Definitely have to account for the cost of glue and finishing materials.
@davexb65958 жыл бұрын
Yes plus a fraction of the investment in tools and workspace.
@bearwoodcarpentry7 жыл бұрын
Cherry Mancuso post some projects you have made please.
@iveco5557 жыл бұрын
If we are talking about EBIDA, than cost of materials + fix costs (utilities). For a project of this size they are to small.
@bigpopasmurf6 жыл бұрын
i recommend lots of things to lots of people ;p not sure on the value of the info though. in my experience when your learning you spend a lot on consumables till you know what you actually need, not an ignorable expense.
@hungryboy2466 жыл бұрын
Did you purposely leave out the T in EBITDA? Asking for a friend. Taxes suck though, to be sure.
@soulphish489 жыл бұрын
I absolutely love that you included a price tag, and cost price! This is so rare, and exactly the info I want! Great show!
@dstarr38 жыл бұрын
I feel like the title of this video should've been "Make a cutting board in 20 minutes, in 5 minutes."
@CelticSaint7 жыл бұрын
I have watched a bunch of woodworking videos tonight, and they've all been impressive. One thing in common throughout them all however, is that all the carpenters appear to have tens of thousands of dollars worth of machinery. How anyone could emulate what they do, or hope to get the same results, with little or no expensive equipment is.... impossible.
@MakeSomething7 жыл бұрын
+DEUS VULT woodworking is expensive!
@IllegalTacos7 жыл бұрын
I just finished a cutting board today - im looking up methods of finishing the wood now. I have a crappy $100 table saw, $300 planer/thicknesser, $15 glue, a cheapo $20 set of clamps and a $50 random orbital sander. That is literally all I used. If you're precise enough with your cuts and glue-up, you may not even need the thicknesser, you could probably get away with a hand-plane! Not impossible at all!
@seanloughran67147 жыл бұрын
Check out Steve Ramsey, Wood Working for Mere Mortals. He does everything usually less expensive and even gives options for even cheaper options. That being said, all of this could be done with hand tools, but it'll take you a lot longer!
@SonnyCider7 жыл бұрын
I know what you mean. The high-end tools do make it easier, I was just lamenting my Black and Decker jigsaw from 1980, means I cut it wide and sand allot more, if your willing to take the time, the same results are...possible
@audiomonkey177 жыл бұрын
OMG I was just laughing out loud and thinking the same thing! Cutting board in 20 minutes... if you have all the top-of-the-line equipment, include a planer that's basically as fast as a paper shredder. I mean, props to this guy, but I have a circular saw, a hand planer, and some clamps... so this was not remotely helpful.
@renierbonthuyzen97037 жыл бұрын
Just letting the glue dry takes more than 20 mins. Ha ha ha
@mr.mickles4 жыл бұрын
"That is if you don't count the time it takes for glue and finish to dry." It's right there in the description.
@IPOMonster4 жыл бұрын
And reading takes a lifetime for some to master...
@winterattack84624 жыл бұрын
Especially with wood glue
@DIYTyler10 жыл бұрын
Splendid! Was going to ask you where you got your hardwood since we are too far away from each other but you beat me to it!
@brucewilson27634 жыл бұрын
You’re right....once you take out all the parts that take a lot of time, it only takes “20 minutes” to make a cutting board.
@ZacHiggins10 жыл бұрын
That cutting board is a tank! I love that design. You should add a vice to it, could find a great home in a niche market. I want to see you dovetail some vegetables together on it! Great job on the video & especially the music, you've inspired me to add some conga to my next video in your honor.
@MakeSomething10 жыл бұрын
Hahaha! Thanks Zac!
@MultiDanzig6 жыл бұрын
Zac Higgins Aq
@stubryanfull10 жыл бұрын
I really like this videos format of making a profit from your craft.
@MakeSomething10 жыл бұрын
Thanks! I want to do more like this but many times I'm pulling lumber out of my scrap pile so I'm not always sure how much it's worth.
@jaredschmidt4419 жыл бұрын
Drunken Woodworker I know that this is an old comment but one way to do it might be by the board foot total that you are using at the start for each type of wood. That way people can adjust the prices based on their local supply houses and their prices for different wood species! Great stuff as usual!
@zethreal32199 жыл бұрын
Jared Schmidt Since it's 2" thick, I'd guesstimate that he bought 2"x4"x3ft in Walnut ( he makes 2 1ft marks for his cuts ). The Maple looks to be about 1"x3". 2 feet needed. Using this rough "guesstimate" from the video, it comes to 2 board feet of Walnut and 0.5 board feet of Maple. Since this is all fuzzy math from estimates, it may be wildly off, but it's better than nothing, I guess.
@nthngtoloseaudio84004 жыл бұрын
Only 5 sec glue drying time? Where can I get that? 😂
@B4Time10 жыл бұрын
Inspired me to "Make Something" namely these for Xmas presents. Thanks bro! Wife says the angled cut makes it easier to pickup instead of having board sit completely flat on the counter. Cheers!
@MakeSomething10 жыл бұрын
Thanks!!
@jeffstanley45938 жыл бұрын
Nice, but if you get to close to the edge that board is going to flip and you have a sharp knife in your hand. Potential problem. Plus, end grain is the way to go.
@MakeSomething8 жыл бұрын
+Jeff Stanley We've been using the board for 1 year now and nobody has been hurt yet. Also endgrain traps bacteria. That's why endgrain cutting boards are illegal in commercial restaurants. :)
@rabbit_holed9 жыл бұрын
I would kill to get that much walnut for that little $$.. As well as the maple! Closest store or place to be that has walnut, Home depot which sells it a 7.89/lf yeah.. no BF -- LF!
@dewrus21538 жыл бұрын
+MN_Shooter Me too! I actually bought some walnut just yesterday that looks about the same as in this video except mine was $17 bf (about $32 for that much walnut). I'm going to make this board (actually just very similar) for a Christmas present...hopefully turns out nice.
@Geeksmithing10 жыл бұрын
I quite enjoyed the Dirty Money style cost recap at the end! The tapered underside is very stylish!;)
@MakeSomething10 жыл бұрын
Geeksmithing Thanks!!
@nicholash45874 жыл бұрын
When he is squaring the sides of the board at just after 2:00 why does he use the sled for one cut but not the other?
@frank32839 жыл бұрын
I wish I could find wood at those prices!
@jasonpapesh406310 жыл бұрын
Hey David I'm in Cleveland. I make cutting boards, butcher block counter tops, rolling carts, Lazy Susans and wooden wall art. Need to chill sometime and make some sawdust!
@alt-w71309 жыл бұрын
Hello, great end product as always. The oil you use for the finishing what is the name of it and do it have FDA requirements for food contact surfaces?
@grantdavidson50695 жыл бұрын
Great Board and Video. But get a ripping blade and make it an 18 minute build.
@rosswells40904 жыл бұрын
Where can you get that much walnut for $20
@IamHueGraves8 жыл бұрын
did it actually sell for $70? ... I might get into woodworking more seriously then... :P
@Oscar4u694 жыл бұрын
@Pat Mahon It did
@stefanstefanescu57237 жыл бұрын
To the cost of materials you can also add: sand paper, mineral oil, electrical energy consumption etc. So the real profit isn't always so big! :)
@AdventuresInDIY10 жыл бұрын
Great quick build David. The large beveled edge makes it stand out and should still be stable for chopping on because of the thickness. Looks sweet!
@CameronsCandorOriginal9 жыл бұрын
Good video but I was expecting something a little more DIY... not everyone has those kind of awesome tools you got.
@KennethHayes08XX9 жыл бұрын
Fallen Rock Specifically the planer. You can kind of wing the other stuff with more common tools, but i'm no good with a hand planer.
@ikerclon8 жыл бұрын
+Fallen Rock You might want to look for community workshops in your area. Around Los Angeles there are some places where you can pay a monthly fee and use their machines to build your stuff.
@zososldier8 жыл бұрын
you can make this with simple hand tools/power hand tools. the most you would really need is a hand saw/circular saw to cut everything, hand planner/belt sander/card scraper to level it, and sand paper to round corners and smooth it out. Has been done sense the beginning of wood working history.
@BeaulieuTodd7 жыл бұрын
I doubt you'd watch a video on using a hand planer to flatten a board and go down that path.
@xxthegamecollectorxx46737 жыл бұрын
You can get a cheap 12 inch planer for about 250 dollars. Can't speak on quality though.
@Justicejamesb7 жыл бұрын
It's a shame, but many woodworkers worry about which finish to use on objects that will come into contact with food of children's mouths. The reason for the worry is that woodworkers have been conditioned y several decades of articles in woodworking magazines to believe that ordinary finishes like Boiled Linseed oil, Alkyd Varnish and / or Polyurethane may leach poisonous ingredients like metallic driers. And other finishes like lacquer, Two-Part finishes, Shellac and water-based finishes may leach poisonous solvent. The idea that some finishes are harmful is reinforced by a few manufacturers who label their finishes "Food Safe" or "Salad-Bowl-Safe", which implies that other finishes are not safe. IT'S A NONISSUE The shame for woodworkers is that a lot of energy is spent on the issue of food safeness when none is warranted. Food safeness is a nonissue because there's no scientific evidence of any problems. So far, as we know, all finishes are safe to eat off of, and safe for children to chew on, once the finish has fully cured (the rule of thumb being 30-days). Flexner, B. (2004) Popular Woodworking complete book of tips, tricks & techniques. "the folly of food-safe finishes." PG. 211. Cincinnati, OH: F&W Publications, Inc.
@briancnc10 жыл бұрын
Nice cutting board, black walnut and maple make a great contrast/combo. Try using a ripping blade in the future with around 24t count, you will cut thicker materials like butter with no struggle. It's amazing how a low tooth count sharp blade designed for ripping will get a higher output out of the same size table saw motor.
@bluemoosewoodworking7 жыл бұрын
Maybe I'm doing something wrong, but when I've made cutting boards I sand the snot out of it and wipe it with a wet cloth, only to have the grain raise up. I've used up steel wool, 600 grit, 2500 grit but still the grain raises. What the heck?
@CarlJacobson10 жыл бұрын
Very nice David, how did you like the finish?
@MakeSomething10 жыл бұрын
Carl Jacobson Super easy to apply and dries fast. I'm curious to see how it holds up after a few washes.
@JayReidy10 жыл бұрын
Once that stuff dries, add some wax and buff for a REALLY beautiful finish.
@darinlance15 жыл бұрын
20 minutes thanks to the magic of editing
@gordonchapman32538 жыл бұрын
I have a quick question too, how do you come to your pricing ? as I am a maker that's just starting out myself. I know my work may or may not be as good as others whom have been in the job for a while but I just don't really know how to go about pricing my work. Thanks for the inspiration man.
Haha! I'm a moron! Wrong link. kzbin.info/www/bejne/i6bConl6ltN6hrs
@spacecat868 жыл бұрын
+Make Something lawl
@marvinshelley35337 жыл бұрын
LET'S THINK JUST A MOMENT. Before we harnessed electricity all woodworking - including build homes and castles were done with hand tools. It's slower, but what's the rush? If one knows what they are doing, the quality will be superb, no matter if done with power tools or hand tools.BTW - Harbor Freight has some pretty good power tolls, and a reasonable price. I would think for a DIYer, HF power tools just might last for many years. I use their tools and make cutting boards, serving trays and handles, name plates, garden benches, coffee and end tables, hat and coat racks and candle holders and hinges all most exclusively with live edge lumber from the sawmills. Psst! Lowes and HD have a barrel at the back of the lumber section full of 36"x 2.5" x 2.5" pine for FREE. It is amazing all the things I do with that free stuff.Now, go make some sawdust!
@mikegreenebass9 жыл бұрын
i just noticed your "I like to make stuff" sticker on your bandsaw #ILTMS
@ChristopherDemetrick10 жыл бұрын
How funny, we both posted 20min projects this week ! kzbin.info/www/bejne/rKHJc2qCiqh6hpY
@MakeSomething10 жыл бұрын
Crazy! Great vid! I've never turned anything at 9:01am. Too early!
@danielulrich33144 жыл бұрын
I wish I could run pieces like that through my planer without having to worry about snipe
@brucewilson27636 жыл бұрын
20 minutes. Well, that’s assuming your wood is already planed and jointed. Add a few hours of glue-drying time. The time spent after in trimming, mitering, routing, sanding (including hand-sanding the edges) and oiling alone is probably more than 20 minutes. The cost of the tools and equipment is a few thousand dollars. Profit = $47.50. Yeah, sort of.
@aaron154010 жыл бұрын
Very interesting take on a cutting board. I like your style. Simple and clean. I have to say you are my favorite wood worker on KZbin. Made me cringe a little when I saw you cutting on the table saw just because whenever I hear my saw bearing down like that it makes me nervous. I also loved your last video you posted. I have never laughed so hard . No talking with this one I see, just the bongo music like your promised, haha way to go. Keep up the good work.
@MakeSomething10 жыл бұрын
Aaron Patchen Wow! Thanks Aaron!
@MichaelVivian7 жыл бұрын
Stupid question from the other side of the world... In that opening shot, was that whole board of soft maple really only 3 bucks? I don't think I've ever seen maple for sale here, but any local timber of similar quality would be 10x that cost
@codyschmidt81899 жыл бұрын
Only problem with this finish is its not recommended "for actively used butcher block counter tops that are used for chopping and cutting" That was right off of the description of amazon. But amazing work Sir!!
@jacobwilliams52712 жыл бұрын
In 20 minutes with a million dollars worth of equipment
@MakeSomething2 жыл бұрын
You also forgot about a having good attitude!
@AaronGeller Жыл бұрын
You could use under $1000 worth of equipment. Planer $300 , clamps $100, jigsaw $50, router and bit $100, compact table saw $300. So far $850.
@TedAlexander2410 жыл бұрын
$150 an hour. I am quitting my job. LOL. Hey David if you ever get tired of the walnut and maple, try bloodwood and maple.
@MarkChristopherpens10 жыл бұрын
very slick David :)
@BradPow9 жыл бұрын
70 bucks for a handmade cutting board? In my ignorance i have to ask if people actually pay that? And what demographic is paying that? That's incredible
@bigbillysbeard9 жыл бұрын
$70 are you kidding!! here in Northern Ireland that would sell for £90-£100 sterling!! yet again another top job!!
@CoastalUpcycling5 жыл бұрын
I know I'm late to this party but very cool video, I I enjoyed watching it!
@SunLightTheTaleTelle10 жыл бұрын
At first I thought that I'm looking the woodworking for meremortals =)
@MacalusoWoodworking4777Ай бұрын
Lol, learn to make a cutting board in 20min, by watchin this 6min video, lol
@makemoneywoodworking2 жыл бұрын
Great Video! What are the dimensions of the boards after you cut them in half?
@larrybaker53167 ай бұрын
$70, not in my neighborhood, if I could get that much I would be cranking them daily.
@frehleycomet8 жыл бұрын
Where in the world did you get a piece of walnut that thick and that long for $19.95 Please share since where I have been looking and the prices are ridiculously outrages. Thanks
@MakeSomething8 жыл бұрын
+frehleycomet Kencraft hardwoods in Toledo, Ohio
@Chriswoodworker8 жыл бұрын
20 minutes to make a lovely chopping board. You must have used so amazing glue??? What was it?
@McJaews8 жыл бұрын
+Chris Stevens 20 minutes work time. When you cook you also have different times for how long you spend actually doing stuff and how long it takes to be completed. The 20 minutes means that you can bang out 5 boards in one hour of work time, and letting them dry while doing other things. Think of it as 20 minutes of work instead of 20 minutes to completion.
@nattymatt10 жыл бұрын
No talking, just music the whole way through? I see what you did there.
@MakeSomething10 жыл бұрын
;)
@t_c52664 жыл бұрын
Add in the cost of the machines $1000 for the table saw $800 for the planer $200 worth of clamps $300 sander Me: a regular guy who doesn't want an entry price on a block of wood to be over 2 grand
@MakeSomething4 жыл бұрын
ok
@AaronGeller Жыл бұрын
You could use under $1000 worth of equipment. Planer $300 , clamps $100, jigsaw $50, router and bit $100, compact table saw $300. So far $850.
@t_c5266 Жыл бұрын
@@AaronGeller damn what a saving. $150 bucks down from $1000. Now I can afford to make my first cutting board
@AaronGeller Жыл бұрын
@@t_c5266 Let's be honest, you knew it wouldn't cost $2300 as your post originally claimed. I'm $1450 down from where you were at and things were cheaper 2 years ago. EVERYTHING you claimed to be a certain price could be had NEW for LESS and even cheaper if bought used. You could buy pre-dimensioned lumber, cut it with a hand saw, glued it together, and sanded the whole thing for very little money at all. At the end of the day, you've lodged just a complaint, not a real objection. You've glossed over the fact that you can make thousands of cutting boards from the same tools because they last a long time.
@t_c5266 Жыл бұрын
@@AaronGeller to do it as he did it, it absolutely would cost that much. That's why this is a horrible beginners tutorial. It should be shown with a hand saw, hand plane, handheld sandpaper, and glue. Not a full woodworking shop.
@kubectlgetpo8 жыл бұрын
Noob question: Why did you use a band saw for the first set of cuts and then a table saw for next?
@markssquared8 жыл бұрын
Maybe for less waste? I'm not sure though.
@brandonshaw77858 жыл бұрын
He used the band saw to speed up the process for a "rough cut". The cut didn't have to be perfect because he was going to make the final cut later on the table saw after the glue up and planing.
@ShopSDB6 жыл бұрын
Traveling at the speed of light, at 00:23 :-) Got distracted enough by the timer in the richt lower corner to make this comment, but will quickly return to the video to watch the rest!
@thewoodworkinghusky32844 жыл бұрын
For something that was so easy and fast to make, its such a beautiful end result. How much would you sell something like this at a craft fair for?
@MichaelMeis338 жыл бұрын
I was always told salad bowl finish was bad for cutting boards because it leaves a film which will then crack and such when it starts getting used... have you had this experience?
@TheFAAQUE8 жыл бұрын
+Michael Meis (tubbz23) Not to mention once it starts to chip, the material will end up in your food. Salad bowl finish can't be good internally. I've always just applied butcher block conditioner to mine.
@yony1207 жыл бұрын
Correct me if I'm wrong but it looks like the walnut is face grain and not end or edge grain?
@mcremona10 жыл бұрын
Very nice!
@MakeSomething10 жыл бұрын
Matthew Cremona Thanks!
@mcremona10 жыл бұрын
Jimbo L Now to find someone willing to pay that much... :)
@nickpelov9 жыл бұрын
that's not a real timer! Got you! How about the time for moving from one place to another (bench to bandsaw)?
@nickpelov9 жыл бұрын
Nickolay Pelov Also in the profit calculations you didn't include the time/efforts/cost to sell the board. It's often cheaper/easier/faster to make a $70 cutting board, than to sell it.
@johnnyking607111 ай бұрын
That’s not profit. You didn’t pay yourself power glue sandpaper etc. you loose money at $70 a board. People need to quit looking at how much just the wood costs and factor everything else into it in order to make any money and quit giving their talent away.
@MakeSomething11 ай бұрын
you commenting on a 20 year old video bro?
@gpfeif6 жыл бұрын
Making a cutting Board in 20 minutes... Using two tools that cost over $1k combined and about $200 worth of clamps. You too can make this cutting board in 20 minutes!!! (if you have $1,500)
@MakeSomething6 жыл бұрын
Not only do you need the tools but you also need a good attitude! Merry Christmas!
@Lilinye3 жыл бұрын
Is there an advantage to using that finish compared to food-grade mineral oil?
@JDHood10 жыл бұрын
What the... 20 mins from "raw material" to "finish applied"?!?! THAT IS AWESOME!! And mark me down as a supporter of that sweet, sweet conga groove! Don't listen to the naysayers!
@Woodlogger10 жыл бұрын
Very nice board. You've inspired me to make one.
@samsabastian1699 жыл бұрын
Couple of comments. Good idea but that board is not perfectly square. Note when cutting on the table saw the gap that appears against the fence. About 1mm each time. Also the cost is significantly more than quoted. Firstly glue is expensive and there is a fair bit of glue used in making the board, and secondly one has to take into account the capital expenditure of equipment used. But overall not a bad tutorial.
@liythalhamzah82895 жыл бұрын
You calculated the cost of materials, but did not calculate the cost of work hours.
@justinh160110 жыл бұрын
Any reason not to flip it and make it end-grain? More glue time, and finishing takes longer, but it would only add about 5 minutes to the assembly time and much better value for the customer. Just curious on your thoughts. I love the board btw, the beveled bottom is a nice touch!
@MakeSomething10 жыл бұрын
End grain cutting boards take a lot more time. I wanted to show off a quick 20 minute project. Thanks!
@alexwegner6599 жыл бұрын
Theres a guy called mtmwood or something like that and he makes really amazing cutting boards. One thing I've noticed in his builds is that he always adds grooves for your hands to pick it up. It would be a nice addition to add a dedo blade in there and cut a groove on two opposite sides for handles to pick it up easily. I think little details like that for the function of the actual build are really awesome.
@isaeproductions52176 жыл бұрын
Alex Wegner would use a dado for that, use a round over or cove bit
@Dan-tj6gu8 ай бұрын
The chamfer is acting as both a design feature and a grip.
@DustySplinters10 жыл бұрын
Dave, Great project! I am a bit concerned though that you might experience Kickback in the way you are using your rip fence on rectangular work cutting end grain. You can see the piece pulling away from the fence on the leading end. You do have a Sliding crosscut jig which would be much safer for trimming and even for the bevel cuts. The Bevel cuts could also be done safely on the bandsaw. Keep at it... Just want to see you stick around with us for a long time.
@MakeSomething10 жыл бұрын
Walter Ambrosch I think it appears as though it's pulling away because I keep my rip fence at a slight angle to reduce pinching and kickback. Also I have downward pressure on it the full time. Thanks!
@dpmakestuff10 жыл бұрын
I noticed the same thing but chalked it up to his fence not being square.
@DustySplinters10 жыл бұрын
Drunken Woodworker Dave, I will not debate, you do what is best for you, but ... you might want to consider those less knowledgeable than some. Use the crosscut sled. I've experienced enough kickback in 44 years... don't want anyone to experience that same feeling. Know what I mean?
@paulcaponetti83777 жыл бұрын
I am making an end grain cutting board for my brother for his wedding, and I am wondering how I can figure out if the wood I am using is food-safe. The woods I used are the woods that were available at my local lumber yard that looked good: maple and red balau ("mahogany" decking, similar to ipe, here: www.wood-database.com/balau/). Any thoughts on whether or not the resulting board will be able to be used? Or should I pick a different wood?
@lordsanityfree7 жыл бұрын
Was that a 4×8 3' walnut and two junk 1x4 1' minimum maple? Might take a crack at one of these as a learning project. Don't have any kind of planer but I got a table saw and a tape measure...
@seanmclarnon61346 жыл бұрын
I just don't understand how they expect to get $70 for a cutting board. Mark that as the price all you like but one trip to Amazon and I'll have that same board for under $20.
@MakeSomething6 жыл бұрын
For some people not everything is about finding the cheapest possible product.
@christophchris67757 жыл бұрын
lol Walnut 19.95 $ i dont find some in this side under 100 € :OO
@JeffBorger4 жыл бұрын
Having no woodworking experience, I came to this "Woodworking for Beginners" playlist to hopefully figure out where to start. I saw this first video and didn't realize all the saws, tools, and even a planer I would need to make something considered "beginner."
@Time2RockUrLive7 жыл бұрын
I like the product, but you had your calculation wrong. You would have to substract your (value of work per hour X time needed to complete the product) [Drying not included].
@karentaylor14855 жыл бұрын
More woodworking videos download app woodworking videos youtube install
@byronbosom72117 жыл бұрын
I never comment but that salad bowl finish you used says on the amazon discretion "Not for actively used butcher block counter tops that are used for chopping and cutting" it is on the bullet points next to the image of the product. Is it still safe to use?
@pnel77997 жыл бұрын
Great video and very insightful. However i agree with the trend amongst the other commenters that this doesn't really reflect a very DIY orientated method of getting to the same result. I have, in my own capacity, created a similar cutting board off of a tutorial i found on a site called woodwork junkie that didn't require high end equipment. Nonetheless, the video is very creative and i thoroughly enjoyed it. Cheers.
@lpeter57816 жыл бұрын
And the mark up is why people choose cheap store bought cutting boards not local hand made ones. Yes your time is worth something but $142.50 an hour?
@MakeSomething6 жыл бұрын
What you're not seeing in coming up with that number is the number of years of experience and the costs of running a wood shop. Also, I have no issues with selling my items. There are two kinds of people, those who want to buy handmade items and those who choose to buy cheaper manufactured items. Nothing wrong with either of those to camps.
@donovanladner52707 жыл бұрын
Great video, thanks. One quick question: So I clicked on the link for the Salad bowl finish and it's description specifies not to use on cutting and chopping surfaces. Does this mean your cutting board is a show piece and the buyer should not actually cut on it? Do you warn them about that detail during the sale?
@Allenrobinson99 жыл бұрын
I got the 1000's like! do i win a cutting board???
@loganhardee29098 жыл бұрын
Where did you find Walnut or Maple for that cheap? Its 12.50 per board foot for walnut and 9.50 per board foot for maple for me. :(
@MakeSomething8 жыл бұрын
+Logan Hardee Local place here in town called Kencraft.
@DerikGeddings8 жыл бұрын
I've always been told walnut is one of the worst woods in cutting boards since it "harbors bacteria" unsure if true or if just because its sealed that gets rid of that factor or not, other than that great video, you could even slice it more and flip it to an end grain board
@tianathesnail4397 жыл бұрын
I'm a beginner at woodworking and I was just wondering why at the beginning you used a bandsaw to cut the pieces. Was there a specific reason you chose that over a drop saw, circular saw, jigsaw etc. ? or does it not matter?
@reidsimonson5 жыл бұрын
Glue dries in 2 seconds?
@shroboy0710 жыл бұрын
You made a mistake on your math. Profit is $47.50 but that is before beer. Lucky for you I caught that.
@MakeSomething10 жыл бұрын
Haha!
@TheShavingWoodWorkshop10 жыл бұрын
Maple and Walnut is always an awesome combo, very cool build as always man !!
@MakeSomething10 жыл бұрын
ShavingWood Thanks!!
@StArFuRyZz7 жыл бұрын
This is a nice board...but where I live the walnut alone would cost $25...and need to be cleaned up on the saw before you could glue it.
@joeyfleming76266 жыл бұрын
very cool project. I don't know anyone that would pay 70.00 for a cutting board but i'm sure they're out there.
@hizo64HH8 жыл бұрын
I am glad you got that corner at the 5 minute mark. Nice cutting board!
@jimmyloudermilk84037 жыл бұрын
hizo64HH
@metz12harofreak10 жыл бұрын
So where do you sell the cutting board? online or what? also that was a cool design. i do alot with breadboard ends out or rock maple and also white oak with walnut or some other darker wood between the joints
@MakeSomething10 жыл бұрын
I've got 2 handmade shows coming up over the next month and that's where I'll sell them. I don't do much online sales anymore.
@nayaungwin81456 жыл бұрын
You're not counting your labour and experience, tools and machine, electric bill, wood glue and wood finishing.
@JayReidy10 жыл бұрын
Cut and rotate to get exposed end grain. Face grain cutting boards get really scratched and aren't as good for your knives. j
@Raadicals10 жыл бұрын
Wow, im making a guitar and i used the exact same wood and pattern on the body lol
@spenzo1445 жыл бұрын
im new to woodworking so just wondering - wouldnt it be safer to cut the thin strip b/w the fence and the blade? and you stand outside of the kickback zone b/w fence and blade?
@stuckinbabylon1869 жыл бұрын
It's worth whatever somebody will pay bottom line 70 or 700 dollars. Beautiful piece btw!! Keep it up!
@usernamemykel6 жыл бұрын
How would you make a "V block" for use with a band saw, when no table saw is available to cut the angles in the jig?
@WoodWorkTherapy5 жыл бұрын
I like the simple build concept you used with the thick walnut pieces. That does seem like a way simpler build than most cutting board videos I have seen. It makes it a real tradeshow type of build. Nice work! Thanks for the video. :)
@Handyandyworkshop10 жыл бұрын
Nice job. Do you get any snipe running such a short piece through your planer? I typically have to follow it through with a scrap piece to avoid it.
@MakeSomething10 жыл бұрын
Usually my planer will snipe the crap out of boards but this piece is so thick and heavy that I got no snipe.
@slotsize7 жыл бұрын
My face grain cutting board bowed after a few uses 😔