You .left out the most interesting step! The casting.!
@TomsBackyardWorkshop7 ай бұрын
They probably had someone else do that part.
@classicmane37757 ай бұрын
Shouldn't that part still be added to the video.
@jorge7317Ай бұрын
For me is okey, every máster has his tricks, i mean, is not needed to reveal the whole process.
@mikesperanza6794Ай бұрын
My friend was a jeweler. I used to watch him carve and caste. To me, the most interesting part was making the “tree”! Then making the mold.
@_soulcraft_18 күн бұрын
Literally the only reason I watched this. 🙄
@eustacebagge60942 жыл бұрын
Yeees!!! Thank you for sharing the full process, i love the editing and naming every tool that you are using, that is something i haven't seen before. Awesome work!!!
@ape_object2 жыл бұрын
Thank you so much for watching my video! I'll make more useful videos and show you! Thank you :)
@QYXP7 ай бұрын
Absolutely gorgeous!
@sarahandthewolf5 ай бұрын
It’s a pleasure watching you work. Beautiful design ✨
@deathin11192 жыл бұрын
와 저렇게 반듯하게 각잡고 정확하게 줄질하기 엄청 어려운데... 개인적으로 복잡한 패턴이나 문양이나 형태 깎는 것보다 훨 어렵고 하면 할수록 어렵다고 생각되는 부분인데 진짜 미쳤네요,,,,.,, 너무 잘해요.......👍
@ape_object2 жыл бұрын
작업물을 좋게 봐주셔서 감사합니다 :) 앞으로 더 좋은 영상을 제작해서 보여드릴게요! 감사합니다!!
@LauraJanik-s5n9 ай бұрын
How do you set the stone with such a thick bezel? Very cool.
@02RIVER2 жыл бұрын
영상으로 보니까 만들어지는 과정에도 빠져들어요😳
@ape_object2 жыл бұрын
언제나 재밌게 시청해 주셔서 감사할 따름입니다 ;)
@홍반장-c4d Жыл бұрын
넘사벽 퀄리티네요 우어!! 혹시 블로그도 하시는지요. 보고 배우려구요 ㅜ
@ape_object Жыл бұрын
안녕하세요 영상 관심 있게 봐주셔서 감사합니다. 따로 블로그를 운행하지 않아 앞으로 유튜브에 도움 될 만한 영상을 업로드하겠습니다! 감사합니다
@hyunmdd2 жыл бұрын
보면서 많이 배웁니다..! 제 교과서 같은 존재십니다
@ape_object2 жыл бұрын
감사합니다ㅜㅜ!! 앞으로도 좋은 작업 보여드리도록 노력하겠습니다
@onechoi60203 ай бұрын
감사합니다^^
@Sugar3Glider7 ай бұрын
I'm curious about the casting process, this is some rather stiff wax too
@in2weeed6 ай бұрын
Ever hear of Nike ....just do it 😂😅😂 !! Think the brands of wax are from a company called Ferris range of soft medium and hard waxes for casting .
@shawnali5935 Жыл бұрын
Amazing work!! Can you provide a link to the exact wax carving tools you use?
@ape_object10 ай бұрын
The tools used by each country are slightly different. Most of my tools were purchased from local stores. I wrote down the names of the tools in the contents. They can be purchased on Amazon or AliExpress🙏🏼
@mopseul2 жыл бұрын
최고에요👍👍👍👍👍
@ape_object2 жыл бұрын
감사합니다!!🙏🏼✨
@M64sounds11 ай бұрын
이 간결한 튜토리얼에 감사드립니다. 당신은 단 한 번의 짧은 반복으로 내 질문 중 많은 부분에 답변했습니다. 나는 더 많은 것을 기대한다!
@ape_object10 ай бұрын
I will try to post more tutorials in the future. Thank you for making my work worthwhile🙏🏼
@sw83982 жыл бұрын
Hi, why do you liver of sulphur patina, before finishing??
@ape_object2 жыл бұрын
Hi,I oxidized it and blackened the inside of the ring's bezel.🙏🏼
@whochangedmyname66607 ай бұрын
ok so basically waxcarving is like make molds for the metal right?
@samydc3105 ай бұрын
The mold is the white investment outside the wax, but yes you have the idea
@Staroy4 ай бұрын
@@samydc310 Can you reuse the mold indefinitely?
@samydc3104 ай бұрын
@@Staroy I've only seen either dissolve it in investment or break it because they used normal cement You could make 2 halfs, sure but the liquid could seep through the half line and that would lead to silver or gold wasted
@Murdani_Silver2 жыл бұрын
Amazing work🔥🔥🔥
@ape_object2 жыл бұрын
Thank you so much💪🏼✨✨
@Shinji-82 ай бұрын
Is the wax ring used to make a mold for the silver ring ?
@ape_object12 күн бұрын
Yes, that's right. The wax is cast in silver through a lost wax casting technique
@Shinji-811 күн бұрын
@@ape_object What a pity this technique is lost.
@fighthub356611 ай бұрын
Hi, how would you know what size to make the ring and how would you measure it
@ape_object10 ай бұрын
A rod-shaped measuring tool is available. The desired number must be centered on the ring😁
@annalevinacom Жыл бұрын
Thank you!
@dariovelasco3407 Жыл бұрын
Q chulada¡¡¡
@rahulbranding7 ай бұрын
The RPM on the electronic tools looks very high, maybe you can have better control if you can reduce the RPM......
@Tsukikao10 ай бұрын
At 3:39, it says it's sandpaper but is it a specific tool ir just piece of sandpaper?
@Tsukikao10 ай бұрын
And nice video of course, sorry to be rude. Nice of you to show the process, I'll try it
@-NGC-6302-7 ай бұрын
looks like a regular strip of sandpaper with a piece of extra wax used as a sanding block. Sanding blocks are very common accompaniment to sandpaper in many applications and can be made from just about anything.