Making a New Wooden Handle for TysyTube - Woodturning

[@mymechanicsinsights]

Here's an explaination video I made for my friend Tysy, showing him how to properly burn on a wooden handle onto a metal tang. kzbin.info/www/bejne/eniwXqB7aL5gpc0 Here's the link to Tysy's full video: kzbin.info/www/bejne/bGO6hoqXZ56ceqc

[@Karterlao]

Can you restore my chest? I can pay you. Can someone show this to my mechanics?? I really want him to restore my chest for me its been in my family for a long time since before I was born. Can someone show this to him or tag my mechanics?

[@qamarabbasofficialchannel1713]

You are new chanal

[@norm1124]

Value of the parcel ... just below VAT value 😂

[@Karterlao]

Can you fix my chest please??? My mechanics???

[@Justaperson354]

@@Karterlao go on his Facebook page or become a pattern and you might be able to send it to him if you ask on there

[@TysyTube]

Thank you for this perfect handle 😙and for your amazing talent 🤯🥰 You always blow my mind 🤤, i can’t wait to install it on my Bread 🍞 Slicer 🔪

[@mymechanics]

My pleasure, I hope it fits on your blade 😉👍

[@michaelw.881]

You guys are both awesome. Happy to see your cooperation. Keep it up!

[@PCFixer]

The doyen/master of lathing!

[@alantebiyev8401]

And what about the hole downside of handle? 🤔

[@miguelare3]

You guys are one of the best restoration channels!

[@irishwristwatch2487]

Actually gives me a little smile knowing 2 of my favourite channels are pals

[@mymechanicsinsights]

long time actually, we started collab when we had 15k subs, two years ago

[@horizonrock]

I thought the same. 😊

[@melkyfernandes4579]

3 because my mechanics has official and insights... :D

[@listodd1230]

For a long time I thought tysy and mechanics were one person... 😳☺️

[@samieemp6892]

Me to

[@GazEdwards8690]

The pop is so satisfying when he removes is from the lathe

[@mymechanicsinsights]

I like it too :-)

[@dermotmeaney]

Im not at the part yet ( :',

[@dalvid26]

I'm glad someone else likes that. I thought I was weird 😅

[@lobojoguinhos]

"Hello My Mechanics! My handle is broken, can you make me a new one?" Sounds like an RPG quest lol

[@lizardizzle]

This handle was used by my grandfather to make the Hero's Screwdriver! Legends tell of a screwdriver that could turn out any screw, no matter how rusted out tight. It never slipped or ruined the screw! I'm sure it was a thing of beauty. Restore this handle our make a new one, and I'll have my last step towards making the next Hero's Hand Tool.

[@1973Washu]

+150XP

[@davidbale8495]

It is dangerous to go alone. Here, take this...

[@dermotmeaney]

Looks like you need more (the good currency) go to the store to get more 1$ 50 10$ 500 100$ 500,000

[@giacox2701]

"Avengers is the best crossover ever" Mymechanics and Tysy : hold my handle....

[@mymechanicsinsights]

Thanks for watching, much appreciated

[@nickmack7282]

cracked me up, that was legit

[@DigistarDBZ]

Seeing a crossover between my two favorite restoration channels brings some well-needed light in this dark time.

[@mymechanicsinsights]

Thank you very much :-)

[@fredadd]

Great collaboration video. I cannot wait to see TySy video.

[@mymechanicsinsights]

Yes, me too. He already showed me some pics of the progress of his work...

[@snip3r416]

Now my mechanics 🧰 has to do something back ☺️ just watched Tubes video very nice 😋 now I’m watching your video 🪵

[@NotJanine777]

Nice work with TySy 👍

[@TysyTube]

thank you

[@ateuedai860]

Imagine if his answer was just "No!", and then the video ended...

[@TysyTube]

🤣👍

[@otneyat]

lol

[@samieemp6892]

😂😂😂😂😂😂😂

[@RogueJamesRJ]

I would be a little sad

[@marklewis2089]

LOL 😆🤦‍♂️🤣

[@isturbo1984]

I remember in one of your earlier videos when you said you've never worked with wood before. You were replacing a broken handle that couldn't be repaired. You've gotten quite good at woodwork since then!

[@mymechanicsinsights]

Thank you very much, I really do appreciate it :-)

[@hddc123]

He’s maxed out his tinkering stat

[@alexeyrekviem1896]

Много разных рестовраторов посмотрел, остановился именно на этом канале, мужик реально крут,токарь от бога..

[@tracybowling97]

I just love when you and Tysy work together! You two, in my opinion, are the best of the best!!

[@mymechanicsinsights]

Thank you very much

[@AnDIY_Handmade_Restoration]

A very good job has been done.

[@thomasthompson6799]

Great work on the handle and also great collaboration with TySy.

[@CSmith-gi3it]

Calling the metal man to help with wood turning is a bold move, and it has paid off. Great work as always!

[@mymechanicsinsights]

Thanks, I'm glad you like it :-)

[@finnyoak]

I love watching all the restoration channels collaborate and leave friendly comments on one another's videos. Absolutely wholesome.

[@kevinfoster926]

I think we can safely say that brass ring isn't going to fall off anytime soon, lovely job, I've also watched TySy doing the rest of the bread cutter.

[@ORTaeKwonDoChick]

I'm so happy you and Tysy worked together. I love both channels. I love watching your videos, I hope to be as proficient as you one day.

[@Alex_Erickson]

"My mechanics" is The Mechanic! Fantastic!

[@petevanderley4705]

6 minutes and 46 seconds of peace and tranquillity!! Finally

[@mymechanicsinsights]

Thank you so much :-)

[@chauntikleer]

Two of my favorite KZbinrs collaborating on a project. Here's to many more!

[@songohan4668]

It is so cool that two restoration YTers have such a great friendship. 👍👍👍

[@stevejohnson1685]

3:28 The Champagne corks are popping just like this! My Mechanics and Tysytube collaborating, AND both releasing related videos on the same day. Wonderful!

[@tonydelacruz2565]

You are a freakin genius my brother! I wish I had half your knowledge. You're way better than that random hands guy! You rock bro!

[@DotoRossi]

I love watching these videos! So perfect, so relaxing! Thank you bro!

[@mymechanicsinsights]

Glad you enjoy it!

[@macedindu829]

One of my favorite things on youtube is the Tysytube/My Mechanics bromance! XD

[@wolfeg1]

I'm curious if you recover or recycle the brass, steel, and other metal shavings; and if so, how? Along the same lines, I also wonder how you clean up all of the shavings and dust. Your shop is always remarkably clean. Do you use a collection system? I suspect that I'm not the only one who is interested in these topics. They'd make a great video. Thanks for your work. It's fun to watch, educational, and inspiring.

[@Stefan_Van_pellicom]

Separating and saving the swarf is not worth the effort. Not even professionals do it. Big companies gather it in 1 container and it is sold as mixed metal.

[@mymechanicsinsights]

I recycle it

[@mymechanicsinsights]

@@Stefan_Van_pellicom I can't confirm that at all. All companies in switzerland recycle their metal shavings and they separate them by material. If you made aluminium on a machine and you make brass next, then you're going to clean the whole machine that the chips don't mix.

[@cat3crazy]

I was wondering the same thing. I'm glad that you recycle.

[@DanSoldierGuy]

@@mymechanicsinsights I have a newfound respect for you, for what you do, and for your country! I've been wondering what you do with the swarf since I started watching your channel.

[@t0mn8r35]

I like to watch a lot of restoration channels but yours is still my favourite.

[@mymechanicsinsights]

Thank you very much, I really do appreciate it :-)

[@pqworks9019]

I just watched TysyTube’s video, then watched this! It’s cool to see that you guys collaborated on this project!

[@mymechanicsinsights]

Thanks for watching, much appreciated

[@chazhendrickson4755]

Nice work! Love seeing all of you guys supporting each other.

[@therealknapster]

Can't beat a bit of turning . Relaxing and satisfying

[@NikhilluminatiOfficial]

Am I the only one who feels that "My Mechanics" and "Tysytube" are WAY TOO SIMILAR 😂❤️❤️

[@joaco644]

I love to see how my two favorites restauration KZbin channels are working together!

[@mymechanicsinsights]

More to come!

[@Priyvaa]

Let me see: talented with complicated machines, a lot of tools, with metal and also wood! yeah my friend talent isn't a thing we can find anywhere. Cause turn a handle into a satisfying video is a thing that only a few can get... Thanks for the video and stay safe ✌🏽

[@mymechanicsinsights]

Thank you very much Priscila :-)

[@kyranindra]

My mechanics : upload 10 months ago This comment : 11 months ago WTH

[@leatonce]

Me encanta esta colaboración, ojalá más vídeos así, es muy relajante el contenido de ambos, se disfruta un montón.

[@nbrowser]

Just beautiful craftmanship between the both of you fine folks...keep u pthe good work on your channels and collabs like this...more would be nice!

[@cavemann_]

I love how the both of you uploaded at the same time

[@mymechanicsinsights]

Glad you like it :-)

[@itsjustdesti]

Ah! I watched his video for this and I was hoping you would make a video on your end! I was so excited that he sent a piece to you for help! You both are my favorites!

[@shadowscribe]

Awesome a colab between my favorite "like new" restorers.

[@mymechanicsinsights]

Glad you like it :-)

[@Benan78]

You ARE the best. PLEASE upload more of your restorations. Cant get enough ;-p

[@mymechanicsinsights]

working hard :-) thanks

[@rodrigomartiniriboldi2168]

you should've put a note inside "I MADE A NEW ONE"

[@mymechanicsinsights]

haha good one ;-)

[@HepauDK]

Like master and apprentice. Who is who should be quite self explainatory. ;) It has been quite fun watching Tysy evolve from not even doing surface prep before applying a single top coat with a rattle can to actually putting in some good effort. :)

[@mymechanicsinsights]

Glad you like it :-)

[@Bluesman57]

I always like your work, you're a true craftsman, and take pride in your work, and it shows!

[@mymechanicsinsights]

Thank you very much :-)

[@Bluesman57]

@@mymechanicsinsights Your very welcome!

[@AussyOutlaw]

So cool to see you two collaborate!

[@KevinJamesLaw]

Dude, your lathe work is really clean. And such precise measurements, compression fitting that brass...😱

[@mymechanicsinsights]

Thank you very much!

[@SuperZmeister]

I’ve been making replacement tool handles for a long time but never got the call to slot one, now I know how it’s done. Thanks!

[@mymechanicsinsights]

Glad I could help

[@vitasbutkoon]

Thank you for sharing Can't wait till the next project. Keep safe

[@lawrence.porter]

Great job, well done! The two that didn't like it thought you were making a Light Saber.

[@mymechanicsinsights]

Thank you:-)

[@wardausman2795]

Brilliant, as always. Just love watching your work. Best ever! Thanks for continuing to share.

[@mymechanicsinsights]

Glad you like it :-)

[@vinceianni4026]

Hello Mr.mechanics beautiful work well done I like it thank you Vince

[@Mongooseman19234]

Can "My Mechanics" make a new one is like asking if water is wet.

[@LeoTheMuppet]

It isnt according to Google and other sources for some goddamn reason

[@mymechanicsinsights]

haha :-)

[@DoubleDsDeliveries]

The "is water wet" idea is on a different channel.

[@MisterGames]

My two fav resto guys, nice!

[@GatoLand]

Really spectacular work, I saw the other video by Tysy and you achieved a result worthy of a museum. Watching your videos I feel like doing a lot of things, the problem is that I don't have those tools and what is more important, I don't have your talent, however I am very inspired to see how you restore those historical pieces. Thank you very much for the inspiration and receive a cordial greeting from Madrid.

[@kevincourville1164]

As always, an amazing rebuild. Honestly I find the videos to be therapeutic.

[@mymechanicsinsights]

Thanks for watching, much appreciated

[@DotoRossi]

Exactly what I feel!

[@joshschneider9766]

man I love seeing the various makers do cross over vids here on yt. Great lathe work as always

[@davidmcdonald654]

Good to see part 2 of this restoration.

[@fuelboyfilms]

Nice mixing a little wood work in with the metal work!

[@mymechanicsinsights]

Glad you like it :-)

[@trankful1769]

Это круто) легко, просто и без слов. Такие видео мне нравятся. Автор просто даёт расслабиться после трудового дня. Спасибо!!!

[@trankful1769]

Жаль что видео выходят редко((( Привет из России)))

[@michaelskinner896]

Simple, elegant, and beautifully done.

[@darci480]

You've actually started using wood turning tools! Means you enjoy it more then you thought!

[@ΑΘΑΝΑΣΙΟΣΘΑΓΓΟΠΟΥΛΟΣ]

Yes. Finally. Long waiting is over. The handle was awesome. No-one could have done better. Also when will you upload on the main chanel

[@mymechanicsinsights]

Thank you very much :-)

[@iongabrielzamfir8613]

ΑΘΑΝΑΣΙΟΣ ΘΑΓΓΟΠΟΥΛΟΣ '' No-one could have done better. '' Aλλ ά είσαι τρελός, φίλε μου ?....

[@ΑΘΑΝΑΣΙΟΣΘΑΓΓΟΠΟΥΛΟΣ]

@@iongabrielzamfir8613 ένας Έλληνας!

[@iongabrielzamfir8613]

@@ΑΘΑΝΑΣΙΟΣΘΑΓΓΟΠΟΥΛΟΣ Όχι, ίσως στην προηγούμενη ζωή μου, εάν μου αρέσει πολύ η ελληνική γλώσσα... (μισό google )

[@ΑΘΑΝΑΣΙΟΣΘΑΓΓΟΠΟΥΛΟΣ]

@@iongabrielzamfir8613 ok

[@ahujeffrey]

Such a kind deed for a fellow KZbinr!

[@mymechanicsinsights]

Glad you like it :-)

[@vegvisirnewera]

Thank you for your work. We will always appreciate your work.

[@mymechanicsinsights]

Glad you like it :-)

[@Mikey__Mike]

Love it. Can’t wait to see Tysy video now with an amazing collaboration video

[@mymechanicsinsights]

Thanks for your support :-)

[@SteveRogers461]

I love KZbin cross overs!!! 😃😃😃

[@mymechanicsinsights]

Glad you like it :-)

[@chandarussell]

I love watching you work.

[@rheffner3]

I saw his episode where he sent it off to you. Funny thing. But I guess you are the best at what was needed. Love your videos.

[@mymechanicsinsights]

Thank you very much :-)

[@NoflikOfficial]

Loving the colab between you two!

[@mymechanicsinsights]

Thank you:-)

[@josepcb2882]

Como todo lo que haces... GENIAL. Saludos desde Barcelona. Catalonia

[@sidereus7]

Your editing is so damn good. Your work is incredible and you can really show it off. So much skill on display!

[@mymechanicsinsights]

Thank you so much :-)

[@tallinstahle6932]

2:30 sounds like the best massage a cat ever got 💖

[@rosmundsen]

My Mechanics is the hero we need in 2020

[@amalmartinez7160]

H hold on ive been watching your video's for months almost a years and i just realised that 2 of my FAV channels are working together🥺🥺!! I love you guyss❤️❤️❤️❤️❤️❤️❤️ keep up the good work and the jokes🥰🥰🥰❤️❤️❤️❤️❤️❤️❤️❤️❤️

[@FireOfJagz]

YES! No epoxy crap to glue the ring in. Just a perfect friction fit

[@tyn999]

The new handle looks so smooth! Cool collaboration work!

[@mymechanicsinsights]

I'm glad you like it :-)

[@Tomshaaaa]

I like how he removes the sharp edges from everything :)

[@rekinek1111]

Wow, to ty mu zrobiłeś ten trzonek do krajalnicy do chleba! Super ci to wyszło.

[@howzatrestorations1538]

Top job MM, it's looks fantastic when put together on Tysy channel!

[@mymechanicsinsights]

Thank you

[@XaltLures]

Brilliant! Since the post of your video, I saw a lot of used woodworking lathes on ebay.. 🤭

[@timgrenville-cleave2848]

Okay, after seeing this my Hegner Lathe (for wood etc.) will be sold and I'll be in the market for a centre lathe!! Nice turning by the way :) You have another subscriber!

[@The93Momo93]

It was really nice you did a collab finally! Looking forward to the next one. The handle turned out very nice. :)

[@marciooliveira6208]

Meu amigo, você é o melhor de todos.. tysy tube é seu notável aprendiz.. seu grau de técnica nos trabalhos, é perfeito .. parabéns

[@shagarmohamed6149]

Well done jobs for your friend,GREAT

[@gienekk]

Have you found "Mon Chéri" chocolates in the box? ;)

[@mymechanicsinsights]

:-)

[@japan-e9j]

Magnificent work...king of Switzerland.

[@mymechanicsinsights]

Thank you:-)

[@TheSockMonkeyGuy]

Thanks for introducing me to TySyTube! I just subscribed to him too. 🙂

[@mymechanicsinsights]

Nice to hear that, thanks :-)

[@fabianoboaventura9632]

You are the most capricious in everything you post, a pity that you are a bit missing, but know that I enjoy your work a lot, I’ve watched all your restorations.

[@mymechanicsinsights]

Thank you very much, I really do appreciate it :-)

[@Mad9977]

great result as always ✌️😎👍

[@alfredfred4017]

wow! this channel is GOLD!

[@mymechanicsinsights]

Thank you:-)

[@jagjitkumar2446]

Very nice work 👌 pretty more than old 👍

[@braxtonnelson7422]

I do love it when two channels which I watch and enjoy cooperate with each other! Perhaps one day, there can be a meeting between the two with a shared project? I can only hope! Merry Christmas to both of you!

[@mams327]

La colaboración más esperada por toda Latinoamérica unida

[@mymechanicsinsights]

Thanks a lot

[@MM-qo5de]

you are the one , you are the first , you are the end , you are the empire of tools ...

[@TheDomander]

Wait - you mean Tysy is not an enemy, and i can watch his videos too? :D

[@Eshkinckot]

I think my mecanics videos are better and restorations are qualitative

[@ObsidianParis]

@@Eshkinckot Nobody can beat My Mechanics, but Tysytube material is still worth being watched !

[@ol_fortune9474]

Nobody should be enemy to each others even when they do the similar stuff

[@overloadtheorist8659]

Yea they also know ladb and help getting his channel back up and rescue restore

[@UltimatelyEverything]

The world is a better place when people love and respect each other's work

[@freirecristiane]

So beautiful! And that pop sound hehe

[@mymechanicsinsights]

Glad you like it :-)

[@freirecristiane]

@@mymechanicsinsights you made me discover the restoration love and inspires me to do some things at home. It's great to see you colab with TySy ❣️

[@jozsefizsak]

Always a pleasure!

[@michelemartin3360]

Ice been subscribed to your main channel for quite a while. I didn't know you had a second channel until I saw it on TySy's new video. Now I'm an old/new sub 😆

[@michelemartin3360]

I've*

[@Zoulouz]

Plus c'est simple et plus c'est beau !! Bravo !

[@mymechanicsinsights]

merci :-)

[@sleepytabby9113]

Everyone needs a friend like my mechanics.

[@mymechanicsinsights]

Glad you like it :-)