In this UEFN Fortnite Creative Tutorial you'll learn how to make a skybox in Unreal Engine and UEFN for Fortnite Games.
Пікірлер: 203
@epik_robie17094 ай бұрын
So I followed the tutorial and I got the skybox to work, but using the "IS SKY" option made the skybox translucent and you could see everything behind it. Not sure what caused this, but I was able to get around it by turning off "IS SKY", keeping the other material settings the same and then turning off "Cast's Shadows" in the sphere mesh settings, as well as setting the Collison mesh to "no collision". If anyone else had this issue, hopefully this helps!
@SafetyAlwaysOff4 ай бұрын
thank you!!
@sadaqah_jarihh4 ай бұрын
Thank you
@mongrall9721Ай бұрын
thank you so much!!
@ismailkhizirov27305 ай бұрын
Post more videos bro please, you're literally the best uefn teacher out there
@OanSMM5 ай бұрын
This is one of the best tutos I've seen on UEFN, please do more!
@WarforgeXP5 ай бұрын
🙌
@WalterHWhite-zl6bs5 ай бұрын
Yes, so glad you’re back. I’m going through your learning verse videos right now
@WarforgeXP5 ай бұрын
🙌
@Dekmanlol5 ай бұрын
Great tutorial mate! Can't Wait for more!
@IEatSand228905 ай бұрын
I am currently far along on my first project and was wondering how to do this. Thank you for another great video. They help beginners like myself get our bearings. I started off being clueless, but now I'm not too far off from actually publishing a game with UEFN.
@WarforgeXP5 ай бұрын
Glad it was helpful!
@IEatSand228905 ай бұрын
@@WarforgeXP Is there any way to make a capture point spawn bots that push into the enemy base based off which team captures it?
@macks36585 ай бұрын
yay more tutorials thank you! your forging the path for us :)
@WarforgeXP5 ай бұрын
More to come!
@fxbiani5 ай бұрын
I’ve been needing this, this is huge
@EmptyTavernProductions5 ай бұрын
Actually just subscribed to you a couple hours ago because I recently got into mapmaking, but I thought you were done uploading, boy is this a treat!
@WarforgeXP5 ай бұрын
I’m back forever now
@prodev40125 ай бұрын
If Tim Sweeney said verse is the future of UE6 then we are gonna need you on the epic documentation team! Hope you become a big figure over the next few years thanks for coming back with some bangers
@WarforgeXP5 ай бұрын
Fingers crossed!
@tonybablony20414 ай бұрын
Never leave again, your tutorials are too clutch
@WarforgeXP4 ай бұрын
Lol
@ollybrown5 ай бұрын
Super helpful tutorial, thanks bro 👊
@WarforgeXP5 ай бұрын
Happy to help!
@Rossity5 ай бұрын
This is amazing! Thank you
@WarforgeXP5 ай бұрын
🙌
@wildsquirreltv5 ай бұрын
This changed all the view of my map, tysm!💙
@WarforgeXP5 ай бұрын
I'm glad!
@AtavismX5 ай бұрын
Great tutorial as always and A+ puppet work.
@WarforgeXP5 ай бұрын
🙌🙌
@StrohTime3 ай бұрын
Really great vid! Thank you
@ojcb67215 ай бұрын
The way you explain stuff reminds me of my awesome global history teacher from high school! Great tutorial!
@versatilfn5 ай бұрын
I don't know what to say, your tutorials are amazing, you're awesome!
@WarforgeXP5 ай бұрын
Wow, thanks!
@sashi69283 ай бұрын
Amazing, as always!
@NostalgiaFocus5 ай бұрын
Wow. Fantastic tutorial!
@WarforgeXP5 ай бұрын
Thank you! Cheers!
@HIGHCALIBERGAMING4 ай бұрын
You make it so easy to follow along thank you kind sir.
@OpsMan5 ай бұрын
Nice clear video, thank you
@WarforgeXP5 ай бұрын
🙌
@Koz645 ай бұрын
Great tutorial, thank u bro!
@WarforgeXP5 ай бұрын
Glad it was helpful!
@SeniorfritoOfficial5 ай бұрын
Excellent tutorial. Very similar steps I used in a prior project. One extra tip for those that like to go really big. Your sky might disappear at certain distances. For example if you go to the edge of your map, your entire sky might just disappear. This is the rendering distance of the mesh. You need to select the mesh and change the rendering distance in the details panel. Depending on how big your landscape is, you may need to make this a very high number. For my projects in the past, I've set my skyboxes to about 100k and that works.
@WarforgeXP5 ай бұрын
Yes this is correct!
@XraiFortnite4 ай бұрын
Where can I adjust the rendering distance?
@SeniorfritoOfficial4 ай бұрын
@@XraiFortnite With the sphere or box selected, scroll all the way down to the bottom in the details panel (default right side). The section you're looking for is LOD and the setting is Desired Max Draw Distance. You can also search for that setting by searching "Draw" in the details search bar.
@XraiFortnite4 ай бұрын
@@SeniorfritoOfficial Thank you very much ! It Works Now.
@RJ_10_105 ай бұрын
HES NOT DEAD!!!!
@WarforgeXP5 ай бұрын
I’m back forever
@babyfox2055 ай бұрын
Verse, I hate that language and I know Python, js, go, java 😅. Could you make a tutorial where a 3 dimensional array of floating rocks gets spawned and these rocks are switching positions with each other (by flying from point to point) ? I was unable to make it work because verse gets lost in attempt to run it (not me gets lost! The functions of what's available for us in uefn, seems can't do that) 😭
@pookienumnums5 ай бұрын
Awesome!! Great info and great presentation!!
@WarforgeXP5 ай бұрын
Glad you liked it!
@onyxgg42065 ай бұрын
Great tutorial
@vectflowFN5 ай бұрын
HE CAME BACK WHEN WE NEEDED HIM THE MOST 🐐
@WarforgeXP5 ай бұрын
👊
@Silquey5 ай бұрын
solo carrying the uefn community we appreciate u
@WarforgeXP5 ай бұрын
lol I’m a drop in the bucket
@SarahLuvs2game22 күн бұрын
Thank you for the amazing video/tutorial ,and showing skybox ai! The creativity of this and what it can produce is honestly such eye candy! I left a subscription and when I have free Time I am so watching your videos just to increase your watch time and support the channel further!
@klaus43615 ай бұрын
letsgooo, i love your tutorials bro😂
@WarforgeXP5 ай бұрын
Happy to hear that!
@jimmi_bpАй бұрын
the goat strikes again!
@silvernickles5 ай бұрын
You uploaded this at the literal perfect time.
@WarforgeXP5 ай бұрын
3:30 pm is the perfect time?
@silvernickles5 ай бұрын
@WarforgeXP Timezones, haha. I meant, in general, was trying to figure out how skyboxes worked. Thanks for the awesome tutorial, as always.
@guicromos5 ай бұрын
we missd u buddy. please, come back with the old frequency. you're awesome.
@kenny76365 ай бұрын
Thank you so much you’re the best teacher ❤❤❤❤
@WarforgeXP5 ай бұрын
Thank you! 😃
@KreciQ-FNC5 ай бұрын
Amazing tutorial🔥😎
@WarforgeXP5 ай бұрын
Thanks 🔥
@badllama12105 ай бұрын
Amazing!!!
@WarforgeXP5 ай бұрын
Thanks!!
@robbyface37075 ай бұрын
Coming in clutch 🙏
@WarforgeXP5 ай бұрын
🙌
@josecampelo5 ай бұрын
Seus tutoriais são demais, obrigado
@ademolatosin15285 ай бұрын
Was about to sleep, but watched this, jumped off my bed and now I'm testing this out
@azrhyga5 ай бұрын
Great!! Very good job!!
@WarforgeXP5 ай бұрын
Thanks a lot!
@azrhyga5 ай бұрын
You're more than welcome :D@@WarforgeXP
@andreideathy90605 ай бұрын
Great tutorial! I have a question is it possible to change the skybox in game in real time? Like if I use a button it will change to another skybox? Thank you
@virusbruh2 ай бұрын
very helpful video, i just have one question. is it possible to make a sphere with a skybox material that when shot at changes the skybox? i want multiple skyboxes and a way for the user to change them when they want
@chinonoob32195 ай бұрын
yeeeeeeeeeeeeees hes back on tutorials
@WarforgeXP5 ай бұрын
🙌
@pookienumnums5 ай бұрын
If anyone runs into the problem where their sphere disappears after you click for placement, you gotta hit ENTER. I was trying to just click to place then go up back to selection mode and it would vanish every time. After you click to set it down, you need to hit enter. It will then give you the XYZ Axis handles to move the placement and you can then jump back to selection mode or w/e you wish.
@padala233 ай бұрын
Do you know if there's a specific setting or quality that would make the HDR image not act in the manner you showed? For instance, one texture and material I made (using the Nvidia tool) refused to show itself from inside the sphere. The second texture and material I used did show, exactly as you showed in the video. All settings in the material were exactly the same. Thanks for the tutorials!!
@Fallen-Champ5 ай бұрын
Oh wow thanks for the links, I should be able to find some excellent skyboxes now, also excellent info on how it is all done, cheers. Do you know if there is a way to disable clouds moving on the default skybox?
@WarforgeXP5 ай бұрын
Use a day sequence device, enable clouds, and set amount to zero
@Fallen-Champ5 ай бұрын
@@WarforgeXPoh wow thank you for that honestly, it's so hard finding some info I find the building part very easy it's all the settings and devices that scramble my brain and bog me down for long spells, thanks again
@diegocerrimanna28735 ай бұрын
Fantastic video
@WarforgeXP5 ай бұрын
Thanks! 😃
@TCGSammler5 ай бұрын
Its not even working into Fortnite The Game its only working in UEFN
@mrbeest20465 ай бұрын
Great tutorial, it worked for the most part. But currently experiencing a major issue, my skybox shows in UEFN and looks fine with no problems, however when I start the game the skybox is not there at all in-game. Do you have any ideas or anything that would make the skybox actually visible in-game since I followed all the steps. Thanks.
@bayer4ik4 ай бұрын
the same
@Reynos062 ай бұрын
was answered above credit to OP " @SeniorfritoOfficial 2 months ago Excellent tutorial. Very similar steps I used in a prior project. One extra tip for those that like to go really big. Your sky might disappear at certain distances. For example if you go to the edge of your map, your entire sky might just disappear. This is the rendering distance of the mesh. You need to select the mesh and change the rendering distance in the details panel. Depending on how big your landscape is, you may need to make this a very high number. For my projects in the past, I've set my skyboxes to about 100k and that works.
@supreme71145 ай бұрын
HE'S BACK 🔥
@WarforgeXP5 ай бұрын
🔥
@briandavis64764 ай бұрын
Thx for this! Just curious…is there a way to give credit to others whose assets you used in an island? Didn’t know if there was an accepted convention for doing so.
@WarforgeXP4 ай бұрын
The Fortnite upload portal has an attributions section when you publish
@epik_robie17095 ай бұрын
This is unrelated but could you do a verse tutorial on the sleep function and using it for millisecond timing devices? I can’t find much info about it on the wiki
@WarforgeXP5 ай бұрын
Good idea
@Zalatoray5 ай бұрын
please please please make more tutorials, they are so good !!!1!!11
@WarforgeXP5 ай бұрын
On it
@Pricey_AU5 ай бұрын
Great video! Do you know how to remove the clouds that are on by default in UEFN and cast shadows even through the skybox? I have lost sleep over this.
@WarforgeXP5 ай бұрын
Add day sequence device. Turn on clouds. Turn opacity to zero
@Pricey_AU5 ай бұрын
@@WarforgeXP your are a wizard!
@Evrizzle5 ай бұрын
GGs I have an AMD, any substitute for that?
@WarforgeXP5 ай бұрын
Does the texture tool only work on Nvidia chipsets? I have no idea otherwise
@CreatorAPD2 ай бұрын
Is it possible to make a trigger change the skybox through each different skyboxes when its damaged
@asiangreg82093 ай бұрын
upper half is cut off after new uefn update, any work around?
@bluii3 ай бұрын
turn off is sky
@bayer4ik2 ай бұрын
@@bluii thank you, brother, you made my day
@crayder11003 ай бұрын
Why does my sphere disappear when i do it lol. As soon as I attach the material, that I created exactly as described using the exporter tools and that ai site, it just goes invisible. Looks perfectly fine in the material editor preview though.
@rMW_marlon5 ай бұрын
Hes backkk
@WarforgeXP5 ай бұрын
🙌
@XraiFortnite4 ай бұрын
Is there a way to change rendering distance for a barrier device? Because doesn't seem to be working with performance mode, sky is only rendered on the bottom part.
@KishirTTV26 күн бұрын
Hello! Thank you so much for your time you put into your videos really like no one else is doing the stuff you are teaching! However, I followed your video TO THE TEA and for some reason the floor is the sky but I do not see it around or above me....
@tomnowicki14084 ай бұрын
Very good work flow. Does epic allow to publish a map with Ai generated sky?
@Henism4 ай бұрын
where'd/how did you get the very first skybox you displayed, I need a cyberpunk background for my map and sketchfab doesnt have alot
@myster88994 ай бұрын
create it with the AI tool he uses
@realmakebelieve2 ай бұрын
When using a custom skybox I lose the default Sun light ,is there a way to use a custom skybox but keep the default sun /sky system?
@tequilaeater5 ай бұрын
Great tutorial! Is there a way to enable/disable the sphere so a user can choose which background they want to use?
@WarforgeXP5 ай бұрын
Sure. Rather, use a sequencer to set the material slot on the sphere
@tequilaeater5 ай бұрын
Finally got it, thanks a lot legend@@WarforgeXP
@mrbeest20465 ай бұрын
@@tequilaeater Hey, could you explain how to ''use a sequencer to set the material slot on the sphere''? I'm very lost for what he means by that
@tequilaeater5 ай бұрын
@@mrbeest2046 yeah so what i did, was change my mesh to a transparent material. Then created a cinematics level sequencer that replaced the transparent mesh with my skybox material. Then used that on a cinematic sequence device and connected it to a switch so it only turned on when I used the switch in game.
@chinonoob32194 ай бұрын
@@tequilaeater is there any tutorial for this? i cant make it work sadly
@bestofnl71064 ай бұрын
do u have a solution for when the skybox appears to be half ingame? In uefn itself its showing fully, but when I actually go ingame it shows only half. So the bottom of the skybox is shown but the upper part is just the default fortnite/uefn sky
@seco2nd-logic3 ай бұрын
same here 😮💨
@RL.KasawyАй бұрын
hi, i selected an 8k resolution on my skybox image but it looks so pixelated that it feels like it runs on a potato resolution. it doesnt give the 3D depth vibe as it should. any tips on what this could be?
@antosik7675 ай бұрын
I wish we were able to create animated skyboxes
@kyleusa12133 ай бұрын
Im having a problem where you can only see the sky well on dx12. You cant see it at all in performance mode and you can only kind of see it on dx 11 once you turn your effects setting up
@FishyFnn3 ай бұрын
When i drag the material onto my sphere 5:47 my sphere is just blank / invisible. Please help.
@dopexd68505 ай бұрын
after the new update today the skybox only fills the buttom part of the map and not the actual sky?
@Captain8ball5 ай бұрын
I know this is a dumb question, but can you guys give a tutorial for simple game modes like payload or capture point? I’ve already looked for tons of tutorials on the topic, but the problem is that they’re super out of date because Fortnite got rid of their channel system and replaced it with the system. so I can’t even complete of these tutorials because of the channels are removed. Also, it’s really weird how all of the Fortnite creative people disappeared for a couple months
@WarforgeXP5 ай бұрын
Any other game modes you would be interested in seeing a tutorial on?
@bestofnl71064 ай бұрын
Hello I really learned a lot from this tutorial, thanks! I have one question, I hope anyone knows the answer to this, When I load in the skybox in uefn the quality is very sharp, no pixels whatsoever, but when Iaunch session It seems a little bit pixelated, does anyone know how to fix this?
@PrincessfamousАй бұрын
I did the second way and I did everything correctly but my skybox is translucent ? I can see the Fortnite void through it and the sky doesn't go all the way around it's not 360. It stops halfway through almost like a half sphere but I created a sphere shape. I created 2 different skyboxes and I'm having this problem with both. Help? 😭
@snakeyfrog11535 ай бұрын
Niiceee
@WarforgeXP5 ай бұрын
🤙
@g0ujan5 ай бұрын
"failed to import static mesh" , when attempting to put it in UEFN after using the nvidea tool, any idea why
@Unaiii111Ай бұрын
Hello, I have done what was in the video but when I enter a game the skybox is not visible
@iamthekingofmountains654Ай бұрын
what do people with AMD do?
@paceve_2 ай бұрын
is there any way to eliminate watermark without subscribing to Blocklade Labs?
@myk_Master48563 ай бұрын
Can you please make a voting system with 4 or more loadouts? PLEASE
@BOOYYAAAHH4 ай бұрын
is it possible to remotely hide the skydome to use multiple skys?
@eetu8884 ай бұрын
Hey, I'm trying to do the same did u find a solution?
@iindgren4 ай бұрын
Small problem, when i drag the material to "element 0" the sphere goes invisible, any clues?
@RL.KasawyАй бұрын
1:07 its going too quick i cant keep up where do i get the 360 plane thing and how to i even get to that stage?
@TryhardLaboratory5 ай бұрын
I have a problem, the sky of the map is infront of the skybox, any idea how to resole that? My material is checked as a sky.
@WarforgeXP5 ай бұрын
Your mesh is disappearing because it’s so big. Make it slightly smaller or disable streaming for that mesh. Also make sure to set clouds to zero in a day sequencer device
@sadaqah_jarihh2 ай бұрын
The skybox is only showing in the water not higher any example??
@vladislavplotnikov1925 ай бұрын
I have a problem with this. This doesn't seem to work when playing in performance mode. You can only see the skybox when looking at the island from outside the skybox. Even then, it shows only where it intersects with the ground. As someone else said here in the comments, it does work if you disable "Is Sky" property, but then it doesn't look good. Any solution to make this work properly in performance mode? Tried using rectangles insted of sphere, same issue.
@vladislavplotnikov1925 ай бұрын
Same thing happens when you set Scalability to low in UEFN, even with SM6
@WarforgeXP5 ай бұрын
It’s not performance, it’s the render distance. You’ll need to adjust render distance on the mesh settings
@PixelatedC03 ай бұрын
What is the map code in the very beginning of the video
@dopexd68505 ай бұрын
for some reason i cant drag the texture in the nvidea editor
@user-nf6jn1hz9i5 ай бұрын
This worked incredibly for the past week, and then since the recent update, the skybox now only shows below the horizon.. :(
@LemoEt5 ай бұрын
Is it possible to use them as a barrier material? Or to use multiple and turn them off/on ?
@WarforgeXP5 ай бұрын
I think yes to all those questions
@LemoEt5 ай бұрын
@@WarforgeXP can you make a video for it if possible?
@LemoEt5 ай бұрын
I tried it, it works, but you know if they can be animated?
@user-di5di6oc6l4 ай бұрын
Why do you skip opening material graph? Now im stuck there and I need to look for it.......
@fortyfour66675 ай бұрын
pls, how to make a tycoon tutorial?
@WarforgeXP5 ай бұрын
Good idea
@kostagreenly-jones94783 ай бұрын
when i apply the skybox to the sphere at the end my sphere is clear and i can see through it with no custom sky i have tried everything any help ?
@mattbergman27883 ай бұрын
Unchecking "Is Sky" is what worked for me.
@luvcai3 ай бұрын
u are a legend thank u matt @@mattbergman2788
@anlu67692 ай бұрын
@@mattbergman2788 THX!!!, Also do you have any idea how can i make the lightning work?, it feels like the standard ligthining from the map is making the skybox image too bright.
@zackarylepage51145 ай бұрын
My texture is bugged, its reflcting on surfaces only outside of the skybox, and once inside the skybox, its not even reflecting at all. Can someone tell me what the problem is? i followed every texture steps. The sphere is also invisible, i can only see the reflections on my island when outside of the sphere. Edit: i unchecked is sky and it worked
@zackarylepage51145 ай бұрын
For some reason, i found it only happens when is sky is checked, i unchecked and it worked
@WarforgeXP5 ай бұрын
👊
@elias71384 ай бұрын
how can we do the tutorial without an nvidia GPU
@reshra55 ай бұрын
Where have you been?!?!?!?
@WarforgeXP5 ай бұрын
Working and building. But now I’m back and these tutorial videos now fit into a larger strategy
@tequilaeater5 ай бұрын
It works perfectly on PC but on console only the bottom half of the sphere is showing. Any ideas?
@WarforgeXP5 ай бұрын
It’s just distance rendering
@tequilaeater5 ай бұрын
Thanks for the response! Only half of the sphere isn't showing. I tried making the sphere smaller but no luck@@WarforgeXP
@f.fischer17773 ай бұрын
I need help!!!! The upper half of my skybox is cut off 😢😢😢😢😢
@Hangjust5 ай бұрын
HEEEESSSS BAAACCKKKKKKK 🎊🎊
@WarforgeXP5 ай бұрын
🙌
@user-qb7pm5fz6q5 ай бұрын
Pls make a tutorial how to make a forest eazy it takes too long