Making a Coil Pot - LIKE YOU'VE NEVER SEEN!

  Рет қаралды 13,385

Little Street Pottery

Little Street Pottery

Күн бұрын

Пікірлер: 84
@remmary100
@remmary100 2 жыл бұрын
This is exactly why I can never throw anything away. Just in case I need to make a “coil master 2000“. Great creativity!
@annruel1982
@annruel1982 2 жыл бұрын
Hahaha, you made me laugh remmary! That is why I have practically a whole craft store in my garage, haha.
@franakoudelka2615
@franakoudelka2615 2 жыл бұрын
Hi Ann... did you use the entire 8ft? This is so great
@annruel1982
@annruel1982 2 жыл бұрын
@@franakoudelka2615 Hi Frana. Yes. We used the entire 8 feet. It was enough for approximately a 5 inch mug or perhaps a little bigger.
@steveruel3175
@steveruel3175 2 жыл бұрын
This is very well done and enjoy the creativity along with the music...not to mention the incredible skill Anne demonstrates to producing the cup!!
@annruel1982
@annruel1982 2 жыл бұрын
STEVE!! Great to hear from. you. I am glad you enjoyed it. Jim and I definitely teamed up to figure out how to solve the challenge just to make the cup and then of course Jim got very creative with his editing and music. which really makes it entertaining. Thanks for watching!!
@jillwazstudio
@jillwazstudio 2 жыл бұрын
So clever!!! Lots of fun to watch your shenanigans!
@annruel1982
@annruel1982 2 жыл бұрын
Hi Jill!! thank you so much!!! This was a fun challenge!! Have a great day!
@pattrull9387
@pattrull9387 2 жыл бұрын
You are a very patient person! Fun idea!
@annruel1982
@annruel1982 2 жыл бұрын
Haha!! Hi Pat! It was fun putting our heads together to solve the problem. We had fun doing it.
@pattrull9387
@pattrull9387 2 жыл бұрын
@@annruel1982 I loved the end result and thought y’all’s Coil Master 2000 was high tech 14th century perfection! Great job!
@potteringaroundtheworld823
@potteringaroundtheworld823 2 жыл бұрын
Great and funny idea 👏🏼👏🏼👏🏼😁😍
@annruel1982
@annruel1982 2 жыл бұрын
@@pattrull9387 hahahaha, too funny Pat!! I guess as high tech as a toilet paper dispenser can get 🙂. Have a wonderful day!
@annruel1982
@annruel1982 2 жыл бұрын
@@potteringaroundtheworld823 Aww..thanks so much for watching!!!
@darlink57
@darlink57 2 жыл бұрын
Excellent video! I loved the humor and the detailed instructions. Now I need to try this…
@annruel1982
@annruel1982 2 жыл бұрын
Wonderful!! It was a lot of fun to experiment with. Go for it!! Im sure you will be able to think of a different more elegant way of doing it!!
@cariadwales1979
@cariadwales1979 2 жыл бұрын
Very creative idea!! Brilliant!! Perhaps I could use one of those wooden paper kitchen towel holders (so the wall mount is the base) and cardboard roll as a coil master.....
@annruel1982
@annruel1982 2 жыл бұрын
Oh my gosh, yes!! Great idea Cariad!!! perfect!! Give it a go. Thanks for watching!!
@xm3364
@xm3364 2 жыл бұрын
Oh...Reminds me of noodles making! With repeat tossing and hitting the dough against the table, it eventually splits and produce multiply noodle threads-like coils! Will try out on clay dough. lol.
@embee7434
@embee7434 2 жыл бұрын
Oh Ann... I love your sense of humor. Just got to blowing up the scale and you've already improved my day...
@annruel1982
@annruel1982 2 жыл бұрын
Haha!!! Of course that was a Jim idea. He had a lot of fun editing this one. 🙂. Thanks for watching Em!
@embee7434
@embee7434 2 жыл бұрын
@@annruel1982 Gotcha! I just love both your dynamics and how it always looks like you're having fun with the videos. It's a pleasure to watch. Thank YOU!
@annruel1982
@annruel1982 2 жыл бұрын
@@embee7434 You are so sweet, Em!!
@katharinelloyd5293
@katharinelloyd5293 2 жыл бұрын
Indeed, Revolutionary!! 🤓👍
@LuuBiLu
@LuuBiLu 2 жыл бұрын
Love your fun and interesting inventive ideas ! Always a pleasure to sit and relax with a smile 😊 thank you Anne . Jim’s new invention is very inspiring!
@annruel1982
@annruel1982 2 жыл бұрын
Hi Lou. Thanks so much for the kind words. and we appreciate you watching. Im glad you enjoyed it. We had fun solving this challenge. 🙂
@evangeliemourouti
@evangeliemourouti 2 жыл бұрын
Well… I am speechless ! What a genius idea! Congratulations Ann!
@LittleStreetPottery
@LittleStreetPottery 2 жыл бұрын
Glad you like it!
@jonispeirs2933
@jonispeirs2933 2 жыл бұрын
You have the patience of Job, and the imagination of DaVinci! So cool and clever.
@hayleyboisseau3893
@hayleyboisseau3893 2 жыл бұрын
Love your music selection on this one
@annruel1982
@annruel1982 2 жыл бұрын
Hi Hayley. That of course was a Jim thing. I thought it was. a perfect choice too. It really fits with our experiment.
@mainacht3509
@mainacht3509 2 жыл бұрын
Lol. Love the creativity. Jim should file a patent for the “coil master”.
@sheilacarroll3981
@sheilacarroll3981 2 жыл бұрын
😂 You made my day. DCT should have an extruder contest
@KatanaBart
@KatanaBart 2 жыл бұрын
I love extruders! Although I know the good ones can be a bit pricey. The local hobby store often sells smaller hand-held ones, or you can DIY it with a caulk gun. For something spectacular, try braiding thinner coils. Maybe even try adding some color into individual strands. Thanks for your hard work and beautiful results!
@annruel1982
@annruel1982 2 жыл бұрын
those are such great ideas Katana!! Love those. I am going to have to try making one of those do it yourself caulk gun extruders. that would definitely be a challenge.
@chrisp7548
@chrisp7548 2 жыл бұрын
Love it! Your narration was great! The pot turned out great!!
@annruel9142
@annruel9142 2 жыл бұрын
Yeah! Thanks so much Chris. We appreciate you. watching
@micheledickey4066
@micheledickey4066 2 жыл бұрын
How fun!! And I absolutely love the end result. Would have never thought of doing this.
@annruel1982
@annruel1982 2 жыл бұрын
Hi Michele! It was fun brainstorming about how to solve this challenge for sure. The Diamondcore hand extruder and the Coil Master were the keys to making this idea work for sure.
@micheledickey4066
@micheledickey4066 2 жыл бұрын
@@annruel1982 I see that very much so!! It was a great bunch of ideas!!
@annruel1982
@annruel1982 2 жыл бұрын
@@micheledickey4066 Thanks Michelle! We really appreciate you watching.
@micheledickey4066
@micheledickey4066 2 жыл бұрын
@@annruel1982 You are so kind! I enjoy learning from you!!
@annruel1982
@annruel1982 2 жыл бұрын
@@micheledickey4066 Yeah! Thanks Michele!
@deborahdanhauer8525
@deborahdanhauer8525 2 жыл бұрын
I loved this as I do everything I’ve seen you do. The “Coli Master 2000” was a stroke of genius. The only thing I might have done differently would be, since I already had that long coil with a trough in it, I might have added a different color clay in the trough and see what could be done with that as well.🐝❤️🤗
@annruel1982
@annruel1982 2 жыл бұрын
Hi Deborah. thank Jim for the genius idea!! I like your idea of adding the colored clay. that would be so cool!!! I like how you are thinking.
@deborahdanhauer8525
@deborahdanhauer8525 2 жыл бұрын
@@annruel1982 You’re welcome, I hope you can use it sometime. Thank you Jim!🐝🤗❤️
@embee7434
@embee7434 2 жыл бұрын
Cool idea!
@deborahdanhauer8525
@deborahdanhauer8525 2 жыл бұрын
@@embee7434 Thank you!🐝🤗❤️
@sandybachmann8673
@sandybachmann8673 2 жыл бұрын
Great experiment! And Coil Master! A nice idea would be to take the top end of the coil and instead of trimming it down flat, just bend it down to creat the handle from the same piece of coil.
@LittleStreetPottery
@LittleStreetPottery 2 жыл бұрын
Yeah, great idea...may have to try that as one continuous piece! Thanks.
@mavisdavisify
@mavisdavisify 6 ай бұрын
You are so clever! Great idea.
@janhuisking1170
@janhuisking1170 2 жыл бұрын
Brilliant!
@annruel1982
@annruel1982 2 жыл бұрын
Thanks so much Jan!! I appreciate you watching!
@LuuBiLu
@LuuBiLu 2 жыл бұрын
Thanks
@annruel1982
@annruel1982 2 жыл бұрын
Aww....thank so so much Lou!! You are awesome!
@annruel1982
@annruel1982 2 жыл бұрын
Be on the lookout as we will feature you at the end of one of our videos and Jim will bestow upon you an official Little Street Pottery team title 🙂
@louisegibbon5472
@louisegibbon5472 2 жыл бұрын
Oh blimey !!! Now that would be a privilege I’d be proud of from across the pond !!!! 🏴󠁧󠁢󠁥󠁮󠁧󠁿 🇬🇧
@annruel1982
@annruel1982 2 жыл бұрын
@@louisegibbon5472 Love it Lou!!! Hello from Florida 🙂. How exciting
@linzajchowski1803
@linzajchowski1803 2 жыл бұрын
Brilliant and fun
@annruel1982
@annruel1982 2 жыл бұрын
Thank so much Lin!! Im glad you enjoyed it
@beatricetreadwell5785
@beatricetreadwell5785 2 жыл бұрын
Another terrific video! Instructional and humorous! ❤️✨✨✨✨
@elizabethwatson71
@elizabethwatson71 Жыл бұрын
I would have curved all that clay back around the table so I could pinch it back into another coil and make a plate to go with that cup. A nice little curled cookie plate. Flatten the bottom but leave the top ridged. Glaze it well with food safe glaze and this will be a cute little ‘after school dessert combination’. Congrats on the record.
@kathleenfreeman1696
@kathleenfreeman1696 2 жыл бұрын
You are a hoot and my hero :0) How long did it take you to make this, and how did you keep the clay from drying out? This was great.
@LittleStreetPottery
@LittleStreetPottery 2 жыл бұрын
The whole process was about 3/4 hour to build it and I did have to apply water periodically and compressing the clay to keep it from drying out. Once the coil was extruded it stayed pretty wet.
@ninelmarkovic3093
@ninelmarkovic3093 2 жыл бұрын
That is great 👍 !
@annruel1982
@annruel1982 2 жыл бұрын
Thanks for watching Ninel and for the kind words.
@walkerpottery9296-Natalie
@walkerpottery9296-Natalie 2 жыл бұрын
Jim’s special effects and the “Coil Master 2000” as well as your master coil skills made for a very entertaining video this week! What a fun experiment! The tongue on the DiamondCore tool can be adjusted down just by loosening the screws on the side. You probably knew that already, but just in case you didn’t. Now…..for my genius idea on another way to make this project…..a home made pasta making machine! Fortunately the Arcobaleno AEX18 model will hold 15-20lbs at a time and will only run you about $6259! 😮You might need to purchase a custom attachment to make “noodles” (aka coils) that are thick enough to withstand rotating around the Coil Master 2000 without breaking. 😂 Keeping my fingers crossed 🤞🏼 that the best idea submitted might just win themselves their very own autographed Coil Master 2000!!! 🎉🎉🎉 You guys are the best!
@LittleStreetPottery
@LittleStreetPottery 2 жыл бұрын
Thanks! Perhaps Elon Musk is watching and will send a "Buy Me A Coffee" for $6259 and we can purchase that AEX 18. Love the idea!! Thanks!
@walkerpottery9296-Natalie
@walkerpottery9296-Natalie 2 жыл бұрын
@@LittleStreetPottery ha ha ha! Right?! Or Jeff Bezos - 😂 A clay extruder would be much less expensive and more practical I suppose. 🤣
@KatAtkinson
@KatAtkinson 2 жыл бұрын
This is so cool!
@annruel1982
@annruel1982 2 жыл бұрын
Hi Kat!! Aww...thanks so much! I am glad you enjoyed it!!
@patspotpage
@patspotpage 2 жыл бұрын
Cool idea! Jim is a genius. 😄 I think I would have cut each coil instead of spiraling them, and have even layers, like bangle bracelets. Either way, it's a fun project! Thanks for sharing!
@annruel1982
@annruel1982 2 жыл бұрын
Hi Pat. I can see that in my head. That would have solved the problem of the non-flat foot and rim for sure. The only thing for me would be the connection points at each coil. My porcelain doesnt like them and tries to warp. I was wondering if this project would warp in the firing, but to my surprise it was round when we took it out of the kiln...... I say go for it Pat!!
@jackscourage
@jackscourage 2 жыл бұрын
where can I buy a coilmaster 2000?
@LittleStreetPottery
@LittleStreetPottery 2 жыл бұрын
Soon to be available...we're negotiating now with Ron Popeil and Ronco. :)
@aburk8417
@aburk8417 2 жыл бұрын
Makes me want to go to Dairy Queen 😄
@annruel1982
@annruel1982 2 жыл бұрын
Hahahaha!!!! Now that you mention it, I can see that especially at the segment where Jim pans the coil up and down. I wondered why that made me hungry, haha.
@marisamoralesbaeza9299
@marisamoralesbaeza9299 8 ай бұрын
Muy ingenioso
@2manycatsforadime
@2manycatsforadime 2 жыл бұрын
let your clay get to leather hard then cut the ends flat
@annruel9142
@annruel9142 2 жыл бұрын
Hi Bob. You are right, cutting would have been a lot easier at leather hard. Good thinking.
@christinehannemann2445
@christinehannemann2445 2 жыл бұрын
Der Aufwand ist viel zu gross, um dieses Ergebnis zu erzielen
@annruel1982
@annruel1982 2 жыл бұрын
Hi Christine. Perhaps, but it was a challenge that we set for ourselves purely for fun and as we didnt have a wall mounted extruder, the solution was the best we could come up with. Besides it really is a cool mug in the end 🙂. thanks for watching anyway and it is nice to talk to you.
@shirleycirio6897
@shirleycirio6897 2 жыл бұрын
O G... but also, ooooh geeeeee........😉
@tonysmith8779
@tonysmith8779 Жыл бұрын
Don't get me wrong I really liked the Project but it really wasn't a coil just because it was cut in half it was only half a coil
Thank you mommy 😊💝 #shorts
0:24
5-Minute Crafts HOUSE
Рет қаралды 33 МЛН
Their Boat Engine Fell Off
0:13
Newsflare
Рет қаралды 15 МЛН
Throwing thinner pottery plates using roofing felt- new technique!
6:18
Pottery By Mollika
Рет қаралды 16 М.
Decorating Pottery Using GELLI Plates!
8:52
Little Street Pottery
Рет қаралды 40 М.
5 Fresh Texture Ideas for Pottery!
13:57
Little Street Pottery
Рет қаралды 28 М.
5 Ways to Use Nature in Pottery
8:25
Little Street Pottery
Рет қаралды 40 М.
Throwing and Altering Pottery - Fruit Bowl
13:42
Tony Lockhart
Рет қаралды 1,9 М.
How To Hand Build The Perfect Mug
16:13
Little Street Pottery
Рет қаралды 109 М.
The 25 BEST Pottery Texture Tricks!!
12:43
Little Street Pottery
Рет қаралды 129 М.
Home Made Ceramics Decorative Tools
8:57
Jeff Pabotoy
Рет қаралды 155 М.