Metal Shaping with ONLY Hand Tools STEP BY STEP!!! How To Make Compound Curves

On this episode of Make It Kustom, I try and duplicate a panel for Jordan’s grill shell using only hand tools. No bead roller, no English wheel, no power hammer, no kick shrinker, no planishing hammer. Enjoy!
Join this channel to get access to perks!!
m.kzbin.info_channel...
Shop merch here ⬇️⬇️⬇️
www.japhandskustoms.com/shop
Learn how to make your own shrinking stump here:
• How To Make Your Own S...
Learn how to make your own slapper tool here:
• How YOU Can Turn An OL...
How to clean and polish your hammers:
• How To Restore & Re-Fi...

[@kirbyloulewis3826]

I gave been in the metal work and fab industry as a technician for 30 years and an instructor for 6 years and I haven't seen anyone even close to his abilities and instructional talent on KZbin. I cant speak enough about this man's talents ! Keep up the awesome work!

[@mikeanderson1139]

I don" t think that his skill as an instructor/entertainer is stressed enough in the comments. I am really dense when it comes to instruction, and this guy has me trying all kinds of metal feats! They don't look as good, but what an enjoyable experience. I just purchased my Mother Thumper and stump kit and you would not believe the quality of the hammer alone, I almost hate to use it. Just have to save up for the timber now. Thanks Karl.

[@moparnut6933]

Ron Covell is on here and he's better.

[@davidspin5353]

Yeah, Ron Covell is prolly da best, in the industry!, But Make it Custom guy has it going on.@@moparnut6933

[@andrewlundsgaard3399]

Ron Covell has 30 years of experience beyond Karl's. Ask Ron what he thinks of Karl. I doubt he'd be as harsh as you.

[@williamcollier223]

Incredible ! I've been in the trades for almost 40 years and very seldom am I impressed with someone's work and their ability to communicate it step by step. Great job!

[@dougjones4987]

Thanks

[@mikeschauger5498]

Iam happy with the fact that he not only shows' how to do the work with his tools but also shows the average person who may not have all those tools how to do it with only simple tools anyone would have on hand. The explanations are great also. I've watched a lot of channels and videos and think these are the best, so I subscribed. Thanks for sharing your knowledge.

[@Marckusmtrmth]

I also love the fact that he says You don't need to go out and break the bank to start and do good work.

[@MakeItKustom]

Thanks for the kind words and support Mike! I set up road blocks for myself when I was younger by believing that I had to have special tools and expensive stuff to do metal shaping and just having those thoughts held me back years

[@jspettitt]

I know nothing about being a panel beater but you've explained it in such a way that it makes it look possible to me. I'm not sure what you do full time for work but you would make excellent teacher. Also the video was put together superbly. The audio remained consistent throughout its entirety. The audio fade away when you are hammering and yet when you start talking again the volume is perfect.. I was not having to adjust my volume up and down throughout the video. For a KZbinr that's just as important as the content in my opinion. This is the first video I have seen of yours, I'm a subscriber

[@timhandford539]

I absolutely agree. Some of the best videos I’ve seen. Awesome skills and explanation and he’s really charismatic as well, which doesn’t go astray.

[@derekcooper4569]

4z,,

[@sourdough51]

I've been doing sheet metal work for over 50 years and I learned a lot from this video. Thank you for sharing your skills!

[@MrSteve2714740]

its so refreshing seeing the young guys keeping "Old School" Craftmanship alive and well Great video buddy keep em coming

[@garythompson2101]

After watching this video, I was thinking the exact same thing!

[@hadlock]

You're actually really good at explaining this stuff. You're the only guy I've seen on here who seems to actually understand what they're doing enough to explain it to others. Great job keep up the good work.

[@lescox2534]

First class demo

[@charlesyates6687]

Shaping metal with hand tools is a great tutorial series to show . Kinda like those that rely on grocery stores should be tought how to hunt and grow .

[@MakeItKustom]

Good point!

[@chriscurtis1578]

I'm in the process of restoring an old cast iron wood stove that has metal sides. I'm using 16- & 20-gauge sheet steel and I'm gonna tell you, that stuff ain't no joke! I'm sore from head to toe but it's going to look brand new when I'm done. I have a whole new respect for what you guys do every day.

[@dalewestlake2137]

You explanation off locking in, closing the end of the tuck, creating a bubble, and forcing into itself. Best showing and explanation of the technique I’ve ever seen or heard. As usual brilliant.

[@willisxj]

Props on the proper PPE! Especially when grinding. You’re setting a great example.

[@cato9tales141]

X2 .... sets a great example 8)

[@allansmith257]

Love how you always bring it back to you don’t need million dollar tools

[@morgansword]

Carl,... I tried to watch thinking its late at night but this is something I love to watch. I went to sleep tho and woke up in so much pain.. pain from hell as my broken back problem has got much worse, I now have arthritis in the area I hurt n doctors made worse. I got hurt when a man fell from his roof and I stupidly caught him in mid fall. He had a torn tee shirt in the pocket area, I had nine major fractures which was three completely severed vertiba in the neck, doctors ain't figured why it didn't kill me from that alone. Several hours later, from them going through my throat (they moved my parts I swallow with to the side) and then used bicycle chain links and sheet rock screws in those to hold the vertebra in place. I could not swallow even a mashed pea for several weeks learning to use my throat to eat food again... never extend the body with a large amount of weight in the arms. I'm a ex body builder when your age so at a small two hundred an twenty little more and a neck line of twenty one inches around catch the man who fell from his roof with no fear of getting hurt... this is in two thousand five, oct., first i make the mistake I can do anything ... I was not thinking well as he weighed just over three hundred pounds and was almost seventy years of age so, although the fall from where i caught him must of only been say twelve feet from that roof line to my arms.. his injury was some bruises from me pinching his skin some. Those left his body in just a few days and I now am seventy two n watch youtube as a teaser of my first love... fixing cars n other ... anything with a engine or steering device. I did what your doing now and something i got away with was a heat gun and wet paper dried in place to form a pattern that i used body hammers, heat and ice to try and form different shapes... I look at the tools that you have made... I wish that at the time I rebuilt a forty ford two door business coop that had laid in a chicken coop and was severely rusted/eaten away from that horrible acid in their poop... every hard part to remake was so much fun trying to do this. I was successful in making a firewall and the grill using just wet paper that I formed inside the bad metal... before removing it from its prison of chicken crap. I did not even suspect things like a wire feed welder, a tig welder... just a good torch, and a stick welder. It takes so much patience to do this kind of work and keep the dream alive. I did win some small town trophies for awards i got in car shows. I had hundreds of polaroid self developing pictures... I kept those for a long time but our technology and a small town before internet hick boy at the time of my build.... Oh to share those hours of tapping the metal into shapes... the truth is, had I had someone like you to teach me these methods, I would of saved hours of hard work/felt more like playing to me at the time. I so enjoy your skills that you are learning on the fly and stuff someone had to of showed you or even videos of the different ideas.... just little stuff you seem to just keep getting better at this type of fun/work... I think of you as a younger version "Chip Foose" who is a great fab man. He is like you in many ways... never doubting if you can but just what you know you will find the methods of doing. Carl, I think that your name may reach many high levels of skill. Your tall friend and self using wire to form the shapes desired to make new parts or even your own ideas. If Henry Ford could build and name a car after himself, I kind of suspect there might just be a car named Carl someday. I don't go anywhere except hospitals and meet some young nurses.. bite my wrist thinking if I were just thirty years old again.. youth is wasted on the young as most have their heads on a hand held phone playing catch a fish or build a castle instead of going out to their garage/lean to or just a dirty driveway an build something, maybe even toss a real fish line in real water n catch trout for real, cook on a campfire and eat them charcoal edges and all. I spent every minute I could that I wasn't working in a garage that I built myself. Just don't forget to include your lady in your ideas and share hers as well. Kind of a miserable world if you don't have someone to share the dream with.. sorry for the too long comment but you just bring out the best in people n you seem kind... I just hope you don't change as success becomes obvious

[@peterwiley4383]

Thanks for this. As an educator I’d like to compliment you on how clear your explanations and examples are for us laymen.

[@brianhawes3115]

I was curious if this could be done with aluminum? I have an airstream trailer that could use some inside panels

[@Dagrond]

It never ceases to amaze me that you can take something that looks pretty close, smash it with a hammer until it looks like absolute hell, nod approvingly, hit it some more and watch it turn into perfection. There's some "insert magic here" part that I miss every time.

[@MakeItKustom]

Ha ha ha yeah that’s what Metal shipping is!

[@woodtool2882]

I usually won't commit this much time to a video. This one was worth it.

[@bennettscustomsco]

If you could just weld that in place that would be great! Another great demonstration of skill with little tooling! You’re a wizard Harry!

[@johnmcclain3887]

I've worked steel and iron over fifty years, but mostly solid stock, machining, welding, forming, but am watching because you are doing the sheet metal, which I'm not skilled at. I noticed you use the cross pein to "close the fold", it seems to compact the metal very effectively. I really enjoyed your hammer work, you brought it right in very nicely. I've never seen a slap hammer used before, and it was nice to see it smooth out those little ripples. Thanks!

[@ryankomar6033]

I appreciate you only using had tools Carl. I feel like I have skipped a step using all the tools that I have available to me. You are a gifted person, thanks for taking us on your metal working journey.

[@jonathanwiggill8242]

Thank you so much for doing this video! I really appreciate you taking the time to show and explain hand tools only!

[@s.arepairworkshop466]

Very hard work

[@MakeItKustom]

You’re very welcome man!

[@jonpacheco5711]

Carl, I can't tell you how much I appreciate you showing these techniques to be able to get started. What you taught would take semesters of school to teach if they even offered it. Thanks again and looking forward to more videos.

[@chrissandberg8856]

This is what you and your videos are all about, the DIY person and how it was, and still is done today. You do the hobby a real service for those of us who need the little guidance that you can't get in books or from someone telling you how to do it. Watching you is such a great pleasure... All I can say is THANK YOU Karl..!! TX Mr fixit Chris :)

[@Rick-O-Shay60]

Yes, I DID enjoy this video, & Yes, I DID learn from it. Thank You Carl, You are an awesome fabricator, & you have a knack for instructing that comes across informative, breaking it down so that a layman can catch the "O-Yeah" factor. No doubt, whenever I need to learn how to Make It Kustom, you got it covered.

[@MakeItKustom]

Right on Ricky I’m stoked! Cheers thanks for watching!

[@kaboom-zf2bl]

@@MakeItKustom and thats the difference one wants to see ... sure all the high tech machines are nice for large volume work ... BUT they just need memorization to do the job .... doing the same thing by hand takes longer BUT it then shows that the person HAS the skill to do the job ... and the better they do the better they teach it .... in just this video ... sure you made mistakes but you also corrected them.... stuff happens ... the fix is easy . an hour or two and you have mastered a machine program ... 20 or 50 years and you have become accomplished in doing it by hand ... maybe by the end you will have mastered it ... BUT that is never attainable but worth going for

[@malsoonsakit4786]

Pannel beating has earned a high digree of respect after watching your video. Many thanks for making this instructable. Great personality and excellent audiovisual methodology. Greetings from Beirut

[@cameronbruce1862]

I found this as a KZbin wild card. I now have an answer as to HOW an automobile prototype is/was made. LOVED THE VIDEO although there is a hell of a lot of skill there and seeing a CRAFTSMAN demonstrate the craft is fantastic. It has now inspired me to want to make a pedal car for my new-born grandson. Hopefully Ill be able to achieve this goal in time. THANKS for the INSPIRATION.

[@Matt_1019]

This channel only keeps getting better!!! Learning so much. Always good to know how long things take. Thank you guys.

[@s.arepairworkshop466]

Welcome

[@mattcasoni]

Totally badass. Thank you

[@1nvisible1]

*@**40:24** great banded 4x4 solution for an old stump or sandbag. Looks very portable, how did you dish it?*

[@johnkemas7344]

Always nice to see old school techniques being remembered and practiced, great job!

[@scottschenk5456]

Tin Knocking is an artform that has all but disappeared. It's good to see a young man who has embraced it. This skill has been diminished with plastic bodied cars. The importance of pattern making is also good. My background is in aerospace sheetmetal fabrication, aluminum mostly, for about 24 years. Keep up the good work!

[@trevorvalaire6104]

Having done a metal forming course at the local tech collage under a 5ft 2inch Yorkshire man who made a living from making Jaguar radiator shells etc with sublime finish I can appreciate this young man's skill; He is superb plus he can explain it with grammatically correct English. You have skills which must be preserved. Thank you

[@wetcoastfab]

Love watching you work your magic! I'm learning so much, thanks for putting the time to make these videos!

[@davesmith8936]

These "How-To's" are so inspiring! I really am looking forward to doing some sheet metal work on some project in the future! I already used some of what you've shown in a little project at work.

[@colinosborne3877]

I always enjoy watching a true craftsman. You acknowledged your mistakes and put them right. I've go some work to do on my campervan which this video has encouraged me to do myself. Thanks from the UK.

[@dogboy666ppp]

I used to be a sheet metal journeyman I installed commercial hvac not too much architectural work,watching him work his skills and knowledge make me want to be learning what he's doing.thanks you have awoken something in me.

[@comingtofull-ageinchrist6736]

I actually watched the video where you made the stump and hammer, great job by the way and fabricating those, and great job on shaping this piece by hand! I always like watching you work on stuff, because you show the mistakes as well, and that is a big part of learning for everyone! Thanks for sharing the process, Karl. Look forward to the next video my man!

[@thercbarn5001]

I absolutly love these type of videos. Some good news on my front is I am done being otr truck driver and have found a job that will be getting me home way more often! I have been working hard on getting my new shop going so I think really soon I will be getting back to my project. Thanks Carl!

[@bobbobby2113]

Someone who loves their craft...To teach and show and give one for the pain team....Much kudos to you and your team....

[@lunkydog]

This has been the best video I've seen that actually explained how to manipulate the actual tuck by closing the end.

[@groensewe]

Thank you for doing a video on basic hand tools, it is really appreciated, I know you cannot do this too often as it is physically demanding, love the content of this channel.

[@kevinobrien-sv2kr]

I never knew how this type of work is done... and the last hour spent watching you do it was amazing. Absolutely one of the best demonstration videos I've seen. You are skilled, super-competent and to the point... a great teacher. A rarity on KZbin. Cheers!

[@larryfalkin63]

You are in good company. Jessie James, Mike Petko and you. Master metal formers. Boyd Coddington’s metal former is deceased and so is Boyd, I think.

[@rickmcdonald1557]

You have the patience of Jobe and a never quit attitude and I learned much from your instruction on how to shape these panels. You also have a "Dream Shop"~!! Kudos to the camera girl also~!

[@robertluce4194]

So nice to see you share your knowledge. Can’t wait to see some other projects thru completion

[@funkiwikid6106]

Excellent job of teaching skills and editing. Nice to have gentle music instead of hammering and instant clear voice for instruction. You give all that is needed without anything that isn't. From a tradesman, it's super easy to connect with what you're doing ... your videos are right up there in the top 1%. Awesome job.

[@kenbellchambers4577]

You have given us a glimpse of techniques that have come about from hundreds of years of experience and made it simple and understandable. Undoubtedly this was one of the clearest, most well-presented educational videos that I have ever seen. Thanks for sharing. My dad was a sheet metal worker for Avro in Toronto back in the fifties. One of his jobs was to make the wing tanks for fighter jets.

[@stuartfletcher2378]

Wish that I had teachers like you when I started pounding tin ,We finished with lead , no bondo and a ton of pounding. Truly enjoyed your video. Stuart in Ontario..............

[@roopcharlie6264]

this is one of his best videos yet. Really taking it back to old school hand skills.

[@michaelguinn5736]

Morning Karl, I make a honest effort to watch each video you put out..this one was exceptional, alot of information, with anything we do with these vintage cars, experience is the key, you learn from your mistakes & how to correct them, you explain steps & procedures well...Great video!! Be safe!!! God Bless!!

[@VinylVillageGarage]

Thanks for taking the time to do it “old school” so to speak, it really puts into perspective what power tools are doing, I picked up more from this video on metal working than all the books I have read. Appreciate it! Nice job.

[@darylcross5610]

Thanks Carl for showing these fundamental metal forming methods. Awsome explanations as usual keep up the great work.

[@impiantan2617]

I am 65 from the Far East Carl, all I can say is you are young and highly potential in your field of work. Bravo.

[@Ontheroad1100]

Great video. Nice to see real hands on skills complemented with detailed advice and instruction. I'm just about to make a seat base for my hardtail chop. I have a tool box, a work bench and vice and a hammer. Now I've watched your video I feel ready to go and have some fun. Cheers

[@flatrat48]

That was impressive bro! The amount of patience u have is equally so. I also want to point out that humility is what draws us in and inspires ur subscrubers. Let's also give mad props to Christina for capturing all the subtleties to the power stance!

[@MakeItKustom]

Ha ha ha thanks very much man appreciate it!

[@seetheworldfrommyharley]

Agreed!!

[@earlforthun3838]

Yes Karl please keep the videos coming, you make this all so easy to understand you have a great gift to teach people! Thank you!

[@klausgebert5666]

This work blows my mind. The hole time I was watching I barely dear to bread and almost got sick to me stomachs. Wish I had the skills.

[@seetheworldfrommyharley]

Thank you once again! You are awesome and so easy and fun to learn with! Keep up the great work! (Great camera work too..you know who you are 😊)

[@tboyz1]

excellent video thanks for taking the time to share your knowledge and skills. you explained each step really well and increased my understanding of how the metal reacts ie shrinking / stretching and the simple tools needed to create complex curves and flanges and tipping cheers thanks :)

[@badboykid311]

I love how on his videos things don't always go exactly right and shows you how to fix or attack from other angles ... Dudes an artist.

[@spicer41282]

What I believe the rest of us were waiting for! 🙏 Thank you for making this. Please create a complete series on this No Special / Expensive tool Metal bending vids!

[@hughpenney8873]

Great video, I love your passion for the trade. I work as a millwright and sometimes have to shape metal. To break edges I use an adjustable wrench to ply the flange. They can do all thickness of metal and up to the depth of the jaws. Look forward to learning more, keep them coming.

[@aussiewendelken7499]

Thanks for the lesson bro, major talent now go rest that arm and keep up the great content, really look forward to your videos so interesting, you explain what you're doing thank you.

[@1AMERICANWORKER]

Watching you made me miss the trade and the feeling of accomplishment when you finished a hand formed part. At the last shop, where I worked with Pete Conti he was in charge of the metal working section. Our section made parts that couldn't be found or had to be custom made I would help him when the pieces were big ( We made a pair of quarter panels for a 64 Corvair with the wheel openings moved up 4 1/2 inches that left the shop with a front mounted blown small block) and he would help me when I had a big job like making the chassis for that same car. One day Pete tells me he is leaving the shop. I panicked and he gave me the greatest compliment I have ever received. " When you took my metal shaping course and we were working on hand shrinking, I was going around showing the other students how to trap the tucks. When I got to you, you were already doing it! You have a natural instinct for knowing what the metal has to do and how to move it where it has to be. You can run this shop blindfolded". I still had to build chassis, front and rear suspentions, narrow rears and such, but I really enjoyed restoring stainless and aluminum trim. That was almost 100% shop made tools. I will never forget the look I got when I went to a flea market and bought all the cheap tool guy's tack hammers, most of his butter knives, wooden salad forks, and plastic cutting boards. I ground and polished the tack hammers to whatever shape was needed, cut the blades off of the butter knives and shaped the handles and the stub of the blades to fit the shape I needed. So whatever trim came my way I would have a base to make the tools I needed.

[@jeremiahfiek5495]

This is the first video I've ever watched where I didn't get annoyed by the dozen ads. You deserve whatever money you get from all the ads. This video helped me out a lot because I've been doing this kind of shaping by making relief cuts and welding it back together. Thanks bro.

[@Mr.Safety.]

My first project trying to shape metal has been my 1994 f150, I'm a straight out of college welder, no job yet, but it has absolutely been a learning curve trying to fabricate the inner cab corners, that the actual cab corner welds to, as well as the floor pans, as they have a funky angle where the rock and the pillar meet edit: love the osb tables. Very easy to make, easy to dispose of, burn it in a barrel and collect the nails

[@johngizzi2266]

Awesome work! A great demonstration of how a lot of work, determination & a few basic tool are that's needed to create. The art of bodywork is alive & well.

[@jsmcdon1]

Thank you sooooo much. You are amazing! So talented, but still take the time to help us that “aren’t” or don’t have the tools, to do projects like this. I can’t thank you enough.

[@lancemclean9273]

Sore arm reminds you this is real work. Old school talent . Nice to remind people it’s still possible

[@AlanMilner1948]

I haven't been in a machine shop for more than 60 years but this video brought me right back there again. Metal shaping is actually a religion. Thanks for bringing that faith back to mind.

[@evolutionmonkey3146]

Another brilliant video. Thank you so much for sharing your knowledge and skills. Also great camera work!

[@ramennaidoo162]

Excellent stuff man!! Have done a lot of metal forming stuff, but you have taken it to another level which needs lots and lots of patience, well explained as well.👍👍

[@MrFunnyDad2024]

Its great that your doing it this way so people can see how to do it without alot of $$$ machines. And its great you listen to what people would like to see.

[@Jacob-64]

You have very good skill sets and your explaining as you go was excellent . Good job Karl and Christena 😊

[@Orlosthedruid]

Ive worked metal for over 40 years, this kid has skills I dream of having. He has hands blessed by the metal Gods, if you are not in total awe of his abilities, the way he thinks, the way he sees things, you are just ignorant to the trade and art. I just love watching a master craftsman work.

[@attuneu]

The paradoxical fact of force and subtlety. Very high level of skill to do this it seems. The art of seeing the result of your actions before you do them. Greatly generous. Thankyou

[@fartzinacan]

Thank you for making a video using more hand tools. It certainly does help make sense of things. And will be helpful for some of my projects that don't have replacement sheetmetal available.

[@JohnSmith-de2mz]

Excellent video, no bad language to sound hip, just talent and patient

[@jasonlarsen993]

That was AWESOME! Thanks for showing how to do this without the expensive equipment, I’m in awe. Great camera work! You showed me the views I wanted. 🤙🏻

[@larryflanigan2761]

your Craftsmanship speaks for itself!!!

[@EvilUnderTone]

Speaking as a old coachbuilder you are a breath of fresh air. Folk will learn more from one or two of your videos than all the classic car restoration shows here in the UK! even if they sat and watched all off them back to back they'd still fall short and that's just watching a couple of your videos on metal working. Well done very impressed. Take care folks.

[@salterclan]

Love it, and love that you have someone willing to do all of the videoing so you aren't spending twice as much time setting up cameras. Looks great!!

[@shanefurrh4486]

You have real quality in your work , teaching, and I assume as a overall person. Thank you for taking your time to show off your skills to teach others

[@fortunatusheidelmann1707]

This is the first video I have seen from you. I have been a locksmith for over thirty years and have learned quite a bit from you. Thank you for this.

[@WaxMeister]

Impressive job, really impressive! Also very appreciated your revealing the actual time you spent on the job!

[@alansleath604]

I think that this is your best video yet and that is saying something. Thanks especially for showing how to do it with “machines” and then how to do exactly the same thing with hand tools. Epic!

[@marlinblack6597]

Excellent tutorial. Couldn't agree more with creating your own tools. Ask a blacksmith how many hand tools they actually bought. The more tools you make. the more tools you can make and before you know it you have more tools than you can house. Once again excellent tutorial on shaping sheet metal.

[@karlscribner7436]

Another excellent lesson, Karl and excellent video production, Kristina. Learned a lot.

[@brianmurphy559]

It’s probably the best video I’ve ever seen somebody do super informative you didn’t skip any steps great job

[@BigFiveJack]

Enthusiasts really appreciate you demonstrating these methods, as well as showing us the tools that are used to perform the work!

[@dougjones4987]

After many long nights, finally I've finished my project thanks to great videos like this-I can't wait to use this new shovel of mine!

[@trevorrennebohm6488]

I always love that you show not just the more advanced tool tips but the basic handtool tips & tricks!

[@s.arepairworkshop466]

You are right

[@s.touburg4922]

Yeeez, what an amount of work Karl. Just to show us how it works. Really LOVE your videos man. I am a car mechanic trying to do metal work on my Volvo. I learned sooooo much of your videos. Really love the "only hand tools" videos. Greets from the Netherlands!

[@alaricwilli6482]

Thanks for sharing your techniques. Bringing up others with you is godliness.

[@stephengent9974]

I watched a japanese craftsman shaping metal, they use a cold chisel to score fold lines to make it easy to bend. Great video content as ever

[@i8ntnuts]

Quality work is so important when building a first class car that will be usable and last many years. Well worth the effort to develop the skills. Thank you!

[@s.arepairworkshop466]

Welcome thanks

[@bilselby223]

sound stuff, bril vid, i appreciate you two taking the time to do this, much thanks.

[@lukesnyder9816]

You really are an amazing craftsman. I try to take away as much as possible from your videos. You have so many great techniques I need to remember. Also your ability to convey exactly what you are doing as you are doing it is great. You truly are a great teacher as well. Thanks for the videos!

[@Vadik11111]

Hello from Russia! Your videos are motivating! I bought a welding and will repair my car myself👍.

[@shanes_bs2659]

Thank you for making such great videos Karl. I learn so much from each and every one!

[@MakeItKustom]

Thanks a lot for watching and supporting!

[@JHV166]

I shaped metal for 60 Plus years and I can tell you that 100% the tools you MAKE will last you your entire life. Is it nice to have expensive dollies and hammers and shrinkers/stretchers? Sure. But the tools you MAKE yourself will teach you more than any store-bought tool. And you won't be afraid to modify them or alter them to suit your needs. Great Video, Well presented and clear and concise. THANK YOU! Made my day seeing a young fellow keeping the craft alive.

[@t.l.hubbel5464]

I'm blown away at how much I just learned, watching this video. I've gotten good at many skills, but metalwork/fab has been on my "wishlist" for some years. I'm old now, and probably won't ever have those nice big power tools, but you took the time to to make a video without them and showed us that we don't have to wait, don't have to spend any large sums ......... I'm just beyond thankful that you took the time to make this video. That panel really is a complex shape, and you walked us thru it, with great camera work, you speak clearly, there isn't noise going on thruout, you showed that there is nothing overwhelming here (that's important) .... I could go on and on. Thank you.

[@ratana_music]

very inspiring video for a beginner like me. thanks for showing the way to do it without all the fancy tools. i learn so much from all of your videos!

[@timothygolden5321]

Great demo. The shrink is something I've been trying to learn. The bubble method is new to me. Looks like it works awesome.

[@michealfigueroa6325]

This was one of your best videos. TY for letting me HEAR the work being done Good advise on tools and tool making