Make Your SANDING BELT at home | DIY Sanding Belt Joint

[@iggysixx]

Thanks! I was struggling with this. (The joint always ended up being too thick) The tips on removing the grit are very helpful :)

[@MikeOsten-dr5fp]

Making small oddball sized belts and making larger size belts is worth doing. However, the small popular sizes may not be worth the effort. I would say it depends on your circumstances.

[@grahamwhitebooi]

Good job excellent 😅

[@senorsunset]

This was quite professional tbh. 👍

[@DavidsProfession]

Glad you think so!

[@stevenjordan6389]

Plastic wrap at glue joint?

[@antitheist9976]

Excellent method, nice work 🙂💯

[@DavidsProfession]

Thank you 🙌

[@grahamwhitebooi]

Wich glue do you use can l use contac glue

[@DavidsProfession]

thin coat of epoxy glue(a+b glue)

[@numanali1734]

​@@DavidsProfession 0:37

[@ekowahyuwibowo9494]

use sheldahl tape instead glue, that glued part will tear apart when u press object towards it. i prove it using my sb90, sheldahl tape is more resistant and flat toward object

[@DavidsProfession]

Yeah someone else also suggested me the same tape..Thank You

[@stevenjordan6389]

What angle ?

[@alantan6255]

Great job and nice video enjoy watching

[@DavidsProfession]

Thank you 🤗

[@prinshudhurve2968]

Whts liquid name

[@yuanweizheng3043]

hi,which glue do you used?

[@DavidsProfession]

you can use transparent epoxy (A and B

[@colinwoolford9640]

what paste is used to do the join.

[@DavidsProfession]

Its kind of a super glue.

[@leroiprice1586]

@@DavidsProfession But you used epoxy right?

[@VOVAR]

Beautiful result . 👍

[@DavidsProfession]

Thank you! Cheers!

[@totsapo6469]

No need o clamps for cutting

[@mountainmantararua8824]

You make it seem so easy, I don't think that I have your patients. I would take so long over it that I would forget why I was doing it . 😂😂 Cheers

[@RabbieRobinson]

How many patients do you think he has?

[@tararuaman]

Well spotted young man although he could be a doctor in his spare time. 😂.

[@runeonaquest9347]

Damn. This looks difficult. I don’t have a third hand to help 😢 00:39

[@Bonanza06c]

Think I’ll will just buy one

[@donaldvikashsingh1350]

Which glue you using please tell me

[@DavidsProfession]

you can use transparent epoxy (A and B)

[@mikeox_is_small]

possibly dumb question but is there a reason it needs to be angled? it would be the same thickness if it wasn't yet all my belts are angled.

[@michaelclark2840]

Its to give greater surface area for gluing but also allows for lead in of the joint into the piece being sanded. If it was a 90 degree join then the whole of the join would hit the workpiece at the same time, stressing the join too much.

[@01arron]

Great ideas. Takes way too long for me to wait though 😆

[@DavidsProfession]

❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️

[@arnoldbrad5963]

az ossze ragasztáshoz mijen ragasztót használsz?

[@arnoldbrad5963]

De magyarul irjad

[@PetsGeographic]

Good job

[@DavidsProfession]

Thanks

[@HHHGeorge]

As a workshop exercise it's good, but it seems to have had a lot of steps and would have taken an hour at least. That being the case, unless your time is worth less than the cost of by buying the sheets ready made, this is not an efficient use of your time.

[@juandediostrianasosa]

Mejor compró una caja de 100

[@jimmay1988]

Ill work 1 extra hour OT and buy new one.

[@tatian_H]

All of that work for £3?!?!?😮

[@kaissattieh]

That was a pain in the ass. There's this stuff called tape or thin pieces of plastic and pieces of something that you could have used instead of removing the grid from the paper that's already there.

[@mr.lynnrosaasen8218]

That was not your 1st. Attempt at splicing a sanding belt!

[@SoCalRhetor]

OMG why?

[@ahmicm23]

OMG OMG OMG, what's so hard to understand?? There are some places on Earth where there is no other solution and where you have to DIY things like this! There are some places on Earth where is much cheaper to DIY! There are some people on Earth that love to make their own tools, rather than buying! Meaning, there are so MANY reasons why people are choosing DIY, like myself, who can't buy sanding belt with specific dimensions, and have to make one. And that's why I'm here, trying to find best way to make my own sanding belt.

[@ВарфоломейБугринский]

Это когда совсем нечего делать можно такой хуйнёй заниматься. В магазине продаются ленты.

[@thomasdambrowski18]

Unfähigkeit lässt grüßen

[@dachee]

This process has many flaws. Not a good process to follow.

[@sverigeforst6615]

That's a really bad idea!!! And it's not worth the money either!

[@SuperBartet]

Belts are so cheap, not worth my time doing this.

[@Hikeswithmilo]

Way to hard