McLaren Honda MP4/6 Part2 【 TAMIYA 1/12 scale 】Peeling off the cowl paint. Underfloor processing.

No video

McLaren Honda MP4/6 Part2 【 TAMIYA 1/12 scale 】Peeling off the cowl paint. Underfloor processing.

Рет қаралды 181,006

Күн бұрын

McLaren Honda MP4/6 PART2 [ 1/12 scale TAMIYA ]
Peel off the paint on the cowl that failed.
Underfloor processing.
↓↓↓Click here for membership details↓↓↓
/ @car_model_channel
＊＊＊Instagram＊＊＊
www.instagram....
#ayrtonsenna
#mp4
#carplasticmodel

Пікірлер: 74

@horonam 9 ай бұрын

元々の塗装を剥がす所は日焼けした肌を剥いてるみたいで快感。何度も観てしまいます。

@Car_model_channel 9 ай бұрын

そうなんです、気持ちいいように剥けました👍

@user-fc9fk6wc8r 10 ай бұрын

参考にしたいですが、やっぱり参考にできるレベルではないです😂 今後も楽しみにしてます😊

@Car_model_channel 10 ай бұрын

自分の作り方がちょっと変わっているので、参考にしていただけるところが少ないかもしれません、すみません😆 それでも、楽しんでもらえるように完成に向けて頑張ります😄👍

@oscarcsar 10 ай бұрын

Another master piece is on the making. I've got two Tamiya 1/20 models I've build back in the 1990's but I build them "wrong" 😞. I mean, my building and painting technics were not as good as I wish so, I'm thinking seriously to rebuild them, I have new unbuilded models, but I want to keep them like that, brand new, so, maybe I'm gonna make the same you are doing, put them in an isopropyl alcohol bath and get/buy the decals again. One model is the Mansell's Lola T93 and the other one is Senna's Lotus 99T, plus the same 99T but radio control 1/10 car, Tamiya aswell, it needs repainting due to many years of "service". I have started and to sand off all the old paint is a pain 😅.

@Car_model_channel 10 ай бұрын

Senna's 99T is a very nice machine! I've made it several times too. Laura is also very cool! Mansell is also my favorite driver. Please take the time to rebuild! Thank you.😄👍

@kennethhancock2433 10 ай бұрын

When I was young one of the model magazine’s suggested using model airplane fuel to strip paint. I had just done a bad job on some big parts of a Tamiya 1/12 Porsche 910. What a mess. Glad you didn’t do that. 😂 Superb work. I enjoy every one.

@Car_model_channel 10 ай бұрын

It's dangerous to remove paint with airplane fuel.😂 Please continue to enjoy! Thank you!👍

@Youtubax 10 ай бұрын

I still have the 1/10 RC version Tamiya made back in the early 90’s. Not as detailed as yours though but still a beautiful model just to have on display!

@Car_model_channel 10 ай бұрын

Tamiya RC is also great! I also played with RC when I was young. Thank you!

@maccat1026 10 ай бұрын

Zippoオイルの空き缶を利用するってのがいいですねぇ！欠品パーツが多いということは匠の技を沢山見れる…楽しみですなぁ👍

@Car_model_channel 10 ай бұрын

Zippoの空き缶、捨てずにとっておいてよかったです😅 欠品パーツは、譲ってくださるという方が多く、甘えたいな～と思ったんですが、特定の方からだけ譲っていただくわけにもいかないな～と思い、ならば自分で作るという選択になりました。まぁ無いものは作る！といういつものやり方で頑張りたいと思います👍

@DuncanCunningham 10 ай бұрын

Perfect. just you, the car and the sounds between the two. Love it. I enjoy being on the journey with you. Thank you for sharing your work, your time, your creative solutions.

@Car_model_channel 10 ай бұрын

Wow! These are very happy words. I'll do my best to complete it, so please enjoy it. thank you!👍

@tonyalvarez486 10 ай бұрын

Looking forward to your ideas on how to overcome the challenges.

@Car_model_channel 10 ай бұрын

It's a kit with a lot of challenges, but I'll do my best to make it. Thank you!

@santaklaus2489 6 ай бұрын

Santa is very Happy 😻 Santa Like your videos. Like and comment for your great Channel 👏

@Car_model_channel 6 ай бұрын

Thank you very much!😃👍

@muskokamike127 10 ай бұрын

1:23 reminds me of me a couple of days after a good sunburn lol

@Car_model_channel 10 ай бұрын

It definitely looks like it after a sunburn! thank you!

@javieralmonte3589 10 ай бұрын

Para despintar es ideal líquido de frenos, se deja en la tina y se despinta al 100%

@Car_model_channel 10 ай бұрын

Hay varias formas de quitar la pintura. ¡gracias!

@nora-manbow 10 ай бұрын

まさかシャシーの真横ぶった切ってZippoの空き缶を使って接続とか…😅誰もが考え付かなかった事を初めて見たのでびっくりしました。もしかして本物のシャシーはああいう作りになっているんでしょうか？資料とか見たこと無いので解らない😂

@Car_model_channel 10 ай бұрын

そうなんです、本物のシャーシもこんな感じで分割されているんです。ただ強度が必要なので、ガッツリ加工してみました😆 完成した時に分割された展示も見て見たくて👍

@goforitpainting 10 ай бұрын

Awesome model.

@Car_model_channel 10 ай бұрын

Thank you so much!

@goforitpainting 10 ай бұрын

@@Car_model_channel I look forward to the sequel.

@Car_model_channel 10 ай бұрын

@@goforitpainting 　Thank you! It's currently under construction, so please wait a little longer until the next time.

@STRONGERJJ 10 ай бұрын

あー、ただの神がかった職人さんの所業って事ですね。なんか、日本人の器用さが海外の人にも受けているようですねもちろん、日本人の全員が、器用な訳では到底無い訳で、職人のみが持ち得る至高の技な訳ですが・・

@Car_model_channel 10 ай бұрын

ありがとうございます👍

@roly5250 10 ай бұрын

As allways, love your style making videos. And your passion for modelling. 😘👍👋

@Car_model_channel 10 ай бұрын

Thank you so much!👍

@Nutty... 10 ай бұрын

Its awesome to watch your talent and patience while building this project.

@Car_model_channel 10 ай бұрын

Thank you so much! I want to do my best until the end and complete it. Please look forward to.

@senna2399 10 ай бұрын

相変わらずやる事か凄いです😱 無い部品は作る？かっこいいです🤣 ワタクシには出来ません笑これからの動画もっと楽しみにしてます😀👍 頑張って下さい💪

@Car_model_channel 10 ай бұрын

今回もいろいろと迷子になりながら、自分なりに作ってみようと思います😅 いつものようにスローペースではありますが、楽しんでいただけるよう完成目指して頑張ります👍 ありがとうございます！

@r066tx 10 ай бұрын

Hi, I am trying to work out why you separated and re-joined the undertray. Is this a feature of the real car ?

@Car_model_channel 10 ай бұрын

Thank you! The undertray of the actual car is also divided. This time I tried to be bold.

@hanhenderikse 10 ай бұрын

Had the same question, according to the reaction it was just an option, a challenge, not really necessary?

@RT-dw3iz 10 ай бұрын

You are the best to do it👌

@Car_model_channel 10 ай бұрын

Thank you so much👍

@user-mu8uh2lp3g 10 ай бұрын

楽しみにしてます😊

@Car_model_channel 10 ай бұрын

楽しんでもいただけるよう、頑張ります😄👍

@mato93020 10 ай бұрын

ハンマーの叩き方が板金職人のよう。

@Car_model_channel 10 ай бұрын

ありがとうございます！

@gwil4234 3 ай бұрын

Nice job , Where do you bey that sanding paper ?

@Car_model_channel 3 ай бұрын

This sanding paper is my own work, pasted on a styrene board and cut.Thank you!

@modelrestorations 10 ай бұрын

Wonderful work! I tried using Alcohol once and it made the body brital. I now use Heavy Duty Dot 3 Brake fluid. I would like to go back to alcohol due to the cost. Is there a certain brand or concentration you recommend? The use of the Zippo case was outstanding. Thanks so much for sharing your work.

@Car_model_channel 10 ай бұрын

Thank you! I tried using isopropylene alcohol for the first time, but it had no effect on the body. Concentration is 99.9%.

@modelrestorations 9 ай бұрын

Ok, ill try it again with that concentration. Thank you!

@garydeandeery 7 ай бұрын

Do you know the screw size that fits the body to the base? I’m redoing mine now Iv had 10 years

@Car_model_channel 7 ай бұрын

I don't know the exact size of the screw. I use what I have as I see fit. Thank you!

@user-gj6py1zt6m 7 ай бұрын

すみませんサムネすいそうに漬けてる様で何してるんだろうと思って見に来た😮 TAMIYAにも1/12てあるんですね

@Car_model_channel 7 ай бұрын

そうなんです、TAMIYAにも1/12あるんですよ～！といってももう30年ぐらい前のキットなんですけどね😅 コメントありがとうございます！

@TheUncleRuckus 10 ай бұрын

Really looking forward to this build!! 👍👍 I wish Tamiya would've supplied Scale Hardware with this model instead of Phillips Head screws, they just don't look scale.

@Car_model_channel 10 ай бұрын

Well, Phillips screws don't look very nice, do they? But I guess I'll just have to endure this. I will do my best to complete it!👍

@jeremysnow3030 3 ай бұрын

ペイントを除去するためにどのような製品/化学物質を使用しましたか?ありがとうございます😊

@Car_model_channel 3 ай бұрын

塗装を剥がすのに使った液体はイソプロピルアルコールです。ありがとう！ The liquid I used to remove the paint was isopropyl alcohol. Thank you!😄👍

@Hemai-u9q Ай бұрын

Why cut the under floor into two parts?

@Car_model_channel Ай бұрын

The actual car is like that too, so I decided to give it a try.😄

@sin7984 10 ай бұрын

前のオーナーさん　ちゃんとサフ吹いてますね

@Car_model_channel 10 ай бұрын

そうなんですよ、ちゃんとサフ吹いてるし塗膜も結構厚めでした！バリのある所だけサンドペーパーがけしてあり、そこだけは剥がれにくかったです。シンさんおススメのIPA,これは使えますね～👍　ありがとうございます！

@00doude09 10 ай бұрын

塗膜を剥がしたい時、以前はラッカーシンナー溶剤を容器に入れてその中にボディをダイブさせたましたがやはり大量に溶剤を使うし臭うしで精神的にキツかったですが IPAだとあっさり塗膜が剥がれるのは助かります。いつ見ても手際のよさに関心します☆ 先は長いでしょうが陰ながら応援しております。頑張って下さい(*´ω｀*) いずれ自分も1/12F1に挑戦しようと思います(*´ω｀*)

@Car_model_channel 10 ай бұрын

IPA、始めて使ってみましたが、なかなか優秀ですよね！今まではヤスリがけでどうにかしていたけど、今回は大物なのでチャレンジしてみました（笑）完成はいつになることやらですが、途中でサクッと作れるマシンを作ったりしながら頑張りますｖどうか気長にお付き合いください。