Magpul - So You Want to Buy A Shotgun - Part 2: Upgrades

[@apex403]

Snap caps have been a worthwhile investment - when it's long stretches to get to the range, it's nice to load up a side saddle and just go through the practice of loading, just so muscle memory stays strong

[@umbrellacorpmarketingdept7154]

The fact that you didn’t say anything along the lines of “only our products are worth using” makes me want to use them more. SGA stock is near on the horizon.

[@caltindale194]

Absolutely love magpuls furniture. First upgrade on my current ruger American rifles, and my 870’s is to put a magpul stock on them.

[@jeffadams9807]

My 3 Upgrade's Choice's: #1) Streamlight TL-Racker, 1000 Lumen Foregrip / Light Combo... #2) 6 Rd Side Saddle Card... #3) Tactaload Flash 5 Stock...

[@trevordelarosa3599]

Just ordered an sga stock and moe forend for my 870. They're supposed to be here in a couple of days and I'm super excited to put them on my scatter gun

[@anthonygarofalo559]

Love the gun confidence classes promotions. Love fun safety talk on gun videos.

[@240sxdriver]

Please make a handguard and accessories for the Benelli M4!

[@whomagoose6897]

Surefire made an aluminum fore end that was great. The M-69 fit Remington 870 and 1100. Mossberg pump guns used the M-70 just needed the 7¼" action slide. Did not work with the 6¼” slide. The Benelli M-4 had the M-80 model. In limited production. Be on the lookout as it may be available any time. Now Surefire is trying to sell that plastic fore end with an integrated weapons light. I wish Surefire would start making their aluminum fore ends again. Mesa Tactical now has a new aluminum fore end replacement for the Benelli called the Truckee fore end. All aluminum, aircraft grade, with with M-lok mounting points. Mesa Tactical makes good stuff.

[@fin_jan]

Brief and to the point. Thanks!

[@toddbrackett4277]

Any plans for an SGA adapter kit for Winchester shotguns?

[@Yakwgo12]

Man the way u talk I can watch u for days

[@CG-ld6xg]

Can y'all make a stock that stores shotgun shells inside?

[@trevordelarosa3599]

Holy fuck that was a lot of great information really fast. Thank you magpul, I just bought an 870 and will be ordering the moe forend and sga stock in the next week or two. Y'all's products rock

[@markn4526]

For the Mossberg 590A1 Magpul Model, can you remove the sling ring that's between the receiver and the stock? It seems like it would be in the way, especially if you don't need it.

[@nikwanmurphy6442]

Where can I get Velcro side saddle ?

[@Arthurmd22]

Does the Velcro adhesive on the side of the shotgun damage the finish?

[@rusty_shakleford3395]

Will you guys be coming out with adapters or stocks and foregrips for the savage/Stevens 320 security 12g pump shotgun? I need purchased one and in all the research I did on this firearm there are a ton of ppl that are wanting and waiting and hoping that you guys at magpul make them available for the savage/Stevens 320 pump. Looking forward to your reply please. Thank you

[@noahjessen4356]

Will any of these parts fit on a maverick 88?!

[@jackrock1313]

Side sadle plus 55rd sling end of story.

[@eddiebkingjr3772]

I can not get an Molk accessory to fit the slots are to narrow any ideas would be helpful

[@weekenderwarriors1590]

I bought the MOE M-LOK Forend -Mossberg 590/590A1 for my Mossberg 590M (magazine version) but it doesn’t fit..

[@henryjiang9990]

Please make handguard for stoeger m3000!

[@victorsturdivant4731]

Does anyone know if there is upgrades available for the Stevens 380 12ga. Don't know that my son has ever fired it but he wants to buy something else with a 8-9 shell capacity.

[@moparmagnum928]

Does a Magpul SGA stock fit the mossberg 835 ?

[@elcomandante9m]

I want to upgrade my Benelli M4 with a magpul forend! Only problem, they don’t exist...yet! C’mon Magpul hear our voices. Thanks!

[@SwampNiggaVideos]

Get a Mosssberg homie

[@yz450fmonsta8]

Will the stock or the fore grip fit the gforce gf1???

[@jaysondamian1117]

What brand plus 1 tube extension is that and what accessory did you use to put a QD mount in front? Is that a 590

[@lordandpomeroy]

You forgot to mention the other stock clip style sling clamp “not sure what the actual name is”

[@projectlsxify]

Will the butt stock fit the mossberg 590s?

[@LIV2500]

930 furniture would be nice.

[@nomsolo9935]

Does Magpul sell universal mounts for small tactical flashlights like the Surefire G2X LE? I'd like to mount it to the MLOK on the MOE forend.

[@strappedtwich9437]

Will a SGA Stock fit a Moss 930?

[@travisgilliam1886]

Can anyone tell me why these won’t work on a super mag??

[@joemas8695]

does magpul make a forend for Stevens 320 security newer model (2019 and up)? I'm told they changed after 2019.

[@jessross6008]

I'd really like to get a SGA stock for my 590A1 but I haven't been able to find one anywhere AND even Magpul is out of them.

[@tom_olofsson]

Well done sir.

[@jonlanden1632]

Does the Magpul furniture fit on the Mossberg Maverick 88. Just picked up the 8-shot version for home defense.

[@whomagoose6897]

The Mossberg 88 has a pinned fore end. Cannot remove the action slide from the fore end. Best you can do is get a 7¼” Mossberg slide from Brownells or Mossberg and replace the all the internal and externals of the action slide. Which will increase the cost of your Maverick M-88. It would have been better just to have bought the more expensive Mossberg M-590. The Maverick M-88 was made to be able to sell a lower priced shotgun. Maybe you can sell the Maverick 88 and use that revenue to get a Mossberg 590. When you get a 590 the sky's the limit on modifications.

[@BobCummins]

The stock fits great. The for end will not.

[@erictalkington5674]

I got my shotgun already. Got a 12ga Coach Gun that is mean as shit lookin and I got a lead rifled slug in one hole and a mgnum load in the other. I'm all, set lol. No, but for real I love shotguns. I want my short Mossberg or Remington with the wood bird's head and wooden forearm a LOT.

[@MUCKLEECH]

Great stuff

[@MichaelLeopold1]

Helpful

[@jayjuggrnaut]

Magpul makes great products, however I don't believe their forend is as good as it could be. I owned it and ended up getting rid of it on ebay. The polymer is way too slick and not tactile enough. I know that some folks stipple their forends and/or add grip/skate tape, but I don't feel I should have to do that for something advertised as tactical. These forends should be stippled (fully, including the area around the mlok slots) before they leave the factory.

[@ryanwilson5936]

Use their mlok type 2 inserts. Grip for days.

[@jayjuggrnaut]

@@ryanwilson5936 Appreciate the info. My problem is that they should make it so I don't have to buy another widget to make it work as intended. Or include the inserts.

[@somedude1590]

@Magpul I bought a new shotgun but went with ATI i furniture instead because even after the second Grip plug you sent for my Magpul X22 backpacker stock , the grip plug still will not stay locked in place due to as I advised before a fatal error of the recess not being deep enough to accommodate the grip plug locking piece / clip on the plug itself. And there was no follow up from magpul . I felt like ya'll didn't really care . It is what it is I guess.

[@ClickKlack43]

Can confirm On 590A1 with SGA. That crossbar in the opposite stock plug was hitting even the shortest kit screw. I used a stainless pick over the stove to carefully melt down the plug crossbar and managed to get it clicked in. I can’t believe 3 years after your comment (they must be aware) they’re still selling parts with the same problem. Please fix this MagPul.

[@maxwellhall6606]

I want a pistol grip like gore grip

[@Joseywales414]

(The Green Beret Life org. Has a pretty good shotgun corse .

[@Pipojr_67]

What would recommend for a pistol grip Mossberg to replace with a Butt stock

[@mcdpews7928]

What brand is the shotgun card at 0:06?

[@whomagoose6897]

Esstac.

[@stevezoutman7533]

I recently bought a Magpul SGA stock and forend for my 870 Remington open the box and there was no Hardware to mount the stock.

[@jesus2299]

Your Magazine clamps suck it’s slides forward after you tighten the crap out of it

[@The1Marine1]

The horseshoe is upside down on your wall behind you.

[@acsoriacm]

Perhaps maybe you'd like to switch to decaf!

[@osawatomie]

Will this forend fit a Mossberg 500?