Homemade Snow Plow from Scrap

In one of the previous videos, we made an electric multi-truck wheelbarrow and today we're going to show you how we built an electric snow plow for it.
• Electric + Hydraulic =...
The basis for this project is a water boiler heater which I found at the junkyard.
The sheet wall thickness is 2 mm, which is sufficient for so many reinforcements.
The 8 inch electric cylinder is the perfect size for this plow.

[@DonnDIY]

You got the snow dump too I see. Nicely done and just in time.👍

[@JeffPedlow]

Maybe the 4x4 UTV needs a snow plow :D I need all the good plow blade ideas i can get lol ;)

[@DragonFlame0909]

ma ei tea kuidas lõunas lood aga keskel lund üüratult palju ..seega ruttu uus video teele ka sinu poolt .... :D

[@randytravis3998]

I am in Western NEW YORK i have over 2 feet in snow in my driveway .. temps below -0 degs fahrenheit been a rough winter .. most of the time my shop is warm good old firewood ..

[@randytravis3998]

@@JeffPedlow Donn DIY did build a plow for the UTV 2 parts ..

[@MadeinPolandChannel]

Thanks Donn 😉

[@denniswhite166]

GREAT use of a discarded hot water tank. I love your ingenuity!

[@silvergrizzly316]

How I wish we had one of these growing up, it surely would've saved a lot of backache and would've had more time for play!! AWESOME BUILD!! 👍👍

[@Crewsy]

What? You mean all that time shovelling snow when I was a kid wasn't playing outside like my parents said it was? 🤔

[@silvergrizzly316]

@@Crewsy Wayne, all these years, I'm afraid you've been lied to😲Wait a min, are your parents... REALLY YOUR PARENTS 🥺🥺🤪

[@Crewsy]

@@silvergrizzly316 🤷🏻‍♂️ 🤣😂🤣😂

[@zbudujsamdom]

Matko Bosko Częstochowsko niedługo czołg zbuduje 💪

[@daniel-qe8lx]

oby !!!!!!! czekam !!!!!!☺☺☺☺

[@baranek110]

czolgow jest duzo, wolalbym ladowarke z filmu obcy 2 :D

[@arturlend2297]

Zbuduj sam dom - ja już kiedyś pisałem że On jakąś rakietę zmajstruje, i czekam na nią jak na zbawienie 😂

[@Sesek1111]

Przydałaby się jakieś uzbrojenie. Podobno wojsko wysłało wszystkie czołgi na granicę z Ukrainą, obydwa.

[@zbudujsamdom]

@@Sesek1111 xD

[@davidmunro1469]

Poland has brilliant mechanics and some of the best pilots on the planet.

[@kacperpiotrowicz7888]

Poland is also known for its beautiful women ;)

[@joshbrucksch]

Very awesome! Genius use of an old water heater....got me thinking about trying something like this for my riding mower. Thanks for sharing!

[@chrismaurer2075]

I worked with a couple guys from Poland and Russia when I was a draftsman at GM and I have to say that they were all the smartest guys there. Very nice design and build.

[@nickbremner6274]

Very neat construction and it looks necessary there in Poland at the moment. Well done.

[@Erik-pr2rf]

nicely done and nice use of an old electric wheelchair with the Tilt Chair function and a hot water heater . just an FYI you wanna put your plow blade down onto at ground (like right as you come out the garage ) so you can get more slow pushed away ( retired plow truck driver) and tilt your lights a lil up ya dont want them facing down raise like half an inch just a suggestion so you can get better plow coverage and better lighting .

[@paulhorror939]

Jestem pod wrażeniem kusztu konstrukcyjnego. Jednak bym go zmodyfikował, lepiej jeździć niż chodzić 😁. 👍👏

[@stalka6]

Pewnie prototyp😀👍

[@tytonieja6657]

To może "Izera" jest?😁

[@DaBuzz92]

Poczekaj aż połączy wszystkie projekty w jeden :D

[@eathans_small_engines8665]

I like how well built it is!

[@willwade1101]

Nice work. I would never need anything like this because it only snows here once every 20 years or so. If there is a dusting of snow on the roads, we shut down everything around here. Well, not the bars or churches but definitely the schools.

[@ProlificInvention]

I have an old hand tractor that I've been considering making a plow for: you have inspired me to do just that. Awesome video as usual *Made in Poland*

[@TheFurriestOne]

Awesome repurposing, this is the kind of recycling I love most! The most efficient way, too.

[@drummerman1206]

I’ve never heard a dog bark in Polish before. That was so cool. :)

[@MateuszDoniec]

Cała okolicę teraz chłop odśnieży 🥰

[@MadeinPolandChannel]

Akurat śnieg topnieje 🤣

[@حسين-ج9ط7ي]

Great job, thank you brother. You are so talented

[@tobygathergood4990]

Excellent! However I do think that you need a tilting mechanism for the blade to change it's angle off attack to the ground. I discovered that when I made my own unit. Three adjustment profiles are needed. 1) Entire blade up and down 2) Blade side to side angle , and 3) Blade to ground angle. I also employ hydraulic pressure to keep the blade down so that it doesn't lift and bounce over ice, but cuts through them.

[@madanski]

Good job. Well done. I think the next level is to build a homemade mini excavator for garden jobs.

[@АндрейСтракашин-ж7о]

Прекрасная работа. Молодец. Золотые руки. 👍👍👍👋👋👋🤝🤝🤝

[@Dudleymiddleton]

That cylinder would make an awesome barbecue, too - but weather permitting!

[@WorkshopFromScratch]

Super !!! 😁

[@eddierodriguez419]

MY friend YOU ALWAYS AMAZE ME WITH THE VIDEOS U PUT OUT 🙏🏼🙏🏼🙏🏼 .. THANKS 👍🏼👍🏼

[@anthgalay]

Thank you from Saudi arabia

[@azetosiemszesc]

Zacne wykonanie.Musisz być ulubionym klientem lokalnego składu stali,bo przy takiej ilości projektów chyba jesteś tam częstym gościem😉

[@Happyfacehotwheels]

Boy, I could've used that yesterday! Nice job as always. It Would be cool to see your design progress for all these cool projects. Thanks

[@LariFariYoutube]

Heyyy...thats a really useful snowplow. I built the same thing, a while ago. But as an attachement for the Forklift. I was able to utilize the hydraulic side shifter to swing the plow left to right. Driving a snow plow is so much fun. xD ....Cool project...Greets from Germany.

[@robertogonowski9027]

Bardzo ladna robota, mala porada, punkt mocowania na szufli obnizylbym do dolu , pozdrawiam

[@СамоделкинКузнец]

Супер!! 👍👍👍 Это как раз по нашей зиме 😊😊😊

[@YamahaYZFR6RJ05]

awesome work and nicely integrated into the dump chassis. now you need some lifepo4 cells and a bms instead of the old lead acid battery. lighter and all 100% useable instead of 50ish% on lead acid

[@rodrigoap4306]

Meu amigo você é um gênio, parabéns sou teu fã. Sou do Brasil...um forte abraço.

[@АндрейЧеркесов-ц8ъ]

Всегда сделано профессионально с творческим подходом!!!!!

[@horstszibulski19]

Best thing about it is that you won't wake up your neighbours while plowing snow in the morning! :-D Great addition to the e-wheelbarrow! :-D

[@jimsvideos7201]

The best part is that if you need more traction you can add more batteries!

[@davidkarath6549]

Another nice product...! 👍

[@stevewimmer8285]

Wish I had a shop with all the tools..could I make stuff!

[@mudnducs]

Well considered and nicely made. Good job! 🙂👍

[@mwigmedia]

Nicely done!

[@MadeinPolandChannel]

Thanks!

[@mouseinthefalls7836]

Not bad at all.... I like how you keep it simple and that it works for you.

[@Pesiy]

I need this thing badly in Canada! 😄👍🏼

[@steve6886]

. THATS BADASS & QUIET

[@DanKoning777]

Make and sell the base units like the one seen here, then make/sell quick change attachments like: this plow, posthole diggers, single stage snow blowers, etc. I'd start with patent issues, and go from there. *Great job/lots of potential.*

[@miniblasan5717]

Those flashlights would've been a must in Sweden because in the southern Norrland region you get 5-7 hours of daylight while in northern Norrland region you get 2-4 hours of daylight.

[@MCsCreations]

Awesome work, dude! Nicely done!!! 😃 Stay safe there with your family! 🖖😊

[@viorsa8200]

Excelente proyecto muy bien desarrollado y mejor ejecutado , da miedo ver ese quitanieves , gracias por compartir tanta creatividad y conocimientos , un saludo cordial y por supuesto un gran like desde Narón , Galicia (España) 🤓 🛠️

[@stolaircraftsuyanto9728]

Я хочу сделать это, но здесь нет снега, только кубики льда из холодильника 🙏👏😀😀😀😀😀

[@petericemanczyl2139]

One word describes this, INGENIOUS! It is definitely, 'Think outside of the box.

[@mateuszgorecki79]

Tyle roboty a tu roztopy :-), a tak na serio to fajny projekt!

[@ultimatesoccershow]

Super cool video man & great design. I live on the land and plough my own snow roads.....

[@gotzolones]

You are an artist

[@ДмитрийГородец39]

Молодец поляк. Толковый мужчина.

[@tobiasmaier2884]

Continuously impressed by your work

[@andrej.babichev]

Хорошо, когда есть где спиздить такой классный баллон)

[@yodasbff3395]

Nice work 👍, looks great.

[@pierxxxx4636]

Wielki szacunek dla Pana za pomysł ✋✋✋✋✋

[@SILVESTROThingS]

The best scene is in the street. Everything works. But in my opinion, the hitch system is too long and unstable, the lifting system works, but it does not ensure the plow's pressure to the ground, I do not know, maybe this is the assumption not to damage the thin rubber skid, I would make myself of a thicker rubber. I like the idea of the vehicle, and I can immediately see here a horizontal rotating brush for sweeping the yard and sidewalk. Greetings from Poland :)

[@Kalinin]

Нижняя часть должна выдвинута в перёд по отношении верхней, всё проверенно

[@kingvlog3089]

Nice JOB BROTHER I AM YOUR BIG FAN FROM NEPAL😎

[@tomm9860]

You done an excellent job on this product. How ever the plow i way to heavy and rugged for a driveway. it would be fine for leaving dirt/gravel.

[@vladpinchuk]

Great! now this thing can be sent to Mars 😂 Brillian as always 💪

[@Celebrimbor3]

Useful tool for this season of the year ❄️

[@charlesemmer8856]

This plow would be even better if you could put tracks on it. Really nice construction, I have watched all of your KZbin videos.

[@АндрейЮнолайнен-б5ы]

Осталось дело за малым... Приварить площадку и перестать ходить за этим чудо-агрегатом. )))

[@wdrewnowziety5271]

Ta platforma samojezdna powinna nazywać się M.O.P.S.-Mobilny Okołodomowy Pojazd Samoróbka.👍👏 pozdrawiam

[@MadeinPolandChannel]

Super nazwa 😁

[@martinfoster5163]

Very nice work. Perfect for flat ground. Unfortunately, I live on a mountain side (in Mongolia) and I'm trying to figure out how to move snow on uneven ground and a side slope. So far, I've only been able to use shovels which is really hard work. The snow pack has been quite deep this year (about 50cm). I could make something better, use standard shovels or just wait 2 weeks and most of it will be gone from solar melting.

[@BernRex]

thats cool, youve got time to grab a coffee while the blade changes direction.

[@mr.ranyhomemade2466]

Very nicely your diy

[@mr.ranyhomemade2466]

Thank you You are my best fan a long time ago because I'm sure all your sit made can work is not only for so😊😊😊

[@ARTUROmechanika]

Great tool! Good job.

[@francof59]

bravo i miei complimenti ,un ottimo lavoro,peccato che dove abito io non nevica piu!ciao!

[@MrYosek]

Jak ja żałuje że nie mam takiego sąsiada😉

[@vichetdragoncars3186]

Great idea

[@Farm_fab]

If you get desperate for more Zn, it's used in water heaters as a means of protecting the inside of the tank from deposits of minerals.

[@HarryPotter-ux3ir]

Если бы такого качества отвалы были бы в магазинах, то было бы понятно почему так дорого стоят... Сколько возни, сколько нужно инструментов... А так хорошая работа!) Зимний вариант домашнего польского Прайма))) (Это который из трансформеров Оптимус Прайм)

[@Stonednb]

Игрушка для взрослых мальчиков ;) Удачи, так держать!

[@carlhelmick7711]

That's pretty cool. I must say I'm the type of person who is a little lazy. I would have to have something I could ride. No disrespect now that's just me. 😀👍

[@ИгорьГунин-й3м]

Столько сил .... И умения . А в конце эта смешная повозка .

[@nadjichoromo7217]

good job

[@fwflyer78]

Nice work!

[@aarond1592]

everything you make looks professional masterpieces

[@adelinopietropoli4978]

Wow congratulations, very good job my friend ,😊👏🔝👍

[@marianhruska3153]

Veľmi pekná robota.

[@vinceianni4026]

Good job mister well done

[@MichSC]

Jak zwykle w samo sedno ;)

[@madeingarage7040]

Panowie super robota!!

[@madeingarage7040]

@Made_in_Poland1..... Thank you😁 I already wrote a PM on messenger😉

[@roddjer9350]

So... next winter there will be an automatic loading function for the bucket... 🤔😎 Great job man, as so many times before. Really like this channel, keep up the good work.

[@Mark15634]

Champion.....Bravo

[@hafo821]

Great job sir!!

[@TheDistur]

Pretty cool.

[@johnthomas4577]

Well Done!

[@JAMILSON1147]

VERY GOOD

[@TANmotoblog]

КРАСАВЧИК!!!🖐😉👍🇷🇺 попробую сделать похожее!!!

[@promiscuous5761]

Thank you.

[@sddiymakeitworthit7512]

Super awesome 👏

[@e3672222]

this is COOL!

[@arturaspaulauskas1692]

Super! 😉👍

[@dominikn4954]

Szanuje za umiejętności♥️

[@dariuszwereszczynski8061]

Elegancko 👍🏻👍👍🏽

[@caddy_v3277]

We have a 6' light truck plow adapted to bolt on to the bucket of our tractor.

[@JanKowalski-op6rf]

Cześć Dariusz, wyszło wizualnie super :) jednak efekt, jak to działa - taki sobie. 1. Za słabo dociska do ziemi, nie zgarnia po kostce. Zostaje sporo śniegu pod pługiem. 2. Giba sie na tych spręzynach za bardzo. 3. Masz traktorek, mogłeś zrobić prezentację z nim. NIeraz nawet qudami po chodnikach odśnieżają.

[@MichSC]

Nie marudź

[@JanKowalski-op6rf]

@@MichSC To tylko moje zdanie. Trzymam kciuki za chłopaków z kanału by zdobywali jak najwięcej subskrypcji :)

[@BarlitosC]

And all of a sudden I need a new water heater ......