SNES Classic Edition Nincade Install - Completely Wireless Bluetooth No Dongles!

[@Madlittlepixel]

Suggest doing the firmware update prior to install of the Nincade, didnt mention that in video~ Thanks guys! Buy a Nincade: amzn.to/2DgGmZm Nincade Update: www.brookaccessory.com/download/NES/

[@SebasHCG]

damn shit, i wonder why i was enable to pair my SFC30PRO. thanks dude, working fine after the firmware update.

[@markracer3281]

Oh hell yeah... I will order a couple of these Nincades asap! You da' man Ron!!!!!!!!!!!!!!!

[@bryan2garcia]

I have the dongle of the 8Bitdo and have no problems so far so good

[@KitsuneJimmy]

I wonder if this could act as a start into potential Multi Tap support.

[@Superdimensional]

Cool mod and tutorial, but these are a bit pricey, $35 ea for the adapters, then you need the controllers... I picked up the my arcade wireless controller for the snes classic mini at Target, they’re $19.99 and work very well! Check them out. But again, this is a cool mod! Thanks for doing what you do!

[@RetroBerner]

Thanks for blowing out my eardrums LOL

[@maximilianschmidt9944]

Does this work with the analog sticks and R2 + L2 buttons? I know the 8bitdo receivers require a certain firmware to make those buttons work.

[@enriquepizzati1246]

Great Video brother... Will this work with an 8bitdo arcade stick? Thanks

[@toasterboy708]

Hey MLP, do you know if the Nincade fits Ok in the Euro/AU SNES? Its a slightly different size casing, so hopefully it fits the same???

[@bongloaded]

Love the channel bro..

[@uncannyx]

mount the board on the heat sync? hm...

[@murenorocha]

I've tried that with two 8bitdo 2.4ghz receivers and noticed the heatsink, which is just below them, gets a bit hotter than I expected. Then I undone that, since something tells me it would damage them in the long run. The heatsink is that big for a reason.

[@edsonlara4329]

I have the same gamepad 8bitdo, and i can't do it. I hear the sound but is not working.

[@davidtaylor497]

Hey Bud. Thanks for the video I didn’t know this chip existed. I have an important question if ya got the time to answer. I have a pro controller as well. I have the SF30 Pro. While using the 8bitdo wireless receiver with my pro there is slight lag. They are both fully updated and I am using game mode which helps but in platformers it’s really noticeable. My question is this. Does this Nincade chip provide better response time than the 8bitdo receiver? If so I want this chip right away because the no dongle setup is def a plus. Thanks in advance.

[@Madlittlepixel]

David Taylor I personally feel like the input lag is better with the Nincade. There is a firmware update on the brooks website that may need to be done on the nincade depending on if its a newer or older shipment. But ive not gona back to using the retro receivers after installing 2 of these. Works great and you can still use original controllers in the ports if ya want. Looks cleaner too without dongles hanging out lol.

[@davidtaylor497]

Madlittlepixel thanks so much for the quick response buddy! 1 more question! Let’s say I install this chip. When I have my pro connected wirelessly to port 1, is port 2 still fully functional with an official wired controller or the SF30 2.4ghz? Cuz I got one of those too.

[@mitsuk1406]

i believe ur SF30 Pro when using 8bitdo wireless receiver is in android mode. but with nincade, SF30 Pro is set to switch mode....response time might better than the 8bitdo receiver

[@CAPTAPHOENIXF90]

Can it work on NES and SNES Minies on Nintendo Wireless NES-Cons, Wireless SNES-Cons, Joy Cons, Pro Elite, Xbox One Ver.3 and Elite Ver.2, PS4 Ver. 1 and 2, Razer Junglecats, etc.?

[@Mephysto95]

Thanks for the tutorial

[@rodsten3332]

do you have updated last info,for board,case,power supply,wired controller on amazon ?not too sure what to buy

[@kylenelson1805]

Do these work with 8bitdo’s diy boards? Like, could you use two diy converters and this nincade to convert a snes mini and its controllers to a wireless setup.

[@honeypower]

Heard the d pads are real bad on all 8bitdo pads...how do they compare to the retropie??

[@TheMasonGamer]

You can just use the wireless kit for SNES Classic controllers. That way the D-pad doesn't change

[@4fire1]

I did this exactly as in the video with my snes mini and it did not work xd Am stumped as to what could be the issue here. It's supposed to be a straightforward enough process. Help :/

[@peter0071000]

Hey how'd you go...

[@4fire1]

@@peter0071000 it worked after redoing it again

[@michelwf1989]

11:04 How did you install this "Switch to NES Classic" in your SNES Classic? I wanted to do mine, too.

[@A4orce84]

Michel Wagner Ferreira - Did you figure this out? I’m interested in it as well

[@AguFungus]

Look up Hakchi CE.

[@hidrosoft]

does the 8bitdo analogs work with starfox?

[@konstantinrus6260]

Hi! how connect 8bitdo sn30 pro and Snes Mini + nincade. PS4 Joy good connect, but 8bitdo don't connect(( How activated? Fanks

[@TheMasonGamer]

Does it work with 2 controllers? Like if you have 2 installed to the system

[@Madlittlepixel]

TheMasonGamer And ParkerPro yep. I put 2 in mine, works great.

[@TheMasonGamer]

In this video it seems there's only one area for connecting this. How do I install 2?

[@Madlittlepixel]

TheMasonGamer And ParkerPro if you look on the right side of the board thats the connection for the second one. Each controller port has a plug on the board. Player 2 is middle right long side of board instead of front middle like the firat player.

[@TheMasonGamer]

Thanks. One last thing, how do I connect which controller to which?

[@stuprefutata]

The metal plate is the cooler for the snes mini processor....is it not?

[@glovedcop69]

That's what I thought? Is it such a good idea to put it there?

[@telemaster]

Any guesses if the board will fit inside the Super Fami/PAL SNES mini?

[@TheMasonGamer]

I have two inside mine and they both fit

[@Overflow066]

You know you can use their retro adapters to connect to their own controllers and a bunch of others? They make a bunch including for (S)nes Classic.

[@patrolzero1]

Hey, do you have random down presses at the save state screen? I notice when I leave my controller down it randomly locks and unlocks save states.

[@Madlittlepixel]

I didnt have problems for a long while. Then all of a sudden I do get weird ghost presses etc. Ive since removed these and went with the 8bitdo wireless controllers.

[@patrolzero1]

@@Madlittlepixel I didn't try the update, the website is hard to decipher, would you ever do a video on that?

[@NoNo-sv2fo]

So I did the nincade update and got it installed in the snes classic but I cannot get the controller to sync. I am using the 8Bitdo FC30 Pro and even tried Start and A and Start and Y and it just flashes. Help!!!!

[@TheMasonGamer]

Try a different combo. Start + X worked for me. If it's blinking 4 times in a row, it's on Switch mode, which seems to work.

[@grimmah1978]

Hello, i just installed nincade in my Snes classic as well, but im running the older SF30 controller, not the pro. Have you tried syncing that controller (if you own it) to the nincade and succeed? Ive tried all the combinations i can find in the manual, but either it doesnt work, or im doing something wrong. I have updated the firmware of both the nincade and the controller respectively to the latest firmware available. Perhaps you have some ideas?

[@grimmah1978]

Oh never mind, i misread the bit about holding select for a time. It now works great. Thanks for a good channel by the way, been lurking your videos for a while and just subbed.

[@vkhelldog]

I feel like they should have came with those too begin with lol

[@countrycledus8933]

Virgil Kellogg , you tell em! 😂

[@JarodMoonchild1975]

Or that the NES and SNES classic's came with bluetooth built in from the get go, and original official Nintendo wireless bluetooth controllers. Imagine how good wireless bluetooth controllers made by Nintendo themself would be..... 👍😉

[@maxthemink4790]

So if we connect 2 wireless, and then connect the wired ones. Is it four player?

[@Madlittlepixel]

Negative. You only have access to 2 players. If the controllers are connected wired those act like p1 and p2, same as the bluetooth controllers, just player 1 and player 2.

[@inquisitorchristopher8527]

Doesn't the 8bitdo pro controller work with their little dongle that goes in the plug outlet?

[@yorkshirepud6676]

Very Good!

[@aremdvnasophia]

That's awesome. These work with PS3 Controllers?

[@Madlittlepixel]

arem dvna yep

[@mikyb75]

Good stuff.

[@upyoursenator]

Will this mod work with the SNES Commander?

[@Madlittlepixel]

UR NEMesIS no, only bluetooth controls.

[@linkssz1699]

You can get the 8bitdo retro receiver for like £13 and does the same thing except its a dongle you plug in, surely that could be modded to go inside the system.

[@Lang7]

Link SSZ It can but you have to remove one of the ports from the front. Because the dongles are designed to connect through the controller ports, to put everything inside you have to move the controller connector inside the system too. This board eliminates that problem and leaves you with two functional controller ports on the front.

[@wdy8425]

I put one of these in my famicom mini a couple months ago results have been hit n miss sometimes you'll press a button once and it will register that the pressing it over and over and the range insist the best at least not with a ps4 controller on a famicom mini

[@Madlittlepixel]

Havent heard of any concerns. Hopefully mine dont have this issue. I updated the firmware on the Nincades to the most recent and am only using 8bitdo controllers with latest firmware and havent had any issues.

[@wdy8425]

Madlittlepixel could be the ps4 controller I don't have as many issues with a wii remote for some reason

[@TheThinker82]

Hi there, I have a problem with Snes and Nincade for player 2 when using a ps4 gamepad It does not map the buttons for player 2. Only up,down,left,right works How can I fix this? How can I remap the keys? I have another nincade for player 1 and it works flawlessly. Many thanks

[@nomo4u886]

Dope

[@Abubububu]

The code reminds me of something... konami code maybe 😜

[@Heliocentric]

holy F'n shit, thats awesome

[@oscartorrez2365]

In ur video u didnt specify what port to put the wired controller while syncing sn30 pro

[@peter0071000]

In the first one prob

[@Oldskool4Life]

35 x2 + 8bitdo x2 + snes mini is way to expensive. Buy a shield TV for that money en run an emulator.

[@SebasHCG]

L2/R2 L3/R3 Star buton, are unbindabe in Retro-Arch... !!! fuck nothing is working how it suppose to be today... now we need to cry for a Nincade update ... awful.

[@troyamhaz4817]

CACK!! hahahahaha

[@erroneus00]

I'm sure they are great devices and all but they are FAR too expensive. I'll never buy one at that price. I'm not poor by most measures, but I do require some value. For me, the 8bitdo controllers themselves are the way to go. And if I were going to disassemble my unit to install something, I'd just as soon disassemble the 8bitdo dongle to install it. It's easy to imagine doing. I'd probably extend the pairing buttons as well as the LEDs (super easy to do) and end up with something FAR better and far easier to work with. The one advantage with this device is the continued ability to use the controller ports but no one is suggesting they can have up to four players this way, so it just represents auxiliary port access... NOT worth it in terms of value.

[@toasterboy708]

Stop your whinging. Not everything in the world is priced to make you happy. By the time you buy the dongles, the NinCade only costs a few bucks more to have it all hidden, tucked away, neat and tidy. Well worth the extra few quid.

[@erroneus00]

Nonesense. I get the 8bitdo dongles for around $12 that last time I bought some. I got two of them for less than a single one of these things which apparently limit the way you can use buttons. It's impractical, non-portable and two of them is as expensive as an SNES unit itself.

[@imamakeit5163]

erroneus Nonsense. ........ I got nothin. 😁

[@Superdimensional]

erroneus I agree, these should be $15-20 tops, $35 is ludicrous

[@Fonz128]

This is great!

[@Evilkingus]

How much of and idiot would you have to be to buy these devices. Gonna feel real good installing this at a price that is nearing that of snes mini - and you you need the controller too. Cool-ish concept, but please.