Make Your Own LIVESCOPE Hover-Rig Baits, Ai Tracer Shad Mold

  Рет қаралды 34,220

World's Worst Fishing

World's Worst Fishing

Күн бұрын

Пікірлер: 99
@WorldsWorstFishing
@WorldsWorstFishing 10 ай бұрын
Link to the mold: anglingai.com/4-tracer-shad/
@scottkidder438
@scottkidder438 10 ай бұрын
lurepartsonline has the jigs in case people take the time to read replies ;)
@WorldsWorstFishing
@WorldsWorstFishing 10 ай бұрын
Glad to know ​@scottkidder438
@SolidMango-gh3jk
@SolidMango-gh3jk 10 ай бұрын
4” make a great chatter bait trailer as well! Almost like the spunk shad.
@Stellarbaits
@Stellarbaits 9 ай бұрын
Hey brotha. Nice job on the tracer shading video. I just picked up all sizes of the tracer shad molds as well as the tail molds for each size. I let them know in the comments that I saw it here on your channel as well as letting them know that I didn’t know they existed until I heard of them from your channel. Not just for this video but thank you for all the videos especially the ones that cover the beginner mistakes. I know I’ve saved a lot of time and money not making those mistakes. Always looking forward to the next video 👍🏻
@basscatlildave
@basscatlildave 10 ай бұрын
I don’t have live scope but see an awesome trailer and love that hover rig set up.
@chuckpeck8323
@chuckpeck8323 10 ай бұрын
Nice thorough demo as usual. Great color choices to show off the mold and really great rigging demo!
@WorldsWorstFishing
@WorldsWorstFishing 10 ай бұрын
Thanks and thanks
@aamick71
@aamick71 4 ай бұрын
Love this mold!!
@kamarte
@kamarte 10 ай бұрын
Well, very nice mold and very gorgeous shiner/shad baits made! Arkansas shiner is the one that works everywhere!
@WorldsWorstFishing
@WorldsWorstFishing 10 ай бұрын
Very true!
@ahoj85
@ahoj85 10 ай бұрын
Nice colours and mold. Just as a tip, for the hover rig, you can use the sinker with heat shrink tubing to adjust it to the hook, so its much easier to rig it and you also can change the bait if needet easylie 🙂
@WorldsWorstFishing
@WorldsWorstFishing 10 ай бұрын
I've seen that..downside would be that it adds mass and could make it tougher to fit everything in a bait without sacrificing the integrity of the plastic too much
@leehowell4258
@leehowell4258 10 ай бұрын
Awesome lookjng bait! That laminate turned out incredible so did the electric chicken! Nice way to make a hover rig without the typical jigheads! Thanks for the tip!
@WorldsWorstFishing
@WorldsWorstFishing 10 ай бұрын
Thanks 👍
@bayouburner281
@bayouburner281 10 ай бұрын
Good looking bait-I dig that “lateral line” on the side. Looks like it would benefit rigging correctly 👍🏻
@WorldsWorstFishing
@WorldsWorstFishing 10 ай бұрын
The line is really cool
@chrishebert3240
@chrishebert3240 8 ай бұрын
Question I got is when I do my tail molds I do it the old way when you shoot the mold then cut the tail then shoot the body color. The problem I have after I do this is some of tails don’t bond together and fall off. I don’t have the tail mold and probably would help out a lot.
@markroyer3602
@markroyer3602 10 ай бұрын
Nice colors. An old school dart head jig can be buried in the bait for the same action. That's how we rigged the Bass Assassin when it came out 30+ years ago.
@roberthoward7360
@roberthoward7360 10 ай бұрын
Awesome mold and awesome colors and thank you for sharing it Chris 👍🥇🏆🏆
@WorldsWorstFishing
@WorldsWorstFishing 10 ай бұрын
Thanks for watching
@pugglepuggle
@pugglepuggle 10 ай бұрын
You rock with the awesome colors.
@WorldsWorstFishing
@WorldsWorstFishing 10 ай бұрын
Thanks
@grantruegnitz2878
@grantruegnitz2878 10 ай бұрын
Thank you, Chris! Great video. Really appreciate the rigging information.
@WorldsWorstFishing
@WorldsWorstFishing 10 ай бұрын
🙏🙏
@xdh10x
@xdh10x 10 ай бұрын
Still trying to figure out correct way to rig the core tackle jig heads. Baits roll over hook down when sinking and then roll causing line twist when reeling in. Guess I’m gonna buy hooks and weights separate and rig like this video. Just like Ben does. Good video. Great looking baits.
@customrodsandbaits8620
@customrodsandbaits8620 10 ай бұрын
Yep, gotta order it now 😂 nice work as always! 👍
@WorldsWorstFishing
@WorldsWorstFishing 10 ай бұрын
Thanks
@JasonSmith-bv3yd
@JasonSmith-bv3yd 10 ай бұрын
I really like this split tail mold....cool design...I use the basstackle 4.25 cuz it was the nicest one available for walleye til this was made! A must have for me eventually.....currently working on getting g5s....and more g4s and 6s Cool video man finally had time to watch
@WorldsWorstFishing
@WorldsWorstFishing 10 ай бұрын
You'll love the G molds..I can't pour em enough
@KarenProck
@KarenProck 10 ай бұрын
Beautiful baits and molds, almost makes me want to make my own !! Great tips on how to hover baits, didn’t know how before. Can you do that with the swimbaits also? I would think you could, have you done it and is it effective? Great video as always by the master creator!!
@NedWacky
@NedWacky Ай бұрын
Hey buddy good work, they are really pretty, no way a bass could pass!
@jameslara5352
@jameslara5352 6 ай бұрын
If you take the smallest one make it a glow and tandem rig it good bait for spectrum trial under the lights at night
@sweetboysoutdoors
@sweetboysoutdoors 10 ай бұрын
Yes!!! That’s such a hot mold! I gotta get one!! 🤙💀🤙 Another Angling Ai masterpiece 🔥
@WorldsWorstFishing
@WorldsWorstFishing 10 ай бұрын
Yessir
@travislovelace44
@travislovelace44 10 ай бұрын
Nother sweet mold form ai saw them on their website in joy the content keep them coming can't wait to see the new boat
@WorldsWorstFishing
@WorldsWorstFishing 10 ай бұрын
Me too...I'm ready for it
@Landofbaits
@Landofbaits 10 ай бұрын
Great video I think I’ll be ordering this mold soon
@WorldsWorstFishing
@WorldsWorstFishing 10 ай бұрын
🙌🙌
@ethantaylor1050
@ethantaylor1050 9 ай бұрын
Like the molds! You should make 6th Sense's Wild Lava Craw color. black and red laminate. Really awesome color!
@ShaneJMcNair
@ShaneJMcNair 10 ай бұрын
So is there a metal based flake that makes your soft plastic more visible on FFS? I know a company has already cane out with a gel to apply to soft plastic to make them glow more on FFS... 🍺🎣
@WorldsWorstFishing
@WorldsWorstFishing 10 ай бұрын
You don't want metal flakes..blow up your microwave lol...yeah the FFS gel to me is a gimmick...I didn't see anyone using it over the weekend, more about settings
@anglerco6738
@anglerco6738 10 ай бұрын
I need a 2" tracer shad
@WorldsWorstFishing
@WorldsWorstFishing 10 ай бұрын
It's coming
@craigjefcoat1384
@craigjefcoat1384 9 ай бұрын
Great video.
@RyanEdwards-q1n
@RyanEdwards-q1n 9 ай бұрын
What plastisol are you using ?
@clydesharman2053
@clydesharman2053 9 ай бұрын
Where can I buy some of soft plastics
@meb212
@meb212 9 ай бұрын
My first thought for this was the 3 inch for Pompano.
@f1lthyskillz426
@f1lthyskillz426 10 ай бұрын
Do you know if they are going to make an eight cavity mold? If so that might replace my eight cavity jigging minnow mold. The body on these look more thick, should catch a few more fish before needing to be replaced.
@WorldsWorstFishing
@WorldsWorstFishing 10 ай бұрын
I'm not sure..if they make a smaller size it will likely be more cavities
@jamescooper342
@jamescooper342 9 ай бұрын
what's name of the video about not filling molds in all the way some of my molds don't want to fill up all the way what causes that i shoot it slow top off the sprool and i an inject the mold 350 to 320 and it does not fill in all way some of my molds do i even tried cleaning the molds for moster i put pressure when i shoot with the injector i dont know why its doing that do you have a video about it what to do you think the molds are cold is that why its doing that
@russellchavarria7452
@russellchavarria7452 8 ай бұрын
Where can I find a 2 inch laminate paddle tail mold
@craqerjaq
@craqerjaq 10 ай бұрын
There's a really good argument that fish need a safe space (out suspended in deeper waters) to really thrive. When they are getting pressured everywhere they go, there's potential to really negatively impact things.
@WorldsWorstFishing
@WorldsWorstFishing 10 ай бұрын
It could also force them back up shallow where traditional fishing will be better
@henrycoleman5715
@henrycoleman5715 9 ай бұрын
😂😂 Imagine were living in a world where u get banned for anything you say and fish need a safe space
@jamesperry5084
@jamesperry5084 6 ай бұрын
I would like to see the tracer body with a boot tail and a belly split for weed less swim bait or weed less under spin using a texposed hook probably 3 inch up to 6 inch
@jimstewart1946
@jimstewart1946 2 ай бұрын
where do you buy your micro powers thank you
@WorldsWorstFishing
@WorldsWorstFishing 2 ай бұрын
@@jimstewart1946 dead on plastix has shift powders
@FishedInCustomBaits
@FishedInCustomBaits 10 ай бұрын
great video! What happens if you shoot the plastic to hot
@WorldsWorstFishing
@WorldsWorstFishing 10 ай бұрын
Usually isn't ideal for injection that's all
@jamesneal6537
@jamesneal6537 10 ай бұрын
Your Awsome bait maker.
@WorldsWorstFishing
@WorldsWorstFishing 10 ай бұрын
I appreciate it
@falures
@falures 10 ай бұрын
Need that electric chicken color done in those for saltwater looks awesome
@bassinmike8478
@bassinmike8478 10 ай бұрын
Those are perfect chatter bait trailer 🎉
@WorldsWorstFishing
@WorldsWorstFishing 10 ай бұрын
Definitely
@donnehls8963
@donnehls8963 9 ай бұрын
Can you add tungsten powder to you pours?
@bendaniel2334
@bendaniel2334 10 ай бұрын
have you ever done a color match on opening night ? I tried to last night,,, complete fail
@WorldsWorstFishing
@WorldsWorstFishing 10 ай бұрын
Opening night?
@tdrew1343
@tdrew1343 10 ай бұрын
Chris opening night by zman
@chucktimm9803
@chucktimm9803 10 ай бұрын
very nice sir
@WorldsWorstFishing
@WorldsWorstFishing 10 ай бұрын
🙏🙏
@petravanderkwaak655
@petravanderkwaak655 2 ай бұрын
Where can i buy the mold you are using?
@WorldsWorstFishing
@WorldsWorstFishing 2 ай бұрын
@@petravanderkwaak655 Angling Ai molds
@douglascouvillion855
@douglascouvillion855 9 ай бұрын
Is the body too meaty to Texas rig?
@henniewiese4387
@henniewiese4387 2 ай бұрын
Have you tried the triple injector on this bait?
@WorldsWorstFishing
@WorldsWorstFishing 2 ай бұрын
@@henniewiese4387 yes
@henniewiese4387
@henniewiese4387 2 ай бұрын
@@WorldsWorstFishing is there a video of it?
@robertcates2549
@robertcates2549 10 ай бұрын
Use it on a small ball head, like the FinnS shad.
@WorldsWorstFishing
@WorldsWorstFishing 10 ай бұрын
Hell I would even throw it on a spot remover
@she-man
@she-man 10 ай бұрын
Was that a moldgasm at the beginning? 😂
@WorldsWorstFishing
@WorldsWorstFishing 10 ай бұрын
oh you know it
@jacobchurchwell2410
@jacobchurchwell2410 10 ай бұрын
where do you get your injector
@WorldsWorstFishing
@WorldsWorstFishing 10 ай бұрын
Basstackle
@rhacker3058
@rhacker3058 10 ай бұрын
What Is Smoking On Those Molds??
@WorldsWorstFishing
@WorldsWorstFishing 9 ай бұрын
Smoking?
@jordannarlock7995
@jordannarlock7995 10 ай бұрын
Are you selling these?
@deafishunter5998
@deafishunter5998 10 ай бұрын
One question, can you do a video of melting baits on a small stove without using a microwave?
@WorldsWorstFishing
@WorldsWorstFishing 10 ай бұрын
no beacuse you dont want do cook plastic indoors, fumes can be bad
@chrisangerer6015
@chrisangerer6015 10 ай бұрын
I told the AI team to stop sending you new molds as they keep costing me more money. Been searching for almost a year for this mold. Only problem I had is I bought the 3" and then the 4" got released. It will be delivered tomorrow
@WorldsWorstFishing
@WorldsWorstFishing 10 ай бұрын
Good to have both tho
@abdelrahmanelmesany1782
@abdelrahmanelmesany1782 6 ай бұрын
جميل حق"
@MagnusSentDooM
@MagnusSentDooM 10 ай бұрын
U gotta change ur channel name, these baits look 🔥😂
@WorldsWorstFishing
@WorldsWorstFishing 10 ай бұрын
Haha th
@thombaz
@thombaz 9 ай бұрын
If its smells good It's surely not CNC oil.
@AnonymousOtters
@AnonymousOtters 10 ай бұрын
Dear god, causing some stress putting that nail weight in with scissors...
@RyanEdwards-q1n
@RyanEdwards-q1n 9 ай бұрын
What plastisol are you using ?
@RyanEdwards-q1n
@RyanEdwards-q1n 9 ай бұрын
What plastisol are you using ?
@RyanEdwards-q1n
@RyanEdwards-q1n 9 ай бұрын
What plastisol are you using ?
@WorldsWorstFishing
@WorldsWorstFishing 9 ай бұрын
Dead On Plastix
DEAD-SHIFT Pigment Party!! New Colorshifting Pigments for the Bait Maker
26:25
World's Worst Fishing
Рет қаралды 17 М.
FIVE MISTAKES You Might Be Making In Soft Bait-Making
33:20
World's Worst Fishing
Рет қаралды 47 М.
It works #beatbox #tiktok
00:34
BeatboxJCOP
Рет қаралды 41 МЛН
小丑女COCO的审判。#天使 #小丑 #超人不会飞
00:53
超人不会飞
Рет қаралды 16 МЛН
Beat Ronaldo, Win $1,000,000
22:45
MrBeast
Рет қаралды 158 МЛН
Cheerleader Transformation That Left Everyone Speechless! #shorts
00:27
Fabiosa Best Lifehacks
Рет қаралды 16 МЛН
ZMAN Told Me I Infringed on their Patent!
18:32
SDG Custom Lurecraft
Рет қаралды 135 М.
CORE-SHOT Pintail Rip Rap Mold Demo: Soft Plastic Bait Tutorial
24:54
World's Worst Fishing
Рет қаралды 11 М.
Dead On Plastix RED LABEL Plastisol Review! The Best Bait Plastic??
29:46
World's Worst Fishing
Рет қаралды 19 М.
Is This Bait Considered Cheating?
35:19
Baitchuckin
Рет қаралды 33 М.
NEW Angling Ai G-4 Swimbait Mold; Lure Making Tutorial
27:25
World's Worst Fishing
Рет қаралды 28 М.
Let's Make SKIRTED GRUBS!  New Molds and New Techniques!
30:00
World's Worst Fishing
Рет қаралды 74 М.
Making Realistic Soft Plastic Open Pour Swimbaits
12:40
Epic Bait Molds
Рет қаралды 69 М.
Secret Making a minnow lure of foil CD disk
18:21
Making lures
Рет қаралды 374 М.
Hobby Lobby Has Colorshift Flake!  (Demo All 6)
14:28
SDG Custom Lurecraft
Рет қаралды 33 М.
It works #beatbox #tiktok
00:34
BeatboxJCOP
Рет қаралды 41 МЛН