Making A Table Saw with Simple Tools - Part 2：Trunnions Angle Tilt Mechanism ➲

[@mr.v4702]

如果您對木作相關有任何問題或建議，歡迎底下留言討論！！ If you have any question or you would like to have a discussion about woodworking process, please leave a message below.🤓 Part 1：The Blade Lift Mechanism│鋸台升降結構 kzbin.info/www/bejne/jnbOlp2Dot2to80 Part 2：Trunnions Angle Tilt Mechanism│傾斜角度結構 kzbin.info/www/bejne/ipLceaCbg7SKj9U Part 3：The Cabinet And Tabletop│落地櫃體及桌面 kzbin.info/www/bejne/bnu6iYx-etaibLs Part 4：Wooden Table Saw Fence│桌鋸靠山 kzbin.info/www/bejne/Z6WUanelach6abs Part 5：Sliding Table Saw Fence│滑軌式推台 kzbin.info/www/bejne/rGrVoWaio5KaaLs

[@lualhomestudio]

Mr.V 被咖啡耽誤的木匠 3

[@srathalage2473]

Hi Thank you for another great video. Could you please let me know the names and size details about the steel parts that you used for this project. Thankyou

[@sosa5379]

Hjjnci

[@be-veo]

Hey mr.v i love your passionate of woodworking, well now i think this is my new hobby and my new passionate too, iam a newbie and i want to build this too, can i get the detailed (free plan pdf) from your table saw, 🙏🏻🙃, please send me on [e-mail] thanks 🙌🏻

[@g.sivanathan2309]

O.

[@francisco-kb7mv]

It’s great it

[@PapyAndre]

Bonsoir merci pour cette démonstration de savoir faire. Nous somme passé par un traducteur. Ici la Belgique Bonne continuation 晚上好，謝謝您對專有技術的示範。 我們經歷了翻譯。 比利時，祝你好運

[@mr.v4702]

Thanks very much. glad you're enjoying the videos！😃

[@andreaskiel4280]

Nice Video mr.v ...i love These perfekt angle Tilt mechanism

[@MrWojpen]

Thx. Mate for your job. Plans?👍👍👍😍

[@francisco-kb7mv]

Muito interessante!

[@jaimefloresr2994]

You have a plans? For the dimensions!! Please!!

[@RamonChiNangWong078]

as a beginner, I don't think I can ever archive these super precise cuts

[@mrmanusia]

its all right, he's build table saw with a table saw

[@muderabbas2517]

thanks for you

[@kevinfielding7029]

Lovely saw please tell me what material the top is made of thank you

[@osvaldoanibaljuanin7986]

Buenísimo!!! Muchísimas gracias!!! Desde Argentina!!! No puedo traducir, me encantaría para ver las medidas!!

[@陳假名]

請問這切割高度是多少？

[@kandarvy5776]

Good show Mr V. Tronion is a lot of work but can center the blade exactly. Thanks.

[@mr.v4702]

Thanks very much. glad you're enjoying the videos！😃

[@紳士西裝]

厲害~

[@RavsAjay]

That’s lots of stuff to make one saw, you achieved it, good.

[@mr.v4702]

Thanks very much. glad you're enjoying the videos！😃

[@draztiqmeshaz6226]

Exquisite!

[@DonDIYProject]

That's a lot of work! Good job my friend. I know you enjoy making it.

[@mr.v4702]

Thanks very much. glad you're enjoying the videos！😃

[@果菲]

粉絲越來越多，加油

[@mr.v4702]

謝謝你的支持！！~😃

[@carlosbaltagil1113]

Hi Mr. V, i lke coffee and woodwork like you, im glad with your videos, woud you please put intructions in english too? thank you

[@mr.v4702]

I’m so sorry about my poor English but I have Chinese instruction and there is auto translation in KZbin. Hope it can help you

[@carlosbaltagil1113]

Mr.V 被咖啡耽誤的木匠 thank you, i’ll do

[@紳士西裝]

有設計圖嗎?

[@amychao569]

你太棒了👍

[@mr.v4702]

謝謝，希望你會喜歡我的影片

[@minlalvaiphei]

Please see that it's about the mechanism not of the skills you have and whoever is watching keenly and more interested like me would appreciate it if you mentioned like, how the lifting part works and how and where to get those parts and how the tilted mechanic works can be understood in the last end second of the video alright 👍

[@franzotto448]

Sehr gut gelungene Lösung.

[@mr.v4702]

Thank very much. glad you're enjoying the videos！😃

[@diystarms6550]

Please, please make a miniature table saw, I need them ASAP. Great video.

[@zijaddajic6620]

こんにちは あなたは印刷のためのいくつかの青写真を提供することができれば、それはとても素晴らしい仕事をする

[@miguelticona7519]

Perú las medidas por favor gracias

[@Vitaly_Nezhinsky]

Such a machine will not fall apart? It seems to me weakly twisted. Dash the load and it will fall apart. Or not?

[@mr.v4702]

Sorry to confuse you, this Is just a thing I made to cover up the tilt part which is not completed yet, I will finish cabinet in my my next video! 😀

[@naimanahsap7689]

Mantap

[@koljafornia]

Please, forget about that black PH2 screws ! Great build!

[@mr.v4702]

Thank very much.

[@bilabyatarsibarani7514]

Please show me how it is working

[@bobsort]

Loved how your trunnion works. blade shouldn't move when moving to 45 degree position or your measuring your piece will nearly be impossible.

[@ИванИванов-э7м9е]

Молодец!

[@黄翰-q1w]

自制台剧，相当牛。

[@mr.v4702]

感謝！~😄

[@woodenren]

頭香！好功夫。你最近也衝太快，車尾燈都看不到了。

[@mr.v4702]

我也滿意外的，流量上沒有特別明顯的多😂

[@woodenren]

而且怎麼外國人這麼多

[@mr.v4702]

@@woodenren 嘿阿~~一堆外語我頭都痛了（半放棄狀態😱~）

[@amychao569]

你很特別、認真做時間到了流量就會出來的

[@mr.v4702]

@@amychao569 謝謝你，我會持續努力的😀

[@walterkoziej4173]

Hi, at 4:15, how do you align the position of the trunnion in relation to the saw blade in order for the blade to come out through the same zero-clearance opening in the table top regardless what angle the blade is at?

[@josvanhoof7616]

I think a zero clearance opening is only for one position of the blade. When you change the bevel of the blade you need another zero clearance plate.

[@walterkoziej4173]

@@josvanhoof7616 no, there is a way to do it so that you don't need a different insert for different angles of the blade. There are a few videos on KZbin showing the end result

[@josvanhoof7616]

@@walterkoziej4173 Ok. thanks. Do you think this method works also on a Dewalt DW745 table saw?

[@attilabori4734]

You got the answer from Cosmas Bauer's video (part 2)...

[@fabionunessoares2604]

show!

[@franciscoantoniomartinezsa3289]

Cómo consigo los planos

[@valerianochaves1635]

Show, show, show...

[@zijaddajic6620]

Please Plan

[@jesper1406]

Mathias Wandel will be proud of you. Every design detail, right down to the black PH2 screws, you are copying. And you watch John Heisz too obviously, as you have adopted his camera work, and a few of his wood working tips too. It's all fine, but why not just join the community around them, and be honest about it? No need to be ashamed of working from other people's plans - it's very much easier and cheaper than inventing the deep plate over and over... 😉

[@mr.v4702]

Hi there, For a young enthusiast of wood working like me, your advice and reminder is really helpful. Yeah, because of the reference of mechanism design from John Heisz, I have highlighted it as a reference in the appendix of this video. My vision of creating this channel is to encourage people (especially the Taiwanese people and the people surround me) to break barrier of DIY and start to love it. However, I will seriously take this reminder. thanks 謝謝

[@vladimirvladimirovich9225]

If you want to make a table saw with simple tools, you need to spend several thousand dollars to buy these simple tools.

[@변교선]

판매는 안하는지요

[@jocosn]

這種東西你少了一個購物清單。

[@mr.v4702]

購物清單？

[@jocosn]

用了哪些材料、木材材積大小，甚至可能的話包括哪裡買這類清單。因為如果有人要模仿照做，必須先買齊材料，不然做到一半卡工。這類DIY製作比較大型或精密器材的影片，通常會提供購物清單或影片中使用到的工具。

[@М.М-к6ж]

💣

[@coolevon]

你這個是拷貝別人的想法與方法。這樣不太好。起碼需告知參考來源！這是禮貌

[@mr.v4702]

謝謝你的建議！~ 因我從學習DIY以來觀看過無數的youtuber影片，要一一分享參考來源實在比較困難 但若有人提問想了解“參考”來源，我絕對會提供連結並推薦，如同我之前推薦John Heisz的影片。 我的影片只是單純分享我自學木工的樂趣，影片中我未購買過任何設計圖也不曾販賣過任何商品 要說我是"拷貝"....好像有些不太合理... 我透過其他木工達人的影片教學，再親自去做出自己的作品,而非去拷貝他人的影片或成品 但真的還是謝謝你的建議。

[@user-gq2xz7xu9s]

Super Mario

[@achmadfauzibaharsyah5586]

Hoax Title

[@М.М-к6ж]

💣