be sure to go watch the second half of this video here: • I Tested the World’s T... Help me make videos by donating here: / codyslab Instagram: / codydonreeder SubReddit: / codyslab Twitter: / codyslab
Пікірлер: 1 300
@Ferovax2 ай бұрын
Ok. Now make it from mail
@rusinoe83642 ай бұрын
I can make you an email chain
@y__h2 ай бұрын
agreed just send it
@hello75332 ай бұрын
Then make mail, from chainmail
@digitalairaire2 ай бұрын
Perhaps a chain letter
@custos32492 ай бұрын
Plenty of material if ya stop paying student loans.
@jacefritzler51922 ай бұрын
Now extract the zinc from the acid and put it back on the chain
@nobodynoone25002 ай бұрын
"Can you take the stain of this shirt and put it on that one? "
@jacefritzler51922 ай бұрын
@@nobodynoone2500 lol I wouldn’t say shiny good looking zinc that prevents rust is a stain but you do you
@The_Keeper2 ай бұрын
That should actually be easier than you think. All he'd have to do is, neutralize the acid (and that might not even be necessary) then use the resulting liquid as an electro-plating solution. No need to extract the Zinc first.
@Broockle2 ай бұрын
Extract the Zinc from my cHiCkEn SoUp 🙃
@jeremymcadam74002 ай бұрын
@@jacefritzler5192 sounded like some kind of a joke to me
@emi96432 ай бұрын
i gotta admit the idea of a chailmail doormat would be kinda awesome for a workshop
@General12th2 ай бұрын
Welcoming or terrifying? You decide!
@Tony-op6xf2 ай бұрын
Worlds most durable doormat 💪🏽
@Broockle2 ай бұрын
i have definitely seen those before. Prbly smaller links though.
@carlosgaspar84472 ай бұрын
@@Broockle yup. including as mud flaps.
@AFMR04202 ай бұрын
I have seen ones that are hard rubber and chain mail. Cleans dirty boots with every step.
@WaterjetChannel2 ай бұрын
This looks like so many hours of work lol. Thanks for letting us torture test it😏
@Stevie-J2 ай бұрын
Cody is more about the process, WaterjetChannel is more about the spectacle.. perfect collab! Love it! 😄
@digitalairaire2 ай бұрын
Cleaning out all Walmarts in the state of chain? Already a great start
@MuzikBike2 ай бұрын
The State of Chain is the best place in the USA and you cannot prove otherwise
@sketchy10182 ай бұрын
Imagine being in the same state as Cody and wanting to get some 2/0 chain “Damn this Walmart is sold out, maybe I’ll try this other one” “Them too? Damn lemme try another” 10 Walmarts later “What the fuck, who is buying all this chain”
@rickymack012 ай бұрын
@sketchy1018 why didn't he try harbor freight? 😮
@semakajohn26992 ай бұрын
@@sketchy1018 Its the new toilet paper
@keeganchick21712 ай бұрын
I'd be a bit surprised if Cody isn't on a watchlist by now.
@HighLordComedian2 ай бұрын
I really appreciate that you haven't changed how you operate in these videos. Stripping zinc off a chain? No fancy vent hoods or anything just a bucket outside. Really makes me feel like I could do these projects and makes what you teach connect easier to me.
@mrkrusher292 ай бұрын
I think youre almost at a problem thats common in DIY and our society at large, we tend to think 'whats the best way to do this?' and the restrict ourselves to doing just that without considering there is probably a much more accesible, less resource intensive and cheaper way of doing something.
@xyphold2 ай бұрын
The problem is the people who make these videos are usually highly educated in the field and know how to do it safely. Even if it looks like they're doing it in their back yard. Many things aren't explained because it's not entertaining or they do it subconsciously. This video is more on the side of doable though.
@Xyz467862 ай бұрын
It’s people like you that are the problem. “I could do this!” 🙄
@xyphold2 ай бұрын
I should add, you can do pretty much anything at home that's where most of this stuff was invented but definitely do independent research. Make sure what you're doing is safety, learn how to dispose of chemicals properly, and make sure you have multiple sources outside of just KZbin videos.
@TheMonkey7472 ай бұрын
That Mail would rip the mountings out before it failed Structurally. Well Done, Cody.😮😊
@NorthernChev2 ай бұрын
"Of COURSE... that zinc coating is gonna HAVE to come off". Classic Cody.
@GaiusCaligula2342 ай бұрын
What do you mean
@Beardqt2 ай бұрын
anyone else irrationally hate zinc in general? like it's even the worst tasting thing ever
@GaiusCaligula2342 ай бұрын
@@Beardqt no
@Beardqt2 ай бұрын
@@GaiusCaligula234 ok sorry
@Blewlongmun2 ай бұрын
@@Beardqt I like Zinc, it's like a weird uncle to the ferrous metals.
@Ultracity60602 ай бұрын
This gave me an idea. Copper mail curtains, with a ground line to the curtain rod. Faraday drapes. Faradrapes.
@scottshawn702 ай бұрын
Yes! I live in Detroit.. chain mail curtains will be great for drive bys!
@sgtbrown42732 ай бұрын
😂@@scottshawn70
@ishnifusmeadle2 ай бұрын
@@scottshawn70and for when the local junkies need some scrap copper for their fix.
@CandlemancerАй бұрын
@@ishnifusmeadle that's why you electrify it
@Voodoo_RobotАй бұрын
Fara rape..uh...wait a minute
@dancingbadgers2 ай бұрын
Never knew how much I actually needed a Chain-Chainmail blanket , Reduces my anxiety of from constantly thinking people with sword cannons are gonna get me in my sleep and doubles as a therapeutic weighted blanket. Can't thank you enough Cody, your doing Gods work.
@AbsoLucas2 ай бұрын
When Iron is heated it's grains takes on a variety of crystal structures at different temperatures, if allowed to cool slowly (annealing) the metal reverts back into it's plastic pliable form, when heated and quenched suddenly it locks the iron into what's called face-centered cubic lattice locking all the atoms in place making the metal harder.
@phoenix.86792 ай бұрын
Yes, but actually no. It's not getting locked into face-centered structure, you only need that because of its higher solubility for carbon in that structure. You can tell from hardened and tempered steel being magnetic, while the face-centered structure is non-magnetic (see stainless steel with high nickel content).
@AdventuresOfKeithius2 ай бұрын
I need to learn this sacred science...
@Splarkszter2 ай бұрын
Haha. It's cool that i've just learned these fancy words recently on university.
@Splarkszter2 ай бұрын
@@AdventuresOfKeithius Take some Materials Science course :)
@renehuber90962 ай бұрын
1. Heat steel above certain temperature 2. Steel becomes austenitic (face centered), which has high carbon uptake 3. Quench 4. Iron rapidly reverts to body centered crystal structure which has lower carbon uptake 5. Carbon atoms don't have enough time to diffuse out of the crystals since diffusion is a rate and temperature dependent process 6. Carbon is forced to stay inside of the body centered crystals and creates compressive stresses, which increases hardness
@nickjensen52642 ай бұрын
Codys Lab is the best youtube channel, especially among the makers. I love how he just does whatever he wants, its always informative and fun to watch, and there's never any filler or clickbait. And he's just an awesome person. Thank you Cody for all the great content over the years, I will always look forward to your videos.
@cornelius29932 ай бұрын
I have to admit that I sometimes don't understand half what he's talking about. But for about 10 years I'm enjoying these videos like no other. They leave you with a special feeling behind.
@matthewsemenuk75442 ай бұрын
Very True!
@goten2831Ай бұрын
couldn't agree more
@brindynschultz2 ай бұрын
Hey Cody, when you're quenching the material, it's better to move it up and down in the water, because if you just place it in the water bath the immediate liquid around the hot metal will create a bubble of vapor around it which will prevent the water from being as effective as it should quenching the material. This is what many smiths are taught, so if you watch videos of them forging things, this is why they sort of bob the material in the quench bath.
@ChildrenOfOwls2 ай бұрын
I never knew that but that makes complete sense. Thanks for the advice
@F0XD1E2 ай бұрын
Would he pretty dangerous for him to hold onto it considering it was splattering boiling water all over.
@redcastlefan2 ай бұрын
I assume it would be hard since theres so much metal in this project
@VoIcanoman2 ай бұрын
This is far more of an issue for an oil quench than a water quench. Yes, the steam jacket forms in both quenching media, but water vapor is still very heat conductive, and will therefore still cool the metal quickly. The Grossmann H-Value (a measure of quenching intensity) for water without agitation is 1.0, while the same for oil without agitation is 0.25. An oil quench with violent agitation (which is beyond what most smiths will ever do, and probably impossible to even achieve with a workpiece as large as the one Cody was working with here) is around 0.8 to 1.10, which means that the highest cooling rate possible with oil is roughly equivalent to the cooling rate of water with zero agitation. Extrapolating this principle, an oil quench with moderate agitation (which is what most smiths will use), with an H value of 0.4 or so, produces significantly slower cooling when compared to a non-agitated water quench. Moreover, using water AND moderate agitation produces an H-value of 1.3, while strong agitation has an H-value of 2.0, and violent agitation can get all the way up to 4.0 - all of these options cool the steel far faster than oil ever could, and thus the more you agitate in water, the more likely you are to risk shattering your workpiece.
@JackHackaday2 ай бұрын
Yeah blacksmithing is hard.
@KooroshBabaee2 ай бұрын
Million years from now scientist could locate your house by detecting all those chemical trace in one location .
@niall_sanderson2 ай бұрын
Cody’s properties could be declared a superfund site at this point
@Skorpychan2 ай бұрын
Even a couple of thousand years from now, Chickenhole Base is going to confuse the SHIT out of some archaeologists.
@markc5322 ай бұрын
They will probably conclude it was evidence of aliens which explains most of man's 21st century advancement
@FleshWizard69420Ай бұрын
"detecting trace amounts of everything but the kitchen sink"
@EugenssonАй бұрын
Well, this is pretty much how anthropologists and archeologists identify where the smith's house of a settlement was. The soil samples and residue metals, coal, slag, etc.
@kailoveskitties2 ай бұрын
Oh man that looks like the best weighted blanket ever
@whatbroicanhave50character352 ай бұрын
Need to put a cloth backing on it though for sure, chainmail loves to pinch ya. Most weighted blankets I've had use steel shot. This one might end up a bit too heavy to be safe lol
@oz_jonesАй бұрын
@@whatbroicanhave50character35 The only weighted blanket youll need for the rest of your life 😅
@nazamroth84272 ай бұрын
For the love of god, people. If anyone tests chainmail, put padding under it. You never wear chainmail without padding. It is both for comfort, and is also an integral part of the defense.
@nobodynoone25002 ай бұрын
yeah, but tits under chainmail is a V I B E
@johnbennett14652 ай бұрын
What you say makes sense. It is just that historically chain was used over normal clothing in some times and places. I don't know why.
@MyDaoust2 ай бұрын
Did you forget where you are?
@JackHackaday2 ай бұрын
Silks were used to fret arrow heads where weight considerations forced looser weaves. Still, almost always cotton pads for cooling comfort and shock absorption.
@The_Keeper2 ай бұрын
@@johnbennett1465 Probably for monetary reason. I guess some people could either afford a gambeson, or a chainmail, and had to choose. I'd go for the chain as well. Sure I might get pinched and bruised, but at least I won't get stabbed or slashed.
@brandonfrancey55922 ай бұрын
Chain mail screams "I have nothing but time on my hands."
@niall_sanderson2 ай бұрын
I have zero doubt that Cody could survive in any post apocalypse setting
@MrKfadrat2 ай бұрын
id like to point out the marvel of insulation here, you have glowing red steel, and right next to it there is unmelted snow. its couple of cm
@LukaSauperl2 ай бұрын
When I was learning welding they would always say that a correct weld is stronger than the rest of the metal!
@dakotareid15662 ай бұрын
Same with woodworking and wood glue
@Dr.JustIsWrong2 ай бұрын
Pretty sure they didn't mean spot-welds..
@JackHackaday2 ай бұрын
Again, that weld is high carbon because co2 in air. As long as tempered, strongest part.
@Dr.JustIsWrong2 ай бұрын
Oh, I was ref to the original chain..
@LukaSauperl2 ай бұрын
@@Dr.JustIsWrong Neither was I. 😊
@LordStarbeard2 ай бұрын
Nice Iron Curtain, Cody 😂
@graemepennell2 ай бұрын
Invest in a head camera. I enjoy the 1 handed working but you seem to struggle more than you need to 😊
@the_newt_nest2 ай бұрын
No. Cody must have the best science and the worst camera work.
@ChIGuY-town22_2 ай бұрын
@@the_newt_nest😂😅😁
@priyanshugoel30302 ай бұрын
Head movements for camera might cause nausea for the viewers.
@stealdst2 ай бұрын
Welding with a torch and no gloves, what an old school king
@michaelroberts10642 ай бұрын
Is this like stick welding just using a torch instead of a welder?
@dave70382 ай бұрын
@@michaelroberts1064 Yep, that appeared to be standard oxyacetylene welding. The torch melts the base metal and the rod provides filler. The burning gas produces carbon dioxide that provides some shielding to reduce oxidation. It's a fun process, quiet and calm, but not quite as clean as TIG.
@michaelroberts10642 ай бұрын
@@dave7038 thanks for the explanation. there's a lot i don't know about tools and how to make things, but i'd really like to learn more, and i appreciate it when others share their knowledge.
@ofp85742 ай бұрын
If you ever want to do something similar to torch welding but don't have access to a torch and gas bottles, you can do something similar with an AC arc welder if you make a holder for a couple of carbon rods called an arc torch. Generating an arc between the two rods will produce a sort of flame that can heat metal without consuming an electrode or creating a deposit like stick welding. I've done that myself, and while it is less controlled than using oxyacetylene, it is great for doing torch style welding or for heating up metal to red hot. I bent a piece of cast iron using my home made carbon arc torch.
@tilidie52722 ай бұрын
imagine the poor soul who had to make these for a whole army back in the day
@operator80142 ай бұрын
Dude was probably just relieved that he didn't need to be IN the army.
@dposcuro2 ай бұрын
On the plus side...you would never really need to make like, thousands at once. Most likely blacksmiths/armoursmiths just made square patches like Cody did in between jobs, keeping themselves busy, and building up a supply to make a chain hauberk or shirt much quicker than if they started from scratch when someone ordered one.
@SuperAd19802 ай бұрын
That's what apprentices are for
@andresvalverde51822 ай бұрын
@@dposcuroPlus chain mail was super expensive, even after plate armor was invented. It would probably be akin to buying a car nowadays. You would be pretty well off selling one as a blacksmith. Most footmen relied on cheaper gambesons, which was much easier to produce and required no smithing.
@Leo.232322 ай бұрын
@@andresvalverde5182 expensive to make but also very recyclable and reusable, which makes it likely to be in a large supply which lowers the cost
@aserta2 ай бұрын
Chainmail binding is so therapeutic. Like sit in a sofa with a bucket on your left, bucket on your right and just adding bit by bit. It's fun. Better than TV, that's for sure.
@homosapien79356 күн бұрын
Ive seen your channel commenting around for DECADES aserta lol. We are legends
@intellectualiconoclasm32642 ай бұрын
Put some aramid layers on both sides, and you have a nice frag-curtain for dangerous tests.
@DryW4t3r2 ай бұрын
For when he‘s making explosives… again…😂
@intellectualiconoclasm32642 ай бұрын
@@DryW4t3r Or, you know, distilling stuff like alkali metals. Or precious metals, they both give off lots of fumes that can boom.
@NullScar2 ай бұрын
Can I ask what aramid is? I know how to google, but I prefer lessons in "plenum. "
@spookyboi8446Ай бұрын
Hollywood: "Sliced through in 1 cut" Reality: "Hacked and beaten to death by 100 hits over 7 hours"
@PG_Shaun2 ай бұрын
Cody is the only creator where I'm happy to see ads
@Ydnar11552 ай бұрын
He remarked one time he wouldn't add ads in a relpy to my comment. I wonder how much $ he lost not taking advantage of his early videos?
@joe6532 ай бұрын
@@Ydnar1155untill like November this year he had some massive drama with Google not paying him ad money. Could be related
@letabouret14872 ай бұрын
@@Ydnar1155 if i remember correctly he did monetize his channel at some point long ago but youtube seemed to absolutely hate his guts back in those days, constantly demonetizing, age restricting and sometimes even deleting his videos. at some point, probably during the ad-pocalypse, he just stopped trying to monetize his video probably becose it wasnt worth his time to try to make everything ad friendly just to still get demonetized for no reason. he might not even have reactivated ads, the ad PG-Shaun saw might be placed there by youtube and not cody, and if thats the case he does not get ad revenue from it, youtube takes it all. now he makes his own money with sponsors and patreon and thats much better than having to deal with adsense's tomfoolery for an income
@cornelius29932 ай бұрын
What ads?
@PG_Shaun2 ай бұрын
I meant pre-roll and post-roll ads. When he was demonized by KZbin that didn't happen
@SnowTiger45Ай бұрын
I'd argue your metallurgy isn't 100% sound but your concepts are right. In short, while carbon molecules are relevant, tempering an annealing has more to do with the alignment of crystals in the metal matrix. When metal is hot, crystals align themselves with each other. When cooled slowly the crystals can form or settle in a random configuration. When metal is cooled quickly, the crystals are all remain aligned making them strong. Cooling in Water can be problematic compared with cooling in oil. But it can be done and without a doubt the additional annealing worked great for chain mail armour. Great Video.
@AmbiAnts5892 ай бұрын
Assistant: and how many boxes of chain would you like sir? Cody: Yes
@MrPicklesAndTea2 ай бұрын
Cody is the man from the math text books
@the44thcosmic_galaxy252 ай бұрын
Cody's Lab. The channel where you can find pilot mars experiments that help NASA. And medival chain mail all in one place. I love this channel, Cody you've taught me a lot about chemistry and industrialization. And I wanted to say thank you for always making videos about stuff that you like, instead of trying to appease the youtube algorithm. Keep doing what you love
@gcewing2 ай бұрын
Next video, Cody develops chain mail light enough to send to Mars.
@RobDucharme2 ай бұрын
Make friends with problem solvers. They complain less and find solutions to problems or answers to questions, instead of sitting there complaining that life isn't fair. Cody's an absolute unit. Great video, as always.
@letabouret14872 ай бұрын
11:00 cavemen used to cook like this before they invented containers that can be used to boil the water directly. they heated rocks in a fire and placed it in thier water to boil it. when i saw the amount of water compared to the amount of steel i expected it to violently boil for quite a while
@ChangelingChain2 ай бұрын
You can also make a ribbon of Euro 4 in 1 by twisting the 2 in 1 chain until it binds and then linking open rings through the top or bottom (whichever side is lacking the rings in the binding pattern.) Could help save time in future endeavors, since you wouldn't have to cut and reweave so many rings.
@nikitanugent71652 ай бұрын
Not sure what you mean about twisting the chain, but he definitely could have reduced the weaving/welding time if he left 2/3 of the chains intact. (Not that the actual weaving was the time consuming part here.) Instead of opening 50% of the links, he could've only opened 33% of the links, reducing the amount of welding by a third.
@ChangelingChain2 ай бұрын
@@nikitanugent7165 I think we're talking about the same thing. But yes, weaving is certainly not the rate limiting step here.
@elongated_muskrat_is_my_name2 ай бұрын
would this make the diagonals of the kind of mail he's doing?
@ChangelingChain2 ай бұрын
@elongated_muskrat_is_my_name No. Instead, it would form the bottom and center of a single ribbon of mail. It's hard to explain in the context of a comment, as it involves some visuals. I might make a video on it sometime.
@DarkestVampire922 ай бұрын
Next video: "Making a powered exoskeleton to wear my chainmail"
@TheBackyardScientist2 ай бұрын
That must have been so much work! Good job it looks awesome.
@NorthernChev2 ай бұрын
I'd have put one arm of the bolt cutters in a vice with the other arm upward when cutting the links. This would eliminate the unsteadiness of the bolt cutter, reducing the risk of injury.
@princeofthesaber7642 ай бұрын
Dont let anyone tell you Cody cant weld.
@nobodynoone25002 ай бұрын
Maybe he can, but all I see here is brazing.
@doctorpurple51732 ай бұрын
@nobodynoone2500 how so?
@scotttod69542 ай бұрын
Unexpected collaboration. So happy for more CL videos.
@Tb0n32 ай бұрын
I love that last clip "No way Cody!"
@bentleyrowland12 ай бұрын
@@Tb0n3that’s me haha
@gemstone78182 ай бұрын
thats actually an impressive amount of work for linking chains together
@matthewsemenuk75442 ай бұрын
Soo much time and effort I'd imagine
@TheMisterbobman2 ай бұрын
Love all the chainmail vids!
@nobodynoone25002 ай бұрын
You can just leave the chain in a bucket of vinegar to strip it. Takes a day or 3, and be sure to move the chain arouind a couple times.
@whatbroicanhave50character352 ай бұрын
Potato patahto, vinegar is just dilute acetic acid. It'll just take a lot longer than hydrochloric.
@Brass_TaxАй бұрын
So glad you still make videos. Love your videos he had so much fun making them
@Hecker99742 ай бұрын
I missed your chainmail videos
@Theonekhaled12 ай бұрын
Nice to see a video that has the same feel as the good ol days😊
@MrMofis20 күн бұрын
So satisfying to watch, great idea too. loving your work Cody!
@WillFuI2 ай бұрын
Great video. This brings me back to the og chainmail videos
@Slavicplayer2512 ай бұрын
this channel is my alltime favourite no matter how i may change i think i’ll allways whatch these videos, thanks for all the great stuff cody! ❤ edit: the chain chainmail looks great!
@Juggling_necromancer2 ай бұрын
cody slab
@sylvann75012 ай бұрын
Love your smile and the glint in your eyes whenever you're working on a project
@AKuTepion28 күн бұрын
It's so fucking awesome to have you back at full strength, man! Love these videos.
@maksymushka2 ай бұрын
Just watched your video with the water jet channel. You made good chainmail dude.
@jjtb73002 ай бұрын
Yes more Cody
@bobbycone2Ай бұрын
The patience to do this is insane!
@faramund98652 ай бұрын
The symmetrical patterns looks very satisfying. And man, you’ve done a lot of work for a video!
@KnowledgeAbyss2 ай бұрын
love ur videos only 1 question tho why did u go to walmart for chain why not a hardware store u prob paid 2 or 3 times more then u should have for it would have been cheaper at a hardware store buying in bulk
@theCodyReeder2 ай бұрын
It was better chain. 🤷♀️
@punawelewele2 ай бұрын
Wal-Mart has better chain than hardware stores? Sounds like BS.
@Ac3Mustang2 ай бұрын
the audacity to say someone like cody is "bs'ing" 😂😂😂
@punawelewele2 ай бұрын
@@Ac3Mustang Not saying that he is, just sounds like it. It's hard for me to believe that Wal-Mart is the best place to buy chain.
@TrainYourBrain6212 ай бұрын
Like if you want Cody to be an Astronaut!
@weatheredraven300614 күн бұрын
It's good to have your videos pop back up in my feed!
@Kargoneth2 ай бұрын
Beautiful work, Cody!
@danward10702 ай бұрын
Mail means 'Chain' so most people are mistaken when they call it 'chainmail', that's like calling it 'Chain Chain', but yours is actually made from chain so it's probably the first true Chainmail or Chain Chain.
@brianhowe201Ай бұрын
@danward1070 - I think maille is more accurately translated as the french word for "mesh".
@Axolotine2 ай бұрын
the fbi must almost certainly think you're making a party favor with those boxes of chain
@user-lb3jw6jk1s2 ай бұрын
Before I ever paint galvanized steel I always swab the surface with a HCL moistened rag for proper paint adhesion. Hardened and high carbon steel rusts slowly. 1005/1020 steel, CRCQ steel & low carbon steel will rust quickly. The chain mail skirt on my suit of armour has flat links probably so the weld joint is over-lapped, heated, & pounded to fuse the joined ends together. Back then there was no oxy-acetylene torch & filler rod to weld links together. I would never have the patience to make chain mail. With that said I commend Cody for doing all the work on this video.
@bob28592 ай бұрын
I did not see that collab coming. I'm always here for Cody's Chainmail videos!
@CptKillsideАй бұрын
Cody really is our present day equivalent of an friendly next door alchemist who's showing us some new stuff he's been working on.
@csd563472 ай бұрын
You’re by far my favorite KZbin content creator. Never stop doing what you love and showing it to the world, you’re amazing Cody!!
@SlowlyMasterDeWhey2 ай бұрын
You're a smart guy Cody thanks for the content!
@dingusbingus85542 ай бұрын
thank you for not changing what youre doing cody. Youve been teaching me for a decade at this point and im glad youre still doing the same thing
@my4x4adventures982 ай бұрын
Loving the more frequent uploads keep up the good work
@michaeltalaganis65182 ай бұрын
Awesome video Cody! Keep up the great work!
@hutchgamer872 ай бұрын
Glad to see another great video keep up the good work
@foxriver91562 ай бұрын
Every minute was a surprise! Each cut showed way more progress than I expected, all the way to a collab at the end! So cool.
@jakeDalton-io5ybАй бұрын
You are doing great Cody. Inspirational stuff! You aren't afraid to try big things.
@luckybutunlucky89372 ай бұрын
You have been wearing chainmail like Goku wears his weighted training clothes. You can probably take on a Super Saiyan at this point.
@Kizmar2 ай бұрын
Crazy how good that looks after the heat treatments. It was all discolored and a little rusty in areas. Pretty cool stuff man.
@Golden_SnowFlake2 ай бұрын
That is so badass! great video Cody!
@UpLateGeek2 ай бұрын
That's pretty cool! I bet the hardening and tempering really made a difference to usefully tough the mail is at actually stopping stuff breaking it or getting through. Hope you got some oil or anti-rust protectant on it though, looks like some sections are already rusting.
@anzaklaynimation2 ай бұрын
It always brings me excitement when Cody uploades.
@tonycook234719 күн бұрын
you have some mad patience, my friend. great vid! and the ballistics vid was excellent as well.
@FoxGaming002 ай бұрын
Great to see you and the waterjetchannel still hanging out and making colabs!
@satoau12 ай бұрын
hooooly moly the amount of work and effort in this, and it looks just awesome!
@nero5922Ай бұрын
cant wait for more vids! you are an inspiration
@Aaron-fh6hd2 ай бұрын
Man it's so nice to have regular Cody uploads.
@the1stDDD2 ай бұрын
I used to make chainmaille, but I never thought of using chain to make it. The aspect ratio of the chain looked perfect for 4 into 1 European, and the welding looked spot on. Now that you have made chainmaille using comically oversize links, would be awesome to see chainmaille made out of comically tiny links.
@jasonpatterson80912 ай бұрын
Love it. Thanks for being you Cody.
@Schixotica2 ай бұрын
That’s so much work!! What a madman
@trex702 ай бұрын
Nice project. And a little Mythbusters vibes at the end. Thank you.
@samuelgeorge85242 ай бұрын
Your oven has a very interesting life Cody.!
@TheVerendus2 ай бұрын
Cody, your talent, determination, and dedication are truly an inspiration. Keep it up!
@oberonpanopticonАй бұрын
Really puts into perspective how much work medieval blacksmiths must’ve had to put on
@ToTheGAMES2 ай бұрын
I like the looping and reverselooping audio in the sped up bits :D
@flomojo2u2 ай бұрын
Great work, what a huge amount of time spent on a "Just for fun" project!
@Speeder84XL2 ай бұрын
Awesome! It got both strong and nice looking
@TheAttacker7322 ай бұрын
Afterwards, the chainmail could make a good catalytic converter guard for your truck.
@alcoshirts2 ай бұрын
I'm so happy Cody is back!
@hithereyou99912 ай бұрын
8:27 was the funniest moment. This video truly shows how dedicated and skilled and wildly experimental Cody Really Is
@Seneschaal2 ай бұрын
Finally, a weighted blanket heavy enough
@newtonbomb2 ай бұрын
Oh this was a collab with the Waterjet Channel too?! Nice! Was that your initiative or theirs? Either way, great to see that things are looking up for you again!
@travisyayes63432 ай бұрын
Good job Cody👍 That turned out awesome.
@leovalenzuela8368Ай бұрын
I love your work Cody
@JerryCan1012 ай бұрын
This man did what minecraft couldn't
@ahobimo7322 ай бұрын
Casually buying up all the chain in every Walmart in the state is so very Cody. I'm so grateful to share a universe with this man.