This STUFF saved me from Rebuilding!! In-Frame postponed :) Cummins ISX-15

[@MakeCentsTrucking]

Haggai Automotive And Diesel 1228 High falls Rd. Griffin, Ga 678-688-8107 For everyone asking for the shop info. Tell em Makecents sent ya 👌

[@theo10125]

Just keep fresh oil.in that isx you will get a million miles easy got a 09 volvo isx got it at 455,000 as of today got 1151234 miles no rebuild or inflame running strong only major work replace head injectors cam rollers around 850,000 2 turbo"s and rear crankshaft seal so keep posting and gd luck on that cummins

[@deantait8326]

Same shop just truckin used in GA? I just asked him what you were doing. Now I know.... don't know why I didn't get a notification on this video.

[@vin605]

With all that work done you can do more than a million mile I'm running a isx cm870 got it with 515 now1450000 never been rebuilt just injectors turbos rear main seal I've been thru. just be on point with your oil change. Seems like you had a good mechanic worked on your truck from what I see took pride in the work good luck

[@andresr7341]

Dude you jumped the trigger lol thx 4 the info I got 996k on my isx15, I did main n rod bearings at 920k with oil pump water pump etc, anyways thx 4 the video

[@rogergoff5874]

I,m subscribed and I a. Not getting notified of his new videos either.?? I follow JustTruckin too, same thing. Don't know what is wrong.???

[@MakeCentsTrucking]

We have a Winner!! After 3 days. I originally said within $20, but i'll go with closest anyways :) Total was $6100.00. Closest guess was By garddog1108 with $6150!!! Check your comment garddog :):):):):):)

[@truckerg4010]

I have 1.5 million on my ISX never been opened up. I did the front covers 5 years ago replaced all gaskets and seals $6500 ouch. I’m think I may need an in frame before it decides for me. I only use one gallon every 5 weeks. Just in time for oil change. I have no leaks.

[@jamesbatts9015]

I'm thinking of buying a truck with 1500000 miles on it . They want $12000. What would you offer and would you buy it. It's not new so I know I will have some problems. Can you give me any advice. It's a 2005 freightliner with a Cummins engine

[@flatbedtrucker5473]

2015 cummins still going strong

[@williamcrabtree]

I work on these blocks just about everyday....they have a known issue with counter bore damage....low horsepower ISX from 430 to 475 run good....but All blocks.....and I mean ALL OF THEM have to have machine work done to correct counterbore issues......stay away from any then over 500hp....23 years machinist....

[@truckerg4010]

James Batts it’s all a crap shoot. Look underneath and all around the motor / trans for leaks. Those will hit you on the road (DOT) and it’s a warning sign. If it’s clean in general not just for sale clean, means they took care of it. I would offer less if you can, 9-10k leaves you room if something bad happens.

[@truckerg4010]

williamcrabtree not sure why you say ALL? I worked in Powertrain you can’t bore out of line and pass. They wouldn’t run out of line, they’d rattled apart. Not sure what you meant

[@johnhenry1395]

Try the Amsoil Oil-bypass system to catch more of the small particles suspended in your oil.

[@charles2359]

Probably about 6500.00 with labor and parts.. hope you and your family are doing good. Be safe and have a blessed day

[@wayneowens7059]

Im a lomg time Cummins Tech, i think you got good advise and should take you to a million plus, be aware the flywherl housing mounting gasket will eventually leak and again should be included with other repairs. If you a good tech stay with them, follow them if possible. Great vid, thanks.

[@MakeCentsTrucking]

Appreciate it man. Got a friend that had that happen last year. I had the trans out two years ago for clutch. Not sure if that gets replaced when you do that or not.

[@freddyortiz491]

Excellent video did the exact same thing last year @ 770,000ish. Minus oil restore, rods and mains. Currently at 815,000 and running strong. 14 t680 cm2350. Keep up the awesome videos

[@mr.c4381]

First time u did the bearings ? Or is this the second time around?

[@freddyortiz491]

@@mr.c4381 no it's the first time I have done any work to it I'm scheduling clutch,rods and mains and rear main seal for July. So far I use 1 to 1 1/2 gallons every 12k depending on how heavy I push it. Other than that trucks been good.

[@RedBoyDaTruth28]

@@freddyortiz491 how many miles did you have when you got the truck I'm trying to gauge ideal mileage on purchasing a used truck base on the type of engine, so I know how far I can go before I start doing stuff like this to the engine

[@TruckingWithTay]

Sounds like me, when I’m not in this truck I’m spending money. Haha great video buddy 💪

[@mikehogan6938]

We truckin mayne we truckin

[@zachmiller2521]

Two of my favorite KZbinrs here

[@TruckingWithChicken]

Jerry did my Inframe I was using a lot of oil so i used the restore oil and then got a bad leak same thing you had. The Pistons didn't look to bad at all. I Would say the total was Close to $5000

[@JustTruckin]

Great video brother thank you for the shout out bring back awesome memories seeing you drive around the shop an Lisa never let me have her Corvette LOL

[@kirkknutson998]

Sammy, you were taught right! You take care of a piece of equipment and it’ll take care of you! You can’t expect it to run to infinity if you don’t do maintenance and repairs. OK now for the price is right Sammy my bid is $15,682

[@lungelinecowboy]

You know your engine better then any of us. By sounds of how it's been running I would of done the same as you for repairs.

[@jonathanbulman1184]

$7,826.17. Thanks Sammy, I’ve been waiting for this video for some time now. I have a 2014 389 with the same motor, transmission and rears as you. I’m doing the Valvoline oil now and have about 4,500 miles on the oil. So far I’ve only had to put in just a little over a gallon witch is a big Improvement. The only leak so far is my oil return line from the turbo back to the block and to be honest I could have replaced it before but didn’t. Thanks for the update brother! Be safe out there!

[@mr.c4381]

How many miles on ur motor?

[@bigblueram86]

I'm glad you're holding out on the in-frame. I'm very curious to see what the premium blue does. I'm a big Valvoline fan. I own a Cummins 6.7.

[@bigblueram86]

In-frame

[@roundsm18]

That Cummins doesn’t share much with the ISX. They perform very different functions.

[@bigblueram86]

@@roundsm18 over head cam ISX and pushrod 6.7. It's still a cummins and both have EGR And DPF systems that eat their on waste. The functions they perform are the same, Making torque.

[@freeway100k3]

Just done the cam and bottom end in mine I’ll say you spent 7300 oh yeah did front cover seal too those damn Cummins are bad about leaking there

[@alross18058]

early ISX had problems with fretting which is the main caps moved and the bearing clearances got screwed up leading to spun bearings years ago we did rods and mains at 300,000 as routine maintenance oil is much improved now

[@royharper7426]

good day sir im isx cummins and other brands cummins im mechanic too. thank you for this video. adding to my learning. but i am now in isuzu truck

[@mmtruckingllc657]

Parts and labor $5,250.51 is my guess? Awesome video!

[@michaelwright1602]

Jerry is one of the few honest and knowledgeable mechanics left in the USA... On the horn with him right now regarding an in frame. Unfortunately, this one actually needs one.

[@rogergoff5874]

Like you..if you keep up on maintenance you don't spend time in Shop, unless something unforseen happens. But oil changes, and filters yea you should be good to go. You gonna run Local now...staying in and around Carolinas, Georgia.etc. ?? Diesel engine almost like an oil burner for heating your house. You gotta do the maintenance on the Burner!! High detergent oil cleans everything!! Good job on Eli Mae. Water pump was smart move too. Next time..put a 800 horse cat. Cam shaft in her.!!!! I'm gonna say...8500 Dollars.!! Let everybody know . Talk about your going local. What are looking at. Man you just about..Bald too. I see you got the need for speed too.!! Be Good.

[@travischrisley1255]

Wish id seen this befor now. I got a isx 450 i had the whole front cover and all done on mine about 6 month's ago only thing i dont think they did was the sensors the bearings and the dampener

[@travischrisley1255]

Mechanic i took my truck to wasnt that detailed to look through that stuff i need a tech like that in my hometown area

[@MakeCentsTrucking]

Bring it to Griffin, Ga from now on. They’ll take care of you 👊 Haggai automotive and truck repair.

[@robbalinski1606]

hell my ISX550 doesn't use a drop of oil between changes, I also change my oil as soon as its black with soot, so every 11k miles. The way I see it oil's cheap engines aren't, i'll spend the $200 changing its more often thanks.

[@jaredontiveros1277]

You did good brother . Everything you did made cents. Keep up the good work.

[@C-Los_]

Hahahahaha 👍

[@biggdogg9170]

I'll say $11,457 for all that work. At least you know that premium oil works.

[@j.r.flores8523]

With that laundry list of parts you just described plus labor and it was done in your neck of the woods, I’ll say 7850.00 give or take on the work that you have done on your truck. Be safe out there bud

[@SILENTTRUCKERKW]

I paid 1500 for the oil leak and mechanic was done like in 6 hours same day I was quoted way more by other mechanics . But my regular mechanic got it done .

[@MakeCentsTrucking]

😆😆😆

[@markmungiole6932]

My guess would be 14,500. It would have been more at Cummins authorize shop. Believe I know

[@05trucker55]

That’s a good idea not to inframe to see how far she can go cool video Sammy sweet rides too

[@willmann30]

I love the way you're wearing the mask. Trendy 👍🏾👍🏾! My guess id about 6-7K. But you'll pay nothing. KZbin revenue will cover that.

[@hdavis939]

That’s ole Haggai Diesel in Griffin GA. Done made the big time. Jerry is a jam up dude and like you said Allison knows here stuff. I had a W9 with CM2350 and kept blowing injectors and that’s who worked on that truck for me. I enjoyed going there to cut up with them but it also meant I was spending money haha. Needless to say I had that truck about 4 months and sold it. I hated that ISX. Always been a mechanical cat guy myself Ive got three trucks with the 3406 B and 2 with a 12.7 Detroit. I will say for the price and reliability you can be the old pre emissions Detroit. But keep up what you doing man love the videos, from a fellow Georgia boy... come on beeeek

[@thomasarmstrong3898]

She’ll go way over a million and half without a inframe and now that you replaced the rod and mains you just gave it another million but eventually you will have to re-ring it and new head

[@jakebrake8875]

I just spent 16,500 dollars for rebuild on 60 series Detroit because it spun a bearing on cylinder 5 so had to get block and crankshaft waiting to get ol girl back.

[@joelsolizjr.4263]

That wouln't harm it to replace crankshaft bearings, you would protect the heart of the engine.

[@volkzman]

If you wear the mask upside down does that work like a m95 demandate? Lol

[@lomparti]

Works even better if you dont wear it at all. lol

[@timmay2k]

Volkzman best bet is to wear it as a jock strap 🤣🤣🤣🤣

[@cherokeelittle4582]

I've always left the hood on to do front cover gaskets

[@kjenkins8648]

Well, actually we produce CO2 i.e. carbon dioxide. But yes, we reduce our oxygen intake by wearing these Niosh-95 masks. But not really by much. Might get a little dizzy:)

[@JimmyB55]

You sure its not monoxide I think he drinks diesel fuel. Lol

[@MakeCentsTrucking]

@@JimmyB55 lmfao

[@fdhauling5145]

Same motor, 647k miles and I have the same problem. Not a drop once it’s warmed up! With the bearings I’m guessing 14k.

[@jackmartin3603]

$5,280 I'm at 1.2 million on mine. I will get it done soon just to be safe. Glad she's running like a champ. The way the rates are you should be able to pay it off in two to three years lol. They're coming up a little bit but not much. Catch you later

[@bradradta]

9,500. I just had all of that done to my 2016 T660. I still don't have it out of shop yet....

[@MoB-hy6ft]

$8,874.43 my guess. Glad you’re getting close to rolling again.

[@alfredranger9141]

Sometimes we worry too much for things that will not happen..for reference purposes only: My 2007 cummins 475 with 1.1m miles all I have done is 6 new injectors at 99k miles just because 1 failed.

[@michaelwright1602]

You need to do the lower end, you risk ventilating your block when one of the wrist pins fail.

[@flatbedtrucker5473]

Like I said I love the catalyst from Pittsburgh power

[@Justadudeman22]

Who does your mechanic work ? Seems like an honest guy.

[@Detroittruckdoctor55]

As a truck mechanic i enjoyed your video

[@MakeCentsTrucking]

Awesome 😎 glad to have ya man 👊

[@titaangulo5774]

what type of oil do you use, and how often do you do your oil change ???

[@MakeCentsTrucking]

Mobil Delvac. Before 20k. Ideally 16-18k

[@thomaskirkpatrick4031]

Makes sense, you're in there do it. I have no idea what all that would cost, I'm gonna say $8654.64. I'm not really interested in the $100.00, when do we find out how much you actually spent?

[@Prachka1]

I like his shop. I’ve been there. Would go again if need to.

[@jerometaylor554]

I have a small leak, but I never see any on the ground it just runs along the oil pan seam which leads me to believe its the oil pan gasket. Anyway my plan is to take it to Cummins and plan from there. Just over 600k now, looking to maybe do an inflame myself.

[@bigsky33]

Change engine dampener. Its a vibration caused leak. And run a gallon of lucas with your oil youll get 800k or more b4 it gets bad enough to throw money at

[@chriswoods4233]

im gonna say $9,420. where you may have been cut some deals on parts...labor aint cheap!

[@mikemorse8592]

Sounds like you got a hell of a deal on that job. Sometimes people like to fix things until they’re broke no reason to do an overhaul if it doesn’t need it

[@moisescarrera3692]

I have 2 questions for you did you do the oil pump. And my 2nd question is how long did you run the blue oil restore for how many miles 10000 or what was it thanks in advance you have a blessed day sir. I asked if you did the oil pump because you did not list read it in your list And again thank you

[@MakeCentsTrucking]

Shimmed then oil pump to get the pressure up. I ran it for 15k miles. Normally I’d went 20k but went to shop 👊👍

[@j702100]

You put 6 dimes for the oil pump shim rawze style

[@skyewhittle8885]

I don't need $100 that bad to figure all that up...

[@MakeCentsTrucking]

Lazy lol

[@brianirwin7750]

Did you shim your oil pump with dimes, if so how many ? Good or bad results ?

[@MakeCentsTrucking]

I did but not sure how many. Pressure went from 30/31 to 39/40 psi 🙌👌 Check description and call my shop.

[@尺乇几丨卄]

So how does it work over there at the shop? Do you rent shop space and do whatever work you can yourself and pay the mechanics by the hour when you need their expertise? Most shops won’t let you anywhere near a bay for insurance reasons

[@ericsolitto4239]

I like the info I know this video is a yr old. I got 1.2 on my ISX an I want to know the name of the shop who did your work. They seemed thorough an inspection things as they go an just up selling you an keeping a good reputation out there for us O/O

[@MakeCentsTrucking]

Yes sir! Top Shelf shop 🙌🙌🙌 Haggai Truck Center Griffin. Ga 👊

[@mikegallaty7329]

Good stuff man I'm going to say 8,240.39

[@HJ-lz4dt]

Great video! I'd say around $9,170. Alot of work there bud.. 👍

[@bodyasi]

Should have replaced the oil thermostat! You were right there!

[@taylorcarr5252]

Finally... been waiting for this to come out

[@rogergoff5874]

Yea. Bought momma that new...Zero Turn...She likes that Toy !?!

[@DrivenTrucking]

Excellent video 👊🏻

[@livetoridecando]

If that has the ceramic fuel pump, you should have replaced it. If it goes out you just replace the entire engine.

[@MakeCentsTrucking]

Done when I bought it 3 year ago 😆👊

[@ForeverUnboxing]

Does Valvoline Premium would help an engine that has been “dusted”?

[@MakeCentsTrucking]

What’s dusted? De li ted? Yes. Dusted or new, it helps with carbon packing around the rings

[@tonymena3390]

My 12 isx 15 fuel pump broke the ceramic inside while driving. I replaced the pump and drove it 7hrs back. Will my engine brake later on?

[@donfroth1195]

You know you have the Mask Up Side down.. Thanks you for all the Videos.. Keep up the good job Young Man...

[@reposts8668]

Quick Question buddy. On a completely deleted isx tuned regularly for no emissions crap no crazy 700 hp tune or anything crazy just to get rid of emissions, would you pass a roadside smoke test in California even though it’s not tuned to smoke just straight piped ? Thanks in advance!

[@MakeCentsTrucking]

Not sure. i know a guy who passed in NJ with a lower score than an emission truck though. Can't say they all would

[@reposts8668]

MakeCents 10-4 Appreciate the reply . Keep them badass vids coming !

[@ruthlessracing973]

Just bought an 2016 pete 579 with the isx15 450hp how often do you change your oil and what kind do you use

[@grebilorellana320]

Hey buddy l just have a question! Does the harmonic balancer can go bad? If yes. For what reason?? And if it gos bad can make a vibration on the truck??

[@MakeCentsTrucking]

Yes and yea! They get hardened up with age. Could also be tires. Try this, with truck parked and at idle, stuck a half gal of water on valve cover. It should be pretty smooth. If it looks really rough it’s prob the balancer and maybe a over hear needed. If it’s pretty smooth, then I’d check tires and driveline bearings

[@michaelwright1602]

Cummins recommends replacing the vibration damper every 500,000 miles. There is a viscous fluid inside of the balancer, no way to really test. Once that fluid hardens, there is a possibility of it coming apart. It is rare, but does happen. Also, when replacing, the damper needs to be painted, no paint, no warranty. And it is difficult to read the timing marks on a painted damper, a rusted up one, forget it, so paint it. And your accessories and pulleys will thank you, a bad damper has a tendency of popping belts.

[@Johndada517]

Noo inframe .... pull and drop n14select plus :)

[@Lbc2707]

Is it a easy swap?

[@Johndada517]

@Lbc2707 if you know where to purchase the correct harnesses and if they have them in stock that's probably the hardest part if not you need to make your own which isn't hard at all just takes alot a time and you gotta go very slow cause if you mess up it's a sob to figure out

[@craigwatts951]

10million four hundred 52 thousand 750. 99

[@MakeCentsTrucking]

Off my $21.00!! Sorry 😂😊🤷‍♂️😂

[@scottl5585]

Doing the same thing. Just did all the seals, etc. Next oil change I'm going to use the blue magic and see. My goal is 1.25. I'm at 715 gallon of oil every 2100 before this work. We'll see.

[@craighinshaw2437]

Talk to pittsburgh power and talk to them about a dorothy filter , help keep carbon packing intake down

[@jefftrehy]

Craig Hinshaw - best $1400 I’ve ever spent. Decreased def consumption and it keeps carbon packing down.

[@MacMilly707]

2,800 is my guess. Cause your buddy buddy with them.

[@makeitpay8241]

the parts alone were that much or more

[@MacMilly707]

@@makeitpay8241 shit well bad guess then. If i win tho im going to laugh hard tho. What's your guess brotha?

[@StickNclutch]

Are you still consuming 4 gallons of oil on your isx after this job was completed ? My 2250 isx is starting to burn a lot of oil recently and high blow by, I'm considering an inframe

[@MakeCentsTrucking]

im at 12,000 miles and two qts low :) Deff worth it!!

[@jedidiah4004]

$11,431. Some good maintenance going on there

[@Detroittruckdoctor55]

With all the flaws cummins has i still wouldnt mess with another brand

[@jonathansparks7558]

Automatic 100 points for the ride-a-long on the bike

[@rodidudes1588]

$18,675.00 spent I’ll take a tshirt

[@pitbullgator]

Good afternoon Sammy and Family Hope you and your family are doing well brother 🙏🙏🙏 I’m still down here in Florida after getting laid off back on April 20th just applying and trying hehehehe 🙃 Y’all take care and be safe out there and at hope 🤠🇺🇸🇺🇸🇺🇸

[@davidgosnell2602]

I have a 2014 volvo 670 with a isx15 400st with 400 hp 1550 to 1750 fps of torque and 2 days ago i pulled 4500 pounds down 77/64 in va i lost mph on some of those hills rough idle fuel consumption like $3000 in 2 weeks any ideas the shop says everything checks out

[@cajunman2261]

I say about $5500 to $6500 for repair !

[@Vmaxfodder]

Probably just need new crank filter .

[@MakeCentsTrucking]

Not that. It has the upgraded filter 👊

[@Vmaxfodder]

@MakeCentsTrucking hope not , I have rebuilt a few perfectly good Cummins 8.3L that had too much blow by as I was told to by the boss in the Vancouver area . I told the boss it was a crank case filter before. I was not allowed to talk to the customers. Just a shameful place to be employed. A perfectly great engine, bad con artists

[@justinbledsoe3032]

How many miles did you drive with the Valvoline Restore? Did you put the engine back together with more restore or go back to standard oil?

[@MakeCentsTrucking]

Put 15k on it. No, regular now. If I still burn oil I’ll do it again.

[@ghostcat1883]

$5001.00 the price is wrong lol . I have to watch Happy Gilmore this weekend

[@jbaby215]

At least tell the new people what it might have cost without your discount from them. That would help a lot

[@penguinmater1206]

I paid 5000$ for front and back gaskets, parts and labor.

[@eliolopez7421]

Whats up brother how much will a infram cost for cummins isx 15 2350

[@MakeCentsTrucking]

They start around $18-20

[@nighttrain4569]

16,275 for everything

[@Christian-o5c7b]

The engine block is not aluminum cast-iron

[@Nobluffbuff]

Thanks for sharing!

[@MakeCentsTrucking]

You bet!

[@billtodd6509]

How long does it take for you to get to the point?

[@MakeCentsTrucking]

As long as it takes

[@billarroo1]

It always seems that way, when your not working your fixing things and spending money, Great Video THANKS William Orange county, Ca.

[@queenbee264]

My guess is $12,345

[@ehhjeep]

Sammy I would bet $7251.85. Hope it was not this bad.

[@jordanbroyles4480]

Where can I find the premium blue restore at? I googled it but just find the premium blue oil

[@MakeCentsTrucking]

call a Cummins shop and have them order it

[@jordanbroyles4480]

@@MakeCentsTrucking 104 appreciate it. Just serviced my truck yesterday. Next service I’m gonna give it a try see what happens.

[@dallen4203]

What shop do you use? My dad lives in Williamston and could use a good shop around there

[@MakeCentsTrucking]

Pinned comment 👊

[@larryrichter4486]

I would guess $7325.00 Good luck with your truck

[@ryanstaysloaded]

“Uhhhh yea bob. I see he bid $1.... I’ll go with $2 bob. Two dollars.” ....... ahh good ol price is right. I’m gonna guess $8250.

[@bababa39]

Sounds like a pricey visit to the shop. My guess is $8965