Magnuson 2650 C7 Z06 hits the dyno...

In Today's video we have a C7 Z06 that had some serious engine failure due to another shops mistakes. We corrected those mistakes and exceeded this customers expectations find out how and what happened.
Website - lmpofmd.com/
For appointments and quotes please email [e-mail]
Don't forget to follow us on facebook and instagram - Late Model Performance

[@chrisedward91]

I’m going through it, been waiting 8 months for my c7 to get finished Dope build!!

[@dnbaddict]

Damn! I think just over 900hp is a sweet spot. Anything way over that is just spinning and grinning!

[@lanegeisewite1436]

Finally some C7 Z06 action! Badass car! Keep it up guys!🇺🇲🇺🇲🇺🇲💪💪💪

[@jplperformance9073]

Badass build

[@lostinawareness7979]

Do y'all make a lid for the maggie?

[@JMGENTERPRISES]

Nice!

[@Gullyswift3]

I’d love to see del’s set up in a C7Z i bet it would be a monster

[@LateModelPerformance]

Del’s is our stage 4 package, we’ve done a bunch on C7 Zs, but not everyone races as much as he does or is as local for us to constantly document.

[@SrtHemiPower]

@@LateModelPerformancehow much horspower are those magnuson capable of making

[@ltrclwn]

@latemodelperformance what wheels are they?

[@corypierce202]

Is that a 38 or 42 fuel lobe?

[@Ruthlesszl1]

Nasty 🔥🔥🔥

[@SuperJj2468]

What size TB did car have on originally before you went to kong 120 mm ? A kong 112 mm?

[@LateModelPerformance]

yes 112

[@kolbyhumbert2680]

What’s a cam install & tune cost roughly for a bolt on 6th gen camaro? Thanks

[@SleepyC6Z]

This might be a dumb question but for a N/A build which would be a ideal daily C7 Grandsport M7 or C6 Z? Goal would be 600-700hp

[@peterb4143]

It’s not dumb at all, but a C6 Z can easily make a lot more than the C7, with a good set of intake/heads and a big cam you can make north of 600whp on pump gas or almost 700 to the crank

[@yeezydidit]

C6 Z. You can make them have 700+whp revving to 8k . I’ve seen na c6zs beat c6 zr1 making 850whp…

[@raafiforde9605]

Are you guys getting any more of your LT4 lids? I need that in my life.

[@LateModelPerformance]

Yes making more now give us a call we can set you up!

[@mr171009]

416 stroker?

[@stevenlynch9947]

Damn good 922 on 93

[@stichy210]

What's up with the catch can? why does "Smoke" come out of it is it vapor?

[@douchedidit9222]

Now think if it didn’t have a catch can that vapor aka crankcase pressure will push oil into the intake which is bad

[@douchedidit9222]

Atleast I’m pretty sure 😂

[@stichy210]

@@douchedidit9222 thanks for the info I didn’t know exactly what it was I’ve never seen that before

[@yeezydidit]

It’s blow by.

[@turkybader9943]

What name wheels

[@terrellmiller9218]

When y’all making a blackwing build we seen it in the video 😳😳😳

[@LateModelPerformance]

We’ll have some more in it soon!

[@chrisserthedisser]

​@@LateModelPerformance 2650 blower in blk wing?

[@LateModelPerformance]

It can't be tuned still, so options are limited. No we will not be putting a 2650 on one.

[@danielboone94]

​@@LateModelPerformance why not?

[@danielboone94]

​@@LateModelPerformance Kong performance mods?

[@Contreras-z4e]

That C7 builders nasty

[@jeffnoob8448]

Wow

[@CamaroThings]

Why must we explain "sense" on the internet?... Because it's The Internet #pain

[@JMGENTERPRISES]

Is this on the stock bottom end?

[@LateModelPerformance]

We explain at 2:00 that it has a 416 now and why

[@mach183]

@@LateModelPerformanceMay I ask what kind of fuel system ? And is a fore triple pump system enough for a 1000 rwhp set up with the 2650?

[@douchedidit9222]

I feel like that busted screen was from a long night of tuning 😂

[@TsukuyomiPlayz]

😂

[@LateModelPerformance]

Having the laptop in the racecar during a pass and it wheeling and coming down hard.

[@jeffaquilino1806]

How much power can you make safely with a stock SBE with ported heads cam ported blower fuel system as needed. Full Bolt on car with automatic

[@adamgriffin]

700's to the wheels safely SBE. When you get to 800+ you need a shortblock or your on borrowed time. (spun bearings)

[@user-iz4xe1ep9h]

Your SBE will handle whatever you can throw at it with a stock blower. An cam + x port will be 850 on E which is problem for sbe.

[@speedlife301]

Stock blocks can handle 900-950 whp from a roots . 1000whp + from a centrifugal blower because the boost at low rpm hits much softer and is easy on rods and engine.

[@ChurchAutoTest]

@@speedlife301 100%. LT4 bottom end is plenty tough, especially on ethanol (wouldn't feel great about it on pump gas). I've seen many guys go years on 800-900 without issues.

[@alexander_3923]

@@speedlife301do u know how to fix the zo6 c7 overheating problem?

[@slidinsidewayzproductionss7906]

Somebody had to have I talked that gasket like that on purpose who ever put it together for him new he had money and wanted him to come back

[@craigscott6253]

:10 reply with the boys.. what you wanttttttt 😅

[@PhillyDee215]

🤦‍♂️See....I knew i left at least 50whp on that dyno

[@speedlife301]

50 whp isn’t worth blowing up your engine

[@PhillyDee215]

@@speedlife301 facts.....but I had 50whp easily

[@ChanceLaChapelle]

it’s amazing how much work has to go into these LTs to make that kind of power when you can literally just strap a couple turbos and a fuel system on a coyote and get pretty damn close to this

[@TsukuyomiPlayz]

This is reliable 1000hp, not ticking time bomb 1000hp.

[@ChanceLaChapelle]

@@TsukuyomiPlayz no i get it 100%! I blew up my gen 2 making 700 wheel before i built it so trust me i know the coyote isn’t the be all end all motor. Just saying it’s interesting to see the difference in HOW accessible this power is. Takes a lot of work to make these things make great power. With a coyote, not so much but definitely isn’t gonna last. You get to have your fun though, blow it up then build it better!

[@ChurchAutoTest]

Doesn't take that much work. Yeah, the stock blower has a hard time getting there without a Kong X-port so a blower upgrade is nice. But the biggest PITA is the stock DI fuel system being way too small. Coyote is easy because it still has port injectors. Minus the fuel system issues, LT motors make power very easily.

[@oldschool6268]

Or do a vortec motor and turbo's with bigger injectors, pump, intercooler, and ring gap and blow by both.😊

[@tommyyancy3902]

Gen 2 is pretty stout, how did you blow it up at 700hp? Seems like something not right?

[@ronp7917]

Does this setup not have meth???

[@LateModelPerformance]

Yes it does

[@thesudzy22]

Does the car run meth?

[@LateModelPerformance]

yes it has meth injection.

[@gregoryrobinson1004]

Nasty nasty ,

[@quillanthrasher6846]

It's funny you think it's funny to tell your wife one thing and do another. It's a shame someone actually wants to see you and you'd rather waste time working for the man. When your time comes to an end you'll look back and regret it trust me

[@mach183]

It’s funny..