Mine didn't appear to have any gunk on the plate but I cleaned it up and put it back together and it now stays green! I have very little soldering experience so I must say it was a bit terrifying to perform surgery on my childhood. Thank you for the tutorial!
@retro_boy_advance4 жыл бұрын
This explains so much about one of the GBAs I have. Thanks! I’m gonna try disassemble that power switch and clean it out
@blindsniper97944 жыл бұрын
"...say the magic words like AvE" every time I hear someone telling their camera to focus the magic words play through my head lol
@samuraispiritsx Жыл бұрын
Bro from the bottom of my heart, thank you so much for making this video. I just got a GBA from Japan and it had this issue and was driving me fucking crazy. This fixed it. I used even smaller iPhone lightning port cleaning kit that got in there really nice and cleaned all the crap out of it.
@wawanjadoel48713 жыл бұрын
Thankyou so much for the video. I already clean it, now i am not seeing the flickering red light anymore.
@noobazo85853 жыл бұрын
I fixed mine rolling the batteries just like you did at 19:19 Thank you! 😁
@makho3 жыл бұрын
clean your battery terminals if that's the case
@esotericsean4 жыл бұрын
Nice to you know watch AvE too!
@utsavjoshi91383 жыл бұрын
Uff, I was wondering why my IPS GBA LED kept switching to red after just 1 hour of gameplay on AA's. Followed this video and it doesn't do that anymore! Thank you!
@HoZyVN2 жыл бұрын
Thanks for the latest short & this video makho. Because if you I was able to fix all my Game Boy.
@metas29452 жыл бұрын
Thanks for the helpful vid. I was able to fix power led flickering on a couple gameboys this way. I used a pointed eraser instead of baking soda. Might be easier and less abrasive that way.
@makho2 жыл бұрын
Definitely, good call
@cljoe353 жыл бұрын
My issue that solved it required using a higher volt battery because my modded backlit gba is so powerful. Anything lesser than 1.5v could not handle the power of awesomeness. Saved me a lot of time taking apart that bad boy
@sneugdae9 ай бұрын
Wanted to know if you have any idea how much power to use when soldiering? Have never done soldering myself and wanted to make sure I’m using the right output. Thanks!
@makho9 ай бұрын
I usually set my iron to about 280c. The iron manages power on its own to maintain that temp.
@brenenbrown77134 жыл бұрын
Nice video! I really enjoy your content. Would you ever consider doing a video on the Gameboy Advance sp and charging problems? I have a few that won’t charge.
@makho4 жыл бұрын
www.reddit.com/r/GameBoy/wiki/repairs
@brenenbrown77134 жыл бұрын
makho thank you!
@ToniRamirez7 ай бұрын
I had a GBA with the shutting itself off problem and followed your tutorial. Unfortunately, as usual, I can't seem to do things as smoothly as you experts, and although I tried pulling the shielding with the cutter as you do in the video, the solder resisted a lot before it melted, I added flux and a little solder in order to melt it together with the old one with the hope it would make things easier, and I think I messed something up. Anyway, I cleaned the power switch and looked really clean, but I don't know if I put the shielding back the right way, I can't really see if it's in its right place -although there is enough solder for it to not move. Problem is the console doesn't even turn on now.
@makho7 ай бұрын
The shielding must be reinstalled perfectly flush. It holds the slider in place on the contacts.
@Brd-wv9io4 жыл бұрын
Do you know where I can get a replacement power switch for a Gameboy Light? Last year the plastic base of the power switch disintegrated when I tried to turn the switch on. It was weird, I felt a little resistance and then I heard a soft crunching sound so I took the back off and the brown plastic base of the switch was in little bits. I've since been looking for a replacement but I can't find one. Specifically an SMD, 2 pole, 3 position, 7 pin switch. It seems like it's possibly proprietary to the Light and isn't sold anywhere.
@makho4 жыл бұрын
It is proprietary. The only source that I know of is another Game Boy Light.
@paulturner52084 жыл бұрын
I have just done this on my one (IPS modded) - hope it stays green longer now!
@paolo.carrera Жыл бұрын
Hey, do I need to you use a particular soldering iron for this job? I have just a cheap one with not adjustable temperature but I’m scared to damage the game boy if the temperature is too high.
@makho Жыл бұрын
I would recommend a temperature controlled iron for stuff like this but if you're comfortable with the tool, you can use it. If you're new to soldering, please consider starting with a solder practice kit before taking an iron to your game boy.
@NayruSSB4 жыл бұрын
At 13:00, why would you want to fold the tabs on the switch? Wouldn't it cause more friction/wear? Also, can contact cleaner be used in place of IPA?
@makho4 жыл бұрын
In this particular case, we want more friction. The wipers (or the switch tabs) need to make solid contact with the pads on the switch body or the console will not function properly. Upon disassembly and cleaning, there is a tendency to flatten out the wiper so bending them out is a way to reverse that action. Bending them too far will cause issues but as long as it's not done repeatedly, it shouldn't cause any metal fatigue and by cycling the switch a few times, the wipers usually mostly break in. There are always exceptions, unfortunately, but I find that this works best the vast majority of the time.
@whitecypress69034 жыл бұрын
what is this cartridge your using in the beginning of the video? Can it run games and save games normally! I think thats what im looking for!
@makho4 жыл бұрын
ez flash omega. If you want one, make sure you read the manual
@sakitoshi3 жыл бұрын
just cleaned my 2 franken sp's, both assembled from scratch with new parts, one agt with 101 screen, the other ags with ips. I even added them a headphone jack. now they don't lose power when I look at the power switch weird. this could also explain why I was getting just a couple hours of battery on the ips one using the lowest and second lowest brightness when the battery is also new.
@BashoStrikes3 жыл бұрын
How bout a DMG power switch cleaning vid, or wilder yet - a DMG power switch replacement? There's nothing out there in that regard.
@makho3 жыл бұрын
DMG power switches generally don't need cleaning in my experience. There are no replacement videos because there are no replacement parts and even if there were, it's a simple through hole part. Simply desolder the old switch, solder in the new one.
@kingarthur72554 жыл бұрын
Why not just add a drop of solder to the battery bumps to make them as big as a normal battery bump? Then they would act up when you spin them would the solder simply not stick? I’d imagine you could even groove the metal first then apply a solder drop
@makho4 жыл бұрын
I already did. You can only add so much solder. A better solution is to just get better batteries, which I also did.
@ScratchY-jxjk4 жыл бұрын
6:20 how are you holding that does it not burn?
@makho4 жыл бұрын
I wasn't holding it there very long. But yeah, it does get pretty hot.
@AlexT-md9df4 жыл бұрын
Damn makho you buy some real crusty consoles. Thanks for the vid
@makho4 жыл бұрын
It's a weakness I have. I figured it would clean up nicely, but after looking at this one in person, I'm thinking this GBA is getting reshelled.
@nathandanigelis32674 жыл бұрын
In your experience, does this seller (J4U) ever try to fix their consoles prior to re-selling them? In another comment you said you like to be the "first one in there" or something, so that nobody else has mucked with it
@makho4 жыл бұрын
No they don't but since they are a reseller, they sometimes get consoles that someone else has messed with.
@OscarGonzalez-pk2en4 жыл бұрын
Hello my friend. Could some corrosion in the terminals affect the battery life?
@makho4 жыл бұрын
yes, that's why I mentioned cleaning battery terminals (or just spinning the batteries for a temporary work around)
@OscarGonzalez-pk2en4 жыл бұрын
makho thx for your fast answer 🙌🏼. I have a chinese IPS screen and I did the cleaning that you did in your video and it improves a lot the battery life. In fact, even though the red light appears in a half of an hour, (around 01:35 am in my country) the console still On after 7 hrs with Metroid Fusion Tittle Screen (09:00 am). Anyways, my question was because one of the terminals has a blue thing at the back but not directly where it contacts with the batteries. So now I’ll try to get rid of that corrosion ✨ Greeting from Chile 🇨🇱 and sorry for my english 😭
@EnjoiHunt3 жыл бұрын
Power light indicator flickers from red to green randomly on mine not shutting off on its own or anything. Just the indicator shows red with fresh batteries. And I am using normal nonrecharble batteries. I read using reachable barriers can cause this as well.
@KanyeWestLover123458 ай бұрын
I have a GBA (standard) which I IPS modded and after a couple minutes it restarts and turns off by itself. Could it be a dirty power switch or would it be the capacitors? It was working fine before the mod.
@makho8 ай бұрын
It's always the power switch.
@KanyeWestLover123458 ай бұрын
@@makho Thank you! Fixed my GBA because of you.
@hakuzeon4984 жыл бұрын
What is the 101 blue thing near power switch ?
@SoundToxin Жыл бұрын
Do you think this is worth doing to a GBA that's not yet exhibiting these issues when you pick up a new used one?
@SoundToxin Жыл бұрын
Second question: If I've got my power switch pretty clean but the top piece is missing the bent metal bit, can I just replace either the metal or top part of the switch separate from the rest? I had a dead GBA that wouldn't power on and I either lost that metal piece when cleaning it or it was already gone from the previous owner. I can power on the GBA now by shorting the contacts inside the switch, so I think the lower half is good and could still be used. I would hate to desolder it and put in an aftermarket one that probably won't fit as well (I'm seeing bad reviews for replacement power switches online).
@makho Жыл бұрын
@@SoundToxin If it ain't broke, fix it till it is. No need to clean it if your console is not having issues. And yes, you can probably just wedge something in there, the slider just needs to make solid contact with the contacts. Doesn't even need to be metal if you want to make like a 3D printed bracket that you screw in.
@FranktheTank3194 жыл бұрын
That's one dirty gameboy. I would be hesitant to touch that thing without gloves. It looked like something was living inside the wrist strap slot. Lmfao
@makho4 жыл бұрын
If you think it looks bad, just wait until you find out about the taste
@FranktheTank3194 жыл бұрын
@@makho you tasted it? Lmfao
@tommylyeah4 жыл бұрын
Thanks for making this video.
@sipahi613 жыл бұрын
Great video thanks, very helpful, subscribed.
@spedtron4 жыл бұрын
Just the video I need! Thanks! 😄
@Malisteen3 ай бұрын
Found my old, busted up sp, fixed it up with new shell, ips screen, and battery... miserable battery life. One hour to red light, not quite three to dead console. Add maybe an extra half hour to both if using og cartridge instead of flash cart. I thought I just got a dud battery, so I got multiple new ones from more reputable sources, same story. tried this today, fingers crossed it fixes things... though I'm not holding out too much hope as the switch wasn't that dirty inside once I opened it up, & cleaning didn't make much of a visual difference.
@Malisteen3 ай бұрын
Well, there was some improvement - went from about a 3 hour battery life to a 4 hour battery life, with most of the increase while the light was still green. Significant improvement, but it remains pretty far from the minimum of I'd call acceptable for a pocket handheld. Still, 33% improvement's not nothing. Maybe I'll go back and try again with the baking soda. Very much appreciate this old video showing me how to do this. Years later & still helping.
@makho3 ай бұрын
@@Malisteen I mean, if that's the original battery, it's over 20 years old. The estimated service life on most lithium batteries is like 3 years.
@almarkowbender3 жыл бұрын
While trying to remove the shielding my entire power switch decided to lift off the board as well, and interestingly it looks like the copper plating delaminated from the board and was still attached to the legs of the switch. Should I just junk this board or is it repairable?
@makho3 жыл бұрын
it's probably repairable but even if it's beyond your ability you can still sell it (coincidentally, I am looking for boards like this)
@almarkowbender3 жыл бұрын
@@makho I thought about finding a board schematic and running my own power wires from the switch to traces on the board but you definitely have more experience and video making capabilities. I'd be happy to send it to you, and hopefully whatever comes of it helps someone in the future.
@dmitrylukashenko61564 жыл бұрын
Good content, bro Keep on doing it :)
@gcz-zy9ix4 жыл бұрын
I fixed 2 gbas priced at $20 each (from the same seller you got yours from) all it took was ipa to the power switch
@ancientviewer19863 жыл бұрын
my sp it was the battery contacts. OG battery still lasting more than 4 hours
@makho3 жыл бұрын
It should last a lot longer than four hours.
@NayruSSB4 жыл бұрын
A kit making noises at 12:05
@Hightower2804TP Жыл бұрын
Can this issue also occurr on the GBC?
@makho Жыл бұрын
every GB
@stinkinroger1593 жыл бұрын
Oh my god you are so rough with that switch. I give it a bit of a rub as you did (little lighter) then get some wet&dry (very fine sandpaper) and give it a GENTLE rub just a few times back are forth on the metal plates and a tiny bit on the tip of the arms on the switch