , how do you get it back down by yourself ?

[@macplastering]

Hi Makolic1 I should have put that in the video as well but it is basically the same in reverse but can be trickier it is of course better if you have help to lift off so if on your own be careful not to hurt yourself or damage your mixer and thanks for watching :)

[@DawnRamblesDivination]

Great information

[@macplastering]

+Daily Rambles Thank you my friend :):) Have a great Day/Night :)

[@fielder8412]

Very helpful. Thanks.

[@macplastering]

Thanks for watching so glad it helped =)

[@bladder1010]

Thanks! You saved my back.

[@macplastering]

Haha cheers for watching mate :):)

[@gerzomcc]

Very good idea!

[@macplastering]

+Gerzo McC (Dragonball Gamer) Thank you Gerzso mate :):):):

[@kf5541]

I tip it up the opposite way using the handles, saves putting the rim on the deck

[@macplastering]

Top of the morn to ya that is even better keeping the rim clean :):)

[@Papy57]

Great video as always! Big like! Greetings !

[@macplastering]

+papy nounn Thank you papy my friend have a great weekend :):)

[@Skullmonkey456]

Spot on that pal thank you

[@macplastering]

Hi mate thanks for the support we have new videos every Sunday. again thanks for taking time to comment All the best MAC :)

[@Skullmonkey456]

Subbed👍🏻 I'm a sparky but doing my own extensions all tips help

[@macplastering]

@@Skullmonkey456 Nice one mate will save yourself a mint on the wiring :) being a spark is a great trade man if need any tips or ideas always here and have a tonne of videos might find other helpful things :)

[@SaraSyn]

That looks like a lot of work !! Good video my friend ^^

[@macplastering]

+SaraSyn No this is the easy part putting the mix in the mixer is the hard part and then the wall :) Thanks for watching my good friend Sara :):)

[@SaraSyn]

+macplastering no problem ^_^ Always support whenever I can my friend

[@macplastering]

+SaraSyn Likewise :):) Have a great night ;)

[@SaraSyn]

macplastering Thank you ^^ u 2

[@pennyhaberfield3891]

thank you will try

[@macplastering]

Hope it works we for you my friend , thanks for watching new videos every Sunday :)

[@TereziaGavalierova]

💕 AWESOME VIDEO!SUPER ! Thumbs up ! )) 😍 👍 Thanks for sharing. Happy weekend , full of love and joy! best regards ♥ hugs

[@LetsPlayRU]

Very nice

[@macplastering]

+Lets Play Thanks mate :):)

[@battonfive]

nice and efficient, and safe :-) I like it, I was wondering why you used the stand, but when you tipped it forward like to feel a wheel barrow or bucket say, then the ease made it all make complete sense :-D

[@macplastering]

+BattonFive Yes mate as safe as a mixer gets ;) well If I had have put t up using the handles be safer but the the cam wouldn't have seen lol

[@battonfive]

macplastering it does look sturdy :-) and a good out the way location for it as well somewhere like that :-D

[@GiannhsDaskalakhsLASER]

great video !

[@macplastering]

Thank you my friend :)

[@StevePhillips]

Clever tip I would have struggled with that by lifing it on

[@macplastering]

+Steve Phillips hi steve mate yes it works out handy for sure :) Thanks for watching :)

[@MrMoaningMan]

try reading the instructions on the mixer noob

[@macplastering]

Some Bloke Erm some guys use builders mixers that do not have them on them anymore but great input some bloke noob have a nice day

[@MrMoaningMan]

+macplastering were is your professional mixer then?

[@macplastering]

Some Bloke this video is for people with less knowledge than yourself your in the wrong place buddy

[@NottsPlumber]

Thanks

[@macplastering]

Any time mate always here and new videos every SUNDAY :)

[@markhep]

I had to give up on my stand a few month back bloody tipping bit seased up on mixer so want tip now so the scrap men have the stand lol it hard doing concrete without one 👍

[@macplastering]

Hi Mark mate yes sometimes you wont need the stand but when you do relay do , We need to learn some wielding to fix these things :)

[@markhep]

@@macplastering 😂😂😂Yere I watch blacksmith videos all the time on you tube minght get a welder and a forge 😂😂👍👍👍

[@macplastering]

@@markhep Same mate seen a guy buy a cheap weilder for 100£ or so and made window rails he was good but I just want it for repairs ps this guy was a joiner with no knowledge at all and his work looked sweet

[@markhep]

@@macplastering nice one 👍👍👍

[@1rambofirstblood]

Why do it that way,I do it from the front,just tilt the mixer back,then put the stands in,and you can grab the handles and push it forward.👍👍👍👍

[@macplastering]

just the same really but yea your ways is better

[@davidmoore3524]

I lift it the other way, looks like you could fall on the bloody think that way but they both work I guess

[@macplastering]

Hi David budd you just missed the live stream man , yea both work and even if i was doing the other way id make it look hard still haha :) Thanks for watching buddy

[@lloydjbear5383]

👍

[@macplastering]

@lloydjbear5383 thanks for the support mate 👍

[@lloydjbear5383]

@@macplastering you saved my spine 🫡

[@macplastering]

@@lloydjbear5383 yea i used to struggle untill i seen i guy do it this way the new mixers have instructions but never see that on an old one and most guys use old ones :)

[@macplastering]

Starting a large cement mixer on site kzbin.info/www/bejne/aZmzaouporljias

[@malachymulhall8012]

Where there is a will there is a way .

[@macplastering]

This is very true words my friend =]

[@macplastering]

A few new videos coming live should be a nice watch :) This Sunday and next :) might be some of my best yet

[@jeztickles4361]

How has he managed to get a mixer into prison? 😂

[@macplastering]

hehe a few guys smuggled a part each LOL

[@jeztickles4361]

mac plastering bet that was painful in the ‘pocket’ 😂😂

[@macplastering]

@@jeztickles4361 LOL

[@conorjackson7245]

Don't try with a petrol mixer, all the oil runs to the head and it won't start

[@HSilver341]

Used one the other day for a floor with a mate did 2tone of ballast it only cost £13.00 to hire bargain

[@macplastering]

+Howard Reeves Oh yes man great for hire and when I remember mixing sand and cement in a wheelbarrow I just love them even more lol did you use an electric one?

[@HSilver341]

mac plastering oh ahh as I remember

[@goldentrowel1968]

They are the shittiest mixers ever made we use them as boat anchors here in Australia.. Great demonstration there a OHS risk look after you back bud when yo set it up

[@macplastering]

Thanks man hope your doing well mate... thing i like about these mixers is they are reliable

[@Tuffjobs]

I don’t agree. It’s great. My one has been awesome.

[@macplastering]

@@Tuffjobs Mine has lasted well for sure

[@gerryadams9868]

Irish accent ?

[@macplastering]

More clear on my new mic on the newer videos :) Thanks for watching :)

[@whathappening5323]

There is an easier way. Watch someone else do it.

[@macplastering]

Never a truer word spoken my friend haha

[@MyTravelVanz58]

That's a hardwork.. Very interesting channel.. keep up the good work.. I subscribed!..

[@macplastering]

+My Travel Vanz Thank you much appreciated :)

[@HSilver341]

Used one the other day for a floor with a mate did 2tone of ballast it only cost £13.00 to hire bargain