Magnavox MDR865H/F7 DVD/HDD with a possible bad Hard Drive/Bad Caps in the DVD Recorder Part 1 of ??

Taking a look at a Magnavox MDR865 Hard Disc Drive / DVD Recorder that wont play from the Hard Disc. I plan on trying another 250GB Drive I have recently formatted, that will be part 2

[@radiologe9271]

most there is a special Firmware on the HDD´s for Recorders, not only a special File Format

[@marthawalker9173]

To actually see the hard drive you have to go back to home and select hard drive there under "title". I just went thru everything you just did but pressed rec with video connected, stopped after a few seconds, selected home and title and the hdd and ok to select what I recorded. All is fine. Drive is formatted.

[@renatoscutube]

There is a software called Diskgenious that is very good and free. It would be able to show you if the computer detects the drive or not, even if it is defective and the type of formatting it has now. It may be formatted for linux, for example, and your Windows computer may not be able to recognize it natively (but that software can).

[@GerardPinzone]

For 100uF and less, would it be easier to replace SMT electrolytic capacitors with ceramic capacitors?

[@exiledconnections]

Ive got a sharp vc-a503 the slip clutch wont engage the drive gears any suggestions?

[@reddragon27284]

Windows will almost certainly not show the drive in explorer even if it’s working because it’s likely formatted with something like EXT3 (Linux). You’d need to look in disk management (right click start). The new drive probably needs to be blank for the recorder to recognise it as a usable drive. You can wipe the drive in windows using diskpart. Google how to use the diskpart clean command but BE CAREFUL because if you fluff it up you can erase your system drive by accident.

[@bobbyk6585]

I have never had any success employing the freeze technique on suspect hard drives.

[@_decky4ever_]

You can copy the whole disk to an another HDD with DDRESCUE

[@stevedebeukelaer1424]

Hi probably is just hdd remove the board and look in to tvs diodes of the drive. To format drive try secrete menu skip 079 there you can format the hdd

[@norcal715]

skip 079 has no effect on this unit. I must have tried 100 times

[@stevedebeukelaer1424]

@@norcal715 piety and flash the firmware ? Did you try that?

[@stevedebeukelaer1424]

@@norcal715 hi try next skip 079 that will be working i did what research. Let me know please

[@leonjohnsonjr3331]

I bought this same unit form the thiftstore for$8

[@leonjohnsonjr3331]

Thats not the harddrive that goes in there it should be 3.5 harddrive

[@norcal715]

It clearly states one the interconnect board 2.5 inch, so..... no, the drive is the original factory size

[@leonjohnsonjr3331]

@@norcal715 o ok that's great

[@funhaveatutti]

Try formatting the Hard drive in Fat32

[@norcal715]

Only NTFS or exFat was an option. Part 2 is in the works now with a different 250Gb drive

[@stingerassil5989]

لماذ لاتفرغ المكثفات قبل فحصها .وقبل سنوات نزلت صين جهاز فحص مكثفات صغير وفعال وممتاز افضل وارخص مما عندك .وتحية للك من الاردن

[@norcal715]

سيتم تفريغ (إفراغ) معظمها بواسطة الدوائر التي تقوم بتحميلها. الشيء الوحيد الذي يهمني هو مكثفات الجهد العالي الجانبية الأساسية.

[@stingerassil5989]

@@norcal715 احسنت اخي