Making a DIY Small Sandblaster | Homemade Sandblaster

Hello Guys . After a long brake I m back to videos . I never stopped plan projects for my channel so I have a lot and interesting projects for the future.
I made a small video just for the start enjoye it .
New season start in October so see you soon !

[@MaverickProjectsOfficial]

Hi everyone ! After long brake Im back to my (new) workshop and here is a small project. New videos comming soon. Tell me your ideas what would you like to see on my channel ?

[@krazmokramer]

While this is an interesting concept and video, the results are far from ideal. A good pen style sand blaster isn't much more expensive than the parts required for this project. And the results are much more impressive. I have used the pen style for over 40 years, first as a dental lab technician and then as a dentist. Your project has the advantage of a larger hopper capacity. Thanks for the video.

[@kevino6670]

Hello, is there a place where anyone can get dental media & the pen style trigger?

[@MicBergsma]

Curious how much total cost for materials?

[@brianbeck4740]

Ok help me out here, I made one of these but the bottle exploded and media went everywhere. What did I do wrong? I used all same size fittings. 1/8-1/8

[@brianbeck4740]

There was a lot of air flowing up into the bottle. How do I prevent this.

[@Vladimirtub]

Very nice work! Small diameter of plastic bottle under pressure... Are you engineer?

[@shadowline1413]

Wich Spark Plug you used for that?

[@MaverickProjectsOfficial]

Hello I used a c7hsa sprak plug.

[@jdhappy7663]

I made one similar to this but it will not constantly spray sand. If I hold the trigger the sand stops and if I pulled sit it doesn't spray enough to clean anything. I appreciate any ideas or help

[@MaverickProjectsOfficial]

Did you used the same parts? What type of sandblasting material you used ? Also before sandblasting turn the upside down hold the trigger to spray clean air and then turn it again and start blasting.

[@jdhappy7663]

@@MaverickProjectsOfficial I did not use the same tip that you used. I made two different ones using different tee's and different guns and had the same results with both.

[@tomkeegan3782]

It doesn't work, the air blows the sand back into the bottle, the only way to get sand to come out is to stop the airflow briefly, so it's stop start, stop start, I can't spray continuously.

[@stirrlingsaunas]

got the same problem

[@vanDCreative]

You’re pulling a vacuum in the bottle, at some point you need to let some air back into the bottle, put a hole in the top of the bottle to allow for some air to get back in. That T junction always pulls a vacuum on the 90 degree line when air rushes through the straight line

[@3zooz697]

🐢🐢🐢🐢🐢

[@MsRae222]

EBay is an online service that

[@user-qg1yl8el2i]

Сделал воздух пошол в бутылку и она взорвалась🤔

[@robertsondereka]

For the love of God have someone that knows what they're doing edit this crap. Literally! Have! To! Painstakingly! watch! Every! Single! Goddamn! Twist! And! Turn this video could have been an hour shorter and still got the same point across