Magnetic saw guide, everybody can make it

Wow, this is amazing! Thank you very much Mikel!

[@Mikhandmaker]

I hope you enjoy it!

I will keep it in honor, my friend.

[@berndziller2793]

Stephan Pöhnlein &

[@berndziller2793]

Stephan Pöhnlein o

[@timpenner7858]

Bravo for showing us the tool first. I usually have to skip to the end of these diy tool videos to see what they're making.

[@LitoGeorge]

Excellent production and product. Very enjoyable.

[@markbaker9459]

Aloha from Oahu ! Great additions to my little workshop ! For the past 40 years , I've been is serious construction , but 7 years ago ,I took a little trip over the 'rainbow' and didn't end up in Kansas . Now , all I can safely do is work with unpowered tools . But what little bit of power needed to make your tools and jigs is a blessing ! Hope I can give you some of my designs that also keep crews of carpenters at work . Today's addition to your page [the saw sharpening jig is 'first class' . I'm still plagued by lasting damage from my little accident and the 2 month coma that followed but the vertigo it left me with , keeps me away from the big stuff that could eat me alive . I don't see many pages that make me say ,'I really need that' , as yours does . Mahalo, Mark Baker ,down but not for the count !

[@JoseMETALMUNDO]

Espectacular! Me he quedado viendo el video con la boca abierta. Eres todo un auténtico ebanista, todo un auténtico artesano! Me acabo de suscribir a tu canal y te aseguro que no me voy a perder ninguno de tus vídeos. Un fuerte saludo

[@Mikhandmaker]

INOX MUNDO Muchas gracias! Entonces ambos nos seguiremos uno al otro Xq espero aprender muchas cosas de como trabajar el metal contigo!! Saludos

[@dezsokosa9182]

Beautiful work and hypnotic music. It was a pleasure to watch and listen. Thanks!

[@Mikhandmaker]

I'm glad you enjoyed it, thanks!!

[@751815218]

Jawdropping technique and hand made tools, thanks for this awesome ideas, blessings and big hug from Puerto Rico!! Ray Ray

[@phillipa.rudolph7737]

very nice technique to achieve the rounded ends with the washers, good build.

[@Mikhandmaker]

It is an easy and effective way to make rounded ends. Thanks Phillip!!

[@Bricoleando]

Que pasada de guía. Ademas de útil te ha quedado fantástica, no hace falta explicaciones de su construcción, la edición del vídeo habla por si solo. Enhorabuena.

[@Mikhandmaker]

Intente que se viesen los pasos lo mejor posible! Gracias amigo

[@mauricejenkins6261]

This is one of the most in-genius pieces of equipment i have seen... for a person like me that cannot cut a straight line to save his life...... many thanks

[@Mikhandmaker]

Thanks for the comment Maurice! I appreciate it

[@MacJuanma479]

It's a real pleasure to see you at work, Mikel. Your tools are not just useful, but also beautiful. Your care & "love" when crafting them is awesome. I'm going to do one of these but I ordered the wrong magnets. I have 10x2 mm magnets coming. I'll try to do my best with them. Maybe to put two rows of 10x2 mm instead of one row of 12x3 mm as your specs are.

[@jdhurrell]

Outstanding craftsmanship.

[@Mikhandmaker]

I appreciate your words John!

[@chrisstearns10]

I was going to make a few dovetail jigs for different angles, then I saw this and figured better make two of these, awesome build😁👍👍👍👍👍

[@WoodByWright]

Very cool. Love finding another hand tool channel.

[@Mikhandmaker]

Thanks for your comment, I admire your works!

[@thomasklink3766]

Excellent, I'm going to build one. Caught the video on Instructables.

[@Mikhandmaker]

Thank you very much!!

[@marcelotanaka5911]

Another beautifull job. Congratulations !

[@Mikhandmaker]

Thanks Marcelo!

[@zafardurrani9544]

Wow, what a great idea I like it Thank you for this wonderful video and Excellent invention

[@Mikhandmaker]

Thanks for your comment 👍👍

[@erikjoven2388]

I've been watching more and more of your videos and i love the look and functionality of all the little tools and aids you make. This is quickly becoming my new favorite wood working channel next to Paul Sellers! lol

[@Mikhandmaker]

Wow, it's an honor for me to hear that!! Within the next few days, I'm uploading a new video a bit different from the others, but at least for me a very useful tool. I hope that you like as much as the others. Thank you very much for the support!!

[@StuffUCanMake]

This my friend is really ingenious. You are an A+ maker!!

[@Mikhandmaker]

Thanks mate! I appreciate it ;-)

[@valterferreirabr]

Amazing! beautiful work my friend.

[@markbaker9459]

Simple is best , all your nice saw guide is just that !!

[@tintow_uk]

Great video and a great project. I liked it so much I followed your instructable and made one for myself. It turned out amazing and I've already used it in several other projects. Keep up the great work and keep the videos coming.

[@Mikhandmaker]

I'm glad to hear that!! It's fantastic that you made one for yourself and that you're happy with it. This type of comments encourage me to show you more videos, thanks!!

[@jordicm4448]

Fantástico trabajo!me encanta ver lo bien que tratas la madera y el cuidado que tienes realizando los trabajos,magnifico detalle para Stephan Pöhnlein,A disfrutarlo! Un saludo y sigue así.

[@Mikhandmaker]

Muchas gracias Jordi! Comentarios como el tuyo me animan a seguir así

[@eloyworkshop541]

Trabaja la madera como un cirujano, precisión total jajajjajaja

[@jorgecarlos6282]

Sencillo y perfecto. Es precisamente lo que estaba buscando, tenía algunas ideas en la cabeza, pero no cabe duda que lo más simple siempre es lo mejor, además es muy elegante. Me quedo con este diseño. Gracias.

[@Mikhandmaker]

Gracias a ti Jorge por tu comentario! Si es que te animas a construirlo, ahora después de la experiencia, le pondría unos tornillos con palometas o algo similar para no tener que depender de un destornillador. Saludos

[@subbasslines]

Thanks for sharing your skills, it was pleasure watching you work.

[@Mikhandmaker]

Thanks to you for stop and comment!!

[@MakingHuertasstuff]

Mikel. Impresionante me dejas con la boca abierta y con ganas de ver mas.Un saludo compañero

[@Mikhandmaker]

Gracias Fermín!! Me alegra oír eso

[@stephaniefox2180]

Sorry was being lazy just seen the link amazing tool thanks for sharing the knowledge

[@Mikhandmaker]

hahaha thank you for the comment! ;-)

[@Gelovan682]

Really love this video. One thought-maybe use depth stop to make sure the recess for the magnets are all precisely the same depth.

[@Saartekk]

Wow! Very beauty and needful Work... Love it!

[@Mikhandmaker]

Yes, I find it very useful, thanks for your comment!!!

[@antonioruiz1903]

Hola Mikel 😅 Leyendo los comentarios he visto que así te llamase Por los pocos proyectos que te llevo viendo , veo que no haces ningún proyecto sencillo 😅 todo lo haces de un esquisito superior a la mayoría Te sigo descubriendo poco a poco Henhorabuena maestro 👌 Un abrazo 🤗 Badalona

[@woodfather]

Very beautiful and helpful little tool!

[@Mikhandmaker]

Thanks Mario!! Welcome👍

[@patriciamoran9663]

That is great and beautiful too! I saw Stephan using it and had to see.

[@Mikhandmaker]

Stephen! Thanks for the comment

[@k.b.woodworker3250]

Thank you for this wonderful video!

[@Mikhandmaker]

Thank you for the comment

[@BanjoShow]

Mikel is a great tool! Awesome project!

[@Mikhandmaker]

Thanks, I really appreciate your comment

[@rodv7779]

Brilliant idea and top notch precision. I love your work and keep them coming sir!

[@Mikhandmaker]

I'm glad you like it and I hope you will also like my next videos. Thank you!.

[@rodv7779]

I'm definitely looking forward to it. Subscribed :)

[@berniesr]

Looks great and a very nice video.

[@Mikhandmaker]

Thanks for the comment!!

[@luisrivasgesell]

excelente idea y terminación felicitaciones un saludo desde Argentina

[@Mikhandmaker]

Gracias por el comentario!! Saludos desde España

[@Arcum11]

Yeah! That is it! Nice video,magnificent work and an efficient tool.

[@Mikhandmaker]

Thanks for the comment!!!

[@Glenfiddich101]

WoW !! What better gift could one make for a woodworking friend 😁👍 This is the second video I have watched from your channel Mik and I have loved both of them, they are very intuitive so I am going to subscribe to your channel and give the thumbs up as well 👍 I love the music by the way 🎹 👍 Glen from the UK ⚒

[@Mikhandmaker]

Thank you very much for the comment and welcome to my channel, I'm glad to have you in the community

[@csokiscsoroge]

That is a thing of beauty !

[@london_roubenl]

Excellent, Thankyou for your time and the knowledge

[@Mikhandmaker]

Thanks Rouben for de comment! I appreciate it

[@sabinerehak5450]

top job, wie immer bin ich Begeistert.

[@Mikhandmaker]

Danke, Sabine!

[@paulrichmond6903]

Very nicely done!

[@Mikhandmaker]

Thanks Paul!

[@richardbutterfoss2353]

Excellent project!

[@Mikhandmaker]

Thanks Richard!

[@blackfender100]

Super nice thank you so much for sharing.

[@Mikhandmaker]

Thanks to you Joe for comment!

[@StuartAylward]

Genius. Another fantastic piece of work. Totally subscribing to your channel. :) Love the style of video as well! Brings a sense of peace and serenity to woodworking!!

[@Mikhandmaker]

Thank you very much for the comment and welcome to my channel!

[@aprendiendoenelgaraje672]

muy bonito y muy bien rematado un abrazo compañero

[@Mikhandmaker]

Muchas gracias compañero! Saludos

[@angelatedo]

¡¡Impresionante!! Y el manejo de las herramientas manuales superior. Saludos, Ángel

[@Mikhandmaker]

Muchas gracias Ángel! Me alegra que te guste, cada día me gusta mas utilizar herramienta manual Saludos

[@markbaker9459]

Now that vertigo has removed me from working and making $$ as I have for years , I still seek to earn for my households needs . Any 'unplugged' means to this end is great , Thanks !!

[@jesuspozosalvizo8345]

excelente, muchas gracias por compartirlo, la guía para taladro también esta genial, saludos !!!

[@Mikhandmaker]

Gracias Jesus! Si como ves la guía para el talado es muy sencilla, pero hace que la broca entre muy recta

[@DavidEricPrates]

Very cool dude! Master craftsman at work!

[@Mikhandmaker]

Thanks! Means a lot

[@DavidEricPrates]

You bet!! By the way, I subscribed! I hope I can earn yours too.😊

[@MrFrancogi]

very nice, and beautiful music!

[@Mikhandmaker]

Grazie Franco!!

[@toms4123]

Great one Mike

[@Mikhandmaker]

Thanks!

[@vicentegalvez1491]

Que trabajo tan fino. Gracias por compartirlo. Saludos.

[@Mikhandmaker]

Gracias Vicente!! ;-)

[@london_roubenl]

My pleasure, beautiful simple craft

[@rymw5295]

Wow such a great idea! Both the tool and the video are so well done. Recently bought a sliding hand mitre saw but struggling to get consistent straight cuts for some hand made picture frames so I might try this thanks :)

[@guillermojanner5369]

Simply beautiful!

[@Mikhandmaker]

Thanks Guillermo!!

[@Bricocrack]

Excelente vídeo, compañero!

[@Mikhandmaker]

Muchas gracias! 😉

[@ClintRoseCarving]

Very cool idea, I like it!

[@Mikhandmaker]

Thank you!

[@VoteEvilDrumsNow]

This is briliant!!

[@PauloAzuaga]

Love your art work...

[@Mikhandmaker]

I apreciate your support!!!

[@BCdesign1]

Nice tool Mikel, I love homemade tools!

[@Mikhandmaker]

Thanks I love them too!!

[@cicero1467]

Excellent job.!

[@Mikhandmaker]

Thanks Mauriti!

[@AlansWoodworking]

Lovely work!

[@Mikhandmaker]

+Alans Woodworking Thanks ;-)

[@TheKlickitat]

Good video. Mixed feelings though about the guide. On one hand, it works great and I LOVE the adjustability. On the other hand, I could see where the saw was pulled off to the side and the magnets kept the cut true as intended, but am afraid that this might cause bad habits and would hinder learning proper technique.

[@Mikhandmaker]

I understand what you say, I try not to use always the guide in order not to get bad habits. Thanks for your opinion!

[@JENNISWISS]

so nice idea. cool video✌️️

[@pradeepshinde9705]

That was beautiful. I wonder how to use that plane

[@Lemongrasspicker]

That is very cool, thanks for sharing, going to go make my own now

[@Mikhandmaker]

Thanks for watching and commenting appreciate your support

[@resultcarpentry5869]

Wonderfull work - thank you :-)

[@Mikhandmaker]

Thanks to you comment Gary!

[@Customsmaker]

Es la victorinox de las guías!

[@Mikhandmaker]

Le faltaría el abridor de botellas ☺️☺️☺️

[@noyche]

buen brabajo, buena musica y buenos acabados, saludos

[@Mikhandmaker]

Muchas gracias ;-)

[@SethsProject]

Awesome video!! Amazing tool as well :) I really loved the music for some reason x)

[@Mikhandmaker]

Thanks! I appreciate your comment

[@mikewhipp2984]

Well done. Great tool. Good idea using the washers to get that perfect round over. Also, I just wanted to let you know I got your channel from James Wright from wood by Wright. He gave this tool a shout out. I subribed and look forward to more videos.

[@Mikhandmaker]

Thank you very much. I have just learnt of the recommendation from James Wright thanks to you. It was the first time I used the washers for it and the result was excellent!!

[@AllesohneKabel]

very nice, great job !

[@Mikhandmaker]

AllesohneKabel Thanks!! ;)

[@derschotte]

Beautiful! Thank you!

[@Mikhandmaker]

Thank you very much!

[@davidurregodavid9694]

excelente trabajo como siempre... tengo una pregunta como hace o que dispositivo se utiliza para manipular el cepillo (en el lapso del vídeo del 1:24-1:28) de forma "horizontal". Me genera mucha curiosidad poderle dar esa aplicación a mi herramienta de antemano mil gracias

[@Mikhandmaker]

Hola David! Me vas a perdonar pero solo conozco su nombre en ingles, te refieres a la "shooting board" es una de las mejores plantillas para dejar una planimetría casi perfecta en la madera, tengo un video (guías básicas para tu taller) que muestro un poco mas de cerca su funcionamiento Saludos

[@Julienbuff]

Hello! Thanks for thé vidéo ! This is a great innovation and inspiration ! I think doing the same for me. Could you please tell me the brand of your double sided adesif tape ?

[@JulianDoIt]

Great project. I enjoyed watching :)

[@Mikhandmaker]

Thanks Man!!

[@fractaltribe]

Awesome project! Curious, what is the track you put in the background of this video!?!

[@ant36au]

Great work.Will you do an instructable on the dovetail jig please?

[@Mikhandmaker]

Thanks a lot, of this magnetic saw guide I already have instructable, you can see the link in the description box.

[@israelGarrido]

Interesante util! Buena edición

[@Mikhandmaker]

Muchas gracias Israel!

[@AJ-iu6nw]

awesome little tool. Can you tell me what the name of the board you use for planing the end grain is? I've seen it in japanese woodworking videos 1:25

[@Mikhandmaker]

Thanks! It is called shooting board, I recommend it to you!

[@StavrosGakos]

Brilliant tool

[@Mikhandmaker]

Thanks man!

[@tomharries847]

another awesome video. i am so awe inspired :-)

[@Mikhandmaker]

Thanks mate!!

[@doily5732]

Very nice!!!

[@Mikhandmaker]

Thanks!!

[@Baschroe]

So cool! A really great and useful tool! :)

[@Mikhandmaker]

Thanks for watching!

[@Metallurg33]

Again, nice work and very good video. Maybe I missed it, but what are the magnets in the top of the rail of the shooting board for?

[@Mikhandmaker]

Do you refer the magnet of the 2:06'? This is another guide to get the cut straight, I don't know if this solve your doubt... Thanks for the comment.

[@Metallurg33]

When I look at again, I realized that I mistook the screw heads for small magnets.

[@Mikhandmaker]

That's it, those are the screws for tighten.

[@eloyworkshop541]

Hola amigo, menudo acabado!!! digno de estar en una tienda para ebanistas, un abrazo!!!

[@Mikhandmaker]

Muchas gracias Eloy, ahora una vez hecho creo que se le podría hacer alguna mejora, como por ejemplo cambiar ese tipo de tornillos por una palometa o algo similar, para no tener que utilizar un destornillador...

[@eloyworkshop541]

Mikhandmaker muy buena idea!!! te ha quedado realmente chulo, te felicito

[@doblejj]

Hola @Mikhandmaker, cómo se llama la herramienta que utilizas para realizar la linea y así saber has donde tienes que desbastar? La que aparece a partir del segundo 0:59? He visto que parte del material que utilizas está en español, lo que no se es sí vives en España. Simplemente es para saber cómo se llama aquí en España. Aprovecho también para preguntarte qué dos tipos de madera utilizas para este trabajo. Mil gracias. Sigue trabajando como lo haces, me encantan tus videos.

[@Mikhandmaker]

Hola Juan José, lo primero de todo darte las gracias por tu comentario!! La herramienta que utilizo aquí en España (de donde soy) se llama "gramil" hay muchísimos modelos pero en sí todos desempeñan la misma función, ese en concreto es de la marca Veritas, para mi de los mejores... La madera que utilicé fue: la clara haya y la oscura sapelli.

[@doblejj]

Mikhandmaker gracias por tu pronta respuesta (como siempre). Dónde compras ese tipo de material (gramil y distintos tipos de madera), por internet? Aquí por mi zona sólo tengo grandes superficies comerciales, como Aki, Leroy Merlin, Bauhaus, etc. Soy del sur. Un saludo.

[@Mikhandmaker]

Hola Juan! Pues en esas grandes superficies este tipo de herramientas por desgracia son imposibles de conseguir, yo suelo comprar por amazon o alguna otra web, te dejo un link de ese gramil en concreto (Joya) amzn.to/2y8kpI4 aunque también puedes conseguirlos mas económicos y que te darán igual resultado como este otro amzn.to/2AFVf6E para el tema de las maderas suelo ir a un almacén que se dedica a la venta de madera y ahi puedo encontrar más variedad de madera que no sea pino...... Pero también te digo que el precio no es nada barato!! Si tienes la oportunidad de comprarlo directamente en un aserradero los precios son mucho mas baratos. Espero haberte ayudado

[@doblejj]

Mikhandmaker Pues aserraderos por Málaga pocos. jejeje. Aunque almacenes de madera si que tengo. A ver a quién engaño que me de unos pocos retalws.Gracias por tu respuesta. Me he visto el video de la guía imantada por lo menos 7 veces. No sólo la belleza visual, sino la tranquilidad que transmite. Te va a parecer que soy un fan loco!!!Jajjajaa. Pasa buen puente. Mil graciad mik.

[@Mikhandmaker]

Jajaja tienes razón yo soy del norte y aquí hay varios, pero eso si no te venden un pedacito... Muchas gracias por tus palabras cuando empecé en esto pensé que solo me vería mi familia 😂😂 Disfruta del puente por cierto mi nombre es Mikel!

[@HerbertHabanero]

Great job! What was the finish that was applied? Thanks :)

[@Mikhandmaker]

Thanks for the comment, use wax

[@fernandocastillo-of4su]

nice tool

[@Mikhandmaker]

Thanks Fernando!

[@Mikhandmaker]

Thanks!!!

[@robertbrunston5406]

Thank you.

[@walterrider9600]

thank you good stuff

[@Mikhandmaker]

Thanks!!

[@miguelelmc]

Excelente!!!

[@ABeardedPanda]

I just found your channel today, so glad I did. Love your video's!!

[@Mikhandmaker]

I'm also so glad of receiving comments like your's, Thank you very much!!

[@stephaniefox2180]

Would like to make this What type of wood and what are the sizes of screw bolts magnets etc

[@Mikhandmaker]

I leave a link ;-) www.instructables.com/id/Multi-Angle-Magnetic-Hand-Saw-Guide/

[@Cactusworkshopchannel]

Muy buena!

[@Mikhandmaker]

Gracias! :)

[@yzemaze]

This is just a beautiful tool. Very well done :) Did you consider using wing nuts?

[@Mikhandmaker]

+yzemaze Thank you Very much. Yes, if i had to make it again probably I would use them for a faster thightening.

[@marcenariadehobby1016]

Top Demais!!!

[@luisizquierdo4686]

Hola Mikhandmaker! Ya tienes un nuevo suscriptor, iré viendo los vídeos :) Interesante lo de las guías magnéticas y el acabado es excelente! Me gustaría preguntarte algunas cosas: ¿dónde se pueden conseguir esos imanes?, ¿qué madera has utilizado? y por último ¿cómo se llaman los pasadores roscados que has usado y dónde puedo conseguirlos? Gracias, un saludo!

[@Mikhandmaker]

Gracias Luis! Te cuento los imanes esos o parecidos los puedes conseguir en Alixpress o en Amazon, búscalos utilizando la palabra NEODIMiOS hay multitud de medidas, en Alixpress son más baratos pero tardaras más en recibirlos... Las maderas que yo utilicé fueron haya para la pieza central y shapely para las tapas pero cualquier otra te podría servir incluso DM! Respecto a los tornillos creo recordar que son de ensamblaje, yo los compre en Bricomart pero les encontraras en casi todas las ferreterías

[@Mikhandmaker]

Por cierto como consejo, ahora que ya lo hice opino que debí comprar los tornillos de mayor largura para que las tres piezas encajaran en el macho del tornillo Para cualquier duda ya sabes! Saludos

[@luisizquierdo4686]

Muchas gracias por contestarme y por la rapidez! Miraré lo de los imanes como me dices y pasaré por alguna ferretería a ver si encuentro los tornillos. Llegué a tu canal a través de foromadera, gracias por dejar el enlace. He vuelto a ver el vídeo y aprovecho para felicitarte por la edición (planos, iluminación, sonidos del proceso de construcción y música), no es común encontrar vídeos de calidad. De nuevo muchas gracias! Un saludo!