Making a Himalayan CROCODILE Leather Magsafe Wallet (Free PDF Pattern)

[@TeranAtelier]

Thank you Everyone for Watching! Make sure to check out my other leather build projects and pattern videos: kzbin.info/aero/PLcyBfQSJi8VdNu0zYVangNNTrM27tUOLo

[@Ovaloff]

thanks to you for free pattern!!

[@TeranAtelier]

You are most welcome!

[@jaroshd7456]

Thank you very much! Also for free pattern! Best regards

[@TeranAtelier]

You are welcome!

[@KAANASICI]

Where did you source the leather, it would be really helpful for me if you can share

[@GerardoEspinozaH]

This is awesome!! I'll be doing my own

[@TeranAtelier]

Thanks! Good luck with yours.

[@TheGopNik___]

Wow amazing work and also huuuuge thank you for free pdf pattern 👍👍👍

[@TeranAtelier]

Thanks and welcome 😀

[@realrango7930]

nice vid. i am about to do one as well but the pattern is too big for the 12 mini if soneone is about to use that one. you have to scale it down. gotta find out how much first

[@TeranAtelier]

Thanks, I will add a note that it is too big for the iPhone 12 mini. However, you should be able to use the stitching line as your final outline as it is only 63mm wide. You will then need to place your stitching line very close to the edge and mold/shape the front pocket so you can still fit enough cards. This is how the factory made Magsafe wallets manage to make them fit.

[@realrango7930]

@@TeranAtelier yes i saw that but then i have to make new stiching dots, so i will try to scale it down:)

[@istulover]

Beautiful work !

[@TeranAtelier]

Thank you so much 😀

[@arlove94]

Great work

[@TeranAtelier]

Thanks!

[@jaroshd7456]

Does it fit on every new iphones? I mean iphone 12 mini, pro, etc...

[@TeranAtelier]

The design was based on the existing Magsafe wallet and will fit iPhone 12 and iPhone 12 Pro Max. I have not tested it on the iPhone Mini. Best practice would be to do a small test before beginning crafting.

[@nanobyte588]

Very Nice, keep up the awesome work! Thank you for sharing 😃

[@TeranAtelier]

Thank you! Cheers! 😀

[@johnmcdowell1771]

Very Nice!!!

[@TeranAtelier]

Thank you! Cheers!

[@aledanniel]

What was the hardqare you used? The magnet ot whatever holds is attahed to the phone?awesome work.

[@TeranAtelier]

Thanks! They are a set of 3rd party Magsafe magnets I got on Aliexpress.

[@jamesaldana5096]

Nice video. How do you go about edge painting curved corners since there is no defined break? If you stop halfway to let it dry, won't it be difficult to continue where you left off?

[@TeranAtelier]

Thanks! The same steps work but you need to be more careful and apply thinner continuous layers. Depending on your paint you can dilute it with a bit of distilled water to help thin it out but you will require more layers.

[@osmankucukyavuz2221]

Greetings. I made the same product, but the magnet is very weak and does not stick. Can you give a link where you bought the magnet.

[@TeranAtelier]

Hi, I bought mine a few years ago so I am not sure that shop is still available however, most of the magnets will be the same generic product. I suggest checking which side of the magnets you are using because it is stronger on one side. Also the the leather thickness between the magnet and the iPhone should be as thin as possible, maybe 0.5-0.7mm, so the magnets will act stronger.

[@-Michal-Simcak-]

Nice work, I would like to ask about magnets. Does the wallet hold well on the mobile or are the magnets weak?

[@TeranAtelier]

Thanks! To use it properly you need to use it directly to the back of the phone or onto a phone case which also has magnets. The generic magnets are quite strong and hold well but I haven't compared it with an official product.

[@GiuseppeAlbanese1508]

Thank you❤

[@TeranAtelier]

You're welcome 😊

[@pkpopie1]

Love the work, do the magnets have to be orientated in a certain way? It looks like you placed them in with the blue sticker facing away from the phone, if that makes sense!

[@TeranAtelier]

Yes they only work in one direction. If you plan to try, make sure you test both orientations first

[@pkpopie1]

@@TeranAtelier thanks, I think I will give it a go!

[@martinlicea]

Nice wallet! Looks really cool with the red. Did you happen to have any issues with the cards getting their magnet strips scrambled with the magnets? I'm trying to make one as well, but trying to figure out if i should add a piece of steel in between the magnets and the card. Would love to hear your thoughts on this.

[@TeranAtelier]

Thanks! I have not found any issues personally. The way that Apple solves this is to add a layer of shielding in within the wallet. There are some card protection sleeves that you can buy online that say they can protect cards from demagnetizing. Getting hold of one of these and using it as a layer within the leather would be the best solution.

[@3arf214]

Do you have pattern for iPhone 13 Pro max

[@TeranAtelier]

This is a general Magsafe wallet pattern and should work from all iPhone models except for the Mini size.

[@tickerprint7589]

hello how big is original one ? i have your design and use it on iPhone 8 with magnetic case and idk if it fit

[@TeranAtelier]

Apple's is 64.2 x 94.9mm and my design is around 3mm wider and taller as pricking iron stitches need more space than a sewing machine. It should be ok for standard and Max size but I know it is not good for Mini.

[@tickerprint7589]

@@TeranAtelier thanks i resize your pattern to fit like original one and i want tr make one with alligator mississippian leather so thanks :)

[@TeranAtelier]

@@tickerprint7589 Sounds great! Good luck with your project 👍

[@ramsesm]

Really well done, love your work - a lot... where did you find the magnet pattern/kit from?

[@TeranAtelier]

Thanks. I got these magnet sets from Aliexpress, they are 3rd party products.

[@teddyal8770]

Please, can you tell me where did you buy a magnets?

[@TeranAtelier]

I got these magnet sets from Aliexpress, they are 3rd party products.

[@srv232]

www.kjmagnetics.com/categories.asp?msclkid=56fce2ddd3541d11c6f8bd27bc380e50

[@fariqueazwan]

Do u sell this product?

[@TeranAtelier]

No I do not sell any leather products. I am mostly about making videos and patterns.

[@journeywithin6274]

I wonder if you used 2 prong or 1 prong pricking iron to do the corner at kzbin.info/www/bejne/f6HGZZWmq7Gdr9k ? I wish you can show how to do the corner with 2 prong perfectly and securely without causing damage to the stitching line because of the turn and twist on the corner. I am still struggling with it. Thanks.

[@TeranAtelier]

For this pattern I used a two prong in the corner which is how I arranged the stitching holes in the pattern. A diamond awl or single prong would make the stitches slightly more uniform than using a two prong. For me most of the hard work is done in the design stage in CAD where I plan all my holes especially around curved corners, I will have a video on how I do this in future.

[@starboy020396]

Love the making process! I wanted to get into leather crafting and this seems like a pretty straight forward project for a beginner. Do you happen to have a list of tools needed to complete this project?

[@TeranAtelier]

Thanks! This project is a bit harder as it has so many layers that all need to be thin to work. I would recommend another simpler project kzbin.info/www/bejne/mKPMhYWGe7Fod5I where there is also a list of tools and materials in the video description.

[@lowspeak]

Very nice, I would buy the pattern if you're selling it.

[@TeranAtelier]

Thank you for your interest, I have just made the pattern available for free. See the link in the video description.