Maddog IV: Episode Four Installing Mikuni Fuel Pump

  Рет қаралды 23,464

Manuel Flores

Manuel Flores

Күн бұрын

Пікірлер: 33
@seanmayo206
@seanmayo206 Жыл бұрын
Did u fab the license to be there? Mines gen v an thats what i did. I can build. Usually with housing materials but i can do this to
@RemingtinArms
@RemingtinArms 7 жыл бұрын
you may want to consider moving the fuel filter to the line going into the pump, to protect the diaphragm from any impurities in the gasoline starting a micro tear (which will eventually tear through and kill vacuum pressure)
@TolerantTink
@TolerantTink 5 жыл бұрын
yep
@autowill99
@autowill99 3 жыл бұрын
My maddogg goes out if I'm full throttle. Should I get this and that problem will be solved?
@eddiegripps9755
@eddiegripps9755 3 жыл бұрын
They all need to be replaced the chinese parts always fail
@autowill99
@autowill99 3 жыл бұрын
@@eddiegripps9755 i got a better fuel pump. Problem solved
@pasttimes3068
@pasttimes3068 2 жыл бұрын
Could be the carb needs to be tuned... but there are a lot of Basic things that need to be changed on this scooter off the jump
@autowill99
@autowill99 2 жыл бұрын
@@pasttimes3068 ya its been sold tho
@pasttimes3068
@pasttimes3068 2 жыл бұрын
@@autowill99 I've noticed people always buy bikes and scooters and don't keep them.
@gregatron4528
@gregatron4528 6 жыл бұрын
Nice work I like the white w/orange
@RspecNick
@RspecNick 6 жыл бұрын
Gregory Megatron the only bad part is the stock forks and rear shock are trash on these brand new
@eskee16
@eskee16 7 жыл бұрын
Why did you changed the fuel pump??....are you getting a better carb with better jets!!
@TheManuelakis
@TheManuelakis 7 жыл бұрын
Ernesto Ramos I'am planning on getting a better carburetor, should be here next week so expect a video by then 🤓👍 I was also reading that the original Chinese fuel pump eventually fails on you even without any upgrades, so I decided to take a precaution & get a better Japanese fuel pump.
@tonyb704
@tonyb704 2 жыл бұрын
Still got her ? Gonna add this fuel pump to my Gen V
@steves9321
@steves9321 7 жыл бұрын
how fast does this thing get up to?
@TolerantTink
@TolerantTink 5 жыл бұрын
30-40 mph
@Ryan............
@Ryan............ 4 жыл бұрын
@@TolerantTink is it 50cc?
@pasttimes3068
@pasttimes3068 2 жыл бұрын
@@Ryan............ 50cc 32-35 on the road....
@GYccUsefultips
@GYccUsefultips 3 жыл бұрын
What happened to the old pump?I have a new one i have not tried out yet.Is the Kahuni better?
@eskee16
@eskee16 7 жыл бұрын
getting mines in three weeks so thanks for the upgrade videos
@Jovanyiscool
@Jovanyiscool 7 жыл бұрын
Where's the new car and paint job video?? 😮
@MrPhillipg2
@MrPhillipg2 6 жыл бұрын
Hey, I have one like this one, but I want more speed because goes to slow on the Highway I need 30 or 35 mph least
@TheManuelakis
@TheManuelakis 6 жыл бұрын
Honestly bro the best upgrade I have done was buying a NCY 72cc big bore kit, it completely woke up this bike, I can easily do 43mph and have hit 60mph going on a nice hill. There will be more vids coming soon :)
@momil9272
@momil9272 4 жыл бұрын
Revol Tv please upload more videos for this bike!! I got one a couple days ago. I got a problem with it tho. It bogs down when I go full throttle how do I fix it??
@charliemontero1092
@charliemontero1092 2 жыл бұрын
@@momil9272did you change the carb?
@cooleto
@cooleto 4 жыл бұрын
Where did you get the air intake from?
@RspecNick
@RspecNick 7 жыл бұрын
This is dope for sure man I'm about to get one of these I have a 50cc 139qmb that I BBK on my channel but I'm about to get a 150 maddogg and this helps a good bit seeing the layout of it
@telaneywilliams9589
@telaneywilliams9589 5 жыл бұрын
I have a Gen 1 and the tire is rubbing against the rear left strut, do you know what might cause that
@eskee16
@eskee16 7 жыл бұрын
Cool...just ordered the fuel pump and I'm looking of getting the Yoshimura V2 carbon exhaust for my maddog before I get my scooter but I'm looking online to see if this exhaust would fit on the maddog....I saw a video for the rukus installing this exhaust and I figured it's gy6 engine it should fit??...It's a $400.00 exhaust system ....I think I'm going to wait until down the line I see if you upgrade....still going to do more research to see if it will fit but if you hear something hit me up dude...
@pragedisarreguin1196
@pragedisarreguin1196 4 жыл бұрын
you got the big board kit on it after you installed all that stuff how fast does it go
@heylookitsDJ
@heylookitsDJ 7 жыл бұрын
make some shots of you cruising it bro!
@TheManuelakis
@TheManuelakis 7 жыл бұрын
heylookitsDJ I will bro, I'm investing on a GoPro 4 & a full face helmet to make it possible 👍
Icebear maddog no rev limit cdi install
10:54
Rspec Nick
Рет қаралды 6 М.
人是不能做到吗?#火影忍者 #家人  #佐助
00:20
火影忍者一家
Рет қаралды 20 МЛН
黑天使只对C罗有感觉#short #angel #clown
00:39
Super Beauty team
Рет қаралды 36 МЛН
How to Take Out and Repair the Fuel Pump on the Maddog Scooter | 50cc & 150cc | Venom Motorsports
26:01
Icebear Maddog (chuckus) upgrades
13:06
Rimaxi Ruck
Рет қаралды 35 М.
Fuel Pump Installation on a Small Engine
7:32
The Gray Goat Garage
Рет қаралды 176 М.
Honda Ruckus Clone Intake Mod and Upgrade
6:38
Jeremiah Innes
Рет қаралды 44 М.
PROGRAMMING YOUR SPEEDO ON YOUR ICEBEAR MADDOG VER 3 & 4
3:26
Big Belly Racing
Рет қаралды 11 М.
How to Install a Carburetor on the Maddog Scooter | 50cc & 150cc
24:26
Venom Motorsports Canada/USA TM
Рет қаралды 3,4 М.
GY6 Carburetor and Mikuni Vacuum lines Installation
2:36
monsterGY6
Рет қаралды 94 М.
人是不能做到吗?#火影忍者 #家人  #佐助
00:20
火影忍者一家
Рет қаралды 20 МЛН