Making a Walnut Charcuterie Board | Woodworking // HowTo

[@davecantleberry4965]

Thanks for the mix of humor and expertise, kept me watching til the end

[@ElCidPhysics90]

Funniest video I’ve seen in a while. Oh and instructive at times

[@tommyweeks8289]

Just found your videos and I'm now a big Fan! Like how you keep it simple and love your sense of humor. I'm always talking to myself and making jokes of the silly things I end up doing while working on projects. I'm a newbie wood worker and have only made a few pieces and wanting to do more small projects and I like some furniture. Keep the videos coming, I will be watching!

[@MR-si1eq]

Ditto. I just found this. Its 11 months old. Loved it. I think if all 3 of us got together we might get arrested 😂😅😂😅. I hit your subscriber button. Gonna look at more.

[@ronniekotler9265]

I have to give you a 10 for your sense of humor 😀

[@doingitoutdoors7083]

I just started watching charcuterie board videos. Who knows I might try making one one day. Just wanted to say, I loved the juvenile handle size comments. Great video!

[@melodywilson5255]

Michael Scott would have had a field day! Great video and nice boards!

[@danlynch1154]

The handle, I'm still laughing. Thanks this was great. Nebraska says Hi!

[@mstev5956]

I normally don’t like the Cnc work ….because ….but you’ve got skills that I haven’t , so appreciate it. Keep up the good work

[@donalddparker]

You're real. Appreciate that. Keep cutting!

[@williamsfamilycrafts5227]

Thanks for the lesson and the laughs. Thought I saw you throw your remote somewhere. Too funny.

[@DanielDunlap]

😁

[@herlinghandcraftedhardwood]

Great video Dan. Natural self made the video. No faking it.

[@DanielDunlap]

Thank you!

[@gottabighit1]

Absolutely killin me at the 11:00 mark. I have tears … I’m right at 12 & 1/2 mentally, myself …

[@jordanchapman2978]

Stellar video! The editing and transitions are super clean, love it. And Dan, you're the real deal man, keep killing it🤘

[@DanielDunlap]

Thanks bud! 👊

[@nicklagios5094]

Nice work! I,m just getting into making edge grain cutting boards and charcuterie boards. Thanks for the inspiration. I enjoyed your humor too!

[@ChapmanWW]

Sick spinning edit 👍

[@DanielDunlap]

Thanks!

[@cuwest1]

Great video. Excellent board!

[@LAtelierAboie]

Really nice video, a lot of nice improvement since the last one ! I can't wait to see a much bigger project :)

[@DanielDunlap]

Thanks buddy! I really appreciate it.

[@normhewitt4332]

Great sense of humor. I taught woodshop for 30 years and was familiar with all of your jargon. I mill my own lumber, but am envious of your equipment. I have made many boards, and am partial to chevron boards. really enjoyed your presentation. Our passion for wood should be emphasized to more of our youth. It's the satisfaction of our creativity that stimulates others. BTW, what do you charge for your boards? Woodman46

[@andrewmortimer3317]

This was an enjoyable video. I thought you should know- Per my 6yo somebody should tell you not to eat glue😂

[@DanielDunlap]

Thanks! And noted 🤣🤣

[@johnbies7041]

I run both boards through the jointer at the same time. Then it doesn’t matter if the jointer fence is true 90 degrees or not.

[@larrysimmons7084]

Beautiful board. Just getting into making these. Yeah, late to the game as always. Thanks for sharing.

[@keithdavison5578]

😅 for someone who is 12 you make a super cutting board but not good joke's 😅 I like you man keep on doing what you do brilliant An English man will do what you have done

[@leandrorodrigues2234]

Good Job 👏🏻😃🇧🇷

[@pb-bx1ll]

Great video thank you

[@burtgraham3689]

Nice board - one question for you - when I make these type of boards after I sand the board down I spray it with water to raise the grain and let it dry - then sand it with 220 grit. Then I apply oil - just a thought

[@raisinggrainwoodworking]

that handle was like throwing a hotdog down a hallway, lol

[@walterdavis8085]

How thick is the board. Would 2 inch be to thick to make a cutting board.

[@huntingpro8630]

How much do you sell the cutting boards for?

[@nickbrimwoodworking8279]

You’re a child! I love it. Ha

[@DanielDunlap]

Definitely have the mentality of a 14 year old

[@gregdietz3590]

Great video! I'm sure your wife's hand will fit much better on the larger handle. Go Hawkeyes!!

[@94ultra]

Have you considered using the CNC for the handle?

[@johnfehn4656]

No Wax? What type of wax would you use? It looks like to have some good toys, do you also have a laser engraver?

[@TeamProsperity]

What CNC machine do you have and how you like it?

[@BruceAUlrich]

The board looks fantastic! Do you think just making one cut in the pith is enough to stabilize it? I probably would have tried to cut more of it out, so I’m curious of your experience.

[@DanielDunlap]

I made a cut and then jointed it completely out. It’s in the video. 😉

[@BruceAUlrich]

@@DanielDunlap You only showed a pass or two at the jointer so I couldn’t tell.

[@DanielDunlap]

@@BruceAUlrich I assumed it was inferred what I was doing. 🤷‍♂️

[@GavinConwayWoodworkBBQ]

@@DanielDunlap how much did you remove? I didnt realize you took much out - I also thought it was just a cut and plane a strasight edge on it.

[@dottiewentz5121]

Why would you cut the wood in half and then put them back together

[@JohnPaul-sg4bs]

I watched a man on a construction job die one day, using high pressure air to blow dust off his body. He had a small cut on his hand, an air bubble entered the cut and traveled to his heart and killed him on the spot. I do not know if that blower you was using would have enough pressure to be a problem or not, but why take a chance. May the Good Lord take a liking to you!!!

[@avenger429]

You need new saw horses. Also, do you add mayonnaise to the Walrus Oil or does it come with it already mixed in?

[@DanielDunlap]

It comes premixed

[@dougward6669]

Good video but you didn’t pop the grain. Could be a problem down the road.

[@johnjss]

Got to put the hat into safety mode! (Aka backwards) 😂

[@DanielDunlap]

Yessir!

[@fredgonzini7099]

I have made these boards and I love it. Then I go to a home goods store. You can find these for $20 It's makes me not want to make them. It is nice to give my homemade ones to family.

[@ElCidPhysics90]

Following bc you’re the first person I’ve seen taste the glue. I mean you gotta follow after that, amiright

[@DanielDunlap]

This guy gets it

[@wilhelmtaylor9863]

"Tangy"? Funny, my gf told me that once.

[@johnschuster9192]

Bitchin board Mr ! Great video,and I wouldn't ever do over... who would know?

[@jamesfleming1643]

Yep, too many “she said” jokes. Otherwise, good video

[@franka5416]

you need new sawhorses

[@drumunl]

Not enough time spent talking about the 90s, but otherwise a very nice video.

[@DanielDunlap]

🤣 maybe next time!

[@georgemccormick1247]

Most beautiful in the universe, sorry not even close. Click bait.

[@brplatten1273]

Sorry but I can not subscribe to your videos. I like my eardrums too much and turning up and down the volume because of the stupid music, I can't take it sorry I like your videos but I can't do it I'll check in once in awhile thanks for this video?

[@darwing.proctor2629]

😮Your humor needs be clean up.