Making EASY carbon parts for GIZFAB. Carbon Wings using the skinning wet lay method. part 2

part 2 of a series of videos on Making Gizfab Micra lighter. Carbon Wings using the skinning wet lay method is a very simple way to make body parts!
check out ‪@GizFab‬ and his mad creation! you will not be disappointed a man is s sick fabricator!
Here is where i build the fastest Clio • Building the Fastest. ...
How I made rear arch extensions: • Making EASY carbon par...
How I made the bonnet: • Making EASY carbon par...
How I made the Roof: • Making EASY carbon ROO...
Milwaukee M12BPRT-0 Pop Rivet Tool
amzn.to/3JxTJqN
▶ All other consumables you can buy through my Amazon affiliate link: www.amazon.co....
▶ RuskiWeldShit official merch: ruskiweldmerch...
▶ find me on Instagram: @ruskiweldfab
/ ruskiweldfab
▶ Give my page on Facebook like and a follow! / ruskiweldfab
▶ If you are new on youtube and would like to grow your channel faster, a must tool is TubeBuddy! www.tubebuddy....
▶ Where I get my Commercial Music 2 Months for FREE! (ARTLIST):
artlist.io/Ily...
Beat provided by freebeats.io
Produced by White Hot
▶ Looking to partner with me? All Enquires to [e-mail]

[@alistairuysal1858]

Brilliant work. Good how you learned from the first wing where to improve the second wing. Good weight saving. They look a good finish to me. End of the day it’s a race car not a show car. Great work 👏

[@RuskiWeldFab]

thank you.

[@MisterMister-rz1zi]

Glue gun sticks if you cut them to length ..drill out the centre if needed and can be used as spacers behind the wings where you need to bring them out to suit the existing panels...they work great...nice work guys and great info for the diy guys ...lovin this👌

[@RuskiWeldFab]

great tip!

[@hall159]

Loving the work Ilya, great collaboration 🤘

[@RuskiWeldFab]

Cheers!!

[@TheRealKlinky]

I freaking love k11 micras!...when i was at university I was sooo broke - I bought a slightly dinged micra for £50 from a colleague at one of my part time jobs, who used it to teach her son to drive, hence the dings...I could barely afford fuel/insurance/road tax let alone service it so it went unserviced for 4 years & despite of which, it used to sail through its yearly MOT with only a hope & prayer on my part! Fantastic little cars!...I ended up giving it to my landlord in lieu of rent just as I started my first proper job out of university - he wanted it to teach his wife to drive. I'd like to think it's still cruising around, probably still not being serviced but stone cold reliable!

[@krodsgarage]

640g! nice! this is just the video i was looking for! ty

[@RuskiWeldFab]

Glad I could help!

[@6ixthstage845]

I want to do this for my MK2 Golf build. Nice job!

[@RuskiWeldFab]

You should!

[@6ixthstage845]

@@RuskiWeldFab I will be in touch with questions ❤️ Thanks for the inspiration. Subscribed!

[@6ixthstage845]

what was the first layer? dialene?

[@benhoshinji]

ilya, wicked content as usual. this style of video is excellent and i enjoy the TOTB and time attack coverage as well. keep it up mate

[@RuskiWeldFab]

Thanks mate

[@TuningShed]

Really interesting. I've got to get busy with some composites on my car soon. Glad I came accross your channel. 👊👊

[@RuskiWeldFab]

Awesome, thank you!

[@primeral]

fantastic content, gents. New subscriber from the States

[@RuskiWeldFab]

Awesome, thank you!

[@ninacossetto2283]

Top job, keep going guys🏆

[@RuskiWeldFab]

Thank you! Will do!

[@thunderousity]

Great job guys. Loving the vids. I'd be interested to see these tested at high speeds and whether you may need to strengthen them a little to stop them vibrating.

[@RuskiWeldFab]

Wings already been tested and they need nothing!

[@GizFab]

Can confirm it’s al good!

[@Exotic_drift]

@@RuskiWeldFab why you mad tho

[@eefui]

great job !

[@RuskiWeldFab]

cheers

[@kantorobo7718]

alright I will be doing this the coming weeks my wings are messed up might as well make new ones from carbon :)

[@RuskiWeldFab]

Hope you enjoy

[@feathersandtarmac6456]

Great stuff I’ll be having a good at this on my little mr2

[@hairyplotter1121]

Wait.. you’re making a k11 micra lighter? I wanna know what this thing weighs when you’re finished with it and is it the standard engine?

[@Kapil-Patel]

Insane weight saving, wish I can afford Ilyas expertees one day. Have you considered marking your parts with your logo on the inside ?

[@RuskiWeldFab]

i have! my roof has my old logo on the inside!

[@godzuki2099]

The carbon fiber showing on the surface might be a pro move... If it is bumpy enough it might work like the golf ball surface, who knows how useful that might be though

[@joeygodden]

Loving the videos, what are the extended arches off they look really smart

[@RuskiWeldFab]

sorry not sure to be honest. head over to @gizfab channel and ask him maybe

[@GizFab]

They are Nismo archs. old scholl stuff. We have the moulds for them.

[@minimumpfc]

@@GizFab Would LOVE a set, been looking for a year now. What do I need to do to acquire some :)

[@grantmeldrum]

What did youse lay down on the wing first ? Also was a release agent used ?im considering making a set for my car but looking at yours they came out great so any tips would be ideal

[@sandwich.entity3810]

Bolting the carbon against the nuts doesnt seem like a great idea to me. The small area that the clampng force of the bolt is spread over and the sharp corners of a nut is likely concentrating stress and would make the panel much more likely to break there.

[@RuskiWeldFab]

nah it works well to be fair

[@Choober65]

Why did you not vac bag the panels? I don't think you will get full strength without doing it.

[@RuskiWeldFab]

not required

[@kawataufeek400]

I need some help that car example to replace original bonnet to carbon fiber without labour just material how much cost to finished dollars thanks

[@markscarborough1018]

You're gonna need aero to keep this on the floor just to stop a light gust of wind from blowing it away when stationary!

[@RuskiWeldFab]

That's a great idea!

[@HK-uq9by]

Nice. they are just a bit bigger than the original

[@RuskiWeldFab]

difference is negligible on race car

[@grantvxr83]

Great stuff as always ❤️ is it possible to make more show car style pieces at home? I think some fancy Ruski Carbon RS4 parts videos 😘

[@RuskiWeldFab]

yeah. just needs more time and effort with polishing etc

[@corahughes7768]

Peep tha Rays RE B51's on tha Fozzy STI in tha back ground :3 Looking good! Ah got some on ma JDM 91 Legacy wagon turbo :P JDM only WRX/STI Limited wheels. Quite rare stock wheels. Fer those ah ye who dinnae ken bout them.

[@RuskiWeldFab]

Right on

[@hondahacks1014]

You shouldve covered it in peel ply and it wouldve been smoother right?

[@RuskiWeldFab]

yes if "dry carbon" is the look you going for.

[@jameslee1374]

This the same techquie people use to make carbon Lay overs on trim pieces ?? Beside removing the carbon trim, it just stays on the trim pieces then clear coated. Also how xome you guys never clear coated tge carbon after ??

[@RuskiWeldFab]

Correct. Process is the same. We wanted to save weight. Hence no clear coat

[@johnrobie9694]

Nice work, but all the camera movements were making me nauseous.

[@Mannin_Watch_Time]

Amen

[@getthecats]

Weak

[@kawataufeek400]

Hello I need to learn how to make car body parts in carbon fiber ? Any course or you can teach me I can traveling there where you live Then can buy all equipment needed I want open business in my country in Iraq

[@vicleyend812]

Hey guys could you please share a link where I can buy the roll of Carbon fibre layer and all the other stuff?

[@RuskiWeldFab]

@easycomposites

[@rickarda9232]

what foam do you use that doesn't melt from epoxy cure?

[@gfroudy]

What did you use for the bottom layer? I have tried to search for it but I can't find anything with that name

[@gfroudy]

The captions spell it as darling but I don't think that's correct

[@RuskiWeldFab]

its called Diolen. but you can use e-glass as well

[@junioral9451]

I want to make carbon fiber for my car as a project and I have no clue of anything. When i saw how the carbon fiber wing was done I was like thats terrible quality but theyre just the side wings, if it was the door i would have been like yeah they going to die.

[@anthonybryantmedia]

One thing to consider is they did one layer with epoxy to get the shape. Cured then put on the car. For a quality finish you would then do 3 epoxy coats to get that carbon finsh you are thinking of.

[@psycho3344]

Bit of a random question but what do you do if the bonnet you need to skin is from a larger car ie "Toyota supra" that you cant get the carbon cloth to cover the whole bonnet? If you skin the bonnet in x2 lengths of 1200mm carbon wouldn't you see the join/overlap in the center? Would you have to make a mould first in fiberglass so the overlap would be then on the inside of the bonnet?

[@RuskiWeldFab]

overlap will be on both sides. you just have to make it a very neat one. or find 1.5m sheet

[@psycho3344]

@@RuskiWeldFab thanks buddy! I want to do the upper layer of my dashboard in carbon but I want to try and save the dash from being damaged as its rare and in good condition. Is there a way I can take a mold from it without damaging it? Every tutorial on yt people doing dashboard they always ruin/sacrifice the dash to build one in carbon

[@RuskiWeldFab]

Wrap it first.

[@Divorceization]

So the layer you apply to the panel so the carbon panel can be removed is called eglass? Or diolen?

[@hondahacks1014]

Its pva

[@petertaylor7134]

A nylon spacer would be better

[@RuskiWeldFab]

agree

[@kevinkev1530]

👍🏾👍🏾

[@RuskiWeldFab]

👍

[@catalinosolorzano7054]

Can you share the product you use to make this please where can i get this stuff

[@RuskiWeldFab]

@easycomposites

[@Dansgotasti]

How much does the materials cost to do 2 wings

[@RuskiWeldFab]

It really does depend. We bought in bulk to do everything. So hard to say for sure how much just for the wings

[@Dansgotasti]

@@RuskiWeldFab no worries cheers for getting back to us

[@spazda_mx5]

650g

[@spazda_mx5]

He shoots, he scores!

[@RuskiWeldFab]

hahahah! right on the money my friend!

[@spazda_mx5]

@@RuskiWeldFab And I didn't cheat! 😇

[@krodsgarage]

1.1kg?

[@RuskiWeldFab]

for the pair haha

[@quattroNIK]

Братуха, ты русский?

[@RuskiWeldFab]

ага 😉

[@AshLongie]

When it doesnt look like you expected lol Been watching loads of carbon pannel builds your way os defo easier and cheaper but the finnsh isnt 100% but i guess ots application based race car not show car 😂😂😂😂😂

[@dextercarrie8131]

This is not the way to make carbon parts.

[@RuskiWeldFab]

Hold my beer 😂

[@beefybmw9532]

It says easy in the title… who needs to waist time on molds when you have the fenders