Making a Multifunctional Drill Press | Woodworking Ideas

Have you ever thought about it? If only I could hold the multitool accurately and vertically against the material...
I actually tried to make it.
I was worried about vibration before making it, but it seems to be OK if it is fixed firmly.
Multitool
Brand: BOSCH
Model Number: GMF50-36
Multitool blade 2
Brand: BOSCH
Model Number: AIZ10ABN
Electric Drill
Brand: Makita
Model Number: 6408
Trimmer
Brand: RYOBI(KYOCERA)
Model Number: MTR-42
T-Slot Track (9.5mm x 19mm)
Brand: CarAngels
Mold release agent (Silicone barrier)
Brand: GSI Creos
Model Number: VM008
Slide rail (300mm)
Brand: VADANIA
Model Number: VA1045
Binding band [non-stretch] 2.5cm width
Brand: Furupa
Model Number: HSSbelt80
Epoxy putty
Brand: Cemedine
Model Number: HC-115
Micro Compound Table
Brand: PROXON
Model Number: 27100
Contour Gauge (orange one)
Brand: GESPERT
Model Number: FANGXK-002

[@TheDublin47]

Absolutely fantastic work well done.good luck from Ireland ❤

[@GameRunner2024]

I have to Say Yasusiro, you sir are awesome not just on this video but all i have watched so far the craftmanship is awe inspiring and the tips as well. you have helped me get back into wood turning and crafting again cheers from Australia.

[@Madh2011]

私も似たようなドリルプレスを作りましたが、スライドレールの遊びによるブレが出てくるので、根本的に構造を変えて作り直そうかと考えていました。でも、このビデオを観てそういう解決方法があるのかと感心しました。素晴らしい。是非応用させていただきます。 他の作品例も含め、知恵と工夫で問題を解決するというのは貴方のような方の為にある言葉ですね。素晴らしいの一言に尽きます。 次のビデオも大いに期待しています。ありがとうございました。

[@YASUHIROTV]

そのように言っていただけると嬉しいです。 とても励みになります。 どんどんアップロードするのでまた見に来てください。 ありがとうございました。

[@Woodworking_Art.]

The way you do it is very good, very creative,

[@Ibrahim-wq3gs]

I am so happy I have found you! Thank you so much for the wonderful video and brilliant work!

[@girthbrooks39]

Although I've come to expect a certain level of ingenuity and ingenious design from Japanese craftsmanship, the creations born from your hand never ceases to amaze me. Greetings once again from Anchorage, Alaska!

[@juliocesarvelandia3386]

Que envidia. Un video muy elegante paso a paso. Queda uno enamorado de toda esa maquinaria. Un taller completo hecho con inteligencia. Saludos a todos desde Cali, Colombia.

[@Gregi.s]

Absolutely love what you are doing ❤️

[@jafarahmadi7369]

با سلام وعرض ادب احترام بسیار عالی وحرفه ای بدون نقص سپاسگزارم

[@robertkerby2581]

Amazing design, and build! Well done!

[@balloney2175]

Thank you, too, for your creativity!

[@2ndchance431]

Mesmerizing design and assembly!!!

[@user-gv7tv2yg5h]

また一つ最強アイテム増えましたね🎵 完成度抜群👍

[@YASUHIROTV]

まだあまり試してないですが、便利な最強アイテムかもしれません😁 コメントありがとうございます

[@3894747]

Love your work!!

[@kozue4507]

I don't know why, but it's amazing! We support you in the future! Yasuhiro TV!

[@YASUHIROTV]

I am grateful for your support!

[@lindonwatson5402]

I deeply respect and admire this project,

[@Zie_carpentry]

Hello

[@YASUHIROTV]

That encourages me a lot.

[@leandersmith6184]

Great project, I love it and I like the one setup for different machines. A quick release would help some time. Put on the bottom an aluminium u rail so all of the mounting plates will hook in. ( opening to the top) and one wooden knob with thread on the top to secure the plate to the base. This will skip (the where is my Allen key.) A little screw on the back could be your adjustment. But man what a clever idea. Thanks for sharing from Mexico.

[@givaldo2920]

Woooow amazing dude. Congratulations. God bless you always.

[@YASUHIROTV]

Thank you so much!

[@casche9368]

Excelente idea, tendremos q repetirla todos los interesados, muchas gracias.

[@user-lm8ii8pj3b]

Замечательная идея Универсальная подставка под любой ручной инструмент Таким макаром можно ешё болгарку установить и поставить на неё шлифовальный круг

[@asincich]

A very nice work. Thanks you. My case: I used those telescopic guides for a saw already... they move laterally so much, and they don't hold much force. I decided to change it for a linear bearing.

[@85hako49]

なんだ、ボール盤か。 そんな30分前の失礼な自分を張り倒してやりたい。 マルチツールやトリマーをボール盤になんて まったく考えたことがなかった！ しかも凄い精度！ハンドル製作時のホゾ穴の隔ての薄さにゾクゾクしました。ツールの刃って結構硬いとはいえ 全然逃げないのには感服です。 他にもボール盤に装着できる工具はないものかと フワフワと考えてみたのですが、何故かハツリ機が 頭に浮かんでしまった自分の阿呆さ加減が 今回の作品の素晴らしさをより痛感させてくれました。 あと、マルチツールの刃って動画だとあんな風な 蜃気楼みたいに映るんですねー。おもしろい。

[@YASUHIROTV]

動画を見ていただきありがとうございます。 精度が予想以上で私も驚きました。 振動でブレる可能性があると思いながら製作しました。もしブレた場合には緩衝材や伸縮性のバンドなども用意していましたがその必要がありませんでした。 くねくねしておもしろいと思いながら撮影しました。

[@jimmyjames5001]

I'm a new subscriber. Love your channel. Your commitment to great workmanship is truly inspiring. QUESTION... How many requests would it take for you to carve out time to draft blueprints for this one?

[@erdalgundogdu3833]

I congratulate your for this beautiful work.

[@davismize]

Outstanding!

[@michaelbaykara2322]

very carefully planned and executed, nice work

[@YASUHIROTV]

Thank you very much.

[@homemadetools]

Nice work yet again. We shared this video on our homemade tools forum this week 😎

[@falkon75]

Amazing work 🤩👍

[@johnreskusich2324]

Everything about this video is inspiring. Beautiful work. Beautiful ideas. Beautiful collection of fabrication techniques. Learning so much. Great video. Great production. Thank you for your generosity in sharing. Thank you for your hard work in doing so. Much respect.

[@bablutu]

Your channel is a work of art, it's a beauty to watch and inspire myself, thank you and God bless you.

[@imamudinimka5634]

Hhgh PP

[@alfredomarquez9777]

AS ALWAYS: Very useful ideas and excellent execution sir! Showing your need for adjustment (like the undesirable freeplay of the drawer slides, and how you had to correct it) really says very good things about you, being humble and honest. Keep up the good work and please continue to give us your great inspiration, good ideas and your excellent approach on how to make your own precise, less expensive and practical bench tools from common electric hand tools! A big reverence from Mexico!

[@YASUHIROTV]

I am glad you put it that way. I would like to produce more videos that are easier for viewers to understand. I will continue to do my best. Thank you from Japan!

[@pulpo439]

Muy Buen Video ------ *¡¡¡ BUEN TRABAJO !!!*

[@davethurston753]

This is the BEST. Thanks

[@billhawver1807]

Brilliant!!

[@chrnos15]

I'm a mechanical engineer from Spain, and I'm starting learning woodworking. I can see you acuracy, and as a profesional in the mechanical field, I really admire It. First of all, I want yo thank you for the very detailed videos. They are really good to learn diferents process with diferent tools, and always with an objetive! Where have you learnt this skills?? Greetings! Alejandro

[@YASUHIROTV]

I am glad to hear you say so. I was inspired by studying architecture in college and watching various videos on Facebook and KZbin to actually try it out myself.

[@alfredomarquez9777]

Hey Alejandro! Resulta que yo también soy un ingeniero, Ingeniero Químico para ser preciso, pero con gran inclinación hacia lo mecánico, y también admiro a este magnífico artesano Japonés y sigo sus videos, y coincido con vos en que su ingenio está muy presente. Te comento que ya quisiera yo tener personas tan ingeniosas entre mis compañeros! Saludos desde México!

[@Zie_carpentry]

Real project,, idea brilliant

[@YASUHIROTV]

Thank you!

[@shayanzarbati5216]

Excellent 👍👍👍👍👍👍

[@congopaintball]

very talented

[@junemecate2087]

A very nice idea i like

[@gc2512]

another amazing project, chances to have the plans published?

[@aguynamednak7150]

Brilliant use of oscillator

[@robertcraigh73]

Dude sweet! That's totally gonna be a thing now.

[@YASUHIROTV]

Thank you so much!

[@dannybaker2763]

Brilliant! I wish I had the necessary experience/nerve to try these, but I am not ready yet, not by a long shot. Great builds though.

[@Sportyg1960]

Please do you know what the tool is under the drill press

[@alexkochiev8572]

Perfect!

[@YASUHIROTV]

Thank you!

[@TTAJ]

좋은 하루되세요 또올께요~

[@user-pj5wh2ch4z]

Cool 👍

[@ismgns2911]

Yasuhiro büyük saygı duydum. Bana da ögret bu işi usta🙏.

[@oscardaza7559]

Gracias por compartir conocimiento, es bueno, no logré entender cómo lo ajustó para que diera escuadra el taladro.

[@karya_mandar99]

i like four videos you frend thanks tutorialnya kren salam satu hobi

[@rudiopa24]

Super Ideen!

[@keupondestroy911]

Merci beaucoup pour la vidéo

[@YASUHIROTV]

Merci pour votre commentaire.

[@chuchoorla4656]

Excelente trabajo, se puede ver los planos o medidas d los materiales? 👍👍

[@josephforsyth7874]

As always love your work. I'm still trying to get my head around the second adjustment with the angle bar, is there play in the connection between the board connecting the drill to the back plate?

[@YASUHIROTV]

Thank you!!! I don't know if I can answer your question well since I am still learning English, but I have a slightly larger screw hole in the board that connects to the drill. By fixing the edge closely to the angle bar adjusted to the correct angle, it is always installed at the correct angle.

[@josephforsyth7874]

@@YASUHIROTV that makes complete sense. I’m itching to try this build

[@ameenenterprise5869]

excellent dear❤

[@YASUHIROTV]

Thank you so much!

[@eugenkuptsov9290]

Забавная какая розетка с bluetooth.. Респект из России !

[@belarminoskills6007]

Great...

[@ManlyBurp]

What was the device used to move the work piece around under the router? Thank you for another excellent video!

[@derjanek]

Great Work! Is there any chance to get the plans?

[@ahmedmosata3844]

Hi there, you are using a very unique diy table saw. Would you share the way you built it?

[@YASUHIROTV]

Thanks for watching the video. My table saw is very simple, just a cheap circular saw plate with holes drilled and screwed in place. The fabrication process can be found in my previous videos on the 10-in-1 workbench or the 7 table saw guide.

[@bigrenegade7121]

Great Video! Would it be possible to make a holding bracket to use this with an angle grinder?

[@Sportyg1960]

What is the tool used under the drill press PLEASE ANYONE HELP

[@bigrenegade7121]

@@Sportyg1960 Not sure if this fully answers your question, but he has set it up to use 3 different tools here: 1) Drill (actual drill press); 2) Multi function Tool (a variety of blades for it); 3) An angle grinder (also with various blades that can be swapped out); 4) A router. When he is using the router he has a milling vise under it to allow for very specific tooling of a part. And what it is sitting on, I believe, is just his work bench.

[@user-oc9kr6fo7d]

you are an excellent woodworker ......can you help me to get an original of ryobi saws ?

[@alexpoloskoff133]

Hello! Interesting ideas and videos! Tell me what is model of your end saw please? (модель торцовочной пилы Макита)

[@YASUHIROTV]

Здравствуйте!　Большое спасибо. (Я немного не уверен в правильности своего ответа...) Митерсальная пила LS0612FL

[@alexpoloskoff133]

Hello! This is what I asked, thanks!

[@Woodworking_Art.]

xem cách bạn làm hay đó

[@mohamedchetti9014]

فديوهاتك روعة لكن بالرغم من أنني مبتدئ احتاج المقاييس بالسنتيم وتشكر

[@vakhtang86]

Hello. I really liked your video, please attach the file with the drawing blueprints

[@sergey66523]

Класс. У вас есть чертежи . Хочу сделать из дрели сверлильный станок.👍

[@tayyababbas3988]

bhai fbr tex kesy pay kren or kesy pta chly ga k hamra Kitna tex hai

[@MisioneroTv]

10/10

[@Mikado279]

Pourquoi pas de detail de mesure et autres?

[@josecenteno1454]

Hello sir. Ibwould like to know where I can buy a tool/guide like thebone you use at minute 23.50 Thank you and great job

[@alexkochiev8572]

It's a PROXXON precision machine vise I think

[@YASUHIROTV]

Hello! I bought it from Amazon.com in Japan. The details of the tools and other information are given in the subtitle or description. Micro Compound Table Brand: PROXON Model Number: 27100

[@erzincanli]

4:02 The rail was playing because 3-piece drawer slides have the leeway to pull the entire drawer box out. 4:38 And it's still playing.

[@omsingharjit]

I am wondering what is the use of Mobile phone on table ?

[@omsingharjit]

21:36 ooh , ok got that 😅

[@wessmith1218]

Big question is... can we get plans for this?

[@YASUHIROTV]

Sorry, I used to draw plans, but it is time consuming and I only draw rough plans for myself these days. I will only write plans for videos that have a lot of requests.

[@user-uw5kh8xe4x]

쓰바라시~!

[@carlossoares8079]

Como fazer um slide

[@Sportyg1960]

Please PLEASE TELL ME THE TOOL YOU’RE USING UNDER THE DRILL PRESS IT’S GOING BACK AND FORTH SIDE TO SIDE WITH THE HANDLE PLEASE ANYONE TELL ME

[@Rambotoyboy]

2 axis vice

[@michelerella3962]

Applausi!!!!

[@sergueiothonucci1638]

🙏🙏🙏

[@lilluminatoalternativo3926]

26:48 Another youtuber JSK Koubou had put on a bicycle handle and with the brake lever and wire operated the drill

[@user-sk2uw2zv4j]

👍👍👍💯💪🤝

[@giauhuynhvan2056]

Hi OK

[@henhensutendy7538]

I love every one of your videos, hope to make it, but no size shown. For other people, the video can provide detailed size information, I think you can do it, thank you

[@albertogalvis3463]

Muy interesante y bueno,pero el idioma no ayudó.

[@ilhanonan6991]

Söze gerek yok!

[@user-ek2rj7ff4e]

側をニスで塗らないのか

[@metagowilks3344]

👍🇵🇱

[@YASUHIROTV]

👍jp

[@pulpo439]

Minuto 14. la cinta velcro para sujeción, no me convence nada...

[@kolbakolba]

Look to Matias Wandel channel. Pantorouter

[@gardener38]

Включение конечно не очень надежно и безопасно

[@eugenkuptsov9290]

Розетка с bluetooth впечатлила

[@benviral9727]

👍Jos... ini gais ada video pemasangan tulang kapal kayu berat 👉kzbin.info/www/bejne/iKnYY6CmgJysnLM

[@AugustKling]

Why a mask?

[@flowerchildtokyo]

sawdust?

[@proofna]

looked a bit cheap.............🤨🤨

[@junemecate2087]

A very nice idea i like