Maintaining my Pajero/Montero 4M40 - Installation of AVM hubs - Ep2

Installing AVM Hubs on Mitsubishi Pajero/Montero | Step-by-Step Guide
In this video, I'll show you how I installed AVM hubs on my Mitsubishi Pajero/Montero.
We'll go through all the necessary steps. Installing AVM hubs ensures that the axles do not spin when the 4x4 drive is not engaged, thereby extending the lifespan of the axles and joints. If you're thinking about upgrading your off-road vehicle, this guide will surely help you!
At the end, I also tested the AVM hubs, and everything works perfectly.
Don't forget to subscribe to the channel and click the bell for notifications on new videos!
Follow me on Instagram for more updates and behind-the-scenes moments: / pajero.land
Thank you for watching!

[@djordjeobradovic5707]

Koji je bio razlog i simptomi zasto ste promenili fabricke i stavili after market hubove i sta dobijate sa ovom nadogradnjom pozdrav odlican video 💪

[@PajeroLand]

@@djordjeobradovic5707 Pozdrav Dordje, hvala mnogo. Stavio sam ih iz razloga da se poluosovina i srce difrencijala ne okrece kada su ugasene vuce. Gledano na duze staze, sporije habanje, dugotrajnije koristenje i mozda ce se odraziti na potrosnju 1-2 L max, ali nisam siguran za potrosnju. Vidjeti cemo..

[@imazzius]

❤ nice job! Look easy, thanks. One question, Wich size of tires/rims you ride?

[@PajeroLand]

@@imazzius thanks mate! Tires are 33x13.5R15

[@rmnrvr1111]

The hub assembly must be done without grease, the removable part must be free to move and the grease will prevent it from working properly. This is also specified in the instructions! At most a drizzle of engine oil to prevent rust but definitely no grease 😉

[@PajeroLand]

@@rmnrvr1111 Yes I have read it also, but I investigated few forums and saw a lot of guys put the grease inside of them and they told it’s good for hubs.. do you have some bad experience with grease?

[@rmnrvr1111]

@@PajeroLand A very thin layer a bit like oil helps prevent rust but you don't really need to grease, no thickness. The grease takes up volume inside the assembly and blocks the mechanism that locks the universal joints, it also acts as glue when the lock has to be removed and returned in 4x2! 😉

[@PajeroLand]

@@rmnrvr1111 thanks for your answer

[@wildsidemontenegro]

I jos jedno pitanje dali ste sa njima dobili kisobran i cizme kada je ruzno vrijeme a morate izaci napolje da ih ukljucite😂😂😂😂😂😂

[@PajeroLand]

@@wildsidemontenegro paliti cu ih doma u garazi 😂

[@wildsidemontenegro]

Ja to ne palim nema potrebe ja svuda izadje samo na zdnji pogon

[@PajeroLand]

@@wildsidemontenegro dobro vi imate najbolje auto na svijet 🤣