Make YOUR AUDIO Sound PROFESSIONAL Using FAIRLIGHT in DaVinci Resolve 18 | Part 1 - Levels & EQ

[@JasonYadlovski]

📣 Check out Part 2 in the series - COMPRESSION! kzbin.info/www/bejne/jIOugKN7gaedbNk

[@askalz1]

already watching

[@TheCreatorGreen]

This is the best EQ video I've seen. I've watched a lot and never really understood what they were talking about. I love how you exaggerated things to really show what you were talking about.

[@JasonYadlovski]

Thanks! Doing my best to make things simple and easy to understand, I appreciate you watching!

[@smudgetheblurb]

My audio went from sounding terrible to sounding like I have a professional audio setup! Thank you for this tutorial

[@JasonYadlovski]

Awesome, video mission accomplished! 😁👍

[@KarlRock]

I vlog outdoors mostly, so I can't do this much EQ because the audio isn't clean enough. But I definitely do a high-pass filter at 100-120hz to get rid of traffic rumble and a 3-4dB wide q boost at 1.5khz to increase vocal presence a little. Along with compression to level my voice. Thanks for the video!

[@BobDobalena]

Find anyway to remove the sound of breathing ;). This is my struggle now.

[@JasonYadlovski]

If you have the studio version, voice isolation would probably do the trick.

[@ShoeGod]

This was super helpful! I rarely touch my audio because I have no idea what I'm doing. Thank you for this 🙏

[@JasonYadlovski]

You're welcome! Audio is super important and no so hard once you get the hang of it. 😜 I've got lots of audio videos if you need help. 😁

[@brandonewoldt]

Thank you so much for this video, I just switched over to DaVinci, and was ripping my hair out audio wise 😅 A very simple and thorough tutorial 👏😃 On to part two!

[@JasonYadlovski]

You’re welcome, glad it was helpful!

[@postbreak_]

Holy Jesus. I’m currently with a clip that has a truly awful microphone, one similar to what you’d hear in 2009 in those CS lobby, and just in a dozen of minutes, thanks to you, it became so much better, it’s amazing almost frightening!

[@JasonYadlovski]

Aweseome! All audio can benefit from a little audio editing. 😜

[@LightWays]

Wow, excellent video!! I was adjusting in davinci right along with you and it made a bigger difference in my video. Thanks!!

[@JasonYadlovski]

Awesome, glad the video was helpful, thanks so much for watching!

[@perfect12386]

You are epic. I'm at the very beginning of learning video after being a photographer for over a decade. I do a lot of volunteering with Christian charities, but have been paid for my first gig recently. They basically donated a microphone which will enable me to help so many other people. This video has really helped me get the best out of that microphone. Thank you.

[@JasonYadlovski]

Awesome, that's great! Glad my video was helpful. I volunteer a lot at my church running live sound for the band and services as well as helping with all the video stuff we do. It's a lot of fun. Best of luck on your work!

[@3dchick]

I bought a lifetime membership to Audiio a couple of years ago, and I LOVE it. One of the best purchases I've ever made. 😄

[@JasonYadlovski]

They’ve got tons of great stuff!

[@followmemove]

first time videoing a panel in a big room with a lot of people talking. afterwards i learned that the quality is not that wow. a lot of buzzing and this really helped alot to make it better! thanks!

[@JasonYadlovski]

Great!

[@lordhexfuzz]

I just started making KZbin videos after wanting to for more than a decade. My first video sounded so bad and even with a bad mic this helped upgrade my audio quality so much. I was surprised how much it actually helped. 😱

[@JasonYadlovski]

Yeah man congrats on starting the KZbin channel and making your first video. Everyone’s video can use a little bit audio work, and only takes a little bit to make a big difference. Thanks for checking out the video, best of luck on your channel.

[@lordhexfuzz]

@@JasonYadlovski Thank you!

[@LegendaryCMD]

really good, easy to follow and enjoyable. I liked how you broke down different frequency ranges rather than just sweeping through the whole thing. that was helpful for me, thank you

[@JasonYadlovski]

Awesome, thank you!

[@elmafudd9703]

Thankyou for your time this is exactly what I require. Yes my voice sounds a little nasal. It needs sorting. Why is it that almost know one likes the sound of their voice.

[@JasonYadlovski]

You're welcome! I think we don't like our voice because we are used to hearing what it sound like in our head and when we see a video of it, it sound different that what we hear. I've mad so many videos through my life, my voice sounds the same, haha.

[@LeftyBurns]

Thanks Jason! Your videos are incredibly useful and informative!

[@JasonYadlovski]

Thanks so much, Ethan, I appreciate your support! I’m glad you found the videos helpful. 😁👍

[@RudyVisuals]

Thanks man. All your videos on Resolve are SUPER HELPFUL!

[@JasonYadlovski]

You’re welcome! Thanks for watching!

[@grojuana]

I just gotta say anytime I youtube search a davinci question and im searching through trying to figure out what video to watch. I see a Jason video, I click because i know it's not gonna waste my time. Thanks Jason for all your work. I haven't even watched this video yet, but I wanna leave a comment now, because by the time i'm done with the video i know i'm gonna shoot off right to my project (or part 2) with all the info i need.

[@JasonYadlovski]

Thanks! I appreciate you watching!

[@RusticSkills]

WOWEE I am so impressed how these equalizer tweaks make all the difference! I am recording an audiobook and love using Davinci Resolve for audio and video, so glad I found this video, my recordings sound so much more professional. Cheers and sub to you!

[@JasonYadlovski]

Awesome! You’re welcome! Best of luck on the book! 😁👍

[@callieblossomASMR]

THANKYOUU! helped so much

[@JasonYadlovski]

You're welcome!

[@whyitsfun]

I'm, working on my first video as we speak, learning Davinci properly for the first time, and this was a massive help. Clear, concise, easy to follow. Thanks!

[@JasonYadlovski]

You’re welcome!

[@potionofknowledge]

Best video series to quickly jumpstart your dialogue game on youtube! Thank you so much for helping us out with these tutorials. 🙏

[@JasonYadlovski]

Thanks!

[@Kopicos]

Your attitude and speaking style is amazing 😍 love from India❤❤❤

[@JasonYadlovski]

Thanks! I appreciate your kind words!

[@Kopicos]

❤❤@@JasonYadlovski

[@HopelessCT]

This video is great i appreciate the sections being labled :)

[@JasonYadlovski]

Glad it was helpful!

[@guidrysolomonadvising9770]

I would love to see an update to this tutorial now that we have Voice Isolation, to see how that might impact your workflow. Thanks!

[@oakiewoodsman]

very helpful information. Thank you!

[@JasonYadlovski]

You're welcome! Thank you for watching!

[@oakiewoodsman]

thank you for taking the time to make such helpful content! @@JasonYadlovski

[@ScottioArnold]

Love your work bro! Great video! I'm gaining a lot of knowledge from your tutorials...thanks bro!

[@JasonYadlovski]

Awesome, thank you!

[@JANAHITHATV]

thankyou...very good suggestions, so far i have not yet checked the audio level

[@JasonYadlovski]

You’re welcome! Levels are the 1st thing to check and set. Then move on to sweetening it. 😜

[@VAsHachiRoku]

Love the easy tutorials, but any chance can expand to more “real” world editing scenarios? Example I’ve read that if you have background music to make the dialogue stand out should change some of the bands while talking over music. Be great to see how dialog impacts other types of audio tracks and how they both need to be adjusted and sweetened together!

[@JasonYadlovski]

And exactly what you’re talking about, I actually already have a video on it. Check out this video or I talk about what frequencies to cut below your talking tracks. kzbin.info/www/bejne/qWSwiZRjrb6Shqs

[@BMILTV]

Great tutorial ….I understand now… hopefully ur got one on dynamics

[@JasonYadlovski]

Thanks! Check out part two for info on dynamics, there’s a link in the pin comment. 😁

[@OnTheSamePageTogether]

These tips are next level!! I have a few of your videos that I watch each time I get to the audio editing for my videos and this one is now added to that list!

[@JasonYadlovski]

Awesome! Glad my videos are helpful! 👍😁

[@MisaelRodriguez]

This video was super helpful. Can you make a video on multi cam audio workflow?? I always end up with a ton of tracks that I then need to export to my audio person to sweeten.

[@JasonYadlovski]

Thanks! I'll see about making a multicam audio workflow video. I've actually got to make an updated multicam video in general. You do have the option to switch audio tracks with your multcam angle cuts or you can keep it on a single audio track while making video only angle cuts/changes. I do talk about that in my old multcam video.

[@MisaelRodriguez]

@@JasonYadlovski Yep, I remember that. I think where I have the issue is when Resolve turns a track into Adaptive (not sure what that means) and when I go to export for an audio person to cleanup...I have to duplicate the audio track and change the 'cam' manually.

[@theunknown21329]

Helped a lot thanks! I feel like a sound wizard.

[@JasonYadlovski]

Nice! 😁👍

[@Mr.Zen_73]

Amazing I could hear the difference in all the changes you made to the audio. Looking forward to playing with my audio in resolve too

[@JasonYadlovski]

Cool, thanks! Resolve can do a great job with audio work. 😁

[@Wren_Plays]

your tutorials have been such a huge help to me. thank you

[@JasonYadlovski]

Happy to hear that! Thank you so much for watching!

[@olgadekell]

*HAPPY BIRTHDAY !!!* 🥳🎈🎂

[@JasonYadlovski]

Thank you!

[@fresco717]

This video was very informative. I do have a question, what do you do when the audio is only coming out of one speaker? How can I adjust that?

[@JasonYadlovski]

In that case, I'd make the track with that audio a mono track. Then it will play audio to both right and left channels the same.

[@jonicolton]

jason… appreciate ur content. you’re an educational asset to me. is there a workflow (i.e. order of operations) for fairlight? for example, like resolve’s “image processing order of operations" for color? thx again, colton 🤟🏼

[@JasonYadlovski]

Thanks! Glad you find my stuff helpful! Yes, here's the order of operations for dialogue audio, here's what I like to do and recommend: Set proper levels first, next work with EQ, then dynamics - Compression, etc., then effects such as a multi band compressor, de-esser, etc. Also make sure you change the order in the mixer to be EQ, DY, FX. Once your dialogue is set, then I add music and sfx and start to mix it all together.

[@jonicolton]

@@JasonYadlovski appreciate your prompt response. thx jason! 🤟🏼

[@arildthingvoll5967]

Amazing video! Very usefull!

[@JasonYadlovski]

Glad to hear that!

[@RobertMacCready]

Jason, very informative video. Do you have a solution for wind noise? Got a clip that has wind noise in it (my mistake) and I would have to drive over 2 hours to redo it. Is it possible to clean up the wind? Thanks again. Great info.

[@JasonYadlovski]

Hi! For wind noise, I'd try using Voice Isolation if you have the Studio version of Resolve or I'd use the Waves Clarity VX plugin. Either should do a good job at removing wind noise.

[@aisniper-wp2rl]

TY, Great vids, Could you make a video on removing breath sounds?

[@JasonYadlovski]

Thanks! A great way to remove breaths is to use a gate or expander. I've got videos on those.

[@IanConnel]

Thanks for so many helpful tutorials Jason 😊

[@JasonYadlovski]

You’re welcome, glad you’re finding them helpful! Thanks so much for watching!

[@leotexas3485]

This is such great information! I always thought I was stuck with the sound quality of my cheap mics! 😄

[@JasonYadlovski]

You’re welcome! You can even make cheap makes sound good with a little bit of knowledge and some tweaking. 😜👍😁

[@2GoRoam]

Jason, thank you so much for this man.... Working on our latest video, we didn't have the best mic setup at the beach and I thought all was lost, but you just recovered our audio with this video. Can't really put a price on what this video has done for me! Off to see the Compression video now! 🙂 Cheers Neil

[@JasonYadlovski]

Awesome, you’re welcome Neil! Happy to hear you found the video helpful and it helps shave your footage, that’s great! 😁👍

[@meisam3dfoxh467]

Best tutorial about eq

[@JasonYadlovski]

Thanks! That’s a quick version, 😜 I have a whole in-depth crash course if you’re interested too. 😁👍 thank you for watching!

[@VictorVedmich]

Question: could you please make a video how to edit video-podcast with 3+ ppl. Mute sections when one person is speaking and other edit tips and tricks to edit audio on Davinci

[@JasonYadlovski]

Hi! I've got lots of videos on how to edit your dialogue that would probably be helpful - check out my channel. If you've got 3 people using 3 different mics, I'd put their audio in their own tracks, then use a gate to help cut out the voice of the 2 people that are not near a particular microphone. This would eliminate the need to for you to mute parts or keyframe any audio. It would work 'automatically'. Hope this helps!

[@VictorVedmich]

@@JasonYadlovski huge thanks for your answer. One small question: how quickly select and mute section of track? For example, one person speaking and I want to select and mute other tracks.

[@JasonYadlovski]

You would have to key frame the part you want to mute or just make a cut on the clips you want to mute and drop the volume down in between your two cuts. It’s pretty quick but if you have to do that a lot of times across the whole video, you’re going to spend a lot of time doing it.

[@manfromthemist1958]

Hi Jason, could you please do a video on setting levels in recorders, I have a Tascam 60D and 70D and cannot get the levels above -18 without hugh (hiss) noise creeping in. your help would be greatly appreciated many thanks for a great video Barry

[@JasonYadlovski]

What microphone are you using? You have the tascam attached to a canon 60D and 70D?

[@manfromthemist1958]

@@JasonYadlovski Hi Jason, thanks for getting back, I use a Travor wireless lav mic for when i'm in the garage but i also use a Rode video mic when i'm in my little office(wired) The tascom's I'm using is the 60D mk2 and a 70D audio recorders

[@WillGibbons]

Fantastically helpufl!

[@JasonYadlovski]

😁👍

[@questswithkyla]

Thank you Jason!

[@JasonYadlovski]

You're welcome!

[@videoyoplait]

This video saved my bacon. Managed to improve the audio recorded from my camera...stupidly forgot my mic. Thanks!

[@JasonYadlovski]

You’re welcome! Glad it was helpful and you were able to save your video!

[@Adonis-Giantomidis]

Thank you for this video Jason! This was very helpful! Do you recommend turning off/on the lowpass filter in camera? I have the Rode video mic pro + and have it set at -10db. Thank you in advance!

[@JasonYadlovski]

I do not turn on a low or high pass filter on the mic or camera unless it’s really needed because you can always do that in post. But if you do it in camera you can’t undo it in post.

[@GaryCunninghamyouareenough]

This was so helpful man (I look forward to more in this series 🤟)...thank you as always sir. And, of course...HAPPY BIRTHDAY!! 🎉🎁

[@JasonYadlovski]

Thanks so much Gary! 😁👍🎂

[@jackfisher7274]

Nice... thank you. I'm new to DR, used to premiere pro, but trying to learn DR...

[@JasonYadlovski]

Awesome, welcome! I’ve got lots of videos to help you along the way and there’s a lot of other great creators here on KZbin that can help you as well. 😁👍

[@jackfisher7274]

@@JasonYadlovski Thank u!

[@luucamNY]

ive been using lavalier mics more from change in boom mics for boom mics they never really needed too much EQ this helped my Lav Mics sound so more full this is a life saver i saved the EQ as my lav mic preset lol

[@JasonYadlovski]

Nice! Lav mics are notorious for needing EQ....sometimes lots of it. 😜

[@francoisvandermerwe3811]

Thank you very much for this Video. It was easy to follow, allowed me to understand what I am doing and why I am doing it and it was awesome to watch even for a beginner.

[@JasonYadlovski]

You’re welcome! I’m glad you found the video helpful, thanks so much for watching it and leaving a comment! 😁👍

[@ajmhobby]

Happy belated Birthday! 🥳 🎁🎈🎂🎊🎉

[@JasonYadlovski]

Thank you!

[@JonGibbsPhotography]

Great videos Jason (pt 1 and 2). Really helpful and explained simply and clearly. Thank you😀

[@JasonYadlovski]

Thank Jon!

[@CrimeTVro]

THX man ! You are straight to the point, this was very helpful !!!

[@JasonYadlovski]

You’re welcome!

[@CrimeTVro]

@@JasonYadlovski Here is the last clip with the sound edited based on your settings, I'm talking in the first seconds: kzbin.info/www/bejne/opmcXmyMjbykbqs

[@Poke_DNA]

Happy Belated Birthday! Can you do a video on Da Vinci Resolve Bluetooth Headphone Connectivity Issues? If you could you would be a LEGEND. I have problems with it all the time, one of the many being I can't connect my headphones to my computer after resolve is open. I then have to close it and re-open it. I also sometimes have to open and close resolve 3 times just to get the audio to play. Yes, I am using my setting preferences and selecting the correct audio output device :)! Thanks!

[@JasonYadlovski]

Thank you! The best bet for Bluetooth or wired headphones is to make sure that you set the headphones as the output device before opening Resolve. Then once you open Resolve, you can double check the Preferences to make sure the device you want is selected as the output device. Many times if you try to do it after Resolve is open, it doesn't work out well. This applies for BT or regular headphones/speakers.

[@Poke_DNA]

@@JasonYadlovski Thanks for the advice! I didn't know if there was a simple trick to get around it. It can be very frustrating sometimes.

[@EricToolin]

Kicked ass thank you!

[@JasonYadlovski]

You're welcome! Glad it was helpful! Don't forget part 2....which reminds me, I need to make a part 3. :)

[@swank_company]

mannnn i can not express how much I appreciate your work. I have only seen a few of your videos, but the work you put in them, and how thurough you are in your tutorials (like problem solving the eq before anyone freaked out @ 6:32) is so so soooooo appreciated. I am really enjoying getting better at editing, and want to hone my skills as much as possible, so I have a question. these audio balancing techniques, how do they (in your opinion) work with gameplay content. I record all my audio at once... It probably isnt smart, and I should look into splitting the audio up between my mic audio and my game sound fx but that gets really complicated when you use the vods from streaming for youtube content. Without getting too far into the bushes, I guess what I am asking is do I NEEEED to split up my audio, or if i get the audio as balanced as possible before it stream will I be fine? P.S. I also don't want to split up my audio because the ammount of times I have heard, seen, and experienced corrupt files... The more moving parts, the more goes wrong ya know? Thank you in advance! -Swank :)

[@davidokeke7039]

thanks alot this really helped

[@JasonYadlovski]

You're welcome!

[@meatstack]

I know it's weird to comment about this, but thanks for the intro to Audio. I'm bookmarking this video to come back when I'm ready to purchase that's great service

[@JasonYadlovski]

Not weird at all, I do the same thing, if I see a product I like or a service I think it might be helpful, I’ll book market and save it for later. $59 for your first year is super cheap for a service like this. 😜👍😁

[@HoundDogMech]

Really Jason your unestablished hand held video literally makes nauseous, But then I am sometimes subject to vertigo because of an inner ear problem in my left ear.

[@JasonYadlovski]

Ah! Sorry about that! I thought it was better than the wobble that stabilizer put in it. 😜

[@WaddleAero]

Thank you for what you do. I struggle with my audio and go back and watch your channel almost every time I do a voiceover.

[@JasonYadlovski]

You’re welcome, glad you find my videos helpful! 👍😁

[@axetrance]

Haha, me too. It's the third time I watch them. But every time I discover something new as it is very difficult to understand something the first time (in my case); now i feel I really start to get it... :)

[@WaddleAero]

@@axetrance I ended up making a word document with the steps Jason outlined and open it every time I do a voice over. My problem is I have hearing loss and tinnitus that make editing audio difficult. Plus, my recording location is in the kitchen… lots of hard surfaces

[@axetrance]

Thanks for the tip! Good luck further! I have Tinitus as well.

[@CopelandPlays]

thank you this was super helpful made my audio 10 times better

[@JasonYadlovski]

You're welcome!

[@bruceouyang6402]

awesome video guide!

[@JasonYadlovski]

Thanks!

[@danipe1998]

Wow1 This really is magic. Great made video and easy understandable. Thx

[@JasonYadlovski]

You’re welcome!

[@masterof]

Thank you - will there be an episode for how to take out the wind noise?

[@JasonYadlovski]

I may include some tips about that in one of the videos.

[@ArcanePath360]

Some movie studios and TV sets should watch this. I end up watching modern stuff with subtitles most of the time.

[@JasonYadlovski]

Thanks! 😁

[@DrOrion]

Why record to the camera? Would it be better recording to the PC or even a special recording device? Thanks!

[@JasonYadlovski]

Not necessarily, you can record to a camera, just depends on your set up and what you’re trying to do. Either way can work just fine. Thanks for watching.!

[@TheReviewStudios]

Thanks for the refresher for 18

[@JasonYadlovski]

You’re welcome!

[@deadymonkgaming9652]

do you have traning videos that you sell? I love your stuff and you have helped me a lot with my videos I'm still bad but I'm going the right way because of you!

[@JasonYadlovski]

Hi! I don't have one yet. All my stuff is free here on KZbin right now. I'm glad you find it all help fun! What type of training would you be interested in?

[@deadymonkgaming9652]

@@JasonYadlovski I think people are looking for a in-depth training corse now how to use this program professionally at a reasonable price . (At least in my mind) one guy is selling traning to each tab (audio, edit tabe , etc.) For $350 a peace. And to me that's just him robbing people or he is just looking for big companies. But if you can make one for the public average Joe I think you will have something going for you. People are looking into this and want to know how to use it. Just nobody can afford $350 a tab when there is like 6 tabs on this program. ($50 or even $100 on some feels alttle more reasonable) maybe I don't understand this field but that's how I feel. Maybe you can give me a better inside on why it would need to be that much then? But, anyways sorry for my book here haha I just feel like you are a grate teacher and if you can start making traning videos of all the programs withing this editor and you sell them to the public in a real price range you will do good!

[@seanmartinflix]

This video is so helpful.

[@JasonYadlovski]

Glad it was helpful!

[@UnboundedArtandCrafts]

happy B-day Jason

[@JasonYadlovski]

Thanks! 🎂😁👍

[@RinPordykr]

Amazing teaching 😊

[@JasonYadlovski]

Thanks!

[@Ashish-op1yx]

Wow thank you soo much

[@JasonYadlovski]

You're welcome!

[@handsonjavascript]

is there any way to eliminate the keyboard stroke sound completely and only have the instructor sound? any suggestions? Btw, great tips!

[@JasonYadlovski]

If you have the Studio version, voice, isolation may get rid of it for you other than that you probably can’t get rid of it.

[@handsonjavascript]

@@JasonYadlovski thanks for the response! Appreciate that

[@RockWILK]

awesome video... I have a question... I can't see my bus sends or returns in my software... I noticed you were scrolling in Fairlight... I can scroll... how are you doing that? the support at resolve hasn't been able to help me. I'm in 18.5, in the middle of editing a feature, and this is driving me crazy and crazy annoying. ;) I can make new busses, everything is checked properly... all the stuff... but no sends.... my mixer ends at the EQ section and then the name of the track. Weird... Help!!!!!!! Thanks, LOVE your channel.

[@JasonYadlovski]

Hey! I left you a comment on your other question posts, see if that helps. If not, let me know and I'll try and help more. 👍

[@RockWILK]

@@JasonYadlovski You're my hero!!!!! I closed the meters at the top, and everything is there. Amazing how support couldn't figure that out. ;) Anyway... thank you so much, I can finish this film now and actually use the busses. So awesome, much appreciated.

[@axetrance]

A big thank you, Jason!

[@JasonYadlovski]

You’re welcome, thank you for watching!

[@jaybobsgaming]

Absolutely stunning! Thanks for posting!

[@JasonYadlovski]

You’re welcome!

[@l0rdcroissant]

first HAPPY BIRTHDAY and hope the cake was awesome too ;) you know I always wondered what those dials do and been hesitant to playing around with them thinking I'm going to mess things up, hahaha that monitor of yours.... 49"? curved?

[@JasonYadlovski]

Thanks! Cake was delish! The monitor is an LG ultra wide - I think it's 39", curved. Great for working in Resolve.

[@l0rdcroissant]

@@JasonYadlovski awesome, so it was a great day over all for you. thanks, I thought it was a 49", thinking of getting something like that so I don't have to see the split with the 3 I use for now. and I FINALLY got that one video done! lol soooo much corrupt files, caused a lot of problems to the program

[@allworld_360]

SUPER LESSON 💥💥💥

[@JasonYadlovski]

Thanks!

[@3dchick]

Happy Birthday! ☺️

[@JasonYadlovski]

Thanks! 😜😁🎂

[@PuranaMaalika]

This is what I am waiting for

[@JasonYadlovski]

😁👍

[@eie_for_you]

So...how do I save equalizer presets so I can reuse them from project-to-project?

[@JasonYadlovski]

Here's a video on how to do it: kzbin.info/www/bejne/op3CaqewbbZqmbM

[@eie_for_you]

@@JasonYadlovski PERFECT! Man! I could have used this a few times ... and now I will!

[@JasonYadlovski]

😁👍

[@BrandonNyte]

This was very useful, thank you.

[@JasonYadlovski]

You're welcome!

[@LoveAndSageTarot]

I'm following along but I only have 4 bands, not as many as you have here in this video - do I need to click something to see the additional bands? thanks - i'm learning a lot here!

[@JasonYadlovski]

Are you in the Fairlight tab and using the EQ in there?

[@LoveAndSageTarot]

@@JasonYadlovski hi Jason - I think the problem is that when I have my laptop plugged into my TV - it messes with the viewing….I tried resolve unplugged from TV and then I could see everything was as it should be…is there a setting I need to click if it’s plugged into my tv?

[@JasonYadlovski]

+Love & Sage Tarot make sure you are using the EQ in the Fairlight tab by the mixer, not the EQ in the inspector.

[@infinityphotorob]

What about de reverb? I am used to having this in Premiere. Lots of my onsite interview stuff is in an office or inside without any treatments. Even with a great mic you get some sort of reverb to deal with. This EQ tutorial helped me a ton though. Thank you!

[@JasonYadlovski]

I don't have a De-Reverb that I use. The best is probably from Izotope. The Waves NS1 helps a little w/ reverb, but not a ton.

[@infinityphotorob]

@@JasonYadlovski Man that is a bummer no real reverb as this is a super common thing to need. Ok so here is a weird one you might have insight on. I am working in a multicam timeline with several different interviews. So I am doing all adjustments in the base timelines. Color works great like this. But all of the adjustments in Fairlight disappear when I switch to my main timeline. I go back to the root timeline and they disappear too? So the fairlight adjustments that are so awesome are disappearing? I am a Premiere Pro Refugee learning this stuff in Resolve. Your videos have been my go to for almost everything. Thank you for putting them together.

[@JasonYadlovski]

That's a strange issue, not sure why it wouldn't hold your settings. It should....🤔 Thanks so much for watching my videos, glad they are helpful!

[@pennsylvaniapatriot22]

Awesome video. This helped a lot. Thanks!!

[@JasonYadlovski]

You're welcome!

[@Narwal88]

Great videos as always! Jason, I'm desperate! I follow your advice but for some reason, I often get a "metallic" voice (almost like someone is on the phone) and I can't seem to get rid of it. I've tried just about every setting, every plug-in, but this problem remains. Any suggestions?

[@JasonYadlovski]

Thanks! Can you send me a link to a video with this issue or send me a sample?

[@Narwal88]

@@JasonYadlovski I can send you an audio sample, sure. Where should I send it?

[@JasonYadlovski]

Assuming you can email it, you can send it here: [e-mail]

[@canadalawexperts_]

We love your energy and great content!

[@JasonYadlovski]

Thanks! I appreciate your kind words. 😁👍

[@dancrosby6091]

Thanks bro... Another great video👍

[@JasonYadlovski]

You’re welcome, thanks for watching Dan!

[@swaha55]

Hi Jason, If I edit a sound clip in Resolve can I save the edited clip to the Master bin to reuse?

[@JasonYadlovski]

Sure. If you make it a compound clip it’ll automatically appear into the media pool.

[@stokajca]

Realy helpful 🙂

[@JasonYadlovski]

Thanks for watching!

[@ILM2219]

Good job, Jason!

[@JasonYadlovski]

Thanks!

[@rhythmwithsangita]

helpful video indeed.. but im facing a problem using EQ. its not showing though its checked in mixer 3dot button. plz help

[@JasonYadlovski]

Did you try scrolling up and down in the mixer on the fairlight page?

[@rhythmwithsangita]

@@JasonYadlovski hi got it finally after unchecked some from 3 dot menu :) your video really help me a lot :) thanks for your response :)

[@geographer1976]

Thank you! I"m applying your advice in the current video I'm working on that uses my studio voiceover. I have seasonal allergies, so my voice tends to sound nasally. Is your advice for fixing "muddy" voice applicable to my nasal sound, or do you have another recommedation?

[@JasonYadlovski]

You’re welcome! So I’d try both, add a high pass filter and bring it up in frequencies to see if it takes out the nasal sound. Then I’d grab an EQ point and sweep in the 600 to 2K range, find the bad frequency and then cut it.

[@matthewd2406]

how do you take a mono shotgun track and pan it to both sides for stereo

[@JasonYadlovski]

I guess the first question is why do you wanna make it a stereo track and not keep it a mono track? I would keep it mono, but if you do wanna make it stereo, you could try making a stereo track, drop in the clip. Select the clip, right clip click, go to clip attributes, then, on the audio tab, you should see two channels, right and left, just select your one audio source for each channel. If that doesn’t work, just create two tracks, drop the audio clip into both tracks, then pan one track to the left and one track to the right

[@johncunha319]

I would like to see a video that covers rendering crashes in Davinci Resolve 18 and how to solve them specially when you don't have a super computer. Any input is welcome. Thanks.

[@JasonYadlovski]

Here’s an old video with a setting that you can adjust that may prevent crashes. Until I turned this off, I used to get crashes often. kzbin.info/www/bejne/f5ymfI2uZc5oa6c

[@relatingbadge64]

My audio used to sound like a dying cat, but now it sounds like my headset mic is some sort of pro mic that is actually bearable to listen to. Thanks a lot!

[@JasonYadlovski]

Great!