Рет қаралды 169,622
New year, new guitar project. This one is for Ivan Dečak, frontmen from Group "Vatra" ("Fire"). Throughout the video, You can hear them play on this very instrument :D .
This build spans over the period of last couple of months.. We tried to keep the wood combination from spring guitar because the sound was great but also go for a different look, black stain under high gloss polish.
The wood we used is american maple and mahogany veneer for the neck-thru core and black ebony for the fret-board and diamond tail piece. Pick-guard and battery cover is made from three layers of laminated mahogany veneer. Top of the body and head is covered with birch root veneer which really resembles small flames. fret-board Inlays are made from white epoxy. Nut is made from cow bone. For gluing we used pvac glue. After staining the guitar in black nitro stain, it was sprayed in 5 coats of polyurethane primer to fill all the pores. After each spray, the surface was sanded with 400 grit sandpaper. After 5 primer coats, I sprayed black burst along the edges, also lignum stencil was applied. After drying, 3 more coats of hard polyurethane finish were applied. For polishing, we used 3 progressively finer pastes until mirror finish was achieved. We used Schaller hardware, Fishman fluence electronics, jumbo frets and D'addario EXL 110 strings.
This was the most complicated guitar build we did so far and if you have any questions, I would be more than happy to answer them in the comments!
Thank you for watching and don't forget to share, like and subscribe! ;D
Podcast where I talk a bit about guitars: • Relax Room Podcast #2 ...
My instagram: www.instagram....
My facebook: / lignumchannel
Website: www.lignum-art...
Music: Jam session by "Vatra"
/ vatra_official
Intro music: Danse Macabre - No Violin by Kevin MacLeod is licensed under a Creative Commons Attribution license (creativecommon...)
Source: freepd.com/Clas...
Artist: incompetech.com/