Making a Pan Tilt head DIY #2

[@jean-mamoutthelambertmarti3714]

hello Edu! I've jsust finish my moco on 3 axis very similar to yours. I never thought I would learn to work with metal that way, learn electronic and arduino. It all thanks to you and your contagious passion.

[@timbonnarens]

this is next level

[@reandogers]

Wow! One of my favourite channels. Awesome!

[@muhammadfatah2154]

I don't have hundred likes , so giving you one like . Awesome & hard work is appreciated.

[@ग्रेसनिर्मित]

खूप छान... मला हे प्रोजेक्ट बघून खूप छान वाटलं

[@septbruh9637]

Oh gosh this is so amazing You are so knowledgeable

[@kirillvoloshin2065]

wow. this is an amazing project. really cool that you also thought about transforming tilt to pan. thank you for the quality content!

[@edupuertasfruns]

+Kirll Voloshin thanks, when you don't have extra money, I think it is good to work a little more to give flexibility

[@GiacoWhatever]

Awesome job brother!

[@edupuertasfruns]

+Giaco Whatever thank you master

[@Topeich]

Hola Edu, els teus vídeos són OR PUR! Gràcies per prendre't el temps necessari per fer-los són súperinspiradors!!! Keep rocking man!

[@edupuertasfruns]

Moltes gràcies

[@jasonfry5846]

love your project ideas

[@sanjaylunar8340]

Very nice, i like it self creation.

[@diegoleoncadavidarango755]

Gracias, desde Medellín, Colombia (Control Digital Tecnico)

[@carbidecore]

Man i love your videos!

[@brandithorwarth7744]

omg i love your vids i love stop motion and puppets :)

[@RapidShots_Studio]

another great project Edu!

[@hugobracamontesbaltazar]

You are awesome!

[@JeffLafferty]

Thats pretty neat!

[@edupuertasfruns]

+Jeff Lafferty thanks jeff, good you are back with the stopmotion project

[@santiagocicero7157]

Hola Edu, que motor y drivers estas usando? No se llega a ver bien, gracias!

[@congtech]

Hi, is the bearing inside the plate on 1:17 necessary?

[@eyesonthetube]

very cool.

[@connecticutemporiumleanjou1472]

I need this exact pan/tilt/slider!!! Can you make us one? Also, the Legos at the end of the video look awesome!

[@edupuertasfruns]

I am going to partner with a company soon to sell something even better.

[@connecticutemporiumleanjou1472]

@@edupuertasfruns Cool, I am trying to learn how to build a Lego sorting robot as well, I saw some in the end of this video. Let me know when you start making one of those :)

[@edupuertasfruns]

follow the channel, I will post a video for sure

[@Lagilletetuc]

Amigo que motor servo se usa??

[@n___1502]

Como mola! Estaria chulo que le añadieses un motor para que pudiese rotar tambien sobre el eje Y.

[@RodrigoRojasEchaiz]

excelente!!!! muchas gracias por las ideas

[@DestraAmni]

Nice

[@tomdixonfilm]

How did you drill the counterbore for the bearing

[@chavadoorxd5368]

Tu trabajo es increíble me gusta y me sirve para aprender más sobre stop moution

[@edupuertasfruns]

genial entonces!!

[@chavadoorxd5368]

edu puertas disculpa tengo una duda, si quisiera dedicarme al stop moution si podría vivir de ello?

[@edupuertasfruns]

What do you think I should do next?

[@Francisco-pn8bd]

K2SO Puppet Please Edu

[@Tropictank]

Yes Please show us what is 2's and 3's and how to edit with dragon frame 2's or 3's

[@edupuertasfruns]

+Luke Foster Animations I thought about it, could be a good idea, I agree

[@nightmarecuiture]

Show us the process of interfacing the stepper motors with dragonframe.

[@tonpa8888]

You could make a video about: "How to film scenes, where something is flying"

[@mj12345671000]

Cool! Does camera hold position in case of loss of power?

[@edupuertasfruns]

No, on newer versions I use a battery to save the situation

[@hankanderson2189]

when will the rigs on your website be restocked?

[@edupuertasfruns]

+Henry Anderson in two months fully restored. If you need it before you can mail me and I build them on demand just because I don't have stock

[@chronosproduction]

Awesome work. I have a question; how do you get the dragon frame to do live motion?

[@edupuertasfruns]

Not possible without his hardware

[@chronosproduction]

@@edupuertasfruns thank you

[@tapasghosh1237]

Thanks for video

[@anuragchaudhary5648]

Wondering what was the purpose of belt in pan/tilt system? It was just to make it smooth??

[@edupuertasfruns]

First one I made I used a gearbox, I wasn't completely happy so I wanted to try

[@rohanchauhan3408]

I think you should do DIY of stop motion set props.

[@rohanchauhan3408]

and KZbin is your part time work.what is your full-time work??

[@edupuertasfruns]

+MOTION ALIVE I codirect a stop motion studio

[@sobenphon5858]

What kind of stepper motor do you use?

[@DanielDeArco]

Amazing bro!

[@tomdixonfilm]

What is the thickness of the aluminium used?

[@Gabgoody]

Hi there, was wondering when your K1 armatures will be back in stock..Thanks!

[@edupuertasfruns]

+Gabriella Goodyear mail me, I am taking preorders, I build under request around 2 weeks for building. Thanks!

[@Zetiarcade]

Eres un crack! genial!

[@sameerhejen]

Can we make without Arduino?

[@samuelphillipsjr]

How can I buy one

[@DiegoRivera-ft4oj]

Hola Edu, podrías poner la lista de elementos que usaste en este proyecto? Sobre todo los pulleys, y bearings. Tamaños.y cantidad. Seria muy apreciado! Gracias

[@edupuertasfruns]

Si consigo sacar tiempo para ello lo hago

[@diylife4840]

Hi, want to ask, what type of belt you use?

[@edupuertasfruns]

I think it was T5 or T2.5

[@rafasamurai]

Awesome! How do you make the arduino "talk" to Dragon ?

[@edupuertasfruns]

You must install a code into arduino so it knows each other. The code is in resources folder in Dragon

[@PhilipKlawitter]

yep, the code is called DFmoco, pretty standard, just load it into the arduino board and you are ready.

[@jszewczyk]

Hi How many teeth have gears?

[@bingoman4833]

Great video Please can you send me name of the parts that used to create this nice pan and tilt head diy and where you buy all parts of this project ? Thanks

[@josekhalil8348]

Can you insrt the project?

[@dojomats]

hi! just curious as to what driver you used to drive the motor?

[@erayzorlu3695]

Hey Bro. Please make cable camera slider system. For example "wiral lite"

[@sameerhejen]

Brother can we use Arduino Ethernet with joystick. It will help in tv control room

[@AnushkaLakmal]

do you know how to L and R to turn motor in 1 time line ?

[@edupuertasfruns]

In dragonframe you can program all the movements, it's easy

[@AnushkaLakmal]

edu puertas thank you for reply, i try to find but i can't can you make little video about time line and how to make directions and important tools in dragamframe.

[@jonypartos]

Hi Edu! Your projects are wonderful! I built a 3-axis slider based on your designs. My doubt is. Inside the Dragonframe can I make the movements in real time for video recording? I can only move the camera with all axes at the same time between 2 keyframes. I didn't find a button to perform the complete movement of all axes in all keyframes. I want to point out that I would like to shoot from the Dragonframe. At the moment I don't want to shoot stopmotion. I don't know if I was clear on my question? I read in the FAQ on the Dragonframe website that it is not possible to do REAL-TIME SHOOTING from arduino? Do you use REAL-TIME SHOOTING in your day to day? Thanks for your attention!

[@fenospeed]

ЭДО карасавчик! Продолжай!!!

[@NiherRD]

may you give me the arduino coding for step by step interval forward move?

[@sameerhejen]

Some time using cross that time need weight to balance how to do that

[@Sabinodireda]

Bravo....davvero.....ti seguo ;)

[@franknew9200]

HI Edu, l really like your videos.Thank you for the great work. I am inspired to take a big challenge to build a a pan tilt head for Canon XF305 Video camera (weight -about 3 kg) for our church due to live streaming and financial issues. Please, could you suggest the motors and Controller to buy? Any great suggestions welcome. Thank you. frank

[@edupuertasfruns]

+Frank New If you are making something for video I am not your man, all I have made and experimented has been always for stopmotion, so, slow for video. You have to make something like radiocontrol. Sorry

[@RascheTheRabbit]

Firstly, great video! I have a dumb question. I need to build something not too far from this; but I don't know what sort of reference media to find. Electronics? Mechatronics, mechanical engineering, etc. What media would help me most here? Any advice you can give would help a great deal. Sorry to bother either way!

[@edupuertasfruns]

You need both fields, mechanics and electronic to set the boards that runs the motors

[@williamhuang5329]

Hanzhen harmonic drive gear , strain wave reducer, robot joint, over 30 years experience

[@Nic-tg2ei]

This is excellent! in DragonFrame, can you play a timeline of keyframes in realtime with Arduino? Thanks!

[@edupuertasfruns]

Not real time. Just frame by frame

[@mikelo76]

Can you post the part list? thanks

[@edupuertasfruns]

+Michelangelo Fornaro most of them are custom but I will do what I can this night

[@mikelo76]

I would be very grateful if you can give a list of gear sizes the type of engine you used (the stepper motor) and the controllers for the engines connected to arduino. thanks :)

[@hugonascimento742]

Which model did you used as dent pulley? And which Mx screws? The aluminium is what kind and thickness? Thanks

[@edupuertasfruns]

+hugo nascimento lots of questions... I use T5 dent. Metric 4 and 5 screws and 10 mm thick aluminium. What do you think?

[@hugonascimento742]

edu puertas I'm a beginner at this DIY stuff but seemed strong enough. I think I'll try build one myself. The parts: The bigger one seems to be this m.ebay.co.uk/itm/1x-GT2-60-Tooth-60T-Gear-Bore-5mm-Timing-Belt-Pulley-for-6mm-Belt-3D-Printer-yfq/382171607498?hash=item58fb33f1ca:g:JaIAAOSwOyZZcWhA The smaller seems to be 20t 8mm bore m.ebay.co.uk/itm/GT2-Timing-Belt-Aluminum-Drive-Idler-Pulley-3D-Printer-20T-16T-60T-8mm-5mm-3mm/172788918383?hash=item283b05a86f:m:mFT7_fe_kostMxLoHu4zn9w And the nema which specs are they? Maybe you could do a parts list? :)

[@tellme238]

👌👍you are the best puedes hacer uno para mí por favor

[@loltroll2949]

hey i want to sell this dispositif from you; is it possible?

[@edupuertasfruns]

I just made it once

[@orhanyenici5691]

senin kafa çalışıyor bro

[@emmanuelsheshi1553]

crazy

[@RodrigoRojasEchaiz]

hola, me distes todas las ideas para hacer uno, lo hice pero al momento de conectar todo a Dragonframe el motor se mueve un poco y de desconecta, el Driver 4988 lo tengo conectado con Arduino uno y un cnc shield v3, HELPEEEEE!!!!!!!, muchas gracias

[@edupuertasfruns]

Buenas, tu código no estará bien, al usar una cnc shield los pins cambian, mírate la descripción de este video para modificarlo kzbin.info/www/bejne/qZ7Gq5iBpLmBpJY saludoooos

[@RodrigoRojasEchaiz]

funciono perfecto!!!!! demasiadas gracias lo unico que despues de un momento se desconecta el stepper, asumo que es por el calor que toma el Driver 4988 morado, sera por eso? pero muchas gracias

[@edupuertasfruns]

Puede ser, yo le pongo un ventilador encima cuando tengo más de 2 drivers a la vez, el DRV8825 no se me ha parado nunca de todos modos. Venga, a rodar pues.

[@RodrigoRojasEchaiz]

demasiadas gracias, te voy contando como me va, muchas gracias!!!!!

[@Electronieks]

where is part #1 ??

[@edupuertasfruns]

Part one is the previus video

[@Electronieks]

i gonna build it also! parts are ordered and scrap alu is arrived

[@Electronieks]

i.imgur.com/VpU1m4i.jpg

[@Electronieks]

Will nema 17 work also or do you 100% need the braking power of nema 23?

[@Electronieks]

www.tinkercad.com/things/5HfdbhIXJJA-pan-tilt-nema17-assy#/

[@Lucas__.]

Hola me podrías dar mas referencia del motor por favor.

[@eriktheoz]

Are you looking for an apprentice?

[@BenMateffy]

Where's the pan? There's no pan on this head or at least I cannot see

[@edupuertasfruns]

+Ben Mateffy if you watch the video you'll see it can be turned into one thing or another

[@pat.9502]

Excellent video but you just did one axis it's not a pan & tilt (2 axis). Could you please make a real 2 axis motorized. Thank you very much.

[@edupuertasfruns]

I made one in the past, check my videos and you will find it.

[@pat.9502]

ok i see it. Manifique. Merci

[@nocturno4191]

Hola Edu me puedes ayudar por favor, mira, tengo la posibilidad de participar en un proyecto de stop motion en mi país, nunca eh trabajado en esto, solo eh hecho un par de animaciónes como hobby (por que me gusta). Un tipo de una empresa vio mi trabajo, y me ofreció trabajo, como es un proyecto para harto tiempo, reuni un grupo de cuatro personas, y tenemos la posibilidad de hacer un corto animado de 10 minutos como mínimo y 12 minutos como máximo, nos comprarán el equipo, y obviamente nos pagarán, pero no tenemos la más mínima idea de cuánto cobrar, es una empresa bien grande, pero se nos avisó que aceptaran nuestro presupuesto, si es que está dentro de lo que se paga en el mercado, tenemos plazo de 15 meses, cuenta con 3 escenarios, y solo 3 personajes, la empresa además de comprarnos el equipo, también arrendaran el lugar en donde trabajaremos y todos los materiales que ocupemos, pero el problema es que no sabemos cuánto debemos cobrar por la mano de obra, te cuento que igual hay personas dentro de los que trabajaremos que son dibujantes, modeladores, editores, artesanos, en fin, la mayoría somos autodidactas multifuncionales igual algunos harán más de una labor (bueno en realidad todos), algunos más que otros, pero en fin, todos tendrán su labor específica. Crees que puedas ayudarme con algún consejo, tip o recomendación, para no regalar nuestro trabajo y para tampoco excedernos. Ya calculamos el costo de materiales, y todo lo que conlleva hacer la animación,. Solo falta saber si se paga más de acuerdo a cuántas labores haga alguien, o a su cargo, creeme que hemos investigado hace un par de semanas, y no encontramos información que nos ayude, y solo nos quedan un par de semanas para presentar el presupuesto, o perderemos la oportunidad de vivir de hacer lo que nos gusta. Por favor Edu ayúdanos, no sé a quién más recurrir. Gracias por leerlo, y disculpa que te moleste con mis problemas

[@edupuertasfruns]

+noc turno escribeme un mail y te doy cuatro numeros orientativos. Presupuestar es muy complejo y cada país mueve unas cifras distintas.

[@nocturno4191]

edu puertas vale Edu por responder, muchas gracias, oye ¿te escribo a aní[e-mail]? O tienes otro mail?

[@edupuertasfruns]

+noc turno [e-mail]

[@sotomonte_]

Woah!!! Vew 6.000

[@javiergonzalez4708]

K2S0 pupet pleeeeease

[@edupuertasfruns]

+japa I want to, provably on january I will have time again for my personal projects like it

[@pandacom7978]

Hi I'm from India...if you ready to sell...I want this..pls msge to me

[@edupuertasfruns]

I made this for a client as a custom order

[@NonnofYobiznes]

Dis is jao ji lern inglish, bai riding laik dis. It is priti cul.

[@DiscoverRajivVlogs]

Be an enginee not an animator 😄🤣🤣😂😍😍😍