Making a tubular leather handle / leather craft tutorials

[@emeseb5449]

Hello! Could you help me please, what glue are you using for this technique? Thank you!

[@Theleathercraftacademy]

Hi there this is what I am using and I recommend it: amzn.to/2YxJIlx

[@wanpengsia857]

@@Theleathercraftacademy wht about the opening side after the stiching.. usually its glued together for a more tidy look.. r u gonna do tht to ur handle??

[@dluckygurl8]

@@wanpengsia857 Yes, I've seen leather craftsmen usually put leather edging glue after (and then some even add layers of dye as well after and then sandpaper it).

[@yubidubi]

You are an incredible teacher. Fantastic video. This is one of the best how to videos on KZbin.

[@nicoleorton5299]

It looks really nice. Great job, I think it looks beautiful and strong. Thank you!

[@wawudacarol993]

Thank you, you are a great teacher

[@WhiteLeaf-m9e]

Thanks teacher. Very useful to beginners

[@ketsi-shop]

Всегда приятно смотреть на работу мастера. Спасибо огромное.

[@PZ-hu8ox]

Концы шнура нужно расплетать и склеивать по плоскости с полосками кожи, тогда ручка будет действительно крепкой ! А по вашей технологии вся нагрузка будет на кожаные края.

[@TandyLeatherCo]

We love this video! Great instruction, very well done! Thanks for sharing!

[@Theleathercraftacademy]

I am honored, thank you sir.

[@aarthisuveka8827]

எனக்கு கற்று கொடுக்க முடியுமா

[@gilmarduarte4875]

Parabéns pelo video. Vc é.nota 1000! Deus abençoe.

[@4dette]

The Pink Panther of handle making!! Great tutorial!

[@gopalchauhan9649]

Clean and tidy worth watching thanks

[@margiemunoz2109]

I often wondered how the stitching on handle is performed. Nicely done. Nylon Rope instead of cotton upholstery piping rope. Great demo video.

[@sorayayousuf2949]

Thank you very much 👏👏👏👏👏👍👍👍👍👍

[@aifayashajaganshi]

I was really hoping to see you finish the edges

[@patriciaingraldi4719]

Great tutorial. Merci beaucoup

[@robertalexander3067]

Great stuff, glad I found you!!!

[@joeorton1218]

I made a pair in leather and a weekender bag in leather also from a recycled couch first time in my life doing that came out very pro

[@rahilhabib]

I'm curious to k ow why you didn't punch your stitch holes all the way through and instead decided to punch on both sides and then use an awl, too?

[@robertarmin1441]

Don't forget to edge-burnish the raw edges when finished. It does depend on the leather to some extent, however usually you're leaving the softer suede inner exposed, and that needs to be reinforced. Edge-burnishing uses heat to melt some form of shellac or similar gum/polish into that softer material, reinforcing it, sealing it and polishing it to a similar gloss as the surface of the leather. Be careful not to get it onto the surface itself.

[@petrasbodyworks2448]

Thanks. I intend to get into Leather, someday.

[@RonMack07]

Beautiful work

[@Essentialfaith1]

How can you stand inhaling that glue? I have used this glue before but it is very strong smelling. It’s very good glue though. It does the job. I usually wear a mask and have my window open. By the way, nice video instructions❤️

[@Theleathercraftacademy]

Thanks, I am using it for two decades. Sure it needs to be used in a well ventilated space. There are some water based glue out there but I still prefer solvent base and all pun aside I am sticking to it.

[@sheelapillay]

I really enjoyed watching your video. I was wondering why is it so important not to prick holes all the way through?

[@digsupplyco2261]

Unless you are using a reverse iron on the opposite side, you stitching holes will be the opposite angle from one side to the other. Thus creating an X for each hole.

[@Kamil__Cic]

Cant you flip the irons so they line up? I dont know just asking

[@anantharamba6832]

Great video.very useful idea, technic and tips for making a good strong jhandle with good finish. Thanks

[@warriorwithin9310]

Enjoyed watching your video.

[@Users_rx]

Terima Kasih! That's a thank you from Indonesiè

[@truthteller9522]

Wow, this video is so mesmerizing to me. Thank you, I LOVE it!

[@jorgevilloutavazquez4757]

Le agradesco, su video, muy biem explicado, y bien practico, y lo mejor es el patron, gracias por su tiempo, en enseñar.

[@phyllismiller8097]

Love this tutorial! Thabk you so much for sharing!!! I make purses and am having a hard time findind handle, but you make it looks so east, i will make all my own handles now!!

[@astridriedel2760]

Thank you for doing this demo

[@iyabodealliu1650]

Can you demonstrate how to apply edge coat?

[@MaryLou-jv2zp]

When you bent the handle I see some creases form on the inner side of the handle. Is this normal? But they don't always exist. I see some bags with creeses on inner side of the handles and some without. What it depends on leather or something else?

[@melisandeetienne7459]

Merci beaucoup pour cette vidéo !!j’adore

[@noseycomic499]

Awesome job

[@SuperPeppermint2]

you are very good at this!!!!

[@Theleathercraftacademy]

Thanks!

[@dandyd14441]

Thanks for your video it is so good.

[@craftinbyzeinab7566]

Thank you very much

[@meridith13]

What thickness of rope are you using, and also, what are the dimensions of the leather pattern?

[@outofthefactory]

Very helpful ! Thank you

[@voodoo0202ify]

Hey man, where can I get a skiving knife like yours?

[@mochenmat]

Where did you get that beautiful skiving knife?!?

[@김실비아-y4u]

Thank you~ You easy explanation was very helpful to me

[@trinidadvillegas1859]

Excelente gracias, tienes pacientes Para enseñar tu profesión té felicito

[@TheMarenohodro]

Very informative. Please tell me the length and width of the handles.

[@Theleathercraftacademy]

You can download and print the template there is a link in the video description. Print it at 100%

[@MrCunty79]

Votre video est Clair est facile a comprendre! Merci

[@BestestFriend49]

I don’t understand, Why do you punch holes in the two sides separately?

[@MichellesHandmadeCreations]

Beautifully done. I have everything I need except the pricking iron. Any idea where to purchase something similar but less costly?

[@truthteller9522]

Yang Yao 4 Pcs 3mm 1/2/4/6 Prong Leather Craft Tool Hole Punches Lacing Stitching Punch Tool www.amazon.com/dp/B07KVXRJR2/ref=cm_sw_r_cp_apa_i_bP1PDbJ6421YA

[@truthteller9522]

$13 bucks for a 3 mm

[@mercedeshurtado8604]

Perfecto .Gracias. bendiciones

[@luluconco9269]

Hi. Can you please give me the measurements of the handle pattern or upload the pattern.

[@ericaa.c.2999]

Hi! This video is really good! What's the distance among the tines of the fork, you are using to make the holes in the leather: 3mm, 4mm or 5mm?

[@Theleathercraftacademy]

about 3mm

[@Mocha519]

Please recommend where to purchase the tools you are using. Thanks 😊

[@Theleathercraftacademy]

You can check in the description of the video

[@ljbgbagsandshoehogarcia9264]

Great video thank you! Is this a specific rope for handbags?

[@smilingdog54]

How made you skiving knife?

[@Theleathercraftacademy]

I used an industrial steel saw

[@Kimdotcalm]

What knife are you using to skive?

[@eneidamoore9744]

I also would like to know what glue you are using please.

[@dalefdykstra5116]

It’s never to late to learn

[@teewdeelondon2671]

wonderful and just what I needed. very clear.

[@petrasbodyworks2448]

Thanks and God bless.

[@eyeonart6865]

How to add fabric to chain purse handle so it does not hurt shoulder?

[@marie-odilemartin876]

Svp quelle sont les dimensions de l’anse et de votre gabarit, merci

[@MrAndreSamuels]

Such a good video

[@Theleathercraftacademy]

Thanks

[@lisaalamin4373]

Wow! Thank you.

[@nkirukakaja95]

Very precise explanation! Thank you. Pls where can can I get the leather edge coating liquid?

[@Theleathercraftacademy]

fenice or giardini

[@staciedennison783]

Do you make them and sell them?

[@Theleathercraftacademy]

No I do not sell the handles

[@jingkylynmolina3414]

can you send me the exact measurement for the handle?

[@suzisaintjames]

If you refer to another video, like stitching leather, please add the link to the description box. ❤🌅🌵

[@Theleathercraftacademy]

Yes you are right: kzbin.info/www/bejne/e322c4yYerOtaLc also added the description box now.

[@alexdorand]

You should cut the robe at angle and seal it so you don't have a bulky heat at the end

[@MrCunty79]

Ty!!! That was very specific and to the point.

[@griceldarobledo1938]

Excellent.

[@cecileeannelockhart8158]

What is the width of the rope you are using please?

[@Theleathercraftacademy]

I think the diameter was 10mm

[@naveeshnarayanan3257]

Thank you

[@ObmanutayaRocciyanka]

Very nice music! ))

[@zofialaurent2016]

thank you verry muchh❤

[@kwanusoro9761]

Please what's the name of the fork-like tool

[@Theleathercraftacademy]

it's called a pricking iron

[@elainesilva1966]

GOOD job! I wonder where can I find those tools.

[@Theleathercraftacademy]

Elaine Silva thank you you can check in the description of my videos, I have also made a video about tools

[@YudiMuchanis]

Why you don't want the hole completely through?

[@123456789smilez]

What r the measurements for the handle? I am going to create the pattern piece myself and I'd like to know your measurements for reference

[@Theleathercraftacademy]

Please check the link in the description you can download the pattern

[@TexHoss1]

Greta informative job & Thank You Sir.

[@MistyQuilts27]

very informative. excelent video.

[@cecileeannelockhart8158]

Does it matter what type of glue you use?

[@Theleathercraftacademy]

I recommend using contact adhesive

[@alphanumeric1529]

What Lakoza stitching iron is that?

[@Theleathercraftacademy]

Hi, I made a video about this kzbin.info/www/bejne/h4apgpmlq7BmiLc

[@duliriel]

How do you smooth the edges to make it soft and shine?

[@naremanali8977]

Good information

[@celestteazulse4944]

That is a great tutorial..thank you so much👏👏👏👍👍👍👍👍👍🤗😍❤🤝🙌

[@tonydibraccio4771]

Si possono avere le misure precise ho stampato il pdf ma non corrispondono le misure grazie

[@youssefmilkyway3155]

the glue brand or type you r using please ?

[@gusalvarez3756]

Superb

[@MdRizwan-hg3wl]

good job pleas name of edg rounded cuter blade

[@نجويالكفراوي-ز4ض]

Thank you for your help

[@blancaestelacifuentesflore8229]

Gracias maestro 👏

[@Theleathercraftacademy]

You are welcome

[@kpoornima2131]

Where do we get leather but?

[@suzesiviter6083]

Any tips on what leather and where to buy it?, thx great video!.

[@IgorBerezhnyi]

What glue do you use in your work?

[@armyof12monkeyss]

Are you left handed? If so where can I find that exact tool you use to skive the leather? I think that would solve some of my problems. Great video, thanks for the upload.

[@Theleathercraftacademy]

Yes sure, the blade angle needs to be reversed if you are left handed. Look for left handed skiving knives on Google, Blanchard is doing this. Or use a straight blade.

[@armyof12monkeyss]

Between playing instruments and tools being left handed has been a pain. Thanks for the quick reply.

[@Theleathercraftacademy]

I confirm, maybe a bit easier for me because I do a lot of things with the right hand but can only use my left hand for writing, skiving and cutting. Weird.

[@piagomez9206]

Muy bien como explicas el proceso de las asas, es bastante hermoso el trabajo que haces.

[@JudyBarajas]

What type of glue do you use?

[@Theleathercraftacademy]

Contact cement or contact adhesive, look at brands like Barge or 3M

[@aliciaaguilar3139]

Hola buen día Mis preguntas Cómo se llama el pegamento que se usa??? Y dónde puedo comprar esos instrumentos??? Gracias saludos desde Pesquería Nuevo León, México.

[@bcsxyz]

thanks for sharing. I really loved this and needed it to finish my first bag handles! thank you very much!

[@Theleathercraftacademy]

Glad this helped! Good luck with finishing your bag!

[@FashionSense518]

I'm very impressed! Thank you for making this video 🙂

[@Theleathercraftacademy]

Thank you!

[@paulodefranca8982]

Obrigado virei artesão vendo os vídeos de vocês.

[@gloriabrothers5508]

What kind of glue are using? Thank-you.

[@Theleathercraftacademy]

Contact adhesive