MAJOR ISSUE + FIX ‼️ XK X450 VTOL & JJRC M02 VTOL - Review & Flights

[@jjones6336]

I appreciate your referral to a better servo at the end and all of the links for your favorites. Thumbs up!

[@NightFlyyer]

I still have my original servos, even after a crash into a tree, where I show how to fix the linkage to the motor with nylon control horns. The red 3g switch, I moved to the left side of the transmitter. Note, it is inoperative in multirotor mode and only works when in airplane mode. Good idea to change to metal gears in all models. Nice job.

[@jameshensley192]

So I bought the servos u linked ...do u have a video on how to install them ..new flyer

[@larrylancaster9131]

Thanks!

[@dronecamps]

Yw!

[@JamesKing2understandinglife]

Thank you so much Justin. I will order my metal servos today and fly more carefully than ever til they arrive. Plastic servos are a very weak link;

[@dronecamps]

So weak. Like glass. Was all I could think.

[@kelvinbloomfield1375]

that's the reason they sell the servos separately ,and where they make there money

[@grandmaster-grouch]

Justin! long time no see buddy, I want to let you know that i love love love that you stress test the shit out of most of your reviewed units. I think its important to mention the way you approach your analysis and recommendation / solution process is something i value from your channel. thank you sir. i hope you fair well during this lock down. the RC community have become a huge support system for this historical year. cheers.

[@dronecamps]

Hey! Thanks for the nice comment. It’s important for me to let people know if things will break the first flight. Also if it’s even worth their time. Loving RC more during this lock down. Hope you’re staying safe.

[@dagdernit572]

Ordering those metal servos now, thanks for the tip! Luckily I havent had a single crash with my xk x450 with about 10 packs ran, knock on wood lol. Think I will wait until the new servos arrive and fly some of my other planes to get the dust off =) Take care bro & keep it goin!

[@gdhall5311]

Good video Justin, I have the X450 and although I haven't crashed yet, I will be buying these servos. Thanks for the info.

[@dronecamps]

You’re welcome. Glad you didn’t crash yours. I managed to break two in one morning. 😖

[@Goludan]

Thanks a ton man, had been curious about these little VTOLs as often as they pop up on my Banggood. Great to finally get some honest info and see em in action.

[@thelaughingman79]

58 usd shipped right now on BG

[@davidstringer4681]

What a superb reviewer you are , you are correct about the servo problem , I had great fun with the x450 until yes it packed up because of the servos , so pleased that you gave info on where to get some decent servos , excellent channel you have and you are always so laid back about everything , 5 stars mate

[@jps99]

Thanks, I have an X450 in transit. I ordered the servos thanks to your video. I'm sure I'll need them.

[@5c0u53]

Still on my original servos/motors (purchased 11/2019)

[@caman1628]

wow thats amazing im going to order it soon!

[@Gamer1st1]

This is the second review of the XK I’ve seen where someone has it in 3D mode and hits the ground. It’s like the x350. It has a controlled mode and a 3D flight mode where the x350 motors reverse to allow stunts. The x450 reverses the entire motor housing rather than just changing the motors spin direction. My guess is the servo was stripped by trying to force it up after being in 3D mode and not disconnecting the battery first. In the other guys vid he crashed it 3 times in a row by being too low and in 3D. Motors pointed down every time. He couldn’t move them till he disconnected the battery every time. It’s also deceptive to show the motors and wires hanging out of the 450 like that happened in a crash, when you had partly disassembled it.

[@balsabreaker4272]

Thanks for the info.i had the same thing with my xk 450 , barely touched the ground and it stripped.

[@MaxCadillac]

Same here!

[@Christian_L.]

Can u install a bigger battery with more weight? What is possible? Bang good battery needs to long for delivery.

[@MrDLRu]

if it same voltage rating of motor

[@kelvinbloomfield1375]

nice onr Justin great info on the servos .shame the connections are not the same . but im gonna try it with the soldering

[@dronecamps]

Talk your time. Use some heat shrink you’ll be good. Match up the wire colors.

[@djwak59]

Thanks for the info. ! I have the 450 and mine did EXACTLY what you said would happen, AND on my first flight with it. ! Left motor got bent completely down, also broke the prop, the props are way too brittle. So I’m gonna pick me up a couple of these servos and try again. Many thanks !

[@JohnCuppi]

Wow I just got this and I feel like now if I crash it, it's all over. Really sad how few mention this, buyers should at least be made aware in reviews that the servos are plastic and aren't going to take too kindly to crashes. I better check all the screws on everything over on mine as well, I was going to anyway but now I'lll be exta diligent. Thanks for the heads up.

[@dronecamps]

You’re welcome. That winding noise you hear in the video is the stripped servo 😖

[@bodeksrc8007]

What battery are you using to power fpv camera? Does it have juice from plane battery? Or did you put second little 1s battery somwhere?

[@rainsilversplash4376]

Additionally, make sure to put Blue Lock-Tite on the prop nuts. I had a mostly successful maiden - Had one hard landing and broke a gimble. 1 drop of CA fixed it, BUT the prop nut was missing from the motor with the broken gimble. Perhaps the reason for the hard landing? I did order the metal gear servos.

[@MrPolymers]

Absolutely spot on Justin. I have the XK 450 and stripped a motor servo gear. I replaced with a metal servo. I will probably change out the other motor. I love this bird. In fact, I purchased a second one. This was a hit with my RC club indoor flights this Winter..

[@WeeblerZ18]

Thanks for the heads up!! Mine should be arriving this week? Ontario Canada. I have seen many vids on these birds..and nobody ever said boo.. about this issue??

[@dronecamps]

Yep. No one said anything. Shows how they want to sell you something.

[@PeterWinnett]

Hi Justin, I bought the metal servos and have installed the first one but I have a problem :) The servo is working in reverse to the other one. I don't understand this as there is only one way the servo can be installed. As the 3 wire hook up is power, ground and signal there is no way that is wrong... Any ideas ?? Regards, Pete

[@MrDLRu]

you have to go into servo and change internal wiring...wires other than the data, pos, neg coming out. or have to find reverse direction servos..funny this guy not explain that. i been at this since september this year and i know that already

[@Penpete1]

I reversed both servo arms 180deg so that they now face upwards so push rods are above engine nacelle. See if it helps in case of landing in long grass !

[@mfaisalgt1]

Is there any video on how to replace the servo on x450 plane

[@danialtun5431]

This two plane is which one is better and less damage

[@salvocutruneo5206]

Hi, in your opinion which is better the JJRC or the XK X450. Thank you

[@dhruvmalik6]

What’s the max battery you can put in?

[@earlyculyer4103]

The fpv camera link doesn't work I have no idea what these parts are but I'm dying to get some. Can you make a video if you haven't about these parts and how to assemble them and what all you need on a budget. Like I want to add some cameras to some RC airplanes just getting into the hobby already lost my first plane got away from me in the Wind. I mean I have some idea but not entirely sure but the little plugs are they're going to the board what antenna what goggles video transmitter can I use my phone? Or do I need to buy the goggles.

[@noutram1000]

Hope the manufacturer is watching and they switch those servos! Good review thx!!

[@dronecamps]

I hope so too

[@stevewaldrum5092]

I found that you can change the connection to motors to up instead of down and the servo arms go up as well. then servo arms can not hit ground any longer & life is much longer. you will need to be sure to reset servo arm angle, so it is straight up for drone mode, but goes straight for airplane mode. the best way to test is take props off, engage motors fully, then the servos can move motors. thank Steve

[@JamesKing2understandinglife]

The X 450 is very delicate and if you crash it roughly it will break. I own one. I would like to modifi mine before I break it.

[@dronecamps]

But the extra parts pack too. The articulating arm moving the motors up and down breaks too.

[@charlesfuson475]

Are the servos the only problems with the XK450 ?

[@peterberlin6395]

What's the difference between the X450 and Mo2? Tired comparing on Banggood but couldn't tell.

[@AbdulKadir-nm6mz]

I would like to know that is there any powerful battery has more power so it can last flying for a long time thanks

[@craigsmith5360]

Do you repair copter?

[@CaptainPhoton64]

You make some great points sir..metal servos would have been better...I have flown my XK X450 9 batteries and mostly in airplane mode...got enuff quads....kept it high and no problems so far...I bought it as a goof to just fly during my lunch at work...I am impressed with it for the money...I also fly RC Planes and this bird made me smile....

[@garbizwal]

I got these servos but they are reversed is there a trick to reverse them to make it work?

[@honorthybrim]

I have had my 4th one and this info is a big help...thank u

[@dronecamps]

You’re welcome Brim L

[@Penpete1]

Good advise, I had to replace one with stripped gears after landing after Prop got caught in bit of long grass.

[@99shadows66]

I found replacement metal gear servos with the correct JST mini connector plug on Amazon. Search GoolRC RC Airplane Front Motor Driving Servo with Metal Gear for WLtoys XK X450 Aircraft

[@kelvinbloomfield1375]

so send the link address ? because I cant find them .

[@batmojuice5704]

I had a similar experience with mine. I reluctantly ordered the original servos just because I wasn’t smart enough to figure out what upgrade to get. After this video, I ordered your suggested servo for when I crash it again. Which I will. Thanks so much for the tip. This is a very fun plane, but I wouldn’t say suitable for beginners in airplane mode.

[@dronecamps]

Hope it helps. I ordered mine too. Hope to make mine be more reliable now. 5g metal servos are hard to find!

[@hollycool2910]

@@dronecamps Do the Metal Gear servos have the same connector that the x450 needs?

[@HumbleHeartMinistry]

Thank you for the link to servo`s! I got the XK450 and just ordered the servo`s for it! Thank you!

[@AllAroundTube50]

How do you add a VTX and cam for FPV to the XK450? How do you wire it?

[@MrDLRu]

i'm new at this, but i believe you just plug camera into transmitter and power with separate battery. so have to make room in there for all that. the camera and trans he suggests is obsolete already and hard to find.

[@michaelfrentzen6109]

Can I bind it to Multimodul in Horus S12 with S-FHSS! I need the Mixer and adjustments for eachchannel. Who can help?

[@TheDronzDr]

which piece do I choose? 1 thru 6

[@karlreichert6181]

Maybe a stupid question, but I'm new to drones and I just bought the X450 and 2 of those PTK 7350 Metal Gear Servos you recommended. Now I'm in the process of putting them into the plane and I'm wondering, does it matter in which direction the arm is pointing or do I just need to more or less install it as the old (plastic) servo? And I guess it needs calibration, or how does the servo know which angles are the correct ones to have to propeller vertical or horizontal? Do I need to calibrate it manually and how do I do so? Thanks a lot for the great video!

[@MrDLRu]

receiver regulates servo and servo has center point that is known to servo electronics...the problem here is, and the experienced youtube guy doesn't even mention, is direction of servo. if the x450 has a reverse direction servo in it and those metal replacements are all forward direction servos...there is problem. you will have to disassemble the servo and rewire to reverse its direction..not easy task with micro servo. I find if funny that not a single person has posted on that point in 2yrs. My x450 is on the way with 5g servos so i find out and post it up.

[@amosshua]

If motor have some free movement , problem may be in the part that looks like servo arm connected to the motor holder.

[@GlockPointer]

That's a shame. I have the XK X520 and it has been exploded twice and still flying on original components.

[@artwin4983]

My x450 I have bought it used has the problem that the left motor goes up and down by itself, is that an servo issue or an failure of the receiver?

[@MrDLRu]

you'd have to test servo but at least parts are available for those. the jjrc m02 is gonzo at this point. votik servo's are gonzo also, but these are what I just ordered...they look same, same...4PCS PTK 7350 MG-D 5g Digital Servo Metal Gear for EPP E3P RC Model Truck Boat Racing Car Helicopter Airplane and Robot DIY...$26 shipped at aliexpress

[@TheATeam_2014]

Awesome video! Stupid question coming... How many servos do you need to purchase for the x450 model? :)

[@dronecamps]

Two

[@andrewmagro7703]

thanks for a great video you have a new sub, Hi im Andrew and have been flying rc planes for many many years and slowly getting into quads but now im wanting to try out FPV but not knowing what i need and what to buy and what i need at the start could you possibly steer me in the right direction of something i could fit to my Tundra as it comes with fpv cam mount this would be greatly appreciated cheers .

[@benxrocket1615]

Can I upgrade the motor size already replaced with metal zerbo's but want more speed

[@benxrocket1615]

Servos that's whatever the hell that was

[@cjdwh970]

I'm still figuring out how to add comments in KZbin. I agree, the XK X450 can have a demon like temperament and its fragile, not a good combo. BG is out of the servo you suggested, know of another servo? I had a few impressive flights in all modes before a final light hover landing in the grass caused both the front prop units to fold completely under and stick at 180 degrees of vertical takeoff setting, (upside-down) is it possessed ??? This stripped and burned up both front prop servos, it ended with a wining sound I couldn't stop. I guess that was the servo motors spinning to their hot hellish death, the servo case was even a little melted. No other damage. I'm also concerned about installing new XK servos with the correct setting for full function and aligning both exactly the same, I assume that is necessary along with an exorcism to cast out the demons. Can my X450 receive this transmission? Has anyone been killed by one of these things?

[@Mildruler66]

Did anyone show how to reverse one of these servos? New to this with a very unhappy son!

[@MaxCadillac]

Fkyea... Servos are the first thing that failed. One of them stripped so quickly it developed a race condition (spinning out of control) and heated up quickly. I ordered the servos and they are out of stock. Bummer!

[@sethgreenberg7725]

Hey my friend you can't land with props in plane mode

[@Blizofoz45]

Both motor naceles should have been shrouded completely in foam like the X520. Mounting a plastic shell to cover the servo arms going to the motors to shield them from impact might help more than just buying tougher servos. Airplane mode is death for both the X450 and M02...why I don't know because the X520 can be flown in airplane mode sooooo slow almost to a hover, even while turning. It feels like a RC boat floating on water instead of an aircraft. I would think either higher KV motors and/or triblade props would help it churn more air in airplane mode and keep it from stalling out.

[@kentlam9374]

I agreed. I am selling my X450. It is a poor design to use plastic servos to drive the motors mounted on plastic housing. I scared to fly in the airplane mode because it falls from the sky without any sign. As for the drone mode, it is too slow.

[@dronecamps]

Problem is guards would have to be durable plastic in the front and thin enough not to be ducts. Plus big enough to allow the tilt of the prop forward. This design has issues.

[@kentlam9374]

Anyone try to use tri-blades to solve the mid air stall problem.

[@beach-time]

Canards mounted on carbon fiber shafts through the nose just below the plain of the wings. Stops the nose stall and X450 becomes what it should alwarys have been

[@AMurder0fCrows]

@@beach-time pix? vid?

[@kentlam9374]

I had the same problem. The two motors turned 90 degree down and needed to replace both servos with the original ones. It is a shame that many youtubers did not mention that. Do you have any idea why the X450 suddenly crashed. I was flying drone mode, then, switched to airplane mode. 5 sec after, it fell from the sky.

[@dronecamps]

I had a similar problem with mine in airplane mode. It’s like the flight controller flips out for a second. As you saw in the video. It shouldn’t flip into the ground like that. - yeah other KZbinrs are going for that $$$ grab. This is an issue and should be mentioned to buyers.

[@hollycool2910]

The same thing happened to me, after that a servo broke, the question is, why do the motors turn down? Metal gear servos do not change anything, they may only last longer. I think it's a bug in flight control.

[@stormsy4078]

Did you you 9g servos to replace the 5g servos on the wings do you think it would be ok

[@MrDLRu]

go here for 5g metal servos, look the same as the VOTIK 7350....4PCS PTK 7350 MG-D 5g Digital Servo Metal Gear for EPP E3P RC Model Truck Boat Racing Car Helicopter Airplane and Robot DIY....$26 at aliexpress shipped.

[@stormsy4078]

@@MrDLRu thank you

[@MrDLRu]

@@stormsy4078 i'm waiting on x450 and servos so I don't know if one, both or either have to be reversed to work...can you post up if you find out before me...thanks

[@PineMartinAmerican]

Thanks.! A few hours ago, I ordered one . I am pretty much a beginner and disabled and retired. I don't have much disposable income. It would have been heart breaking for me for it to break. I am not motivated or familiar with repairs and they cost money. I have little to spare. I thought it might be fun to have something outdoors to do while social isolating. I cancelled my Amazon order after watch this video. I cannot thank you enough! What would you recommend for a beginner ?

[@samw2431]

a cheaper smaller drone so incase you break it there only like $15-$30

[@thelaughingman79]

look at the OMPhobby s720. cheap fast and has landing gear and the unique design to allow the wings and tail to break off like lego pieces in the event of a crash. its in a stunt plane configuration but also makes a better glider than the companies glider version. its a brushless 2s plane 718mm wing span which is the perfect back yard flyer size in my opinion.

[@EquinoxIsometric]

Hi, can i make someone question about model? Tnk

[@barriepresseien1535]

Hi Justin.I watch your videos all the time,but never had a fix tip for anything I flew,until now.I just recieved my X450 and haven't put it together yet.I will order the servos and install them before my first flight.All of the reviews mentioned broken propellers, so I purchased a few sets,but no mention of broken servos.Would you advise reinforcement of any particular area where the servos mount while I replace them at the same time?I only noticed you repairing the nose,and don't know if any damage occurred in the servo area.Thanks for the heads up, I'm tired of drone failures and thought this was a great way to get into r/c planes. Any tips on what I should purchase to convert to fpv would be appreciated,also.Thanks again for another informative video, I always enjoy watching them.If you can help,pm me if possible.

[@chrisdriver766]

Great video and Interesting advice. I have a XK450 and use in flight mode most of the time, no issues with a crash yet! The drone mode is ideal for getting it up in the air to where you want before flight mode and landing again in a tight space, or even back to your hand. I found that the best way to slow down quick is to flip to vertical node which stops it real fast and is great for avoiding a potential crash. A quick flip from vertical back to drone and you have control again, too long in vertical and it will get blown away if high up, just like a kite. If you want a cheaper battery then search for 1116166 from BG as I have found this battery fits well and lasts longer, only problem is you need to solder on your own XT30 as it comes with JST. Am also using Foxeer camera and backpack AKK vtx to FPV mine. Justin, I'd like to follow your advice and swap the servos for the metal ones, but not have soldered on servos before. Do you need a tool to calibrate the range? Also how do you know they are the correct way round? I know that you can reverse the direction via most regular Transmitter settings but this is a bespoke Tx. Would appreciate any more advice on how you fit them in and make sure they are good to go before committing to a flight. Thanks

[@dronecamps]

My parts are on the way. If I get it installed maybe I can do a video to show you guys how.

[@chrisdriver766]

@@dronecamps Ordered some servos as well, looking forward in anticipation! Thanks for the research into these parts.

[@MaxCadillac]

Would love to see that video of the new servos being installed. Especially in light of the comment about making sure the movement of the servo is the same as the original (rewiring a micro servo???). Thanks for the advice thus far!

[@-sickfast434]

Do they run serve savers like we did on the tenth scale truck/cars basically a clutch or spring loaded servo attachment that goes to the heim joint or tie rod

[@dronecamps]

No

[@angelofmusic477]

My experience with the X450 is both the frame and electronics are too fragile. It's not only the servos, but my main board just smoke after the 3rd flight for some unknown reason. Replacing the main board ,then encounter that the right motor could not synch with the left motor and would sometime stop spinning....suspect a faulty ESC or motor.

[@williamcoleman8372]

mine board smoked too. i put new one in but they don't spin. what should i do

[@angelofmusic477]

@@williamcoleman8372 check if all the wires to the main board are connected. It could be a faulty esc board

[@MrDLRu]

how hard to replace the board...sounds like esc bad...maybe swap motors to find out

[@angelofmusic477]

@@williamcoleman8372 I change the esc and it work for a while. Now the tail rotor don't work. This china made is junk and not worth buying.

[@scorpiodjs]

Hi Justin. I ordered & installed the metal servos you suggested. I found that the arms rotate the wrong way so I just opened the back & put them in the opposite connectors & now they spin the right way. Now my plane just spins round & round very fast. Any idea what I’ve done wrong. Any help would be appreciated. Thanks mate

[@MrDLRu]

you can't do it like that, must go into servo and rewire, not the wires that come out, ie, data, pos, neg, but other internal wires that tell it what direction to go.

[@ladolcettina]

Hi, thanks for this very useful review, I wanted to ask you, if the Jjrc M02 radio is compatible with wltoys X450 aircraft. Thanks in advance for your reply. Per favore ho bisogno di questa informazione! Grazie!

[@arkas6797]

Pay attention to the micro servo you recommend. I bought them but unfortunately they are too tight so they do not fasten firmly and the gear does not come out at the right height. When I take off the helicopter suddenly starts to rotate around its vertical axis. What could be wrong? Thanks.

[@dronecamps]

Sounds like their not seated right? Mine works fine. 👍🏻

[@hollycool2910]

The same thing happened to me, after that a servo broke, the question is, why do the motors turn down? Metal gear servos do not change anything, they may only last longer. I think it's a bug in flight control.

[@kelvinbloomfield1375]

nope flight controls fine justins right .the planes fine till you start changing modes in flight

[@richardlastra3102]

Buen día cual es el precio de cada uno

[@taurushipointenthusiast1306]

Now way cool, Great info, as I am doing homework to see which is "Best" your the only one with damage. I believe what ya went through, as far as other tubers and no damage they are not as aggressive with them. However if first time flyer or gift for kid What is NEEDED TO BE KNOWN definitely shown here.

[@theoztreecrasher2647]

We've got 4 of the X520 V-tols that are still flying after a year plus (some glue & tape added but everything else original) but we're not counting on a similar durability rating on the 4 X450s we've not long acquired! ;-) Fun toys though. Oh and the multi protocol boys have just about worked out the protocols for both.

[@kentlam9374]

So, it can be binded to my devo 10 or junper now. Where can I find the protocol?

[@brianroberts815]

I just ordered one of these. I paid $92 delivered. Gonna order a couple servos like you suggested. I generally, almost always take good care of my aircraft fleet. I have Fixed wing airplanes, over 40 Coaxial helicopter, two fixed pitch helps, and 50 plus quads, or drones as people prefer to call them. I have 8 or 9 FPV drones, a Syma X8c, ZLRC Beast Pro 2, aSG700D, a Cheerson CX30, and 2 Hubsan H5p7s, an A and a D series. Also the Hubsan H105D, and a Cheerson CX30. I like the FPV stuff. But fixed wing airplanes are not quite so cool. They're too fast. Quads, ya can just stop. O I thought an airplanes thi can pause in flight when want to. Mine should arrive in a few days. I'm gonna make a few mods. A pair of pine, plastic or coat hanger ' nerves bars in front of the props, if possible. I'll balance it. Maybe even a strip of thin basswood on the leading wing edge.

[@MrDLRu]

man, that good price on x450. the jjrc m02 can't be had at this point and most of the stuff he recommends is no more 2yrs later.

[@mariabednarczyk2201]

Do you know any replacement props? I hate to wait for them to ship from china, also the original are very brittle, I spend them really fast. I guess they have to be brittle, if they weren't my servos would already be stripped too. I also broke the engine mount, but I managed to design and 3D print a replacement before a new came from china. I can send the STL file if anyone is interested.

[@mastmalang70hk]

thanks for heads up

[@droneready8278]

Nice...was gonna get the MO2...but better get the beefed up servos too.🤟

[@MrDLRu]

did you find one?..they nowhere to be found now

[@mapleleaf5521]

I have 2 batteries and once plugged into wall the light stays red for maybe 5 minutes and then turns off so im stuck with 2 batteries that will not charge. Any pointers anybody?

[@scorpiodjs]

Why can’t you fit 9 gram servos into the x450

[@dronecamps]

Too big

[@scorpiodjs]

Drone Camps RC cheers mate. I’m new to the rc world 👍

[@rcfundyer5739]

Another great review very informative thanks bro

[@dagdernit572]

Hey Justin! Banggood sent me a control board instead these Pro-Tronic 7350 5g Servos. Even payed extra for fast shipping and they took a month to get here from the USA Warehouse, lol. Do you know anyone at Banggood that can fix this and send me the Servos? I have emailed them twice with order #,pics, and a detailed explanation with no response back from them... Thanks man!

[@renotimberwolf2139]

Just ordered spare parts ,thanks!

[@dronecamps]

Stock up! 🙏🏼👍🏻

[@dannypeto8734]

I guess i will have-to make me a V-Tol to maybe out of fiber glass !

[@PropsOff]

Lol, not looking durable out-of-box. When I was at the RMRC FPV Fest, there were some realy cool wings. Would a wing be more fun? Cool tech....👍🏻🍻👊🏻

[@paulhope3401]

You look very like Kimi Raikkonen in this video :D Anyone else ever told you that?

[@kanarimentos7056]

very good review

[@chorianopoulos2002]

Any idea what this aircraft does if it failsafes? For example if flying in airplane mode and loses signal? What does it do? Does it go to hover mode and land or just drop?

[@evangelistanunes6378]

Olá amigo perdi o meu drone xk450😢 consegue alguem que venda um mesmo usado? cumprimentos Nunes 😎👍

[@spanzer6179]

In the video you talk about 9g servos 9g being the standard? I just went to the website you supplied below and those servos are described as 5g. I'm new to drones, I don't quite understand that difference.

[@dronecamps]

5g is smaller. 5g is what fits this aircraft.

[@budrocket6702]

The red button only works when you're in plane mode it takes off the auto level Auto stabilization you'll be able to do flips and barrel rolls in other words once you push the red button push it again brings the auto level back

[@kelvinbloomfield1375]

there is still stabilization in plane mode just not on the red button .for the record lol

[@geraldwinder8506]

I'd love to have a VTOL. I'm going to order in the metal servos along with the unit

[@SkyGizmmo]

That you review and fly drive all types of

[@tennriverluver3534]

Thanks for posting this. I've considered one of these but my luck with XK has not been good. Think I'll just save my money and aggravation and not buy either of these.

[@jpbouchardon8411]

un GRAND MERCI

[@tybud3829]

I broke 2 motors in 2 flights and my crashes weren’t that bad

[@stevewaldrum5092]

You will need to check direction of movement of any new servos you change out. You will either need to rewire inside of servo to change direction or solder in an electronic servo reverser. Only one will need to be reversed. Check direction without being connected to motor, to keep from putting servo that is going wrong direction from being put in a bind.

[@MaxCadillac]

Ugh!

[@-sickfast434]

Neat rig

[@robertosellitto6481]

Ciao vorrei sapere dove posso trovare la telecamera da montare sul mio xk 450 ? Perche non riesco a trovarla.mi potete dare un consiglio?(marca e dove comprarla) GRAZIE MILLE.

[@mfaisalgt1]

Hi

[@edsmith334]

Disregard. - it’s another Oriental seller that doesn’t know it’s *ss from its elbow selling plastic as metal 😬