Make tires right after the race. [Make Ferrari 312T thoroughly] TAMIYA 1/12

I am only making tires and wheels.
I used SHOW UP's reAL Krome to paint the wheels.
It is a very good paint.
The tires are made in a way that I have no experience with.
reAL Krome　SHOW UP：
www.showup.jp/mcb.html
Ferrari 312T Tamiya model:
www.tamiya.com/japan/products...
Paint GSI Creos:
www.mr-hobby.com/ja/index.html
Paint Gaia Notes:
www.gaianotes.com
Clean Stick 2 GSI Creos:
www.mr-hobby.com/ja/product4/...
Black instant adhesive, electric leutor WAVE Corporation:
www.hobby-wave.com/products/o...
Magnet hiqparts:
www.hiqparts.com/product-list/83
BGM SoundCloud:
/ 19th-floor-bobby-richa...

[@P.h.i.l.65]

Its soooo fantastic model👏👏👏👏👍👍👍❣️❣️❣️

[@orangelion03]

Well done! Very clever. I'm in the process of figuring out a way to remove the raised lettering on the tires. I have the latest re-issue of the BT-44B to be built as a tribute to Reutemann. I found the remains of the same model I first built in 1980, and am practicing on those tires. What has worked best so far is fabricating spools to hold the tires then spin them on a hand drill (used this method for many years to remove mold seams and "wear" the treads). Using very fine sand paper, patiently, spin the tire, slowly remove the lettering. The finished surface is dull, but then I airbrush a coat of thinned white glue on the sidewalls to restore the sheen. The markings are then painted on using PE stencils. This method also works great if you are using decals for sidewalls as the glue helps them stick and eliminates silvering.

[@stomper12000]

Excellent model session video for us to get our mojo going on. Thanks for sharing.

[@12percent_on_the_desk]

Thanks for your comments. It is very encouraging.

[@samsingh8789]

Well done for 300 subs

[@johnbean7911]

Those tyres look amazing 👍

[@gobernor-zz9wc]

A great tip the glue with acriclic paint and the tire´s particles, ïm goin to use it on my models, thanks a lot smart guy from Japan!

[@12percent_on_the_desk]

Thank you for your comment. I hope this is helpful. If it can be made to look as if one side is decreasing, the atmosphere will be even better." You also had such a comment.

[@giusepperosato92]

Amazing job 🤙🏻👌🔥

[@samsingh8789]

Well done

[@davidaarons2488]

Great job, I've seen the tires in my youth at Indy car races, you are right on but a little thick, I would back off a little next time and also there are little heaver at contact patch edges. Hope this helps. brilliant idea to accomplish, Jesus Does Save

[@12percent_on_the_desk]

Thank you for your comment. I appreciate your advice.

[@shaunswesey5179]

I think Because of your Humility you think your work is not Good Enuff, I am not an expert By any means as well but to see the things you are trying to Replicate, is absolutely Fantastic. Oh that paint?? Could you shoot me the Link Please??? And liked and Subbed shaun

[@tw78911sc]

Drivers deliberately drive off line on cool down lap to add weight and ride height for post race inspection. Nice job

[@12percent_on_the_desk]

Thanks for your comments. Someone who knows a lot about motorsports will see this. I'm very happy.

[@user-of6hc3ne8d]

indycarのレース後はビクトリーレーンで結構長い間映り込むから参考になると思いますよ🎉レース中もピット作業後にレポーターが解説しながら使ったタイヤが良く映し出されます。 少し片減りし、溶けた感じもあるとより、リアルですね。レースをよく見ている人や触ってる人間的には壊れてダート近くに停車した感じには作れてます！しかし、手先が器用で羨ましい😂🎉

[@12percent_on_the_desk]

コメントをありがとうございます。 インディですか？！盲点でしたね。高解像で観れる環境を探してみます。 この頃のF1はカラーとモノクロの写真が混在してて、しかも35mmフィルムを引き伸ばしているので 細かく調べられないんですよ。想像で作っている部分も多々あるのですが、そこも含めて楽しんでいる次第です。

[@DonkeyEvo]

wow!!

[@daveheath3728]

Your modeling efforts and innovation are producing amazing results , well done , liked and subscribed . Could you send me the link to the reAL krome paint , I would really appreciate it . keep showing us your awsome builds , thanks ! 😊👍🏻

[@12percent_on_the_desk]

Thank you very much. I'll do my best.

[@user-mo6dt2zy9p]

すごい、私も真似してみたいです。最後の小石パラパラは無い方が良かったように思いましたがいかがでしょう？

[@12percent_on_the_desk]

どうなんでしょうね？1970年代のF1の写真ってレース後の写真がすごく少ないんですよね。あってもモノクロなんです。なので本当のところは分かりません。ただ、今でもピットロードって結構小石が浮いてるらしく、タイヤにくっつけてピットインしてくるそうです。とまぁ、理屈はこんなとこですが本音を言えばなんか違うことをやりたかったってだけですかね。

[@BGHse52]

[@coolruehle]

A little heavy on the texture. Maybe just re-glue the black rubber dust next time.

[@oldman9642]

Agreed. I thought the texture was perfect after the first coat was applied. The tire would have been changed LONG before reaching this state.

[@tmc28]

Exactly. I went to a lot of F1 races in the late 70's early 80's Stood right next to a 312 T2 at the LBGP after the race. First thing the drivers would do post race is slowly drive off line to pick up marbles, balled up rubber, on the tires to add weight for post race inspection. A few stones might be on the tires too, but mostly it's rubber. Excellent attention to detail! You have patience that I can only imagine. Have you built a Tyrrell P34? That's my favorite F1 car of all time.

[@sydrider6023]

I do not understand why Tamiya never decided to chrome the wheels, would have been much more realistic.

[@12percent_on_the_desk]

You are very observant. I am glad. The wheels in the kit were plated. I removed them myself. I wanted to modify them a little.

[@w203fuji]

サイドウオールの文字に比べてトレッドの潰れ方のオーバースケールに 違和感なのは私だけだろうか？

[@vg5536]

レース直後なら片減りしてないと不自然。まあレース経験者しか分からないけどね

[@pepejose4958]

Muy lindo todo arruinaste las ruedas