I always wondered how they did that. The mig welder is a lot older than I thought.
@velazquezarmouries6 жыл бұрын
Landrew0 in the época they just used Thor's hammer it haves a similar effects
@koshi65055 жыл бұрын
Probably using rivets and/or brazing, which is kind of like welding anyways. Brazing has been around since 3000 BC.
@rumpelpumpel76874 жыл бұрын
@@koshi6505 riveting, forge welding and in later medieval times, they were able to forge a helmet (the spherical part) from a single sheet of metal. Brazing Not so much. The technique is around for a long time but brazed seams are not very shock resistant and would probably break after a few blows. Ever heard of the "golden hats"? Amazing craftsmanship from over 3000 years ago. Super-thin goldsheets in the form of a wizzards hat... (Gandalf is real😉) They're also made from a single piece of metal ... but it's gold, not steel and there are "magical engravings" on it. Really fascinating! Here's the Wiki Link en.m.wikipedia.org/wiki/Golden_Hat_of_Schifferstadt
@Uncle_Jacob4 жыл бұрын
Landrew0 yeah I wonder if that's an authentic reproduction of a mig welder tho
@Overworkedandunderpaid4 жыл бұрын
Rumpel Pumpel that’s fascinating indeed.
@TwentythreePER4 жыл бұрын
Your helmet look really good when it's done. I have a rudimentary coal forge in my barn that I've been trying to get to know how to use so I can one day make amazing things like this. Great work, I may have to try this if I get good enough and have the right equipment. Hopefully some day. This has been very inspiring to watch though.
@johngorman40523 жыл бұрын
Great work, on a tricky project too. Those curves in the helmet pieces would all have to be the same for the segments to fit together- a lot of forging and know-how involved right there. Excellent job by the Master Blacksmith, always a pleasure to see you at work, thanks.
@marcsenteney31607 жыл бұрын
Well done! Do you have plans to make more armor pieces? Would like to see more.
@LeatherSlim7 жыл бұрын
thank god you actually had a coif on underneath. most people don't even know they were used.
@therustedshank99955 жыл бұрын
Ikr
@TheStonehammerFiles7 жыл бұрын
After watching this and seeing the tools you used, I know I can make this. I may not have the oxy torch but I'm sure I can rig up something to work with my forge.
@michaelslack52695 жыл бұрын
That whole helm can be made cold no need for heat with these...
@DaneStolthed6 жыл бұрын
This is the best Spangenhelm build I've seen on KZbin, Big thumbs up!
@Chaos_Jorre4 жыл бұрын
I was hoping to see how they did it without welding. Do you have any idea and would you be able to do it? I'd be very interested in seeing a video showing how it was done like in the appropriate age :)
@keithhagler5024 жыл бұрын
Much the same way. The welding is just a good way to hold it together, but if the plates match good, then you can rivet the straps and plates together as you go. I use the welder on normal pieces that are not meant to be best quality, and there is nothing wrong with that from an aesthetic viewpoint as they are only visible from the inside. Also, the rivets do not have to be peened from the inside. You can use nails and peen from the outside, or, you will need a special hammer with longer neck to reach those on the crown from the inside. This was not shown or explained in the video. As to the historical approach, the pattern he is using is not the best to go about it. Study photos of originals and draw them and get a feel for how they are constructed. Normally using 4 straps instead of 2 and the straps have their own curvature. The only way I would make the helmet in this video is by using the welder, since it is not particularly historical, so I would be hard-pressed to build it historically in the first place.
@drason697 жыл бұрын
I was waiting for someone to come give you a landing strike from a weapon at the end, to test it out. Lol
@latelierdeledold47083 жыл бұрын
The helmet looks amazing !
@zellarcher7 жыл бұрын
Was this our Valentines gift? Because it was a good one.
@jonathanmartin-ives86654 жыл бұрын
What a beautiful piece!
@PunkBloke6662 ай бұрын
Hi! Job very well done! Is it possible to have the scaling of the hemet pieces? Or how did the scaling for the four main pieces? Thank you!
@jimbojet87287 жыл бұрын
Fascinating to watch that helmet being made. A great vid, thank you.
@fabrizio87694 жыл бұрын
Hai un attrezzatura fenomenale. Ottimo lavoro
@tango1zero226 жыл бұрын
Ive worked metal for 35 years. I always had an idea of doing one of these. I had the same idea. Mig weld 4 pieces together and cover it.
@paulus2810597 жыл бұрын
Really like this vid, a work of art mate, brilliant job. And you works so quick, amazing speed, lol.
@paradisefalls377 жыл бұрын
Great craftsmanship! Really cool design! Thanks for sharing!
@glennrussellapura64032 жыл бұрын
The Spangenhelm is actually a Roman design in origin. It was used and issued to auxillaries being cheap and essy to fabricate
@johnclarke76265 жыл бұрын
A very practical design for those who fight in groups. I have a barbute with no provision for hearing commands or enemy movement. Might as well be a bucket.
@dianarun997 жыл бұрын
Excellent craftsmanship! loved the video. Keep up the good work.
@tomasistudios26187 жыл бұрын
I really enjoyed your time laps vids. I make swords and other things, I also have some sword making time laps vids but I put things like actual speed on there
@michaelburiak43047 жыл бұрын
Very interesting) already watch all of your video works. Good luck!!! Everything you do in your videos - awesome
@daveadams77637 жыл бұрын
What a great project, very well executed
@rebelbiker99563 жыл бұрын
Fantastic build ! I would have pur a chin strap of some sort by the way
@SlySpe3 жыл бұрын
Salut ce qui me fascine au delà du travail de formage c'est que c'est toujours le bazar dans l'atelier.... je suis de formation aéronautique et je trouve ça hallucinant! Keep on mate
@محمدحسینعلینیا-ص1ق4 жыл бұрын
Verrrrrry good That's amazing ❤❤❤❤❤
@silentvisitor14206 жыл бұрын
Super Arbeit gemacht ,sehr gute Anleitung, Danke für das zeigen und hochladen .:)
@s.sradon97825 жыл бұрын
traditionally there would have been an overlap between the four quarters of the helmet which would have been punched and riveted
@maksmaso47417 жыл бұрын
Hello, first of all - Nice work :) just a little hint for you. look at the human head from the top, it is not a exact circle its a bit oval. when you are making those four parts dont make it exact equilaterals triangles, but move the point a littlebit to the side. longer side facing front and back and the shorter facing side of the head. final bottom shape of the helmet will be oval. it will be much more comfortable to wear and if it will come to that, it will absorb hits much more nicely because it wil fit the shape of the head better. hope it will help :) good luck with the next ones :)
@scotty78452 жыл бұрын
Hey Re-Enactor here. This! We aren't stick figures and helmets made like that are last to get picked up. Thank you
@homemademedieval39357 жыл бұрын
I love this channel! you make the coolest stuff
@Beowulf-sd5gh7 жыл бұрын
First of all well done! If you wanted to make it historically accurate you could have skipped the welding, but idon't know if you are interested in that.
@bill01275 жыл бұрын
Me before video: This looks easy enough to make! Me after video: Ehhh I might just buy one
@Scrimjer3 жыл бұрын
So is the music supposed to cover up the shop sounds?
@GypsyPaz6 жыл бұрын
Awesome! Althogh I cant help but be reminded of that scene from the Robin Hood movie where the Sherrif beats up the guard wearing that helmet. Lol
@raulantonioarayabugueno90476 жыл бұрын
Es usted un verdadero herrero vikingo Ahora me suscribo congratulaciones por subtalento
@ducomaritiem71607 жыл бұрын
Hi, just a question.... Why making 4 parts of a conical helmet and then welding them together.... ??? I don't get it. What can be simpler then First making the banding, Then shaping the plates , drilling holes and rivet them together... It's more historical, just as fast as what you do and more easy. Really, I've done lots of banded nasal helmets... I'm sure you can, I see a lot of talent in your toolhandeling. Or is there another reason for the 4 part welding procedure?
@phoenixforge59447 жыл бұрын
Duco Maritiem it was the first one i made, very much an experiment, making the banding first may be a faster option, il have to give it a go
@stairwayunicorn48613 жыл бұрын
not sure why you cut off the extra spangen from the front when it would have been perfect as reinforcement for the nasal
@jimmydunn87916 жыл бұрын
I think this channel is underrated. I put this next to DiResta and other great creators
@ChristianThePagan5 жыл бұрын
Nice helmet, but ... I have never seen a surviving helmet with those ‘V’ section spangen but I suppose there could have been helmets made like that. Much worse for the historicity are the round dome rivets, those are a re-enactorism. Medieval helmet rivets were usually flat or only very gently domed so as not to catch blades. You want blades to glance off, not catch on rivets so funnily enough you’d be better off for historical accuracy using carpenter’s nails than modern round topped rivets. I tend to file those things flat when I buy one of these re-enactor helmets and go over the files down river heads with a preening hammer to make them look hand made.
@jefftoler93026 жыл бұрын
hey man,screw that block of dam wood down! LOL i loved it!
@jacobdrescher17567 жыл бұрын
looks awesome!
@metaldetectingpa79505 жыл бұрын
I want to see this, made of copper, bronze, and brass!
@matnaylor89396 жыл бұрын
Not sure about the mig welding ?? But looks nice enough .
@paulorchard79603 жыл бұрын
Had an interest in medieval armor now for a year or so, no idea why, past life maybe!
@zarrus21725 жыл бұрын
Do you test fit it to make sure it fits you or do you already know?
@bonniemcdaniel82 жыл бұрын
I HAVE A HELMET THAT LOOKS EXACTLY LIKE THIS ONE. TO A TEA. IT WAS LINED IN VELVET AND COTTON WITH THE COTTON SEED STILL IN THE BATTING. NOT SURE WHAT THE ESTIMATED AGE WOULD BE.
@Tookrati4 жыл бұрын
Well done!
@boredtodeathify7 жыл бұрын
looks like it could use a chinstrap
@GEEK-fy1dz6 жыл бұрын
that mean. after all that, and realising the rivets are already in XD
@velazquezarmouries6 жыл бұрын
steampoweredman or some rivets too
@stevenwinnen91045 жыл бұрын
Beautiful job.
@ImaginationHobbies4 жыл бұрын
Awesome job!
@donvaldezmarco3 жыл бұрын
Where can I find one of this dudes in Minnesota?
@skeletortranham12397 жыл бұрын
If hes willing to make another, i would honestly buy one
@Nurbek-Ali4 жыл бұрын
Әдемі шыққан!!! Жарайсың!!!
@bradbarber7992 жыл бұрын
Ah yes, the ancient technique of welding with a propane torch. All jokes aside its a neat helm
@thegermaniccoenus25253 жыл бұрын
It does tell me you can make a Pilos or Konos helmet with that base steel cap.
@wooddecay5 жыл бұрын
AMAZING i need to try make one of these.
@TheArendt16 жыл бұрын
That fast hammering remembers me of Benny Hill, hitting the bald guy on is head :)
@Slysivermint Жыл бұрын
Wished you gave instructions to build this
@SquirrelsForAll6 жыл бұрын
Best 15 minutes ever!
@anthonyhargis68557 жыл бұрын
Very nice! Great work! A piece of chain hanging off the back to protect the neck would have been nice though. Perhaps next time?
@kukri88484 жыл бұрын
someone please help, i really would love to make a spangenhelm but i have no idea how to make the measurements and templates for everything. when j make the bands its either too small or not shaped quite right, is it just trial and error?
@mangiamohealthy31886 жыл бұрын
fantastic- how can i buy one?
@0kaplah05 жыл бұрын
Wow this guy works super fast
@sterlingknight59185 жыл бұрын
Nice bead!
@bryanthoblit22487 жыл бұрын
I see your channel is growing
@heathen-greaser6 жыл бұрын
Awesome video
@spongthe1st5 жыл бұрын
You're UK based? Can I ask where you source your rivets? I tried to get into armouring many years ago but couldn't find a rivet supplier
@michaelslack52695 жыл бұрын
R J Leahy Co. out of San Francisco (I believe they are a dot com) every rivet you can think of sold by the pound...your welcome (lol) happy shopping!
@phoenixforge59444 жыл бұрын
sapphire rivet company or make them if I need a special size
@stairwayunicorn48613 жыл бұрын
in the states you could try any Tractor Supply store, either (Herschel) R36-0462D or (CountyLine) 491-R10625
@bruceosborne18926 жыл бұрын
Nice works!
@toddmclain133 жыл бұрын
Any dimension on pannels? Looks like a cool project to try
@phoenixforge59443 жыл бұрын
Bit of trial and error, I used paper to make a template for it everyone's heads a different shape
@oscardacrus4 жыл бұрын
Excelente trabajo
@koningbolo47006 жыл бұрын
See you in Hastings... :-)
@rudbisanchezfernandez88264 жыл бұрын
FELICITACIONES MAESTRO-
@Moony16_6 жыл бұрын
I do not know anything about welding. What is the name of the technique you used?
@phoenixforge59446 жыл бұрын
Mig Welding
@attila-54914 жыл бұрын
Good job...and now you need a king
@hermitbamboo16064 жыл бұрын
this just makes me curious about how are these made in the medieval times? also it might be cool to use some medival style bgm.
@owenbagwell89974 жыл бұрын
hermit bamboo with rivets I think, the welding he used to strengthen it I think
@sirjosefofhessen45274 жыл бұрын
How can an sugar loaf helmet be rated when forged of high carbon steel 14 gauge
@zw.69014 жыл бұрын
Классный шлем брат!
@elchavintv22837 жыл бұрын
Excelente !!!, From Argentina !!!
@OutlawEdge7 жыл бұрын
SUBBED!!! Awesome stuff👍
@jimkaletaBuffalo7 жыл бұрын
Very cool project
@cernismirtkamennoeserdce92215 жыл бұрын
Can you make a Barbrute (Bobba Fett style) helmet?
@gabrielsanchez61604 жыл бұрын
Impresionante
@deutzd3017 жыл бұрын
sieht sehr gut aus.
@manuelkong10 Жыл бұрын
Well I love your helmet
@manuelkong10 Жыл бұрын
I'd love to buy that
@InsolentHalo7 жыл бұрын
How did you figure the pattern for the 4 pieces that make up the dome? Thats the part I am stuck on. Did you have a pattern?
@tonyberg68617 жыл бұрын
ChemicalLife I'm going to give it a try and was struggeling with this too, but if you make the a cardboard shape of the helmet and fit it to your head you can then draw out the patterns alot easier, I have yet to test if it actually work yet but I have a good feeling about it, just one strip around the head, one for height of your head and then the actual shape of the helmet on top of that. Hope it works and I hope it helps!
@phoenixforge59446 жыл бұрын
I borrowed one from a friend that was a good fit and made a paper template from that and added a little extra.
@Oldskoolbloke6 жыл бұрын
The pattern development for this type of shape is called "Triangulation" in particular you use a "Bull Nose" development (the same as is used for making a sink) it is tricky and unless you are making various sizes etc - it is easier to shape and then trim a template piece.
@TerravoreThrashBulgaria7 жыл бұрын
very good blast beats in the whole video ..
@bernardoxoke Жыл бұрын
Just great
@michael73247 жыл бұрын
Forging. The one skill I so with I had. Is this an expensive hobby?
@Robert-qm7yi7 жыл бұрын
depends on how much you want to spend, if you're clever you can forge with a hole in the ground, hair dryer and tools you have around the house; if you don't mind spending money you can sink thousands into it
@michaelslack52697 жыл бұрын
Not really...I mean any hobby involves some investment. Check out the SCA they have some really nice 'work arounds' that save $$$ and (with practice) you can get the same results shown here. For these style helms there really is no need to weld. To cut metal from sheet...find a beverly shear, Aka throatless shear Harbor freight has them (faster and silent...no noise) as opposed to a band or power saw. An angle grinder is a very handy and flexible tool! Of course a hand drill...then again if ya want to go faster and (again) silent find a whitney punch. Harbor freight has affordable anvils, or find a section of railroad track or both. If yer gonna do this hobby different types of hammers are needed as they are largely task specific, files are a huge help along with scrap iron for shaping yer own forming stakes. I could go on but I hope you get the idea. No need to break the bank bud! One last thing (or two) NOISE! This is a very noisy hobby so think about 1...yer ears and 2...yer neighbors. Hope all this helps. If ya got any questions hit me up...good luck!
@smytheindustries21927 жыл бұрын
Some people build a forge from an old brake drum, and steel plumbing pipe. They can burn charcoal and get air from a bellows. If you're not trying for period methods, you can swap the bellows for a $10 hair dryer. Some people love charcoal and various coals, and will use just that and air. You'd also need a hammer, and something resembling an anvil. You should be able to do it for under $50. Search Google for "simple forge". You'll see various ways to accomplish the same job. It's a hobby that you can keep adding to, and making bigger, better, setups. On my channel, there is a venturi burner, which lets you use propane and air, instead of charcoal. Mine was for a foundry, but they're the same burners. From there, you'll get into insulated forging space, like a very hot oven for heating metal. Making stuff is fun. Making cool stuff, that much better.
@bobhatesrainbows6 жыл бұрын
My first charcoal forge made with a brake drum, steel pipe and a hair dryer cost me around $50 CAD. My anvil was sitting around my friends mothers yard and was free. Any hammer around 3-5lbs will do to start (you'll end up with a lot of hammers). The first few projects you do will be making the rest of the tools you need such as hardy tools and tongs (these are great to learn on). It's a great hobby and well worth the time spent.
@afinoxi6 жыл бұрын
Just dig a hole in the ground , add a pipe to the hole , lead it away from the hole , add a hair dryer. After you started the fire , add a lot of charcoal (that's what gives the heat) , start the hair dryer and put your metal in the fire. After some time , take it and forge. It's easy , just needs a little skill. You don't even need to buy the metal. Go to a junkyard and pick up yourself some basic junk steel. Railroad spikes and old saws are very good choices for example.
@woodscrew56127 жыл бұрын
Need to protect the nose! Nice stuff
@paoloblasig456 жыл бұрын
fantastic
@vestcoasttrashgnome85657 жыл бұрын
Genius, Pure genius
@eduardocometta89025 жыл бұрын
Genio total!!!!
@margaritamalinina77345 жыл бұрын
What is the steel thickness?
@ionelolaru95822 жыл бұрын
Grosimea tablei ?
@KenManTheOneAndOnly5 жыл бұрын
Does anyone know how to make the "bowls" to make the bends?
@ugotit33x7 жыл бұрын
EXCELLENT
@mathisrogge87276 жыл бұрын
Nice vid
@The_Nailsmith4 жыл бұрын
Kinda wished there was a template
@kanalgeneral26097 жыл бұрын
can you make a templet for the four part that go around the head becuse i am thinking about making one but tese four parts are tricky.
@phoenixforge59447 жыл бұрын
kanalgeneral the 4 panels are the same size on this one. Give yourself plenty of excess and trim them down at the end. I think the pattern was roughly 2:1 hxw