Make A Leather Can Sleeve | FREE PDF PATTERN!

[@davidcochran934]

Love your videos. Just getting started down this rabbit hole called leatherwork.

[@shawnlewis389]

Welcome to the addiction. Remember this: it's only money, who needs a 401k.

[@jeffmuth6504]

@@shawnlewis389 Lol... So true, I'm waiting for my next check to buy more stuff.

[@bodyhanger7137]

Thanks for the pattern. I sewed mine up, placed a full can inside the hit it with water from a spray bottle. I then allowed to dry with a book on top of the can. Turned out great and molded nicely to the bottom. Thank again mate...

[@vickyprince3686]

Best tutorial I’ve seen!! It was especially helpful to give the tools you used, for a novice like me!!

[@lemmfire]

Big thanks! Now we can make best christmas gifts ever 😀

[@JasonSikora1943]

Dustin, I've ordered quite a bit from your store. Always pleased with your product line. The end results are beautiful and they sell well. Will be buying more from you soon!

[@carolynsittler4929]

I like your pattern over several other patterns that I have come across.

[@jackblack8252]

Thank you Dustin, you were the first leather worker i found on KZbin & inspired me to give it a go. I really appreciate the time you take to produce your tutorials & sharing your craftsmanship. Wishing you a happy & prosperous 2019.

[@markolson7877]

Great video, easy to follow with your calm demeanor ~ nicely done, Bravo...Thank you for the pattern!!

[@compassleather]

Im a novice leather worker and I downloaded your pdf and followed along with this video and it was amazing. Thank you so much for the inspiration.

[@tomreed456]

I just made my first one. Thanks for the pattern! I was dreading trying to stitch the second side with my big hands and fingers. Great tip to start at the bottom! I also discovered that if you slightly pinch the sides together, you can stitch through both holes at once, and do all the work from the outside instead of working back to front (outside to inside). You just need to make sure you snug everything up after each stitch.

[@ROBTAT2]

Cool deal. Thank you. I just made mine with 4/5 oz horween black leather and red thread. Love it

[@cleathercrafts]

Cool project. Thanks for sharing- very generous of you to make them so accessible:)

[@johnsabarese7103]

Made myself one awesome template!!! I found that starting the stitching on the bottom of both sides as well as only going half way down the first side then starting the second side and stitching all the way from the bottom to the top then finishing the remaining half on the first side.

[@chrisapattee]

Confused

[@tyrellsmith8618]

Thank you for putting this on here Justin!

[@jennym.9099]

Awesome tutorial! Just bought this template from you. Can't wait to start my project. Thank you, Justin!

[@eiggem3]

Thanks! Your video inspired me to do this on my hydroflask :)

[@davidallred4266]

Thanks, I will be making these for birthdays!

[@eliasmellek6417]

It's wonderfulllll. Thank you so much....

[@vanessakitty8867]

I have bought your acrylic template. TY. Awesome pattern.

[@alvaroconejo452]

Thanks a lot for the pattern and video. Wish I could upload a picture of the first one I did with laser engraving, it turned out great

[@andreatthatsme]

Thank you Dustin🤗😊

[@byronwest9821]

Thank you for the template

[@mattr.3812]

Great video man! Very helpful and informative!

[@kboleather]

Thank you Dustin!

[@jcdht5931]

Thank you for the video and the template :)

[@berg6964]

Great video, thank you!

[@Certawin]

Nice lil project. Downloaded the pdf. And gonna make myself one. I'm curious about something on the stitching. On that intricate a stitch. When you do that, can you turn the camera to a better angle. To give a better view. :) Thanks a bunch for the nice tutorial and pattern.

[@MAKESUPPLYLEATHER]

Thanks for checking it out! Yes I did notice I was blocking the camera I thought it was up higher when filming. My bad!

[@PPMOCRG]

Thank you for the template!

[@kentison9143]

How about putting the leather around something the correct diameter and use rubber bands to hold it in place while starting the stitching?

[@Freeman-Dl70]

I'm wondering if wet forming the bottom, would alleviate the falling over when empty.

[@rinazeller4295]

Grateful for the free pattern but I could not follow the hand stitching part of the tutorial because your hands were in the way... Unfortunately mine didn't come out the same 😭😭

[@51watty]

For the corners of the bottom I used a 4.5mm round punch.

[@chrisapattee]

Does a sweaty can in the summer time cause the leather to change shape or expand when it absorbs the moisture?

[@nikkishandmadecustomcreati3404]

Wondering the same thing

[@lorenzog3842]

Do you guys make a template for slim cans?

[@FudgedDiceRoll]

What's your opinion on using an oil tanned leather for this project? It doesn't seem like the supplier linked above still carries the leather you're using in the project and the cuts they do have are far too pricy in relation to the average price this product sells for on competing Etsy shops.

[@MAKESUPPLYLEATHER]

Oil tanned is great for this project since its already more resistant to moisture. Would recommend!

[@shelbybendele4045]

Do you have a pattern for a taller and skinnier can? Like a truly can

[@JStokes331]

Hey, great video and great website. Thanks for the inspiration. I just made my first one and it’s a bit snug, I’ll have to make sure I cut to the outside of the template line next time but do you have any tips for stretching it ever so slightly? Thanks again

[@mrdobalina3451]

Does condensation from the drink end up in the bottom and come out the sides onto whatever it’s sitting on?

[@eltoxico2977]

How do you stop from getting wet on the outside?

[@patriotcam1776]

Will this work for a beer bottle?

[@chrisapattee]

At 19:57 you said that you have never tested burnishing with leather, what did you mean?

[@kellyandrews179]

I wish the camera work had more close up views without arm and hand blocking the views. I don't have a clue as to how to do that stitch.

[@R.L.U.]

18k views and 414 likes? Come on, I know 90% of you took the PDF! At least give a thumbs up!

[@cate4155]

I was going to follow you till you used the horse hide...tisk tisk tisk

[@bobnolen1339]

Where is the PDF file do download?

[@Archaeologiker]

In case you still need it, it's in the video description, just below the video. You have to expand that area.

[@SusanWragg]

i love the pattern but I got frustrated when I couldn't see what you were doing because your arm or hand obscured the view!

[@utahprepper8925]

Wouldn't it be cool if we could actually SEE the stitching while you are doing that step? Your camera placement needs some tweaking.

[@Thawatchai_Peak]

มองไม่เห็น

[@robertaigler3564]

The fact that his arm is covering the koozie the entire time he’s stitching is extremely frustrating

[@KikiBoutique-u8d]

La QWAHHH sweetie, LA QUAAHHH 😂 Kidding... Thank you for the excellent tutorial! kzbin.info/www/bejne/nHfUeZ-inrygjLs

[@hobbyoclock8066]

Thank you so much for inspiring me to make this one! I didn't have thick enough leather so I made a second one with insulation 🙂kzbin.info/www/bejne/fKnFo6t7jZyGhsk

[@ИванИванов-х9г2с]

Fack