13:00 - plan for the stream 18:58 - Miata shirt 26:25 - HappyModel Super X and BlueJay 31:25 - No ESC code in BlueJay 38:42 - How to fix smashed batteries 45:14 - Flying 23500kv 0802 56:12 - 803 vs 603 motors 1:08:43 - Prop weight comparison 1:10:06 - 0802 33000kv weight comparison 1:13:40 - NewBeeDrone Venom props 1:18:15 - Flying 0802 33000kv 1:21:43 - Mobula6 upgrades 1:24:11 - Favorite motors 1:30:22 - Flying 0802 33000kv on triblades 1:34:53 - 802 33000kv on 75mm question 1:45:15 - First look at Meteor75 Air frame 1:49:12 - BT2.0 U cables 2:30:44 - Is removing motor plugs worth the weight savings? 2:32:12 - Flying beat up 0603 motors 3:26:41 - How to test if motors spin freely 3:29:27 - Flying Meteor75 Air with Walksnail
@CiottiFPV7 ай бұрын
Thanks for doing these man, any interest in taking turns with Apache Smoke so that he doesn't burn out on doing them? Maybe you do the ones for the streams you regularly catch and he does the ones he usually catches?
@vpr07 ай бұрын
@@CiottiFPV I can do it for all the streams except the Sunday one, because I watch them in recording. On Sundays it's the only one that's not in the middle of the night for me, so I just chill and enjoy on 1x speed🙂
@CiottiFPV7 ай бұрын
@@vpr0 Apache Smoke says he doesn't mind and will keep doing all the streams so you're free to do whichever ones you want man, I appreciate it a ton :)
@frshagen7 ай бұрын
I connected with a Homie who opened up his own RC drift garage to get some chase footy! 🎉
@CiottiFPV7 ай бұрын
Yessssssssss
@Tokyo_Dom7 ай бұрын
Yo thanks for checking for the Walksnail vtx in the Meteor75 Air frame... I had to bounce after i posted the question. Also the Mipi cable would make that a complete no-go. I was deciding between getting 2 or 4, i think i will just get the two
@CiottiFPV7 ай бұрын
Do you have any experience with the Meteor75 Pro frame? I have a few on the way to try to get some more power out of this god dam thing but I have a feeling they're not gonna be durable enough for jungle gym bashing
@Tokyo_Dom7 ай бұрын
@@CiottiFPV I built one up on analog and immediately pulled it apart.. It's not a 75mm frame it's basically the same size as an 85mm frame but with smaller props. It will have more power than the 75 for sure, but if I am going that big i would rather just fly a 2s 85mm. Others love it though, not sure why.
@CiottiFPV7 ай бұрын
@@Tokyo_Dom dude it's SO MUCH HEAVIER what the HELL were they thinking??? It does make some POWER with great run time though on the 45mm biblades but the weight penalty is probably just gonna be too much
@Tokyo_Dom7 ай бұрын
@@CiottiFPV it's a totally different class of whoop. Tyrantt Fpv does technical indoor freestyle with it but I have no idea how. I know you don't like soldering motors and other silly weight saving measures I do, but I really think 75mm works best if you keep it really light. 27g or less, 450mah on tri blades and it feels poppy even on 20000kv motors
@CiottiFPV7 ай бұрын
@@Tokyo_Dom I'm right at 30 grams with mine, getting down to 27 would be extremely difficult as I'm already on the lightest frame, canopy, AIO, and motors so I'll probably just be leaving it as is. I don't go down the rabbit hole with extreme light weight methods because that leaves me with a rig that has hours and hours of customization in it that when (not if) I break it I'll have to do all over again which in turn leads to my not flying it hard so that I don't break it and what fun is that? :)
@apachesmokewoundedsniper7 ай бұрын
What’s up bro, how are you doing? Another 4 hours? Let’s go😥 00:03:05 On this stream…. 00:05:02 QAVS split top frame get it here. 00:12:12 What are we going to fly 00:17:00 Help Ciotti going. 00:25:03 My final verdict on the pusher 65mm Walksnail build is it flies better than the puller style rigs. I would recommend that build to anyone trying to get somewhat cinematic footage. 00:26:00 Thanks for your help on my build! Was getting 1.5-2 min flight on HDZero fractal65 my happy model FC went bad, replaced with HM Superx 411 hd and plastic frame now I get 3 min flight?? 00:31:22 My mob6 aio came with Blheli_S 16.8, it is not on esc config 00:33:22 What do you think about Pavo Pico and Pavo 20 o3? 00:37:24 Setting the prototype 0802 motor directions in Betaflight and fly it. 00:56:15 I'm hoping for more 803 and 603 motors now that we have HD micros. Like you say that height helps a lot more. 00:57:12 The props held up really well. 01:00:22 A bit struggling with the battery lead. 01:03:19 The HM screws are too short. 01:06:30 Changing the Receiver. Will it make a difference? 01:08:00 Chancing the frame. On 0802 EX 33.000Kv. 01:15:53 Setting the motor direction. 01:17:06 Where should the red dots motor plugs go? 01:18:38 Flying the 0802 EX 33.000Kv. 01:11:58 Is the thrust higher? maybe just lower the pids. If its making more thrust it needs less tune in general 01:13:41 I just got some NewBeeDrone Venom V2 bi blades. Thought I would try them out, haven't yet though. have you tried them, any thoughts? 01:12;14 Have found launch control to be really useful sometimes when escaping those kind of shoe trap crashes… great for scooting out a little from trapping ducts under something. 01:28:18 The dots will only be accurate if you haven't changed any directions in BF or ESC config on the FC before. 01:20:18 Switch to triblade and fly the 0802 33.000Kv rig. 01:33:32 Will the battery win this time 😂 01:34:54 Swapped my 75mm rig to 802 33000kv and I’ve been flying them a bit. Honestly prefer the 1002 23500kv. I think I heard you starting to prefer 802s for 75mm? True or did I misunderstand? 01:38:48 Thoughts about the 0802 EX 33.000Kv. 01:43:18 Male Bag 01:54:40 Pulling the rig apart changing the camera. And weight comparison. 02:00:30 I can bind Meteor with rx_spi_protocol = V202_250k, but don’t seem to bind to Mobula with rx_spi_protocol = EXPRESSLRS. Both were supposed to be elrs bnf. Do you know why? 02:02:35 What are those white motors? look cool I like them? 02:03:33 Ready for something cool?? 02:11:34 The magical difference between beat up motors and fresh motors. 02:14:20 Would an XT30 be the next step up for a high Kv 75? 02:27:48 A drift course just opened a town over from me so I'm going to go check it out and hopefully don't leave with more rc's 02:30:46 Is the weight savings worth the hassle of removing motor plugs? I did it on my first fc but I’m not sure I care to do it for future builds. 02:31:52 Lets fly and see the different. 02:37:54 Yes I meant for the meteor75 air frame, can you check if the Walksnail vtx will fit in the spot for the fc (I like to put the fc underneath). The mipi cable hitting ducts is my concern 02:46:21 Switching to the 75mm Walksnail builds. 03:04:40 what are the weights? 03:10:38 Setting up the motors in Betaflight. 03:13:20 Fighting the props? Here is a tip.(don’t ‘give up is the tip I guess 🤣). 03:23:27 That motor didn’t sound good, let’s see if it’s fixable. 03:29:17 We got lift off finally 😁. 03:35:18 Mirror flip. 03:36:23 Not impressed for the run time. And final thoughts. 03:38:26 Night flight???? Stay safe everyone and have fun flying.
@CiottiFPV7 ай бұрын
Legendary as always man, hey I want to make sure you don't burn out on doing these since I'm sure they take a bunch of time/effort, it looks like vpr0 has been doing a bunch of the recent streams so I asked him above if he has any interest in sharing the work load with you. If you want to keep doing all of them by all means let er rip the more the merrier but I just wanna be as respectful as possible of your time :)
@apachesmokewoundedsniper7 ай бұрын
Im glad to do it, i got time becuase im still down with long Covid (2 years now) so it's good that i can do stuff for you and the comunity @@CiottiFPV
@sirbsgaming93007 ай бұрын
My happymodel elrs accelerometer seems broke. I soldered bt 2.0 but didn't have any flux left so guess I put alot more heat then normal through board. Is heat known to damage the accelerometer ? Is there a way I can fix this ?
@CiottiFPV7 ай бұрын
I've never heard of that happening but anything's possible, I doubt you can fix it man sorry