Thanks again for making these videos! It's so much more approachable when you can have an expert showing how it's done!! We should probably also mention that this fantastic model was created by user: @wile.e.coyote in the discord. His time and effort into this should be honored in some way as well. Keep it up! Love getting these!
@KruppArmor5 жыл бұрын
This needs a gif.
@Snow.Drifter4 жыл бұрын
Thanks for the tutorial! Though, the STL link seems to be broken
@chloemcholoe32805 жыл бұрын
the quality SOCKS compared to an injection molded sock! DADAM TSST! :d I can't even afford one why am I here. this is so cool tho :D
@RedBeard208424 жыл бұрын
The Chinese clone is actually really really good check it out! Its $50
@lolslim6906 ай бұрын
My gasket maker doesn't list the continuous temperature range, but luckily the technical datasheet lists it at 600F, 315C, continuous. The one I have is permatex 81160 for any future readers that happen to have the same one and are unsure.
@tapirath3 жыл бұрын
You can maybe use talc powder with the silicone to make a proto-putty. Since talc is inorganic it won't burn and it will be much easier to work with since it doesn't stick.
@DaRoach58822 жыл бұрын
Quick side note using stainless hardware is also a good idea if you use the soapy water to help decrease rust.
@davidamick2 жыл бұрын
Thanks for this!! I tried this using "Permatex 27036 Optimum Grey Gasket Maker" because it's for even hotter temperatures. The molding went well but despite waiting a full 24hrs the silicone was not solid when I opened it up, and still seems deform-able and weak days later. Not sure what I did wrong.
@davidamick2 жыл бұрын
After doing more research, I think I might have experienced 'silicone inhibition', most likely from the awful plastic food-prep gloves I tried using.
@WurstPeterl Жыл бұрын
@@davidamick thank you for the follow up!
@craiganater35 жыл бұрын
I'll probably never buy or use a mosquito hotend but this video was still great! awesome info on making other socks if i ever need it
@mistr_clean75573 жыл бұрын
sooooooo with the presence of vent holes why not use a syringe to inject the silicone? be a hell of a lot less mess and cleanup
@CanuckCreator3 жыл бұрын
would need a syring with a large enough needle for the silicon to flow There are designs that use that method ive seen, i simply didnt have the tools on hand
@user-lx9jm1wo3h5 ай бұрын
I tried doing this and the RTV never dried. I tried heat, I tried moisture, I even tried submerging it in water, but nothing worked.
@Ratkill3 жыл бұрын
4:48 Oh, see this is where I f*cked up. I made a box of smelly glue using RTV like a two part hi temp silicone. Thanks!
@tx313 жыл бұрын
Same thing happened on my end. Printed another Mold and went to town with the soapy water and it work wonders.
@MartinSchoenbacher3 жыл бұрын
Thank you for this awesome guide! This is working perfect! I didn't have high hopes for the first try. I never worked with silicone moldes before so zero experience. As in the readme of the STL Download suggested, I printed three moldes and made three socks (I did put them into the enclosure for the drying process for 3 days, basically forgot about them ...). So after opening all three and pulling them out gently. All three did look great! Again! Thx for the great tutorial!
@chloemcholoe32805 жыл бұрын
I tried it for my e3d v6 today and god the silicone is smelly and sticky and messy! maybe my choice of gloves made it worse (silicone gloves? or latex? no idea.) but they sticked so hard to everything :D lets hope it runs out okay!
@obogz3 жыл бұрын
nitril gloves usually are good
@obogz3 жыл бұрын
a cheap metoh is dunking the molds into baby oil and letting it set in for a couple of minutes or using vaseline combined with IPA best way is to use mold release
@MMGZZ4 жыл бұрын
404 on links, any update?
@Johan-ul9jb5 жыл бұрын
There are socks available on aliexpress by trianglelabs
@ColdFuse964 жыл бұрын
Yeah, but they take like 4 or 5 weeks to get here ಠ_ಠ
@rdh20593 жыл бұрын
It looks like the mold STLs are on thingiverse now... For those looking for them... www.thingiverse.com/thing:3017248
@sdasclk18616 ай бұрын
Lol
@floxflux5 жыл бұрын
very useful! thanks
@larkenj71933 жыл бұрын
I saw this a while back and was scared to try it but then I just went to hell with it and tried. Worked on the first try! Perfect video. Thanks a ton.
@8BitLife695 жыл бұрын
LOL you fucking guys. Fantastic work man. Love your videos.
@bitsurfer01014 жыл бұрын
Did you need to undersize the mold a little for it to fit the heater block properly? If so, by how much?
@holemajora5984 жыл бұрын
awesome!!! thank you!
@mwint19824 жыл бұрын
Pretty sure you could just smear some on the hotend and let it dry. Peel it off and cut a hole or two.
@gamerghost1233 жыл бұрын
Good man keep up the good work very useful and helpful video
@an_what4 жыл бұрын
Why in the hell do you not have a cordless drill?
@SinaShahsana3 жыл бұрын
I think mosquitoes get hot enough to burn the silicone sock that’s why they don’t offer sock for them .
@CanuckCreator3 жыл бұрын
This DIY sock has lasted a few thousand print hours already since I made it, zero issues
@SinaShahsana3 жыл бұрын
@@CanuckCreator oh yes , I agree. Just saying why I think they won’t offer it in the market. Thanks for the guide.
@joshua432143 жыл бұрын
@@SinaShahsana They now sell the sock. Probably the real reason they didn't offer a sock before is a simple case of "I never use a sock, and never had a problem with it" syndrome.
@EricMcCormick5 жыл бұрын
Your github link does not work. Did you happen to post this model anywhere else?