MADE IN USA - American Truck Construction | Full HD Documentary

Nothing happens in America without the huge trucks. They populate the endless highways and are the means of transport in the USA. To ensure the supply of people and industry, an enormous number of highway trucks are needed - a lucrative market for European truck manufacturers.
Since the late 1970s, the Swedish automotive group Volvo also produces trucks for the North American market. Every ten minutes, a new truck rolls off the line in the factory. Each model can be individually adapted to customer requirements.
This documentary shows how highway truck are built and tested in the US.
📺 watch more documentaries
• Full Documentaries
🔔 Subscribe our full documentary channel
/ @weltdocumentary
#Trucks #Volvo #Documentary

[@WELTDocumentary]

📺 watch more documentaries --> kzbin.info/aero/PL-5sURDcN_Zl8hBqkvZ6uXFpP3t55HU9s 🔔 Subscribe our full documentary channel --> kzbin.info/door/BAeFXaLV1ZqKqc-Uf3pKaA

[@leonpedro1135]

Great video ✅From a technical point of view, the RSI looks promising in favor of the bulls, as the daily RSI is at the bullish territory above 50 (after reversing earlier today). At the same time, the Stochastic RSI oscillator is about to make a bullish crossover at the oversold area. In case this happens, it might assist the market in reaching higher highs. Lots of investors will do so well in the next bull market but you shouldn't be of the mindset to only Hodl, which i see as an odd and old method to make profit because it can be very dangerous when the markets retracts. As hard as it is ƚradıภg Cryptos, it sure is way more lucrative and its' quite logical if you just learn & pay attention to what's going on, I’m not a pro ƚгadēг but I was lucky enough to make 120k usd Bicton worth since late year following the instructions and sιǫnals from results, Mr. Carlos. He has a trading community where you can meet other investors as yourself and to learn how ƚradıภg crypto works, helping them utilize the volatility of the crypto market to make profits daily. You can easily get to him 𝚠нαтαѕαρρ+19715122836 and Instagram @carlos_andrewfx.

[@eugeniorodriguez2207]

Å

[@kaydenaaron2090]

you probably dont give a damn but does someone know a tool to log back into an Instagram account?? I was dumb lost my login password. I love any tips you can give me.

[@walkeremilio6008]

@Kayden Aaron instablaster :)

[@kaydenaaron2090]

@Walker Emilio I really appreciate your reply. I got to the site on google and I'm in the hacking process atm. Seems to take a while so I will reply here later with my results.

[@thecoolannishatk.]

This is a great documentary. I originally got bored of watching the video at the beginning but here am I at 2:00AM and it’s a fascinating video. If I wanted to move out early at my age I’d love to live in one of these glorious VOLVO trucks and do my job from there. I like long, long roadtrips and like to listen to podcasts and the radio while Driving long distances, so I think truck driving is for me.

[@nanchogan3067]

Amazing..... to someone, like me, who has never worked in this kind of environment, it is unreal... the work that goes into organizing everything is mind boggling.... wow, and more wow.

[@kathleenmesser5895]

§wwi MPih🎉

[@mr.voodoo9243]

Not knocking Volvo, but would have loved to see the Peterbilt/ Denton,TX plant. True American classics since the early 1900s.

[@cameronlopez9833]

23:39 it's not a v6 it's a inline 6

[@TheJttv]

These documentaries are all translated. So they all feature silly mistakes, but overall they are way more detailed and less dramatic then American documentaries.

[@enriquenabetse]

@@TheJttv You should see DW docs, make these look more American

[@budwickman446]

I have driven a few Volvo trucks during my carrier as a truck driver, (38 years, I retired back in March 23), they ARE very comfortable to drive, like Mack trucks. They have awesome amenities and are "user" friendly. However, I'm Old School. AND because of that.... I'll still take a Pete with Cat power any day !😉

[@asdsdjfasdjxajiosdqw8791]

Compared to an American manufacturer this is much more advanced. American truck manufacturers are stuck in the immediate post war era

[@Shouk02]

I've replaced enough radiators in trucks to be jealous of the machines that put them together. I wish it were that easy to take them apart.

[@erickrcisneros]

45:26. So beautiful! I love a property like that

[@leonpedro1135]

Great video ✅From a technical point of view, the RSI looks promising in favor of the bulls, as the daily RSI is at the bullish territory above 50 (after reversing earlier today). At the same time, the Stochastic RSI oscillator is about to make a bullish crossover at the oversold area. In case this happens, it might assist the market in reaching higher highs. Lots of investors will do so well in the next bull market but you shouldn't be of the mindset to only Hodl, which i see as an odd and old method to make profit because it can be very dangerous when the markets retracts. As hard as it is ƚradıภg Cryptos, it sure is way more lucrative and its' quite logical if you just learn & pay attention to what's going on, I’m not a pro ƚгadēг but I was lucky enough to make 120k usd Bicton worth since late year following the instructions and sιǫnals from results, Mr. Carlos. He has a trading community where you can meet other investors as yourself and to learn how ƚradıภg crypto works, helping them utilize the volatility of the crypto market to make profits daily. You can easily get to him 𝚠нαтαѕαρρ+19715122836 and Instagram @carlos_andrewfx.

[@aliozanerbektas]

This so much freedom!

[@KamSingh-up9lg]

You got it wrong , a long haul trucker is on camera and have no privacy at all , in built video cams are remotely watched ..

[@patgilchrist9339]

Brilliant documentary. Vielen dank.

[@WELTDocumentary]

Bitteschön, you are welcome.

[@TheJttv]

Those Cleco tools are something else... and cost a fortune.

[@soldierofodin6769]

Amazing factory! Would it be possible to make a video on how such a factory is build?

[@sofjen]

Much respect to the American expertise and development of the greatest trucks in the world and high reliability

[@larrygardiner6577]

It drives me nuts when people don't know the difference between a bolt and a screw. @ 5:32

[@donotneed2250]

About like going home when I saw the Dublin plant. The first time I saw that plant it was called White/GMC and I was in one of their cab-overs making a delivery of parts. That was 1992. Sometimes I'd make a delivery and then pick up a load of engine or transmission shipping supports to take back to the shipper. Or it could be a load of empty bins to take back.

[@donaldhart2400]

Thanks

[@DJea-ni2yk]

I'm leaving, you can KEEP the head banging background NOISE!!!

[@garethifan1034]

Volvo showing the way in America - God bless Sweden!!!

[@garethifan1034]

@Tommy Damron Petrbuilt powered by D A F (Paccar) engines built in Holland!!! Ha Ha!!

[@cyrillanicoche1490]

Those Cleco tools are something else... and cost a fortune.

[@bigdl72]

i actually delivered engine blocks to the hagerstown md factory. really nice folks. that place is absolutely huge!

[@SermiFromAlbania]

WOW SO MANY COMERCIALS

[@skyline3071]

FH16 ENGINE 🥰🥰

[@peredavi]

Very impressive. Beautiful trucks. Nice creature comforts. Amazing that they are automatic transmission now. My Ford F150 10 speed w 3.5 L Ecoboost is smoothest and fastest accelerating vehicle I’ve owned. That’s pretty cool with the couples driving/living in the truck.

[@EnjoyFirefighting]

I've never driven a pickup so far, but I guess anything larger than a midsize pickup will take quite a lot of fuel when driven at top speed on the highway ^^

[@sharoneddy8238]

I love production work

[@jeanmeslier9491]

My Aunt and Uncle drove trucks in the 1930s and 1940s. There was no thought for driver comfort. The trucks didn't have heaters, even. At least Americans had closed cabs. In the UK and Europe, many trucks had open cabs. Sometimes there was a roof for the driver. I remember when if a truck was near the Mexican border, the driver crossed the border to fill up on state owned Pemex Diesel. In the 1960s it was 10 cents a gallon. I think gasoline was 10 cents also.

[@gb23a]

If you need a job that requires little skill and pays somewhat good does the job for you. They are definitely very easy to drive. I understand why they say 60% of the accidents on the road are caused by trucks. If that's true that shows you the quality of people they have doing that job

[@maestrovso]

The narrator does not know the difference between a V6 and an I6, nor screws and bolts. OK, it may be the handy job of the well paid copywriter.

[@leonpedro1135]

Great video ✅From a technical point of view, the RSI looks promising in favor of the bulls, as the daily RSI is at the bullish territory above 50 (after reversing earlier today). At the same time, the Stochastic RSI oscillator is about to make a bullish crossover at the oversold area. In case this happens, it might assist the market in reaching higher highs. Lots of investors will do so well in the next bull market but you shouldn't be of the mindset to only Hodl, which i see as an odd and old method to make profit because it can be very dangerous when the markets retracts. As hard as it is ƚradıภg Cryptos, it sure is way more lucrative and its' quite logical if you just learn & pay attention to what's going on, I’m not a pro ƚгadēг but I was lucky enough to make 120k usd Bicton worth since late year following the instructions and sιǫnals from results, Mr. Carlos. He has a trading community where you can meet other investors as yourself and to learn how ƚradıภg crypto works, helping them utilize the volatility of the crypto market to make profits daily. You can easily get to him 𝚠нαтαѕαρρ+19715122836 and Instagram @carlos_andrewfx.

[@jackgt140]

Anyone else cringed when he put the impact wrench on the Freshly painted bonnet

[@leonpedro1135]

Great video ✅From a technical point of view, the RSI looks promising in favor of the bulls, as the daily RSI is at the bullish territory above 50 (after reversing earlier today). At the same time, the Stochastic RSI oscillator is about to make a bullish crossover at the oversold area. In case this happens, it might assist the market in reaching higher highs. Lots of investors will do so well in the next bull market but you shouldn't be of the mindset to only Hodl, which i see as an odd and old method to make profit because it can be very dangerous when the markets retracts. As hard as it is ƚradıภg Cryptos, it sure is way more lucrative and its' quite logical if you just learn & pay attention to what's going on, I’m not a pro ƚгadēг but I was lucky enough to make 120k usd Bicton worth since late year following the instructions and sιǫnals from results, Mr. Carlos. He has a trading community where you can meet other investors as yourself and to learn how ƚradıภg crypto works, helping them utilize the volatility of the crypto market to make profits daily. You can easily get to him 𝚠нαтαѕαρρ+19715122836 and Instagram @carlos_andrewfx.

[@cpkoch]

A new truck leaves the factory every 5 - 10 minutes or every 4 minutes (as stated earlier)

[@Demonslayer20111]

a cab is mated to a chassis every 4 minutes, but yeah even that doesnt add up

[@mehrojsharofiddinov276]

CIA is that same video from Free Documentary about The Making of a America Truck?

[@mohammadayub2760]

Adnan loves volvo and I love my son adnan ♥️♥️♥️♥️♥️♥️♥️♥️

[@DavidsonMott]

The human operated crane that moves the pallets into the racking is called a Turret truck......

[@Eagle1ZX]

This such a great documentary.

[@russianbot1987]

We all know you wanna keep your 1989 Pete or KW but this is just a documentary showing how they put trucks together not talking you into switching. Enjoy

[@gilsanchez5670]

MADE IN AMERICA US THE BEST 🇺🇸💪👍🇺🇸

[@mpowerrr]

Before this video I watched the one of Mercedes trucks. I think there is a lot to gain for this Volvo truck factory in every part.

[@sebbef82]

yes, it comes down to investment, to make those last 10% of an assembly line automated it cost a lot of money, sometimes a human is just the way to go, also for the communty. A lot more flexible, but yeah, the Mercs video is nice.

[@stevenvalvana2024]

BADASS.

[@SuperBigblue19]

I drove OTR 25yrs. My first truck had a 48" coffin bunk & no storage. And that was in 92 Now? 80" reclining beds TV, Micro, Refer standard. I was born too soon.

[@bigjuice7020]

Looks like a fun good paying job with benefits!

[@viqq183]

Oh the renault truck engines getting some proper use

[@avail1.]

Very Nice 860 😁🖐

[@rodrigofernandez9800]

I douted that was America, but when I saw the obesse workers I confirmed it

[@KeynaPurvis]

cool

[@lebohanganesubingwa5474]

After waatching the "Mercedes Benz Trucks" docu I can only say the difference in demographics between Germany and USA are obvious. With all respect and out of genuine concern, I would advise the American society to pay attention to their diet and adopting a healthy lifestyle. This is one great nation with a whole lot of great people and stories to tell.

[@whatislifebuttheenjoymento3405]

The Quality of truck matters.. and Germany is known for producing the best quality cars and trucks.

[@lilcourtny08]

@@whatislifebuttheenjoymento3405 hell no

[@whatislifebuttheenjoymento3405]

@@lilcourtny08 no??? Do you really want to argue about that fact?

[@lilcourtny08]

@@whatislifebuttheenjoymento3405 name a very reliable German car that last as long as a Honda Accord or Toyota Camry with very little maintenance and doesn't require large sums of money to maintain. BMWs and Mercedes drop like a rock in value, not worth keeping after the warranty expires

[@whatislifebuttheenjoymento3405]

@@lilcourtny08 they are expensive of course, but they are build with quality. German and japan cars are better than American cars. You can't argue about that its a well known fact.

[@jeepinjohnny2898]

Very interesting vid but PLEASE cut out that damned background racket (music).

[@DJea-ni2yk]

I just don't understand WHY they find it necessary to put that distracting, completely unnecessary ?"music"?, in this or any other video for that matter! I couldn't take any more of it after just one minute.

[@jeepinjohnny2898]

@@DJea-ni2yk there must be some kid directing the editor ap they use. Thanks for replying.

[@ctdieselnut]

27:10 - the slapping robot lol

[@nescifu1845]

nice

[@flyingchic3n]

Mike is out here doing god's work

[@InTheDogHouse3DPrinting]

I am going to have to get hold of Volvo and see if they need someone to test drive their trucks and transport them across the country. Been a truck driver off and on for 37 years. Was a driver before CDL's were mandatory. I started out with a Chauffers license.

[@alexm566]

wow, can't imagine driving those was allowed without mandatory training

[@davidholder3207]

Title should have been "Volvo Trucks - Assembled in USA"

[@MrAndriy1982]

Also all new Volvo trucks come with engine check light included 😂😂😭

[@nickacelvn]

Not that they would hardly ever need it

[@markomare9081]

99% trucks on the road, volvo had check eng😄

[@dash8465]

Yep.. diesels have been so badly ruined by the EPA-types that Caterpillar quit making on-road truck engines entirely, not worth the hassle… all the emissions stuff chokes the mileage, power, reliability and longevity of modern diesels, plus they cost twice as much and are impossible to fix without a dealership computer and massively high labor rates. Trucking - with driver hours limited by law - are perfect candidates for electric power in the very near future. Screw diesel and the EPA…

[@soroushzaker4173]

😂

[@angelgjr1999]

@@dash8465 It’s the DEF. It destroyed a bunch of our fleet.

[@awax2585]

Now compare this with the Mercedes factory in Germany. Now emergency parts picker, no robot breakdowns and the workers are supermodels compared to the ones in the US ...

[@AlexKall]

Or any other Truck manufacturer in Europe. They do it differently in US.

[@terrypbug]

I Thank God I was born American everyday

[@r.m.9450]

Much better assembly process,

[@alexm566]

I am with you except the supermodels part, unless you mean there are no uniforms in the US one. It could be the Europe one they showed those supermodels and not the part were refugees off the boat work or whatever.

[@alexm566]

@@DavidSJr shhh you're violating the security protocol (and plenty 12yo are actually believing you)

[@dubscope2246]

Liters ... welcome to the world

[@milxl]

35:50 also because it is safer for cross traffic visibility in denser unzoned cities

[@sterlingodeaghaidh5086]

Personally, I prefer the hood, the cab-over designs are great but regardless of how safe they are they look like they can do a front flip really easily. But this is also because I am used to the hooded trucks being from America.

[@bldlightpainting]

Driverless vehicles are insanely dangerous and unnecessary, as exhibited by the several people killed from Tesla autonomous vehicles.

[@shawnheaps8554]

Did find the video interesting but after watching the video about Mercedes Benz semi trucks I would have to say on the Volvo trucks there’s to many hands on . I drove and owned Peterbilts for over 35 years and I knew quite a few guys that owned Volvos and they didn’t have a lot of pleasant words for them but when they lived in Europe they loved them.

[@Giggidygiggidy12]

I've heard the opposite, Volvo semi are supposed to be the Cadillac of semis, unfortunately they're also the most expensive

[@shawnheaps8554]

@@Giggidygiggidy12 Your entitled to your opinion but by reading your comment you’ve never owned or operated a tractor?

[@bubblehead78]

Great video, but they are BOLTS, not SCREWS.

[@MORES1971]

at 12 minutes you show and say that the 860 model is the largest, but inside you show 760! what's going on, people are being misled! why don't you show 860 what it's like inside, with a large table and a large fridge, and only the smaller 760 doesn't understand it! I'm not interested in the 760 inside, only the 860! If you say 860, show 860, not 760! 😠

[@lourias]

This video has almost identical wording as their video on the Mercedes trucks.

[@martinbyrne5626]

The guitar soundtrack. Jesus. Why?

[@leonpedro1135]

Great video ✅From a technical point of view, the RSI looks promising in favor of the bulls, as the daily RSI is at the bullish territory above 50 (after reversing earlier today). At the same time, the Stochastic RSI oscillator is about to make a bullish crossover at the oversold area. In case this happens, it might assist the market in reaching higher highs. Lots of investors will do so well in the next bull market but you shouldn't be of the mindset to only Hodl, which i see as an odd and old method to make profit because it can be very dangerous when the markets retracts. As hard as it is ƚradıภg Cryptos, it sure is way more lucrative and its' quite logical if you just learn & pay attention to what's going on, I’m not a pro ƚгadēг but I was lucky enough to make 120k usd Bicton worth since late year following the instructions and sιǫnals from results, Mr. Carlos. He has a trading community where you can meet other investors as yourself and to learn how ƚradıภg crypto works, helping them utilize the volatility of the crypto market to make profits daily. You can easily get to him 𝚠нαтαѕαρρ+19715122836 and Instagram @carlos_andrewfx.

[@legoovernightbuilder8518]

Too many people working in this facility they need robots 🤖 looks like 19 century

[@leonpedro1135]

Great video ✅From a technical point of view, the RSI looks promising in favor of the bulls, as the daily RSI is at the bullish territory above 50 (after reversing earlier today). At the same time, the Stochastic RSI oscillator is about to make a bullish crossover at the oversold area. In case this happens, it might assist the market in reaching higher highs. Lots of investors will do so well in the next bull market but you shouldn't be of the mindset to only Hodl, which i see as an odd and old method to make profit because it can be very dangerous when the markets retracts. As hard as it is ƚradıภg Cryptos, it sure is way more lucrative and its' quite logical if you just learn & pay attention to what's going on, I’m not a pro ƚгadēг but I was lucky enough to make 120k usd Bicton worth since late year following the instructions and sιǫnals from results, Mr. Carlos. He has a trading community where you can meet other investors as yourself and to learn how ƚradıภg crypto works, helping them utilize the volatility of the crypto market to make profits daily. You can easily get to him 𝚠нαтαѕαρρ+19715122836 and Instagram @carlos_andrewfx.

[@angelgjr1999]

Did you not watch the video? Robots break down and halt production. Even Elon famously said humans are underrated.

[@AK-American]

You wouldn't think it was to many if it was YOUR job being replaced

[@DanielPEdge]

The video is older than a year because, Chuck Wilson sold Wilson Trucking to Central Freight Lines in 2017 had he not sold he would have shut the company down...

[@alexmalone1642]

NH it's a variant from Volvo Fri N 🇺🇸

[@r.m.9450]

Nice looking truck however bigger is not always better. One thing it has is a very outdated dash board. Look at the ATROS First Edition. That is what a interior should look like,

[@helenafranzen9828]

Or a Scania NextGen.

[@user-yg2up4lg3r]

Do some nuclear power plant documentaries please

[@carscloseup]

“13 liter V6”?? It’s obviously a straight 6…..

[@flyonbyya]

At 23:38…the voice over guy says “the V6”. It’s a straight 6

[@jamesfleming5807]

Volvo the most calculated engine l have driven

[@edtad9549]

Volvo makes the best trucks.

[@KuroRyuu86]

Wow so, I watched the Euro Docos, on Volvo and Merc and this factory needs more automation. But also i guess its good you have Human workers too. I didnt like how that worker put a hand tool on the bonnet of the truck before fixing a grill. Also workers are casually dresses LOL. FREEDOM i guess.

[@YPO6]

It''s nice to see people have jobs, especially outside China.

[@RellyOhBoy]

We believe in employing Humans, NOT robots...and we don't have "Bonnets & Boots"...We have "HOODS & TRUNKS" DAMMIT...!!

[@davemacnicol8404]

Lol damn right if I'm building a truck like that im wearing whatever I want. I think it's funny that's a concern of anyone? Kinda bourgeoise lol

[@angelgjr1999]

Be grateful there’s still middle class jobs. They haven’t shipped everything to China or Mexico…yet.

[@herowillrose3198]

I am in loving Volvo Truck with the way Volvo Engine at 13 liters V6 beautifully manufactured looks right form and shape. In the future, if I have a chance to purchase Volvo Engine, I will install in my boat, no explore vessel with dual engines. The engines well engineered and well assembled. Also, will have a custom camper Volvo truck with 4X6 wheels travels in north American and Asia.

[@leonpedro1135]

Great video ✅From a technical point of view, the RSI looks promising in favor of the bulls, as the daily RSI is at the bullish territory above 50 (after reversing earlier today). At the same time, the Stochastic RSI oscillator is about to make a bullish crossover at the oversold area. In case this happens, it might assist the market in reaching higher highs. Lots of investors will do so well in the next bull market but you shouldn't be of the mindset to only Hodl, which i see as an odd and old method to make profit because it can be very dangerous when the markets retracts. As hard as it is ƚradıภg Cryptos, it sure is way more lucrative and its' quite logical if you just learn & pay attention to what's going on, I’m not a pro ƚгadēг but I was lucky enough to make 120k usd Bicton worth since late year following the instructions and sιǫnals from results, Mr. Carlos. He has a trading community where you can meet other investors as yourself and to learn how ƚradıภg crypto works, helping them utilize the volatility of the crypto market to make profits daily. You can easily get to him 𝚠нαтαѕαρρ+19715122836 and Instagram @carlos_andrewfx.

[@georgeblackwoods8755]

Basically a plant which is meant for humans! Good job volvo the workers look more relaxed than the germans

[@wontee2]

Couldn't watch it. Effing background music.

[@jimmyw7291]

I understand osha Regulations in all Where can many factories and steel mills That being said a hundred and thirty pounds is not heavy One man can do that job Doesn't take five

[@musicfan6575]

The Mercedes Truck plant is a well oiled Machine compared to the Volvo Plant in the States. I love my Country, but Germany is on the Ball.

[@alanmay7929]

volvo is the best at manufacturing specially in sweden

[@gntdriver2840]

After a new truck is delivered to the customer what happens to the large orange coloured couplings ? is it somehow returned to the factory ?

[@donotneed2250]

Yes.

[@jackiechan_wtf4041]

Have you notice the assembly workers are wearing "street clothes"? There are many ways companies can cut down on yearly operating cost, and one is no uniforms.

[@TheJttv]

Factory is probably 100*F

[@alexm566]

Uniforms got adopted by schools and by factories to make everybody look equal regardless of their personal well being or how much they like to spend on clothing. Also, in aerospace they get tweaked e.g no pockets to avoid things falling inside the airplane engine. This is indeed a cost cutting measure.

[@donotneed2250]

They are dressing the same way they did when it was called White/GMC.

[@deaddoll1361]

@@alexm566 Ironically, some schools like to crow about how they embrace individuality, while concurrently enforcing a strict uniform and dress code

[@alexm566]

@@deaddoll1361 Unless all the students have rich parents, schools should always have a uniform to avoid embarrassing or hazing for kids who can't get fancy clothes. It has nothing to do with individuality. In college things are more relaxed because at that age people tend to not care much about small things compared to school kids.

[@sihebat1]

I need to order this truck's engine for my minivan.

[@KamSingh-up9lg]

It drinks dollars

[@billbergen9169]

PLZ do a peterbuilt 389 factory documentary

[@vititthach4067]

J0

[@vititthach4067]

J90

[@vititthach4067]

?ဤ.! ၎

[@vititthach4067]

.

[@vititthach4067]

,.a,,!

[@MeThorvald]

I'm almost certain that the limits on length of the truck are made by Brits, for their narrow ass roads on the countryside. Even European trucks have problems...

[@barriewright2857]

Yep have to agree as a old UK trucker , you can not go into small villages, towns ,or certain city areas due to the size which was 38 tones when i started then they moved to 44 tone, but they did try to get 60 tone units that`s basically a road train ! , but they banned it due to the fact that a lot of the bridges are some were between 100 to 300 years old and a lot of building are some were between 100 to 800 hundred years old , and these modern trucks would have destroyed them shaking them to pieces . So most of the trucks stay on the modern highway/freeway and are only allowed on to modern industrial sights and the outskirts of big city`s and towns .

[@MeThorvald]

@@barriewright2857 Funny thing is that American trucks often weight less than European, and despite having big engine they are more environment friendly :3

[@thomasnorb4077]

@@MeThorvald Hilariously wrong! You clearly don't know anything about what's environmentally friendly or engines.

[@user-vu6sd9hi5x]

What's about the g x I never hear u talk about it

[@wesley100011]

but what do they do with the red bar??

[@cucnguyen-om7bd]

Volvo Truck it new

[@larrygarcia9048]

MR ROBERT and his team helped me make money online till recent time. Despite the Covid-19 He is honest, brilliant, experienced, and even hardworking with this type of trades. The few times I have known this man has been my best moments because each time when I cash my profits $30,000 successfully, I have the opportunity to care better for my family. Mr Robert, has proved to me that you do not need any qualifications before you can become a good success investors in the forex field. I want you to learn from this man and become a good earner .contact Mr Robert Larrisson through INSTANGRAM {robertslarrison}

[@flyingchic3n]

t"his is what men in the factory call the process of joining the chassis and the cab" I think something was lost in translation there english -> german -> english

[@johnobrien9718]

A video of American truck's, and they focus on Volvo?? Smh...

[@sebbef82]

Just a better investment, plain and simple...

[@EnjoyFirefighting]

they focused onto Volvo trucks made for the American market, that's it ...

[@brentdallyn8459]

Watched the one on Mercedes Trucks in Europe before this one, what a difference. The Mercedes plant is polished and precise, as you would expect a German plant to be, with a level of automation that would make GM blush.

[@emergencylowmaneuvering7350]

It is a factory. Cleaning up is at end, and you dummy will pay more so a factory can have cleaners picking up things round the clock. Are you a woman ? Superfluous idiots..

[@brentdallyn8459]

@@emergencylowmaneuvering7350 Look up the meanings of big words before you throw them around, idiot.

[@emergencylowmaneuvering7350]

@@brentdallyn8459 What a chithead you are. Cant write it right way due google make me change it..

[@brentdallyn8459]

@@emergencylowmaneuvering7350 don't make excuses, ever heard of a thesaurus? Dumbass

[@emergencylowmaneuvering7350]

@@brentdallyn8459 LOL..

[@kelly00000111111]

Didn’t know they built Volvo trucks in good ole Virginia

[@donotneed2250]

You can see them as you go by on I-81. In some of the test track shots you can see the interstate traffic rolling by.

[@yamahonkawazuki]

32 extra strong screws or bolts? 5:30

[@donotneed2250]

I think that was for the women watching since a good many don't know the difference. I know my mother didn't.

[@stevenvalvana2024]

Im happy to see its not Chinese.

[@siglavikingkearns8108]

I'm not a trucker but......didn't North America used to have a lot of cab-overs? When and why did we change? I understood that length limits were increased.

[@donotneed2250]

Yes. My first over-the-road company had White/GMC cab-overs. In the mid 1990s they started phasing them out. I think J. B. Hunt and Schneider National were the last ones to stop ordering them.

[@cvetislavsvilenov2768]

The Volvo fh16 has 750hp

[@michaelcomisse9478]

These so called documentaries are great. It does seem like you use a so called phrase so called so called

[@hunterlacost2649]

I’ll stick to my 389 flat top Peterbilt 310” wheelbase with a C15 CAT engine. You door swingers Swift drivers can have the Volvo

[@sarmn4397]

Why do these videos always mention how much HP the engines make but not the torque? These are trucks, those hp numbers mean very little, these engines are putting out up to 1850 lb of torque!

[@donotneed2250]

When truck drivers and mechanics talk engines foot pounds of torque rarely mentioned. It's horse power! It used to be a 425 horse powered engine was a big engine but not nowadays.

[@radiobelzebub]

How many Americans is needed to fit 60 kg bunk bed? Minimum 4, but 5 or 6 is better. :))))

[@CrookCountySoftwear]

Thanks for the hp rating but, it would of been nice to hear the torque rating sense i can care less about hp rating.

[@blah36501]

around 1300 to 1900, d11 to d13

[@wopmf4345FxFDxdGaa20]

HP is just torque multiplied by RPM. High torque at low rpm means the engine has a lot of HP at low rpm.

[@dyzoly]

Oh no, the cabin's not dip painted? How do the closed box sections get painted? They aren't? :)

[@sharoneddy8238]

Big bucks and sells them on the idea where you’re going to put it

[@tonybrown3184]

That annoying music made it impossible to watch for me, I lasted ten minutes 😔 pity, I was looking forward to watching this

[@nunstersplace]

you don't want a Volvo, you just end up with a Volvo.

[@sebbef82]

Yeah, the company want less problems, not a massive T-truck boner. Same as american cars and and american motorcycles, just not good enough for this century...

[@Giggidygiggidy12]

@@sebbef82 what?

[@KostjaKlyzhevGarmatnij]

36:33 u see that ? he put the drill on the hood