Making a Wood Wine Gift Box - woodworkweb

[@motrebal]

I like it, its the sort of project that gets us newbies some cred, everyone would love to get a bottle of their favourite in this box

[@Cookiescupcakesandcardio]

This is awesome Colin! I know someone who could put this under the tree at Christmas for me...now if only he had time to use the table saw....

[@wallykellett2048]

Don't listen to those prats sir. I watch your videos because you are an excellent teacher. Thank you

[@knecht105]

No particular reason, just don't happen to own one yet, but I have used them and they seem to work fine. I do know that some of the angles I shoot at, my hands seem close to the blade, but in fact they are a safe distance. I never run wood if I even think it might be unsafe.

[@l3ender15]

This would definitely be a great gift

[@knecht105]

A few viewers have made them by now and it sounds like they are getting good responses from theirs too ... it's a fun, easy project. Thanks for commenting ...

[@brennanquick4554]

Thank you, my grandma is going to love this

[@knecht105]

Great to hear ... sounds like your Grandma has a pretty nice Grandson too !

[@hansdegroot8549]

Beautiful box and very well explained how to make it. Thanks for sharing.

[@knecht105]

There ya go ... projects like these are very cool because the attract a lot of attention Thanks for commenting Colin

[@plshuler]

Wine gift box. Thanks for idea. Built one and love it

[@knecht105]

Hi Paul ... very good, thanks for commenting Colin

[@charly2.0]

Very good idea, I'm going to build one right away. Thanks for sharing Colin. Regards from Mexico.

[@Robbymcgee]

Great project. I made it, and it turned out beautifully. I took a commentor’s suggestion and cut strips for the bottom using the bits left over after cutting the side pieces. It looks “finished”. My only problem was properly installing the hinges, that was a real challenge. Thanks again for the great project.

[@jinslay1]

Gday your video is concise and to the point you dont ramble on like some people explaining the steps to finish a project this is relatively simple in design thanks for the video and keep making them

[@knecht105]

Thank you for taking the time to comment, and for providing us with valuable feedback. We work hard to try and provide useful, easy to watch videos and are still learning and working to make them better, so your comments help us with that. Many thanks :) Colin

[@brianjorch]

Beautiful box Colin, thanks for sharing!

[@knecht105]

Hi Carlos, you might need to make a couple of them ... I am finding it pretty popular :) Colin

[@knecht105]

Thanks for commenting Roger Colin

[@racma8698]

Very good idea, thank you.

[@smurphdog898]

This is great! Thanks for sharing with us!

[@knecht105]

No prob ... thanks for commenting Captain :)

[@roysuherman6105]

Captain Machine..waow how r u doin,thats good job haa...and Mr Wood got everything,like the tools,very2 complete

[@gmaent1]

What a great idea! thank you for sharing.

[@knecht105]

Hi Tom, thanks for posting and for making some very valid points :) Colin

[@yraggrebdnul]

Wonderful that you appreciate the detail on this project. Good woodworking sir.

[@knecht105]

Hi Gary, well thanks for noticing that, and for taking the time to comment :)

[@knecht105]

Hi Brian, thanks for the note :) Colin

[@knecht105]

Hi John, yes it is, and it's a fun project that doesn't take too long and you get to use a whole bunch of different tools and make all sorts of changes to the original idea. Thanks for commenting Colin

[@colinfarrier3668]

Hi Colin, Please tell me why you are not using a Gripper push block at the table saw? Colin Farrier Big Jig from larne

[@knecht105]

Thanks for posting :) all the way from Portugal !!

[@Kinq_Blox]

A great design and a good opportunity yo use scrapes of wood. Make it wider then you fit two or more bottles inside

[@tiagopaisana6426]

Thank you Tom for the great idea. I´m from Portugal and i love woodworking! See you! Tiago Paisana

[@cetjberg]

I just got around to viewing this video. Excellent design. Charlie

[@knecht105]

Thanks for watching Charles!

[@knecht105]

Thanks for commenting ... Colin

[@rustytoolman4912]

This is a nice project, thank you!

[@knecht105]

Thanks for taking the time to comment .. yes, and people like it even better when it comes with a nice bottle of wine :)

[@kentuk552009]

Gr8 build. Thnx for the video how-to

[@knecht105]

Hi Roland ... thanks for your note :) Colin

[@BackyardWoodworking]

Nice build Colin. Thanks for the insight. Roland

[@johnmyles2439]

I Loved it, very nice work!

[@GalaXy808]

What type of nail gun are you using for that type of wood

[@KedaWoodDye]

Great idea! I love it! I think I will hit it up with some wood dye just to add a touch of elegance. Thank you again, you just earned a new subscriber!

[@wombat170170]

G'day I like it think I will make a few on them thank you from Australia

[@knecht105]

Perfect :) ... maybe you could post some pics of your version of these, we would love to see them Colin

[@robertkeefe1557]

Wonderful video again as always.Keep up the good projects love the videos and awesome presentation.GOD BLESS

[@knecht105]

Robert Keefe Thanks you Robert, glad you enjoyed this, thanks for taking a moment to give us feedback Colin

[@Ujoey54]

Very nice job clean and very professional I do a few wooden things including rocking horses when I have time and I love working with wood mind you I am a first class welder .

[@knecht105]

Ujoey54 Yikes ... I could use someone like you around the shop :) ... I often need to get things welded, have my own welder now, but I'll bet you could give me some decent lessons, which I need badly ... lol ... great to have you with us Joey Colin

[@Linomedosevic]

good camera,very good sound,you are a very nice person.Love the video. Greetings from Croatia

[@knecht105]

lino medosevic Thanks for the feedback Lino, I have not been to Coatia, but would love to visit you wonderful country one day ... thanks for commenting

[@jillbates1094]

hi there,just watched the programme ,its a great job.if you were to sell them on to a customer how much would they go for.phil wales uk.

[@Hunt904]

could have done a magnet closer like on some cabnets

[@594MIGUELON]

very best with Rioja wine or Rivera del Duero wine.. Thanks for your videos from Spain.

[@knecht105]

MIGUELON594 Will keep that in mind ... thank you to you in Spain with your excellent wines

[@josephgrzelak5165]

How wide are the top pieces

[@jmurray7521]

wonderful work, give me great ideas for my floral shop wine gift section****thank you

[@knecht105]

Very cool ... thanks for commenting J ... Colin

[@tkotlarz]

Wonderful video, easy to understand and a great project to do with anyone! keep it up! Merry Christmas!

[@knecht105]

tkotlarz Thanks for commenting, and Merry Christmas to you as well ...

[@geedubb2005]

Colin, Thanks for sharing this sweet little wine box. After doing a few, do you think some type of latch is needed? Just curious because I'd like to make a few but don't want to take the chance of it opening when carried and having a mess. Thanks again!

[@knecht105]

Yes, a latch would really add this project. I was going make a nice wooden one but it would make the vid too long. Would love to see some some pics of yours with the latch :)

[@geedubb2005]

ok, I'll roll it around in my brain a little and see if I can knock something out. I have to lay some tile over the next few days, but once I heal from that I'll try one.

[@geedubb2005]

you probably think I'm an armchair quarter back but I'm really not. I do want to make something similar. The grape and wine business is really growing in my valley (Mesilla, NM) and you can even check my website at 5967traders.com. I'll get back with you when I hammer one out. I just don't know how to send you the pictures and I'm a computer dummy and not into posting videos yet. Thanks!

[@knecht105]

Gee Dubb Sounds good to me, I think it would do well ... hmmm, seems like I need to take another trip to NM. Wine country you say, looks like a lovey place, must put it on my list :).

[@geedubb2005]

Thanks Colin. What parts are you in? If you want, I'll send you a piece of pecan wood so you can make one out of it

[@kennyc388]

Hi Lee.....Can you please tell me what brand of compressed air nail or pin gun that you used in the video?? Thanks, Kenny C.

[@putinich]

nice gift box ) thanks! i'll try to do the same on next week. but i think add some smallest lock on the front side :) from Russia with best regards )

[@knecht105]

Greetings to you in Russia, yes a small lock would be a great addition :)

[@knecht105]

lol ... all things in good time JJ :)

[@josephgrzelak5165]

What about a clasp for front.

[@Warndog9]

Cool project! I like it. I know just the person who would love it too! thanks :D

[@jlgoins64]

the inside of the top looks to as if it's a solid piece of wood...could you explain please??

[@knecht105]

Hi Lee, the inside is the same and the outside, but what might make the difference is that because all the strips are tight together on the inside of the curve, they might look more like one piece. I think that's what you and your sharp eyes are seeing :) Thanks for commenting Colin

[@jlgoins64]

WoodWorkWeb Thanks for the reply, I didn't know if you had done something special and just left that step out....thanks again.

[@rodolfojosebravocaballero2023]

El Diseño es muy original, se puede usar como cofre también felicitaciones por el proyecto. Rudy del Perú

[@knecht105]

Gracias Rudy por comentar, no tenemos muchos suscriptores de Perú. Tengo la esperanza de visitar el Perú en los próximos dos años, ¿qué parte del país es usted adentro

[@rodolfojosebravocaballero2023]

Del puerto del callao, venga a Machupicchu-Cuzco. Lo esperamos.

[@zekeriyaterzioglu8028]

güzel bir çalışma.Elinize sağlık.

[@knecht105]

Zekeriya Terzioğlu Thank you for commenting

[@peger]

Cool but i don't like how the bottom looks. Definitely I would add box latch.

[@josalynmarie5020]

Hi I really want to make this but I don't have any wood and the supplies

[@Andy-in8ej]

Moron

[@charliewood4158]

Very nice I think im going to do this ill do about 20 at a time That's the way I like to work Thanks ill let you know how it works for me

[@knecht105]

Charlie Wood Perfect ...

[@hansdegroot8549]

Did it work for you?

[@alx122012]

this is awesome :D

[@knecht105]

Thanks Alex ... it's pretty easy to build too. It's not my design but I liked it when I saw it and thought it would be a fun project to make. Thanks for taking the time to comment .. Colin

[@FzMonsta]

I always use Heinz Mustard Glue

[@knecht105]

lol ... cool, I bet you are buying glue in bulk like me :)

[@markohnatyk3400]

Круто

[@glencrandall8334]

I just found this video. Very nice design. But as others have mentioned the lack of detail on the bottom is a shame. Also the lack of a latch. If you didn't want a latch you should have gone without hinges. Last: try eliminating the words "actual" and "actually". They do nothing for the description.

[@plshuler]

Wine gift box. From S.c.

[@mkozzokm]

all that work, but I think the bottom looked hacked.

[@farukvarol8851]

mükemmel...

[@knecht105]

Faruk Varol Thanks for commenting

[@mikejancz]

Band saw a dusty tool? WTF are you talking about? It's one of the least dusty tools anyone might have in their shop. The blade is 3/32 or at most 1/8. I'm not saying this is not a neat project, but check the dustbin on your bandsaw compared to your table saw at the end of equal cuts. Bandsaws make 1/2 the dust.

[@knecht105]

HA HA HA ... better get on board dude!! ... bandsaws ARE one of the dustiest tools in the shop, even worse, they create all the fine dust which is even worse. Check it out !!

[@mikejancz]

WoodWorkWeb They draw all the dust straight down though, away from your face. Bandsaws are the easiest stationary tool to set up dust collection for. Sneezing at the table saw is a regular occurrence, at the bandsaw, not so much...

[@nb12237]

it needs a lock so it wont open by it self

[@bpk77khan21]

That was a poor quality finish on the bottom, why did you not cut the strips to the full length and width and mitre the corners.....some sort of clasp on the closure would have been a good idea.

[@acetraver6346]

great job butt to long

[@winmichaels3288]

Not very well made, rather crummy in my opinion

[@knecht105]

Win Michaels Ah ... that's kinda the point, it's supposed to be a step up from a cardboard box, not meant to be a work of art.

[@winmichaels3288]

Ok just thought it could be made better in the same amount of time using your procedures

[@leopondernascimento9909]

very good