What is the Best Laser Cutter and Engraver for You?

[@DB-jx9sj]

The ink tank system appears to be much better than the cartridge system kzbin.infoUgkxciSwynMJ7PnUvvx11rewiu-yFBkZTl53 and a lot cheaper to run. The machine was easy to set up. A small point but I thought they'd be a USB cable included to help with the set up but there was none. I've been using it now for a few weeks and it seems like a good product and superior to my previous printers which were all troublesome HP machines.

[@sgginc]

Thanks!

[@makeorbreakshop]

Thanks you!

[@allmystarz7895]

This is by far the best laser cutter video I’ve seen.. I’ve been researching for weeks and was really overwhelmed. Thank you for the comprehensive reviews and including so many options for us to further review. I especially appreciate that you included a variety of price ranges as well as ease of usage - or lack there of. This is exactly what I was looking for, thank you for taking the time to put this together!

[@3flgator]

Me and my wife are thinking to start a business with a laser printer. The idea is to start doing anything that comes to mind that we might think people would love now. On that note, which laser printer would you go for and what else would say we should have in mind such as opening an etsy account? Or is there another website you'd recommend we open an account with? Truly appreciate your feedback in this new journey of ours and I hope to keep you posted along the way. Thank you for such great content.

[@LizzieWestBathandBody]

I have 34 years in the laser Business... I have seen them come and go... the likes of Epilog and Universal.... In 1991 I laser engraved the Weatherby Lazermark for them in Santa Ana CA on a 75-watt LMI ( 145K investment) then Epilog comes along and pitches the summit a 45K Boat Anchor if it was a racehorse it would still be out there trying to finish a mile race! You have to understand what Lasers can do and do not do. I hope I can purchase something again soon now that even a 100-watt cutter and engraver are less than 25K! Our Laser Shop also did acrylic we had a local shop that had at the time a 600-watt flatbed Mitsubishi and it would cut 1/2 inch acrylic like butter! Miss those days!

[@vbudico]

Thank you for this short and comprehensive intro to laser cutters. Exactly what I was hoping to find on the web

[@marcoss6212]

Very informative and well explained about choices, but the the best detail of all is the engraving of the second amendment on a Picatiny rail accessory, NICE!

[@rickspro1271]

In my research, on paper the muse 3d seemed better than glowforge, especially with the rotary height extender. But the fine print only offers 30 day warranty vs glowforge 1 year. I contacted sales to confirm this. They didn't respond back. Big red flag that lead me to other complaints about service and power supplies blow often. 30 day warranty on new gear for that cash is awful.

[@chas717]

Thank you for taking the time to make this video! You have helped me with the decision making process in purchasing our first laser for my company!

[@kmauj1]

Hi, can you recommend me a laser engraver for urns that are mode of brass metal. What we will be engraving is just the names or may be picture of a pet. Thanks

[@PeptoPoops]

was a great video to stumble upon after trying to find some honest answers on engraving as a total beginner! I diddd have a specific question, you mentioned briefly "logo on cutting board" which is my intent for one, however the unit i was looking at was kind of a box that had everything inside of it. the diode was 3w, but no one ever says "it can engrave all of these, dont get it if you use it on these". I want it to be able to do walnut, but everything always just says wood, and there are so many species of wood of different hardness, i cannot for the life of me find a simple yes. In your opinion, 3w diode able to surface engrave (maybe 1/8") walnut, and other hardwoods.

[@3dChris]

Yes

[@techno_john]

Ortur can certainly cut. But it requires multiple passes. I got the snapmaker, and it does a great job cutting, mainly because it has a Z-axis. You do have to calibrate the Z-axis height for whatever material you use.

[@makeorbreakshop]

I want to check the Snapmaker out!

[@techno_john]

@@makeorbreakshop Two additional notes for when you try this out... 1- I was getting really frustrated with cutting 2.5mm plywood... UNTIL I finally went and checked their forums and found the link at the bottom of this comment. The cutting setting they list for plywood was just right and gave me perfect cuts from then on. I did find that their plywood engraving setting was not good (100% power too much, 50% power just right), so I left a comment at the bottom for my recommended setting. 2- It's sort of a software labeling bug. In the software, when you use the engraving for a picture, and on the Dot (high quality) setting. They show the "Dwell Time" units as "mm/min". This is incorrect, and it is really "ms". support.snapmaker.com/hc/en-us/articles/360019025954

[@ericprobinson]

It’s amazing I also had a glow Forge ad in the middle of this video. Never had one before

[@makeorbreakshop]

Your not the first one to say that ;).

[@FringeWizard2]

I never see ads due to uBlock Origin.

[@Shadow_Wraith]

@@makeorbreakshop *You're

[@vanhalyn06]

@@Shadow_Wraith omg 🙄

[@lesley-annehamilton5855]

what would you recommend for cutting 3mm perplex acrylic?

[@TheMario2k7]

Have u tried the Yorahome?????

[@susanchadwick5948]

I like your videos, but I am looking for a first engraver for metal (jewelry metals). One that doesn't take up a lot of space or money.

[@Capturing-Memories]

I need to cut Nickel strips out of full sheets for Li-ion battery packs terminals, They are very custom and I made them using Solidworks, What is the cheapest laser cutter I can get on the market today that can accomplish clean cuts for a thickness of 0.15 to 0.20 mm, The work space needed is as small as 3"x3".

[@timothysherhcf7015]

Is there a way to cut thru a plexi box, but only thru the laser side and not thru the other? Something you can put inside the box? I would assume just put a block of wood that is thick enough to stop the laser from going all the way thru? What is it for? Making vents for an enclosure.

[@JohnCarver3]

Can you cover galvo lasers? For actual production/speed they are king for marking and thin material cutting (exponentially faster than other systems).

[@tomhollingsworth9328]

Did I miss the name of the blue one, the second one youy talked about?

[@cristalperez2701]

Hi.. which laser machine do you suggest to cut sterling silver sheets for jewelry making?? I read that 50 watts is enough, but i'm torn on which laser machine is best for it. Please advise!

[@craigmyers3054]

What is the best type of laser for etching glass?

[@alexdenboer7213]

So helpful! Starting up a STEM class at my school and I had no idea where to even start with ;aser engravers. I really apprechiate how you broke all this down and then went into more detail in the full review! My future students thank you!

[@dmoneyg3007]

I'm trying to engrave gun slides / pistols. What machine would you recommend? Any Link to purchase one?

[@silviugheorghe7118]

Amazin video. I got a Atomstack s10 pro 10W lasser. But because of the big size and a small apartment, I am thinking to return it and get a Laserpecker 2. But I don't know if it is the right decision because I want to start a small business and offer engraved things in different sizes but also small wood objects and the Laserpecker doesn't seem to be able to cut so well. Can you please give me your advice? Thank you for your answer

[@kennuimuffins2426]

Nice video. Wish you focused more on the higher end lasers but not really your target audience and not something you have in the shop. I wouldn't put boss anywhere near epilog. For general use CO2 lasers I would do a list like this: - K40 + upgrades - 50W ebay/ali chinese - 80W ebay/ai chinese - All in ones or what you call kickstarter lasers (including the more expensive dremel brand one) - Branded chinese lasers with local support (boss, thunder, aeon etc) - Finally top tier RF lasers (epilog, trotec, ULS etc) There's plenty of specific machines that fall outside those categories. Like aeon having an 'all in one' style series and thunder laser having RF source lasers.

[@makeorbreakshop]

Good call, I like have the category of pro style chinese lasers (like Boss) as an additional one to those on the US side (Epilog). I"ll make that update for a future version of the video!

[@GoGo-tk8ui]

Dose Epilog make great machine and after care? I just start talking to them. So far they are very helpful and sounds like they have what I need and they make quality machines in USA. Considering purchasing one of their machine for my metal and plastic work..

[@micko1404]

I'm quite happy with my Thunder laser Nova 35 but looking at a Trotec dual laser (CO2 and fibre).

[@banaalani7216]

That’s amazing! However, I still didn’t get it if I want to cut mirrors let’s say I want to get letters or names out of mirrors which one should I get? Sorry I’m a beginner and still gathering info

[@cruzflores7661]

If you were only going to do engraving on wood like cutting boards would the Chinese 40W be ok?

[@3sotErik]

I work with very large industrial Bystronic lasers. I've kinda wanted to get into it it as a hobby. I wish I could just use the ones at work for some personal projects. We use the CO2/LN2 lasers to cut through 1/2" mild steel. The new Fiber laser is used for the same parts, but is 10x faster.

[@jrc6641]

Question... over all will a CO2 engrave paint coated yeti cups?

[@nbwoodworking5411]

The atomstack X7 pro is a diode laser that is 50W it works to engrave metal without powder coat.

[@joeperez1493]

Hello and thanks for your time. Witch one you can recommend me to cut 1/4 and 1/8 acrylic in a clean and smooth way?. Thanks for the advise.

[@tomthumb8347]

Hi Could you recommend a budget laser engraver that will engrave in to metal without any issues.

[@blakkdahliaxiii1041]

Which would be best for cutting out sacred geometrical shapes?

[@anegrobler2]

Hi. I am looking for a Lazer engraver that can work on plastic, stainless steel, aluminum, iron, surgical steel. How hygienic is an item after it has been engraved and sterilized?

[@madhaviveguru1209]

Hi Sir wonderful explanation. I could not decide which brand is best and which one like how many watts etc better suits me. I am starting a textile (cutting & sewing dresses) business and I need a laser cutter and engraver that better suits to my business. Can you suggest me a good one please.Thank you again for the video.

[@ThomasSchepkens]

What's your opinion on the Cubiio 2 running on Kickstarter?

[@awill3992]

I'm looking to create acrylic stamps to use for my bakery and want to know what's best but also small to cut detailed designs into acrylic. Any suggestions??

[@IamRandomAF]

Now the top end Laser BOX is cheaper than the cheapest GlowForge is it the best deal in that style?

[@stacie3045]

Can you advise on a beginner, craft laser mainly to engrave tumblers? Not for resale items, just for customized gifts.

[@All-Is-well489]

I need wood engraver to engrave 6inch by 6inch detailed pictures. What do you recommend? Thanks

[@hectorruiz250]

Hi, I'm trying to find the best laser cutter for Extruded Polystyrene (XPS) Rigid Foam Insulation (It's that pink very dense foam - the pink panther one). Can you recommend one for a 3-4 inch thick foam and a bed size of at least 2 X 2 ft.

[@MrFiscality]

Could use some advice. Looking at the glowforge and K40. But wouldnt mind to be directed towards more industrial versions. I got a spare room, probably 2x1m left. Ability to place air assist and extract fumes through a window nearby. It's in an appartement, quite populated so wouldnt be cutting overnight haha. Planning on cutting acrylic/pmma 3mm thick plates i want to feed atleast 50x50cm plates for ease. But also want to engrave/scorch leather and woodies(multipex/plywood most likely) Maybe engrave aluminium but I realise there are specialised laser(lenses) for that particular operation. Got max 5k to spend. Looking for a ROI within a year. (Things I sell will be around €5/€25 a product, around 5000mm distance in lines per product) It's mainly hobby orientated. I want to comfortably be out for work during the day while it is running. Ofcourse I have a contact in the appartement that could keep an eye on things and unplug the field if necessary. What would you guys recommend based on my input? What might I have forgot to mention that could be detrimental for decision making?

[@ramendra6285]

What is the best laser cutter to vector cut aluminum foils?

[@amberkelley5392]

What is the best machine to engrave larger and more rounded objects like wine bottles?

[@sarahgross3678]

Can I engrave leather tags like for crochet items?

[@makeorbreakshop]

yep! Both diode and CO2 lasers will do that.

[@sarahgross3678]

Awesome thank you

[@张云瑞-k3m]

Yes sir . you can .But It's up to cut leather thickness .

[@thepeanut9556]

Great video looking to get in to engraving business as starter what do you recommend budget below 1k that will be cable on multi surface Thank you

[@rmt3589]

Do you know if any can engrave gemstones, like quartz or moonstone?

[@GoodChuteX2]

Hi. Which Laser would you recommend to cut fabric (cotton, poly, corduroy, fleece) for applique shapes?

[@alphaeuslamin6445]

Thanks for the brief description.

[@chrissyece412able]

Can you cut acrylic sheets on these laser machine?

[@ThatMomWithALaser]

Great video! LightBurn is seriously the best! I love how they are constantly improving the software to make like easier for users.

[@Light-313]

Can the CO2 ones engrave rocks like agate? How deep? and if you go over the same thing again does it engrave deeper?

[@rickprocure6321]

I just need to burn an outline of a dragon onto plywood. Do you think I can get away with the cheaper cutter? I dont need to cut out only burn a outline

[@makeorbreakshop]

Yep, the cheaper diode lasers would totally do it!

[@peterdavies2058]

What is the cheapest laser cutter would you recommend for cutting foam board effectively?

[@DarrenMalin]

I have had great results with a K40 with no upgrades. I only use it to make war gaming terrain but I have found it to be a very useful tool. I should add a air assist when I can get around to it.

[@paulvanwagoner7273]

In your opinion what would be a good laser cutter that handles a decent size piece of wood or acrylic. Most of these co2 lasers seem to handle 20x8 . I read your reviews on glowforge and muse.

[@Appujimmy]

Where can I get the ortur laser engraver. Kindly share the link to buy these

[@82zena]

This was incredibly helpful. Have you done a comparison video of the FS 3D Muse vs the Make Box laserbox?

[@MrThemodder22]

So no co2 lasers can cut metal? I’ve read that some can cut 1.2mm thick stainless steel and carbonized steel?

[@wendystewart1970]

What type laser printer would you recommend to do the cups with powder coating and etch it?

[@waterboyblue1]

What would I want to look at to cut 16 gauge copper sheets? Great informative video

[@deycrew1458]

can the ortur engrave stainless steel? like jewelry. and would you recommend it business-wise on a budget?

[@rogero9633]

Nice Video and has a lot of information in it. I want to get into a Laser Engraver but of course there is so much info to digest and make decisions on. Because of the COVID virus we have now lost the only place I would have gone to look at and ask questions about it. That is FRY's Electronics. I was going to build a newer computer with newer components. I like to buy locally and now there is no second choice place to go. The whole printing and engraving environment is changing so fast I have been deliberately slow to get involved and jump in. Would you be able to make suggestions on where to focus if I mentioned some of the criteria involved? 1) Engrave small objects like in the size of Keys, Knife handles and up to the size of 6 inches square for just a little more versatility; 2) Because of size - price should be small due to the versatility and usefulness is reduced (comparatively); 3) Precision - due to the size of the engravings they will be examined closely. 4) Engrave or etch but NOT cut through. 5) Small because of my needs and can't have it take up a lot of room. 6) Engrave any metals that will dis-color noticeably. All these are valid reasons that must be evaluated together. If you can please give me a few suggestions. Because I don't know what the prices may be, please consider price to be of the lesser requirement. I want a good one that will do the job. Thanks for your help.

[@tomsky]

just got good deal on Agnes by hurricane lasers curious of your opinion on it im totally new to it

[@prorez-retrofit]

What should I get to cut 10mm acrylics ?

[@mr.es1857]

What is difference pulse frequency on uv laser machines?

[@StrokerStevens]

What do you think of the AP Lazers? I am looking at getting one soon to start a small side business.

[@sandr1p850]

Any cheap machines to make custom name necklaces

[@Q8Patriot]

Great Video, thanks alot I watched several of your videos and noticed that you didn't mentioned Laser Pecker , any issues on their products ? should I avoid them and consider one from the list you mentioned I'm totally new to laser engraving, appreciate your help :)

[@aerial_silks_hoop]

I am still really lost. I want a laser cutter to make dollhouse miniatures in 1:12 scale at the largest and 1:144 scale at the smallest. I have a Cricut Maker cutting machine and it doesn't cut precisely and small enough which is why I'm looking for a laser cutter instead. The most common materials I would cut would be around 2mm or less, matboard to thin wood. I'm 33 but I find technology to be a little annoying. It's not my favorite thing to figure out software and do upgrades. I don't think I'm even capable. So I need something user friendly that I can use with SVG files.

[@WalterBocchini]

Is there a desktop machine that can actually cut through 2 or 3mm metal?

[@rumblinggarcia9910]

What's a good laser for engraving marble, hedgestone for example

[@dragonld123]

Which is the cheapest solution to lasercut thin MDF? Not engrave,cut it or better make precuts and then cut by pushing with hands?

[@jamaicanxhoney4218]

Which laser engraved sunglasses an eye glasses ?

[@jrbling25]

Definitely one of the better videos, i appreciate you comparing more than only kickstarter ovelty machines - I didnt catch this in the video, but any experience with Thunder Laser?

[@Dancopymus]

Conclusion: which is the best for cutting materials up to 5mm or 6mm, such as wood, plywood, acrylic? (I don't understand English correctly) Thanks

[@salmanslim]

Thank you for this informative video. I am looking to cut kaizen foam only for tool box organization, will ortur do the trick?

[@luluu8373]

What do you think about the Trotec Speedy 100?

[@shannonroberts7242]

I have never used a laser or cut wood with a laser cutting machine but I want to start a business in this area. What machine do you suggest I get? And where should I get some training or videos?😌

[@jalisco13lop29]

Hi,could you recomend a laser cutting machine for jewelry, laser star is awsone but very expensive. Looking to invest 8k to 10k ,thanks!

[@davidtube9895]

How are you there I have a question it can be writing on aluminium or a plastic

[@COLALIEN]

Can other lasers such as OMtech Co2 lasers and Ortur Diode Lasers engrave on apple products such as Iphones, Ipads, Macbook Pros ect. without damaging the internals of those products?

[@daveprice9128]

I was looking at OMTech 130watt with chiller and passthrough on all 4 sides @ $5000.00

[@williec4406]

I’m trying to figure out what to use just a cut out small things metal like for jewelry bottle openers just so you know maybe 8” x 12 x 10” whatever just something to cut smaller stuff not real big signs any advice would be helpful thank you

[@sapper2497]

I want to graver high carbon steel blades which are the best for this

[@lakeeciaposey5379]

Which one is the best to make for custom necklaces . ? 😭😭

[@alpell2547]

Very informative.... you mentioned metal..... what will laser gun receivers or slides? I'd like to do hunting scenes on shotguns and also leather goods. Suggestions? My wife wants to do tumblers and more.... thank you!

[@MrDavesbox1]

any supplliers in the USA for the ortur? the shipping delays fron China suck...

[@jkkugkmmn]

what’s the best and cheapest laser to use for clothing such as jeans and jackets?

[@earlcummings3653]

what is the cheapest laser for engraving names on small signs

[@LuLeBe]

Actually my 5w diode laser can cut 4mm plywood but I gotta go real slow with 5 passes or so. But, it works, but it's only suitable for really small stuff. I did some finger joint boxes for CNC router bits, roughly 15x10x10cm box size. Took a few hours but I just left it running so that was fine. Also a bit of cleanup work was necessary to get all parts out.

[@lardoy2509]

are the prices of ortur much higher now?

[@pamelacaton4533]

Thanks for the review, I am glad I found out that FSL is manufacturing for Dremmel before I make my purchase.

[@Halftimee93]

Which pick would you recommend for fire arm polymer stippling?

[@IronMan-yg4qw]

with the full spectrum muse, you have to buy all the accessories, like the water cooling, air exaust, and air compressor, right???

[@makeorbreakshop]

They sell at box that has all of that integrated or you would need to get them yourself.

[@NIYA424]

Can you use the ortur engraving 15w machine for brass and stainless steel metals?

[@sluuter]

Finally one good video about laser engraving. Strike to the point!

[@twmartel1166]

Light Burn

[@johnparks4724]

Love your videos! Can you tell me what laser brand and size to start a business solely engraving large wine bottles? Size range from 3” to 8” in diameter and 12” to 24” tall. I’m assuming a rotary attachment is necessary.. Much appreciated JP