Magnetic Motor (Flux 1.99)

[@Hizone1]

At least he showed the true results rather faking it by rotating with a motor.

[@tribulationcoming]

I am a wood worker and an experimenter. This is very good work. Thanks for posting what represents many hours[a bunch] of the process.

[@juliodelgado705]

Hello.. I have reed your comments. Would you be able in replicating the wood work? And I’ll buy it from you.

[@angargoy7181]

You can put all the magnets you want in the positions you want, this will never create energy is pure physical

[@traininggrounds9450]

Repulsion Attraction Equal and opposite forces No energy change in the system.

[@DL-kc8fc]

​@@traininggrounds9450 It would have to induce an imbalance on the first and last magnet in the circle, which closes the magnetic field of the whole platform. It would like hidden electromagnetic coils powered by a battery with a mechanical breaker. The torque would be very small, but the "engine" would rotate until the battery is discharged. ))

[@MrLikeAsatellite]

Did you ever notice that this kind of thing is not a motor but a brake? The disk, once set in motion manually, would spin a pretty long time without the magnet stuff.

[@michaelbuckers]

Permanent magnets can actually be used as brakes! If you drive a magnet over conductor (guide rail or disk brake) it will generate eddy currents in the conductor which will work against magnet's motion. It's basically like a generator short circuited to itself - all the power that it generates goes against shaft rotation.

[@JohnSmith-lb3ge]

It's basically a magnetic couple

[@meslpy]

Look up thelma truck brakes

[@ricardomontalban6004]

Don’t look up Louise truck brakes

[@thenitpicker911]

It is used as brakes. There are spinning bikes using magnets to generate resistance

[@smokyatgroups]

Thank you for sharing those many hours of painstaking work and measurements ..... a beautiful scientific approach!

[@iriakastanley5467]

Have you tried this, a circle 50cm, 60cm all on one point then divide into 12 (or 36)equal halves. 50cm is the wheel diameter while 60cm is the magnet diameter when placed, Draw a tangential line on the 60 cm in all the 12 lines. Let's say magnetic repulsive force distance is 10cm, then measure 10cm on all the tangential lines, placed the magnet on the 12 tangential lines at point 10cm. 11 to repel and 1 to attract. Note: it might not work.

[@baddinosaur1548]

Love the music, One day we will crack this problem and get it to work.

[@turbocpt1]

This is the first person I have seen spending all their monthly income on magnets..

[@osnelli]

LOL!!

[@johneymute]

Yeah and all for just a magnet motor that turned to be nothing more then a magnet motor soap👎

[@josidasilva5515]

The Theory of Everything (from an Electrical Engineer's perspective) The Universe is fractal. Ether/space/anti-matter/vacuum is composed of atoms with electrons spinning around at multiple times the speed of light, therefore currently undetectable to humans, except in the electromagnetic spectrum. Proof: 1- Quantum entanglement. 2- Gravity as an electromagnetic phenomena. 3- Super colliders additional particles output (yes, we can destroy anti-matter). 4- Transmission and detection of magnetic fields. 5- Synchronicity, intuition, empathy, remote-viewing and other brain related phenomena can relate to electromagnetic transmission. 6- MRI, CT scans, radar detection utilize ether as means of transmission. 7- The bending of light around celestial bodies. ∞ - Anything else we call magic or coincidence when the equations of probability cannot predict.

[@jeanbonneau3425]

Your work and your analysis are excellent. 🇨🇵

[@daveremian6324]

I think your headed in the right direction you just need to add electricity to it keep working on it.

[@johneymute]

No, the goal is make a magnet motor that ahould start & spin on it’s own, we only have to overcome that cogging problem.

[@brettmoore3194]

Or, a linear wound around the circumference with 2inch copper pipe with ferrofluid as the prime mass mover. So ,looks like a donut with magnetonfluid in it ,wound with 360 bifiliar transformer sections. A 360 phase rectifier

[@aetheonpro396]

For those hating on this guy, good on you... But He is doing what you people can't do... And That is how new things are found... There is nothing wrong in testing possibilities, the only downside is it not working.... But if it does, He would have made history... You aren't doing it, so someone has to do it....

[@garysedletsky9548]

Keep experimenting and don't listen to these comments about energy concervation. The energy is stored inside magnet, it was put there during magnetization process. Before I came across a few patents on magnetic motors, one is Howard Jonson I believe. The trick was in extra magnets once every 4 magnets or so. I recommend you to search and study these patents and wish you success!

[@logitech4873]

There's no energy stored in a magnet.

[@garysedletsky9548]

@@logitech4873 you might be right, but in order to magnetize material a magnetic field is applied, which takes energy; over time magnetic domains are getting disordered which is loss of magnetic power (?) Energy or not, magnet stores some magnetic properties that were put there using energy

[@Sadamitsu]

Why do you set them for attracting? The first construction would rather work if you set magnets for repelling (red to red or blue to blue)

[@manwar999]

your videos are so good and a time recording on your way to greatness...im exploring the same way into the unknown...at least i no longer feel alone in my quest after watching you...thank you

[@TheProboys3]

stop exploring free energy your wasting your time

[@thilovonstillfried6278]

So viel Zeitaufwand und Materialverschwendung für physikalischen Unsinn.

[@АлексейСтаховський]

The magnet fields are symmetrical and thus the power to move through the field is equivalent with the moving magnetic power.

[@timothyaaron8603]

What a beautiful model of friction, notice how at high speeds it moves easily and at slow speeds it catches . just like pushing a couch, once is going don't stop until you are on the other side of the room.

[@THOMASTHESAILOR]

Don't quit.! Winners never quit, quiters never win. You need a changing magnetic field. Of course, there's many ways to do that. Having choices/options is the whole key to every design. The right decisions are the key to everything..

[@RyanQuintanapolymath]

I did this same experiment with 3d printed rotor and stator . Doesn't work because the magnets make a field and not a pushing force. My neodymium collection costed a whole lot so I could imagine yours would be a pretty penny

[@uldisr]

Fantastic demonstration, against those Perpetuum-Mobile fanatics !

[@Ponk_80]

Try using a metal that is none magnetic instead of wood, to block out/narrow the magnetic fields, so it blocks out the attractive force.

[@firstmkb]

It's a nice build. If it doesn't work for your intended function, it would make a very cool roulette wheel, especially behind a ferrocell.

[@alexandergraf8855]

The Wonder of Energy can only bei Found in Medicine/Nanotechnology. For example: "About every 20 minutes an antiproton escapes through my stomach and explodes with the power of a thermonuclear bomb inside my shirt, but the explosion itself is so small, that it doesn't burn me and my clothes " this leaded to the low energy nuclear reactor. There is a way to trigger hydrogen to attempt to tunnel through zinc and at the same inhibit it (to avoid loosing it). The hydrogen then creates "a copy of itself" in the shape of anti-hydrogen, which explodes and delivers energy. The machine consists of a 3d-printed hollow zinc-shaft, a widened laserbeam, an electric impulse current, an electromagnet and finally rotation of the shaft. Bring everything in sync with pll-tuners and an orange-rosa flame will appear providing endless heat at no further cost. Built first in the 70s in antarctica by US, now on duty since 20 years on Georges famous airship carrier. The hardest part was to print the shaft. It took almost 20 years. The idea came from the pharma

[@tallbillbassman]

If you're hoping for some kind of "free energy", forget it. The laws of physics can be relied upon.

[@victoryfirst2878]

How did you make the vegetable oil iron filings rectangular plastic boxes ???? Really like your work. Good luck with moving forward. Peace too.

[@Tosnowood]

Очевидно что наклон магнитов никак не влияет на форму магнитного поля. Нерабочая конструкция, пустая трата времени. Хотя, видео красивое.

[@forexextrasensory1358]

Наклон как раз таки влияет. Но человек все слишком примитивно делает. Не по закону в общем. Одни нужно наклонить те что снаружи а вот ротор внутри нужно выстроить ровно 90 градусов но чтобы сам магнит был именно до центра вала и касался её. 😊 будь у меня такие магниты за пять минут бы сделал но увы они очень подорожали нынче. На правильную рабочую схему нужно 4 длинных магнита и 38 × 3 квадратных. Магниты пытаются встать ровно когда притягиваются и на основе этого будет вращение.

[@Archangel_Iahhel]

You can't cross positives and negatives or they will attract. The polarity has to be the same for all the magnets to repel each other. The magnets should be at a twenty degree angle and all polarized the same way.

[@mykedoes4099]

I think the problem with magnetic motors are the fact that you cannot take advantage of the full face of the magnet and only the bloch wall is captured threw the little gap in the field by creating the angle this is done.. B ut with pulse motor or dc motor you can take advantage of a full frontal view of the the iron core and the magnet itself for maximum repulsion or attraction which ever your after.

[@jameselliott9397]

I think I can get you past that point with one big magnet and 2 coils. Big magnet would be on same shaft away from you unit. The large magnet would pass over the larger air core coil and have diode or rectifier between it and the neutralization coil at your gate. Now you have voltage without outside power source.

[@RobertHarrisMIB]

I really hope you get this to work someday. You put in a lot of monumental effort! Good luck buddy

[@johneymute]

Were theres a will, theres a way.

[@IvanBlaBlaBla]

Static field wouldn't make a job. Keep in mind the second law of thermodynamic.

[@scicommerce]

Hard to see how comments can be super cleaver from arm chair. Thanks for the video, learned a lot from it :)

[@suprememasteroftheuniverse]

What did you learn? Idiot.

[@aksharma737]

That u don't... U r just a dog stairing the moon and astonishing, only... "What is this" don't want understand above it & let not others... Hey... Compliment at least for his creativity to support him. And never say anybody like that... Bczzzzz In science EVERYTHING IS POSSIBLE man... Read about scientists who reached to para science at the max of their scientific approach... Albert Einstein, Galileo, Da Vinci, Nicolus Tesla etc. Ok bro

[@abdullaherkara5196]

thank you for this video. now i see what the difference between written paper and real practice is. greetings from turkey

[@aronlodossantos9389]

Well, I recommend you ferromagnetic material between each iman to shield the magnetic field. Remember, an important concept in physics is to reach the equilibrium of the system, so, naturally, those magnets will 'find' the best position to save energy.

[@AhmetTasdemirDJLuds]

You can only exterminate a resistance in a maximum. It can work with only changeable pole help.Because the magnets locking when they come between every time.Because magnets chooses easy ways like an electric.

[@looksintolasers]

I admire the willingness to experiment. However, science is also about understanding basic principles of physics like conservation of energy. Magnets are cool but they won't break physics for you.

[@IvCastilla]

Magnetic repulsion motors do NOT break any physical law NOR 2nd thermo law.

[@looksintolasers]

@IvCastilla I think you're mistaken. The 2nd law of thermodynamics says the entropy of a closed system must decrease or at best remain constant. Try this thought experiment: The motor works and we hook it up to a pump, pumping air into a closed cylinder. Entropy decreases for the cylinder because compressing a gas like that goes against the pressure gradient. But if the motor works as advertised, the magnets are not physically changing so their entropy is staying the same. Adding the results together, we have a net *decrease* in entropy. This is impossible by the 2nd law, so the motor is absurd.

[@Thomeeno]

But we can't consider this as closed system. Magnets are physically changing. By influencing of the magnets in between each other they are slowly loosing its magnetic field which you are able to transform to the movement energy. Actually you are giving magnetic energy into system. That's like if we could be able to effectivelly collapse magnetic field of the permanent magnets , than we could directly transform this energy to another form according to first law of thermodynamics.

[@looksintolasers]

@Thomeeno I agree with this. If you're changing the magnets as the motor runs, you're not violating the laws of thermodynamics. But then what's the energy density of the magnets, and would there be any advantage vs. an electric motor running off batteries?

[@Thomeeno]

There are patterns to counting amount of energy stored in magnets, Amount of energy in standart magnets which you could have at home is counted in Joules or maximally tens Joules, but loosing magnetic field in magnets is really slow. This can¨t be comparable... Magnet motors are using nature energy (magnetic field), to make motion same as the wind plants using wind to make motion transferable via generators for electricity. While electric motors are just consuming electricity to make some work.

[@FilterYT]

Awesome fabrication skills! Thanks for sharing

[@DeepakKumar-nr7fy]

Free energy is possible I saw in my dream

[@nuralandalus]

you have to rotate the magnet just like a squirrel cage rotor, the magnet in the rotor has to touch two of the opposite

[@ptolamaustittan]

The problem is you need a switch and electricity , and wire that is superconducting and when running it runs cold never hot ,it cools itself down as it runs .

[@DirkIronside]

I like your determination and demonstration of your experiments. Hope you learned some good practical wood work skills along the way!

[@jr3474]

THE POSITIONS OF MAGNETS IN A LONG CYLINDER MUST BE MISALIGNED AND TWISTED IN EACH ROW. SO IN EACH LINE, THERE MUST NOT BE ANY ATTRACTION BETWEEN MAGNETS, ONLY REPULSION

[@briandoesstuff4831]

use this with copper coils to generate electricity for a motor that is connected to the magnets. then see what it does. (no external energy into the machine to be clear)

[@farida7777777]

Try and look at types of shielding that is mentioned in the Perendev docs. Once the shielding is installed, compare shielded parts with non shielded parts by using your ion filing perspex oil box. Results you will be looking for; is the backward magnetic force reduced, if yes, which material reduce it the most. Now, if there is any reduction in the drawback magnetic force, then success can be achieved, if not, then it might not be possible.

[@MikeGillett58]

I think everyone would agree playing with magnets is fun? I like to watch all these crazy ideas, why, because it is fun. Some people are engineering masters with fine machined parts, others are a bet more crude. This one taught me a very interesting idea of how to watch the lines of magnetic flux that I had never seen before. The use of the vegetable oil and iron filings. For me that was worth watching the video. Using Mu metal, copper or electronic switching will all have the same problem there is not any exchange of electrons, no energy is moving from one source to another other than the energy imputed. This does not change my fascination of watching all of these contraptions. Besides science does not really understand magnetic force any more then they under stand gravity. I don't need a lecture on Mass attraction etc. The point is how can you really explain gravity? Is gravity 100% equal in every pace on the surface of the earth? Why is it different, doses the mass of the earth change in one location to another? People can learn from persons that are patient and explain why something is not working, rather than telling them they are stupid for attempting to understand something. I would rather have a person explain not the physics general principle (that is easy enough to look up anywhere) explain why in this experiment the magnetic flux is canceling out the appearance of a potential attraction or repulsion from the other magnetic forces. If these forces were in a straight line (as in a magnetic rail gun) it might be easier to explain the energy consumed in the magnetic coils, that repels or attracts the projectile, then that object that has mass with energy (what type of energy) hurls itself through the air, hitting resistance, till the point that all that energy is transferred to the frictional forces or a solid object. Since energy cannot be destroyed where did all that energy go, transferred to all kinds of particles, to the solid object etc. Explain the physics in such a way that a person can understand it without resorting to citing a well known physics principle. If that is not your goal in watching these videos then why do you post rants>

[@soweliLuna]

when you make one that works, you should publish a paper and apply for a nobel prize, after all, you'd have broken the laws of thermodynamics, which would rip appart our whole understanding of physics. keep up the good work! or something

[@mordoc333]

So much free energy conspiracy in the comments, i love to read these! Thanks, youtube recommendations

[@FurryEskimo]

So the goal is to create a motor powered by magnets? I actually tried doing this for a HS science fair and was really adamant about it being possible. I failed, but wrote a detailed report about why I failed, which turned out to be really helpful because I learned, Why, these motors can’t work. As a magnet moves out of one field it will accelerate, gaining kinetic energy, but as it enters the next magnetic field it gives up power, which it regains when it leaves. The most these devices can do is keep rotating using the energy they’re given, but they convert that power between kinetic and,, I forget, magnet,,,, and energy is slowly lost, resulting in the total amount of power decreasing over time.

[@jbarr3551]

Did you build or buy the ferronfluid boxs? How did you build them or where to buy? ThankYou! Great work!

[@p-lr4274]

It needs more magnets on the outside than the inside for the same distance = more torque on stator than rotor. Ex: 30 magnets on rotor and maybe 40 to 50 magnets on stator... depending on results....keep the good work, i've been thinking about it many years ago and I like the way you experiment it and show to the world how magnets react between each other. Good luck, let me know if it works. Thanks !

[@aracknidd]

Wow, this is interesting for me as I made a very close design two yrs ago, I had angular magnets set out much like yours and I would say about the same size but I used beach wood and some shielding using mu metal on each magnet. My results looked much like yours but I had a problem with the rotor axis because of the strong forces involved. I failed to get any indicative results. This seems to go further than my project insofar as almost a complete rotation. great job. My shielding seemed to have a small effect. I calculated the right number of magnets on the stator relative to the rotor so that the magnets had graduation of entry to the opposing magnets, like your diagram 5:43

[@RobertHarrisMIB]

Have you looked into the how back array? And secondly have you considered using laptop or watch batteries to nullify can magnetic forces on whatever end is stopping you? Just an observation. Also a thin strip of zinc or nickel the kind a strip that comes with battery packs, could be used as kind of a kicker for the wheel that won't allow it to go backwards. Kind of like a playing card in the spoke of a wheel on bicycles long ago but positions so it can only click in One Direction and if it tries to go backwards it's prevented by that strip of metal metal

[@jamesbangladosh6246]

if you want that spinning ? shield the other side of the maget..flux ...just open repel or pushing trust...one side... your magnitic flux going all direction... just shiel it.....and it gonna work.

[@giuliapernoi7489]

wrong my friend! You CANNOT shield a magnetic field, you can only bend the flux in different directions and in order to interact with a magnetic field you lose energy. No shitty perpetual motion here. This guy is wasting a lot of time and money for the magnets

[@whtstr2133]

Your wrong, this is not a waste of time. You Are right, somewhat, on the flux, though. The three types of magnetic interaction of metals are absorb, deflect, and pass through (generalized by reaction). "Shielding" is actually absorption with metals like Mu-metal, which doesn't magnetize. If I remember right, Aluminum is a deflective metal. There are metals that allow mag fields to pass through them, without being magnetized themselves. It's all about working the right combination the right way. It's good to be skeptical, but "you'll never win a game without playing".

[@GeoRover]

Nikola Tesla "wasted" a lot of his time and money and look what world we live in now!

[@whtstr2133]

TheGeoRover ... You like electric motors, like fans and starters? He did that. You like electricity? He made a way for you to have it in your home. Unfortunately, he died poor, crazy, and erased from main science by an evil bankster monster. Pretty much the same has gone on since then...Edgar Allen Poe was done this way...

[@driversteve9345]

This video proves to me that free energy is not possible in a magnet motor! If it were possible, they would be available at our local hardware store today!!!

[@adrielpagoto7721]

you're wrong

[@antoniofidalgo2413]

El secreto de que este motor funcione es en la disposición de los imanes ahí es donde radica el secreto como en este ejemplo se ve los imanes están enfrentados lateralmente mismo polo evidentemente tiene que haber una repulsión para que el motor funcione que en este caso no se da aparte que tener en cuenta la distribución de fuerzas mecánicas que se producen el momento de fuerza de un objeto circular o sea que nos están tomando el pelo como siempre

[@David-yy7lb]

You know with all this technology out here it amazing how no one has developed a camera that can see a magnetic field

[@flavioernst902]

Thats impossible. The magnetic fields would have to come somehow to the camera and hit some hall sensors to work. Magnetic Fields dont spread like light.

[@David-yy7lb]

@@flavioernst902 ok I understand now....it just would be cool to see though

[@LarsPallesen]

Wheels with magnets on them rotate slightly worse than wheels with no magnets on them. You're more likely to make a brake than a motor.

[@alphahelix91]

strong magnets, weak brain.

[@NgareM65]

Each magnetized particle becomes a magnet. Which part of the magnet has the greatest magnetic force? Poles. The magnetized particles collect in the magnet's largest direction. So the experiment does not show the actual magnetic field around the permanent magnet. Every test verification requires absolutely SAME performance without inventory! The Johnson engine has a stator of 20 magnets and a rotor only 17. Therefore, the reversal failed. :-/

[@johnM-Jr]

Beautiful. Not enough shielding?

[@levilainpetitfanfoue]

To work properly, the distance between the stator magnets and the rotor magnets should vary to avoid interferences with the neighbor magnets. To me a hypocycloidal shaft would be terrific! (like planetary gears). The magnet situated on the inner wheel would come quickly near the outside wheel one, and then go away.. plus the last part of the movement is practically parallel to the diameter : it would not interfere with the nearby magnets.

[@sergiocanesin]

Dude, get a physics book and stop to talk BS. Hypocycloidal... WOW!

[@IvCastilla]

If you do not use a magnetic shield or neutralize the magnet all times you will arrive to an equilibrium.

[@manjsher3094]

Just think what people will do when the magnet technology in ITER hits mass market ... Can't wait ribbon type super magnets.

[@JF32304]

I do like his approach. I'm with him...I want to see the flux lines so that way I can manipulate then to what I want them to do. It absolutely depends on it!

[@warrenwallace2]

NOW if you make 5 more taking it to a total of 6 and stacked them up mounting them all together offsetting each one you will have a motor that can be hooked to a electric motor and produce electricity

[@llexa3]

and what did you show us with that project exactly im litle confused... no offense really, i'm just curious do you have a biger vision about that or you just did build that out of pasion ?

[@НестерЁнки]

Уже КРАСИВО! А что с нами будет, когда эта красота заработает? Успехов! Привет из России :)

[@snyderdeepin769]

Did you try putting the ball magnets into tubes inside a x y axis where the balls could act as there own magnetic switch or gate to overcome the static flux and continue to perpetuate on the initial wave that is induced bye a push or pull

[@mixer0014]

He is the only conspiracy theorist actually „doing his research” as they say. Congratulations, you have my respect even when being wrong.

[@constantinvasile2964]

Rotorului îi trebuie inerție mai mare, iar magneții Trebuie mai puțini. Și direcționarea lor este inutilă pentru că polii formează sfere de influență, nu linii directe. Liniile directe apar ulterior la apropierea lor. Dar procentajul dintre atractie și respingere este mai mare pentru atracție. Măsoară cuun balansoar cu 4 magneți identici ca forță. Mai bine încerci doar atracția pe fier. Fierul în interiorul cercului să beneficiezi de accelerația unghiulară. (Rotor exterior magneți, stator interior fi din fier).

[@TinkeringNerd]

Yet another video about how magnet motors don't work!

[@OtakuDude93]

But with electromagnets theres a variation of magnetic field, its like pushing the wheel one magnet at a time, with magnets they just grab the wheel, try to stop it, not push it. Dont call people stupid if you are the stupid/ignorant dude.

[@JohnSmith-lb3ge]

Norm T Electric motors run on electricity i.e. moving electrons that create a MOVING magnetic field, that's the difference

[@bobbyea9109]

Who tell you magnets dont have moving electrons? The diference is couse magnet is himself closed and in electrical power circuit are cloused in ground or a battery.

[@bobbyea9109]

For me is a matter of time until somone find a tehnologicaly way to make a self motor from them

[@JohnSmith-lb3ge]

Magnets have been around for a long time, so have smart people, if it could be done someone would have done it by now

[@azkwick79]

Try putting the inner wheel magnets at the Angle of the golden spiral ratio, or use curved magnets. You'll notice less resistance. ;)

[@nelute5]

Din experimentele mele, am stabilit că dacă folosesc pentru ecranare bucăți de tablă de oțel, de diferite grosimi, puse în partea de apropiere a magneților, rezultatul e mult mai bun. totul e să se determine grosimea necesară a tablei, care anulează forța de respingere între agneți, pentru a permite apropierea .Masa metalică a tablei fixate pe stator, înainte de fiecare magnet, chiar de forma literei „L” ca să acopere și ceva mai mult din suprafața magnetului , va exercita o forță de atracție față de magnetul de pe rotor, egală cu forța de respingere a magnetului de pe stator. În acest fel „două forțe egale dar de sens opus, rezultanta e zero” . Deci, magnetul de pe stator respinge pe cel de pe rotor cu o forță, dar masa metalică a tablei exercită o forță de atracție a aceluiaș magnet de pe rotor, și în acest fel cele două forțe sunt anulate, deci magnetul de pe rotor se va apropia de cel de pe stator fără a se opune ceva. Problema apare la depărtarea magnetului de pe rotor, pentru că tinde să rămână „agățat” de masa metalică a tablei. Punând grosimea potrivită și forma corespunzătoare pentru a nu mai „agăța” la îndepărtare, și a permite forței de respingere să-și facă treaba, e posibil să se obțină rotirea la infinit (puteți vedea și un film al meu, în care pun în discuție ideea unui motor bielă-manivelă).

[@1061shot]

Have u tried alternating pos. neg. pos. neg. ? To cancel out equaliblium?

[@АлександрБорисенко-н3э]

В статоре магниты должны быть под углом, чтобы не останавливался, а в роторе 27-32 градуса к оси

[@luebke73]

Just remove any magnet and your "motor" will rotate much longer! Thank for research on magnetic breaks! :)

[@Blaznguy36]

I could have save you a lot of time. The law of motion is half times whatever you trying to do. when you see acceleration in the equation, it means you need an outside source or a storage of energy. Then you got the laws of friction and drag to calculate.

[@MehmetBoysal]

The design needs to be changed for this thing to work.

[@timc7595]

Hi! To get past the issue magnetic field "locking", you need pulsed shielding of the magnets. You need to intermittently shield the magnetic fields of the driving magnets and the rotor magnets. This can be achieved using a small circuit board and power supply. Although it will require some input power, you should be able to achieve over-unity with the proper frequency of pulsed shielding. This pulsed shielding can be achieved by mechanically moving the shield using a motor, or by pulsed electrical current powering an electromagnet. Try using a smaller number of electromagnets for your driving motors and develop a circuit to pulse the magnets on/off as the wheel turns, so that they are only driving it in one direction.

[@Hizenbird]

You could also use that power supply you speak of to turn a small motor connected to the shaft/rotor.In which case you can eliminate the magnets altogether :)

[@timc7595]

What? The point of using the magnetic assembly is to convert the potential energy stored in the magnetic field into mechanical energy. The output of the device will be higher than the power input for the small motor. You're trolling right?

[@truthhurts1333]

osu sucks good ideas!

[@Hizenbird]

If "the output of the device will be higher than the power input for the small motor" then you could just have the output power the input. In other words You do not pass GO.

[@timc7595]

You could do that once it's running, but you'll need an external force to set the machine in motion. Kind of like hand starting a radial propeller engine.

[@tigeroll]

The piano sounded nice.

[@cramkan]

good idea..magnes are 2...u need a 3 to create rotation/movement flat on the table u cant use gravitation..

[@levilainpetitfanfoue]

You could also obtain very interesting results using reuleau triangles.

[@我的世界-d2l]

You do great, especially want to know your progress now, very much hope to see your project can be successful, look forward to!

[@husseinalhajri8018]

how about rotating the outside magnets to avoid the stopping point! and by rotating them i ment using gears from the inside disk so the inside disk as it moves can rotate the outside magnets, and hopefully avoid the stopping point. I want it to try this but i don't have the equipment u r having. good luck i hope you succeed.

[@homuchoghoma6789]

Лайк конечно за упорство, но чеснае слово нестоило так напрягаться чтобы порадовать меня видосиком)

[@ИгорьКоролев-ь2ы]

Сколько времени и денег и труда загублено,но все же к этому тянет людей

[@georgeabraham4285]

11/10 = 1.1 make the fly wheel heavier until it works, you'll get caught between inertia and velocity so it's possibly not just about overcoming one movement to start. All you need to know that this works is that a magnet can levitate.. at 3-8 times the force of gravity. It's a constant force, but so is gravity.. so a falling bowling ball does not stay the same speed... you have satellites in orbit for heavens sake.. What's so hard to believe about this stuff.. ;-)

[@David-td1tf]

This will work he's just missing something obvious. Perpetual motion is the change of one form of energy to another, a cycle... Energy is everywhere you've just got to channel it the right way.

[@PinchOfLuck]

Wrong construction. Look at Parendev magnet placement. They are at a specific placement angle so they form an ever forming arrow (1 magnet in front, 2 to the side, then 2 more etc.).

[@juliodelgado705]

Where can I purchase your work? With out the magnets?

[@SupersonicHeart]

Philosopher's Stone will help you

[@joeyanglada1275]

I'm wondering what will happen if a paramagnetic or a diamagnetic metal is placed between each row

[@vigramm]

Energy from magnet can be obtained without any mechanical movement. All we need is material capable of being converted from magnetic to nonmagnetic when applying electrical impulses. This will simulate the rotation of the armature in the generators. Such a material was created for other purposes and there is technology. More info ?

[@purge_thehumanrace]

So thats how the wheel of fortunes wheel was made. I knew that sh!t was rigged

[@ninosbinno8465]

Good try save people a lot of work. And thanks for not lying as most do. Shielding of some sort may go a long way. I suggest low carbon steal like 1002 or 1004 1006.

[@johnjohn5224]

try having the same poles facing each outher as they will repel each outher and angle the outside ones it should continu to spin 4 eva

[@johneymute]

On the first magnet motor, i thing you should,ve to put both of those magnets on the wheel and those surroundkng magnets closer together,sothat there should be no cogging between each magnets.

[@jasonsoto3566]

This device is like the Philosophers stone. The reward reaped is so tremendous that i would change the world, however our understanding points towards it being impossible :

[@meunomeeplissken3088]

O campo magnético enfraquecido gradativamente é a solução

[@user-cd5fi6zk1o]

The only thing your missing is little wheels that have spinning magnets to keep momentum and could have the little wheels have a crank that compresses a cylinder that recranks another small wheel with same air cylinder yo turn instead of the momentum wheel I have seen these before