Twisted Wire Earrings DIY Tutorial | How to Make No Solder Stud Earrings

Hi guys, I've made a Twisted Wire Earrings DIY tutorial to match the earlier ring design. And, this video will show you how to make these pretty no solder stud earrings with just wire.
I hope you enjoy this :)
Alright, let’s get started!
****************************************************************************
Timestamps:
0:00 Making twisted wire
2:13 Forming the Earrings
5:40 Polishing & Buffing
7:29 Failed process to avoid
#wire #twistedwire #earrings #diy #tutorial #nosolder
Material I used:
20g round uncoated brass wire - cut into 120mm. Find similar here: amzn.to/3NBdYEX
Silicone Earrings Stopper¬- Find similar here: amzn.to/3wqKVOj
Silicone Earrings Back- Find similar here: amzn.to/3FXX5Bs
Brass Earrings Back- Find similar here: amzn.to/3wBNddT
(You could use copper, aluminum, or gold-filled wires if you like. You could also use artistic wire for practice purposes, I don't recommend it for wearing though.)
Tools:
Chain Nose Pliers- Find similar here: amzn.to/3MfTHo7
Flat Nose Pliers- Find similar here: amzn.to/3yU52X9
Flush cutter- Find similar here: amzn.to/3MoVG9E
Nylon Pliers- Find similar here: amzn.to/3G9fXhd
Metal Block- Find similar here: amzn.to/3lik8gJ
Chasing Hammer- Find similar here: amzn.to/39noHUD
Nylon Hammer- Find similar here: amzn.to/3PfLkuq
Ring Mandrel - Find similar here: amzn.to/3wpketx
Cotton Polishing wheel- Find similar here: amzn.to/3wc8WJ1
White Polishing Compound- Find similar here: amzn.to/3NajbmG
Polishing cloth- Find similar here: amzn.to/3LhkwXE
Sandpapers- Find similar here: amzn.to/3sEaUiY
Foredom flex shaft- Find similar here: amzn.to/39qcdvh
File Set - Find similar here: amzn.to/3wsmnEK
This DIY project requires a bit of skill, so be patience. :)
****************************************************************************
Please like, subscribe, and turn on notifications if you like to see more jewelry-making videos from my channel. I'll be doing my best to upload a new video every week.
If there are jewelry pieces you would like me to show you how to make, let me know in the comment below.
Thanks for watching! Stay well and safe. :)
Special credit:
Music by Citrus Avenue - Espresso Sun - thmatc.co/?l=4...
Music by YSO Blank - Love Letter - thmatc.co/?l=4...
Music by YSO Blank - A Brighter Summer Day - thmatc.co/?l=F...
Sign up thematic via this link if you like:
app.hellothema...
#howtomake #studearrings #wireearrings #nosolderearrings #wirestuds #wirejewelry #diyearrings #earringstutorial #diyjewelry
(Disclaimer: I do my best to find the most similar tools and materials from the site with reasonable pricing. If you purchase from the links I shared, I’ll be paid a small commission. Thank you :))

[@MaggieCSAtelier]

Hi guys! Here are the matching earrings to the earlier twisted wire ring. :) This project requires some level of skill and patience. The make it or break it factor pretty much rely on how well the twisted circle is joined. The success rate could be 50/50. I’ve included some failed attempts in the tutorial, be sure to watch it, so you don’t have to go through them and save some time. If you ever try making this, let me know. 😊

[@hallieshouse13]

So valuable ti the learning process, allowing us to see your earlier tries. I like to see them as Stepping stones, not failures 😊

[@MaggieCSAtelier]

Well said, I’m so glad you find it helpful ☺️

[@szbr6465]

I don't know why there are less views on this video as well as this channel although this channel deserves views in Million!!! you are going good and I loved your videos especially that studs making one. you have that talent to create charms on your own.... keep going!!👍👍👍

[@MaggieCSAtelier]

Thank you for your kind comment! It definitely helps this video to be ranked higher. I’m so glad you like those studs, it’s one of my favourite too . ☺️✨✨

[@heatherbressette6275]

❤ luv these! Great work Thank you for sharing ❤

[@MaggieCSAtelier]

Thanks Heather. Glad you like them! ☺️🧡

[@barbaratumlinson7445]

I have been looking for an earring to wear that wouldn’t be to heavy. Thank you, these are lovely.

[@MaggieCSAtelier]

I’m so glad these earrings work for you Barbara. :) Check out my other minimalist earrings tutorials too if you like.

[@benancialopez6894]

Very pretty and simple. Thank you for sharing God bless you

[@MaggieCSAtelier]

And thank you Benancia, God bless. :)

[@martioneal3482]

I so love these earrings. I love the way you made them. Awesome. Thank you so much.

[@MaggieCSAtelier]

I’m so glad you love this Marti …! And thank you too :)

[@portraitofalady_]

I’m absolutely enthralled. 😍

[@MaggieCSAtelier]

I’m so glad you enjoyed this vid. ☺️

[@MelanieMacDonalDMELSPLAYLISTS]

💛 *THANK YOU* 💛 NOW TBH I HAVE SEEN THIS VIDEO POP UP SO MANY TIMES AS I HAVE BEEN SCROLLING ( FOR ABOUT 1YR ) RING & EARRINGS & IN ALL HONESTY I DIDN'T CLICK JUST DUE TO THE FACT THAT I LOVE CHUNKY JEWELLERY ... HOWEVER MY MUM LIKES DAINTY JEWELLERY SO TONIGHT I GAVE THEM BOTH A WATCH & TO MY SURPRISE I WAS WRONG & THEY ARE FAR THICKER , LARGER & TACTILE THAN I FIRST THOUGHT LOOKING @ THE THUMBNAIL 💛 I HAD AN IDEA LIKE THIS & HAVE BEEN TWISTING > HAMMERING > RINGS ALL WEEK , BUT FOUND THE LASSO PART STOOD OUT TOO FAR SO CUTTING ONE SIDE OFF MAY JUST DO THE TRICK & I REALLY APPRECIATE YOU ADDING ALL YOUR ATTEMPTS & I THINK FROM WATCHING I MAY BE ABLE TO SALVAGE A COUPLE OF THINGS 🙌 *THANKS AGAIN* 💯💛

[@MaggieCSAtelier]

So welcome 🤗 I’m so glad you decided to check out these videos. You can also check out my latest earrings which is dainty and easier to make, and I think your mum would love that too. :)

[@mazadan]

It is so nice you show the failures as well. I am thinking this method to make a ring and use the wire ends as a claw setting for a stone

[@MaggieCSAtelier]

Great idea! I indeed done that and will make a tutorial in the future. But I’m not satisfied with some of the details yet and might need some new tools for that too.

[@kmgothi5]

Thank you for sharing. Especially, what not to do.

[@MaggieCSAtelier]

You’re so welcome. :)

[@debscott9809]

Stunning.

[@MaggieCSAtelier]

Thanks Deb :)

[@yvettecintron3988]

Beautiful work

[@MaggieCSAtelier]

Thank you very much!

[@judithalezones352]

Que Dios te bendiga tu talento 🙏, ese trabajó te quedó demasiado bello y muy sobrio y elegante Felicidades Maggie te deseo el mayor de los éxitos Gracias por compartir tu bello arte

[@MaggieCSAtelier]

¡Hola Judith! Estoy tan feliz de leer tu comentario :) Muchas gracias por tu cumplido y que Dios te bendiga también ✨ (Espero que Google lo traduzca bien al español;))

[@danabrown6341]

Perfection!

[@MaggieCSAtelier]

Thank you Dana!

[@e.elainefullard2765]

This is so amazing!!

[@MaggieCSAtelier]

Thank you Elaine ! :)

[@yvettecintron3988]

Very pretty

[@MaggieCSAtelier]

Thank you :)

[@magdalenab8617]

Such nice earrings! I will try to recreate them once my Wire comes in. What would you recommend to use instead of the Metalblock? Unfortunately I don't have one yet. Also, a fun video Idea: jewellery making with minimal Equipment/household items or a challenge :)

[@MaggieCSAtelier]

Thank you Magdelena! I’m glad that you’re making these soon. It requires something harder than the metal wires like an anvil or metal block in order for the flattening to work. So that’s quite unlikely to find a substitution from house hold item. All wooden, plastic, acrylic materials wouldn’t be able to create that effect and they are most likely be dented instead. If you happen to have a big metal hammer which has a flat metal side surface, that’d work. But the surface would be rather small and hard to work with. And you’d need 2 hammers instead of one. Hope this make sense.

[@magdalenab8617]

@@MaggieCSAtelier thank you for clarifying! All makes sense! Will see what I can find. Excited to create. Your tutorials are fantastic.

[@Ilovejewelry06]

Hi!!! THANK you for your wisdom in jewelry making!! I’m excited to start. Do you have an online store where you sell the items you make? How do you make your money??

[@MaggieCSAtelier]

So glad you’re gonna make this. I used to have an online shop but I’ve slowed down for health reasons. :)

[@Ilovejewelry06]

I totally understand about the health reasons. I wish you better and better health each and every day. Thank you for your teachings online!

[@faridavinci2523]

Hey! Do you know how the wire should be handled if I wanted to use metallic earring nuts? I can find any info about it anywhere 😭 Also thank you for this amazing video!❤

[@MaggieCSAtelier]

Hi you’ll need to create a dent on the earring post to use a metal nuts. You should search for video on how to make earring posts, lots of video teaching that. Here’s one from other KZbinr: kzbin.info/www/bejne/f2SpmKWGdt-rapIsi=x8tI5v0ddKAI1Bck

[@Dean-rh9jz]

Are you annealing the wire often as you work harden it?

[@MaggieCSAtelier]

It depends, but for all the videos I’ve uploaded here doesn’t require annealing. Just using half hard wires would do.

[@qikogleams]

Great work! Thanks for sharing.😍 May I know what type of wire you are using in this project?

[@MaggieCSAtelier]

Thank you! I’m use uncoated brass wire, I always have all materials and tools listed in description below the video, check it out if you like. :)

[@poppyblue1512]

I really want to make this, but it kills me that apparently the wire needs to be twisted by hand and I just can't do it no matter how much I try, so I just use a drilling machine with which it takes me seconds and no struggle at all but it doesn't leave any untwisted ends. I'm going to try to figure a way to do it with the drilling machine, I hope I can find some way.

[@MaggieCSAtelier]

Hi I have a video making twisted wire with the help of clamp on bench. It frees up your other hand to help you to twist the wire and still leave an untwisted end. Check it out here: kzbin.info/www/bejne/r2Gbqotoj7p9gtEsi=aRGm9ZE1Z-cF_CCU Hope this video would help. :)

[@user-jt1hv2ih1w]

🌹🌹

[@MaggieCSAtelier]

🙂🧡

[@MelanieMacDonalDMELSPLAYLISTS]

COULD YOU TELL ME HOW TO AVOID THE SHARP BURS I AM GETTING ON MY RING BANDS , USED COPPER ( NOT SURE IF IT'S ANNEALED ) I TWIST TIGHT BY HAND THEN HAMMER WITH MY DOMED CHASING HAMMER , BUT THE BARE COPPER 1.25MM ISN'T LOOKING HOW I WANT ( THE CURB CHAIN LOOK I LOVE ) & LOOKS A BIT LIKE HAMMERED PLATED WIRE WHERE IT BREAKS THE PLAYING , BUT IT'S DEFINITELY BARE COPPER SO I AM GOING TO TRY MY ANNEALED COPPER TO SEE HOW THAT GOES & I HAVE ANNEALED BRASS TO MAKE THIS SET 💭🍀💛

[@MelanieMacDonalDMELSPLAYLISTS]

*BREAKS THE PLAYING : NO EDIT FEATURE ON THIS TABLET 😐

[@MelanieMacDonalDMELSPLAYLISTS]

*PLATING 😬🙈 DAM AUTOCORRECT 3 TIMES IN A ROW 😂

[@MaggieCSAtelier]

Lol….. I was having hard time understanding til I read every comments. If you meant the sharp bur after cutting the wire off, then first of all make sure it’s cut by a flush cutter and cut it as short as possible. After that use sand papers or any polishing method to smoothen out all the roughness. If the wires got hardened and hard to work with then it would be easier for you to use dead soft wires (or annealed wires) And if you are using plating or coated wires then you’ll need to skip as much polishing as possible. And you’ll also can tape your pliers with masking tape before using them on the wires to prevent ripping off the coating too much. But this would leave some residue on wires and require some clean up. Hope this helps and happy making. :)

[@A_Duar]

🥰

[@judithalezones352]

Hola Maggie, me puedes decir que material es ese? Que resiste ese texturizado ?

[@MaggieCSAtelier]

Hola Judith, estoy usando alambre de latón sin recubrimiento de 20 g. Siempre enumero todas las herramientas y materiales en la descripción debajo del video. Puede consultar todos los detalles allí :) Realmente no puedo entender la segunda pregunta, ¿puede elaborarla más?

[@pamelarivera5916]

What hardness is the 20g wire

[@MaggieCSAtelier]

Both dead soft and half hard would work

[@hallieshouse13]

Is this soft or half-hard? Ty!

[@MaggieCSAtelier]

It’s half hard :)

[@andreiacristina3424]

Aonde compra esses materiais pra fazer brincos ❤

[@MaggieCSAtelier]

Hi you can check out the links from below the video if you like to get some for yourself. :)

[@najathanha]

What wire are you using?

[@MaggieCSAtelier]

Hello all tools and materials are stated in description down below, check it out if you like. :)

[@esraaadel1187]

🌷🌷🌷👌

[@MaggieCSAtelier]

☺️🧡🧡

[@stephaniemcintosh2324]

I am living Jamaica, how I can source material .

[@MaggieCSAtelier]

It’s best to check with your local suppliers, or research online to see if any suppliers ship to where you’re locating.

[@payaldalal1278]

What kind of wire do u use?

[@MaggieCSAtelier]

Hi I’m using brass wire. All materials details are stated in descriptions below the video, check it out if you like. :)