Making 3 Different Wooden Cutting Boards at the same time!

[@pctips4all]

Absolutely gorgeous boards!!! Thank you SOOO MUCH!

[@paulsimmons390]

I liked your fast job of showing your work. It made for a great presentation. your work is excellent also loved your handles

[@derekdodson5623]

Creative ideas. Thanks

[@siding8]

Really cool designs. Just made 5 basic cutting boards this weekend for Christmas gifts. Wish I would have seen this vid Friday instead of Sunday night 😂

[@maderastudio8493]

Nice job. Beautiful cutting boards!

[@to5msheppard]

Great video... your pieces turned out great... Thank you for sharing..

[@tylerbug2009]

This was the first of your videos to pop into my feed. I have since subscribed and watched a handful of your excellent videos. Great job.

[@bitsofwoodworkshop9393]

Thank you, glad you enjoyed!

[@kandiecandelaria3134]

Very nice

[@debiallen4053]

Beautiful!

[@ruthkamau6334]

Lovely video, love your work. What is the gadget you have used to brand the wood? Could you put up a link for it

[@Lutzboater]

A great fun video and some nice cutting boards. Enjoyed it immensely

[@bitsofwoodworkshop9393]

Thanks so much!

[@pinkeye00]

2:51 I see that dust collection is out of this world. :)

[@ProductDesignOnline]

Great work! Keep making videos!

[@bitsofwoodworkshop9393]

Thanks, I'll do my best!

[@nelsoncaraballo9446]

Love the sent of sawdust in the morning. Sanding that is! Great vedio. Thank you for sharing.

[@bitsofwoodworkshop9393]

Couldn't agree more! Thanks!

[@undergroundchuckeytennesse2526]

enjoyed the video, loved the pace and the sound effects too. We craft cutting boards and cheese boards from rough sawmill lumber, always watching for tips on making our boards better and more attractive. Loved the designs. Subbed thanks for sharing. Oh, it looks like you use a board with nails protruding thru to use as a sanding stand. You must have a light touch. We sand from 80, 120, 220, 600, 1000 and 2000 grit. Last three are all by hand, really produces a glass-like finish but it is labor intensive. Really enjoyed video. Look forward to watching more when I can.

[@bitsofwoodworkshop9393]

Thanks! I'd love to see one of your cutting boards! I actually only use the nail boards for applying finish when I want to do both sides of the work piece at the same time. I sand on an old floor pad. I actually made about 15 more boards all different designs right after this video. I didn't film the build but maybe I'll put some cool ones in an upcoming video somehow. Cheers!

[@StuffUCanMake]

Great work!

[@wood4nothing284]

Cool chopping boards love the designs. Cheers Tim from Wood 4 Nothing

[@bitsofwoodworkshop9393]

Thanks!

[@Comerelaxandlearn]

Awesome video. Where did you get your stamp?

[@bitsofwoodworkshop9393]

DainaNEric Fernandez kzbin.info/www/bejne/kITbiZ2bnquegKM

[@SirAndyJanvier]

What router bit was that you used for the circles you made with the handheld router?

[@bitsofwoodworkshop9393]

Just a round over bit. 1/4 inch I think

[@davidnielsen4490]

Nice job.

[@BradLobregt]

Awesome video

[@chrisdaniels9718]

4am start :D How did you make your branding iron for your logo?

[@bitsofwoodworkshop9393]

kzbin.info/www/bejne/kITbiZ2bnquegKM

[@SparkeyDogfish]

Nice designs And nice work. Where did you get / make the branding iron?

[@bitsofwoodworkshop9393]

Thanks! kzbin.info/www/bejne/kITbiZ2bnquegKM

[@kleraudio]

Wow what an amazing video! Is your shop heated, or just that radiator? I'm missing the shop in this 20 degree weather!

[@bitsofwoodworkshop9393]

Thanks! I just heat it with the electric oil radiator. It’s pretty well insulated so it doesn’t take much to get it warm.

[@RMTRiciclArteeGrigliArte]

Great job. I would like to know what type of oil you use to cure wood and what wood you used for work. Thank you.

[@bitsofwoodworkshop9393]

I use butcher block mineral oil I picked up at my local home store to treat the boards. It's what it's for and works great. These boards were made with maple and cherry. Thanks for watching!

[@RMTRiciclArteeGrigliArte]

Thanks you

[@RMTRiciclArteeGrigliArte]

Excuse me, butcher's mineral oil? How would it be?

[@bitsofwoodworkshop9393]

Watco Butcher Block Mineral Oil& Conditioner is exactly what its called if you'd like to look it up

[@longbranch100]

What type finish did you use

[@bitsofwoodworkshop9393]

Mineral oil

[@longbranch100]

Thank you

[@eltonroberts8817]

4am ? Couldn't 😴 sleep

[@claudeporter1515]

Hey love the videos, nice work. What’s the stamper you use that has your logo on it ? Where do you get one?

[@bitsofwoodworkshop9393]

Thanks! I made the branding iron, here's a link to the vid. kzbin.info/www/bejne/kITbiZ2bnquegKM

[@negro1qa2ws3ed]

which type of wood did you use?

[@bitsofwoodworkshop9393]

Mostly cherry and maple I believe

[@АлексейБ-в2э]

отличное видео с креативным монтажем, смотреть интересно и весело.

[@edt765]

I have made a couple cutting boards and have run into the same problem. Every time after a little time, the seams of the glue up will have the slightest ridge. I have sanded and smoothed and waited with no raised seams then after a week or two they show up. Any suggestions to not have this happen? Oh yeah I subscribed too haha

[@bitsofwoodworkshop9393]

What kind of wood are you using?

[@edt765]

@@bitsofwoodworkshop9393 man I am sorry for not responding sooner. things have been crazy. I was using walnut and maple and cherry

[@Liquid_Haze]

What's the finish you used @bitsofwood

[@bitsofwoodworkshop9393]

I use mineral oil then once dry a mineral oil beeswax paste.

[@lawrenceshick3520]

Nice job👍 but you need to lay off the coffee 🤣

[@aviukehie1991]

Man! What glue did you used??

[@bitsofwoodworkshop9393]

Food safe water resistant wood glue. Titebond lll and I believe gorilla wood glue fit the bill.

[@aviukehie1991]

@@bitsofwoodworkshop9393 thank you alot

[@buckeyewoodshop]

Very nice!...subbed!

[@bitsofwoodworkshop9393]

Thanks!

Parabéns ganhou um inscrito 👍👍👍

[@borys2730]

Super 😁

[@vivekkhavnekar]

Excellent but one doubt, glue shall never b chemical glue.It must b of edible flour or joints made with wooden pins. No Polish shall b applied for finishing.At the most linseed oil, so that wood will not rot before sale.

[@bitsofwoodworkshop9393]

Thanks for taking the time to watch and comment! I appreciate the input👍 No one wants a rotten cutting board😳

[@vivekkhavnekar]

I must also mention that vdo was really really good.,good explanation,work done with accuracy,tools used of highest standards, great skills,work of grade1.Keep it up.Expect many such vdos.Always wish u the best.Thnks again for sharing.

[@pinkeye00]

1:51 @davie504 slap bass (wood) and subscribe!

[@mld962]

You dont have any neighbors?? Nice cutting boards.

[@bitsofwoodworkshop9393]

Haha, I'm actually out of town on a few acres. Nice to be able to do whatever I want anytime I want and not bug anyone 😁 Thanks!

[@mld962]

@@bitsofwoodworkshop9393 indeed, i love to work at night in my workshop, but i got neighbors around me...

[@ДмитрийСтаничник]

Класс !!!

[@cpeterson877]

If you're going to 3x speed the whole video why bother.