★ Making Foot Pegs With Integrated BRAKE LIGHTS

[@danielmoore8320]

Awesome foot pegs! don't forget some little grommets or seething over the wires, don't want the wires to rub and cause a short.

[@danielshayder8875]

Omg! I need a set of these for my triumph build. Please sell these.

[@CafeRacerGarage]

Thank you mate

[@EddieMorley159]

The knurls on the one that ‘wasn’t right’ is how that tool is meant to make them! I bet they’d look like the black original ones

[@YasirAli-yj7ie]

Thanks man you guys are doing such a great job. Its not just for yourself but it's for everyone. Passing ideas that helps and motivate others to do so. Stay blessed

[@CafeRacerGarage]

Thank you mate, yes that is the idea :)

[@Smallbore2wheels]

This bike has so much bad ass custom parts on it! Can't wait to see it rolling

[@CafeRacerGarage]

It’s not finished yet so stay tuned

[@Smallbore2wheels]

@@CafeRacerGarage I'm not going anywhere 🤙🏼

[@BareBonesMotorcycles]

Would have been really nice if you had fitted them to the bike and marked out the light position so it was pointing straight back instead of downward when the pegs are down. Cool concept though.

[@dc7290]

Agree on the concept, excellent idea. Being rear pegs don’t have to have that slant angle as do with front pegs as they grind on the road, couldn’t the frame brackets be realigned to a vertical position (90deg to ground). Then the peg angle will be more vertical allowing a more clear view to drivers/riders behind.

[@dc7290]

And the single wire taillight option in the m.unit👍

[@CafeRacerGarage]

100% I could of done this however it’s I like it the way it is and it’s just a bit of extra light so to me I like the subtle look the you don’t even know it’s there until they come on. And trust me, they are plenty bright 👍😊

[@Michael-99022]

where did you get those lights?

[@axelzanelli1348]

It gets better and better, your the Man Dan!

[@CafeRacerGarage]

Thank you mate, glad you are enjoying

[@thirstybike]

Those are sick! Where did you find those leds?

[@tphvictims5101]

Where there’s a Will there’s a Relative. BRILLIANT. If you want something done right, do it yourself 👍🏻

[@FunWithAJ]

Please sell these! I'd buy a pair. Signed someone who doesn't have a lathe.

[@CafeRacerGarage]

Thank you mate, stay tuned

[@thevibzz.]

Yes BrUh

[@jasongaretthatcher]

Seconded

[@az-cafe-moto]

You've done it again. That is awesome.

[@supertedogpriken]

Those break lghts/foot pegs looks amazing. Was so much fun watching you make them. Where are you getting them tiny brak lights? I need some of them for my bike builds.

[@airborne_infantryman8628]

This is really cool brother thanks so much for sharing this video!! 🍻

[@milanmarko1771]

What a brilliant idea

[@jarnosaarinen4583]

With your knurling do more then one pass. Go up stop it don't back out and go back ( put the lathe in reverse) the other way do that as many times as you like, usually twice up and back and your pattern will come out properly!

[@TwoWheeledHepkat]

What a great idea Dan! Very clean look too.

[@CafeRacerGarage]

Thank you mate

[@scottminshall6420]

Pretty cool idea Dan! Sounds like you might have a little money maker right there, you know in all of your spare time between builds!

[@CafeRacerGarage]

Thank you mate yes it seems that way doesn’t it.

[@rsbharley4766]

Nice video Dan, excellent job mate. Looks very cool, Cheers

[@tonodarias8044]

👌 que buen trabajo tío....me gustan tus ideas.... fantástico 💪👌

[@BenMJacobs1975]

Wow. Man do you ever do great stuff.

[@MainelyMoto207]

To find center of the peg, you'd touch of the jaws with an edge finder. First, touch off one jaw, then zero it on the DRO, then move the edge finder to the other jaw, find that edge, then divide that number in half. That number will be center.

[@CafeRacerGarage]

Thank you for that tip Dean

[@MainelyMoto207]

@@CafeRacerGarage I forgot to mention, this has to be done once the peg is tightened in the vice, since one jaw moves. But I like your to with the ruler, very handy.

[@timbarnett3898]

Now that's a really cool idea, putting brake lights in foot pegs! How in the world did you get all the great milling an other machines in your shop?

[@AutotuneIndonesia]

wow nice! It's look like exclusive foot page... I want too, haha Thumbs up from Autotune Indonesia dude...

[@aymenkhlifi7417]

really nice job and looks amazing !!!

[@JaySingh-ex6xc]

Put your knurling tool slightly off square to the work piece so instead of full face contact with job you only use the edge of the knurling wheels. 👍

[@CafeRacerGarage]

Thank you for the tip 👍

[@GYUx2]

Brilliant Dude brilliant!!!!👏👏👏

[@cedricletourneur5980]

You're great, Dan!

[@piusmacharia1596]

I always learn something from your work.. keep it up

[@CafeRacerGarage]

I’m really happy to hear that :)

[@garya3056]

Brilliant idea, Dan. On my Fatboy, I think my boot heels would block the lights? Not sure. In any event, very innovative! 🏍👍🏍

[@CafeRacerGarage]

Thank you mate. It would look awesome on your beast for sure

[@garya3056]

@@CafeRacerGarage 😎

[@joaofelix7400]

Top job 🤘🏻🤘🏻🤘🏻 can you tell where do you bought the leds?

[@jayn8392]

So jealous of your tools. I would kill for a lathe, or even just a milling machine/high quality drill press ir steel cutting bandsaw. All I got it a crappy old drill n press, belt grinder and hand held grinder. I do have a welder which is nice but man it's tough to shape metal without the right tools. You're parts all come out looking so nice and clean.

[@CafeRacerGarage]

Thank you so much mate, I have acquired many tools over many years doing different jobs. We can easily justify spending money on the things we love right :)

[@motortua1652]

Great idea....Thanks brother.....

[@hrx1973]

Great idea! You'll have ti make some for "my" CX as well! Greetings from Croatia!

[@williampetrey662]

Dude! This is BOSS! Love it!

[@CafeRacerGarage]

Thanx brother

[@williampetrey662]

@@CafeRacerGarage I'm curious if you have any plans for part fabrication for 1981 Suzuki Gs650g. I'm working on a project now, not much has been done with this model that is very "inspiration" to go by. It is a shaft driven. Not very popular with the Cafe community. Thus, that's why I went with it. Lol thanks mate! Keep the videos coming!

[@CafeRacerGarage]

@@williampetrey662 At this stage I have no plans for one of those but you never know what can happen, I’m always buying bikes ready for converting

[@williampetrey662]

@@CafeRacerGaragedeff keep going! Love the bikes and parts on the website. I will be making some purchases soon.

[@DirkWrightxyz]

Are those approved turn signals by the gov't where you live? In the USA, turn signals must be DOT approved.

[@scottdog182]

Like it Dan, I like it a lot. Would have these on my bike too just not the pillion peg but the main pegs. Will you be going in to production, may be a limited edition ?!!?

[@CafeRacerGarage]

Working on it as we speak.

[@lidorachmat5642]

Very creative good job

[@syedkazimhussaini1778]

Great work brother 💯💯

[@lukasbaumert]

If unfolded, the brakelight will shine at a 45° degree to the ground. Change the 45° degree angle of the Pin to horizontal, so the brake light will shine horizontal, independent of the footpegs position.

[@CafeRacerGarage]

I did it like this on purpose as it’s still visible and these are just extra lights, I already have the main brake light. Thank you for the comment

[@russcole5685]

If your knurl wasnt quite what you wanted, could have used a single point thread cutting tool, very high pitch, double helix, one right hand, another left hand

[@jawracing911]

Very well done….as usual 🤙🏼

[@Simon-kh2dd]

Just found your channel and am really enjoying your approach. I'm still trying to find any suitable donor bike near me and at a reasonable price.. That seems to be a challenge in the UK. Great content, thanks!

[@CafeRacerGarage]

That’s awesome, plenty out there but try watching this older video I did explaining how to search for a bike. kzbin.info/www/bejne/mHK4f4CEobuinK8

[@Simon-kh2dd]

@@CafeRacerGarage Thanks mate. A few things there I haven't tried, cheers!

[@chrissmith7669]

Very cool idea!

[@twowheeledgator1364]

I love them and want some. I am afraid some company is going to steal your idea.

[@CafeRacerGarage]

Working on it as we speak

[@mattmckee396]

These are great. Love it

[@MrBrenholdt]

Hello. love what you do. do you sell those foot rests?

[@nathanaelfrye829]

That's sweet man

[@DoctorMthepodcast]

Good job. Now cute stray puppies will know if u r turning right or left when they chase you 😅

[@gnemois]

That look awesome! Where did you get that small brake lights by the way? Cheers mate!

[@stephenpratt2902]

Oleg they are available on eBay

[@gnemois]

@@stephenpratt2902 thanks! 👍

[@michalaugustyniak6449]

Patent man, immediately!!!

[@Ahmad-zv7jj]

good project

[@queenslander954]

Very pretty

[@nabilelias4072]

Woooow 😍😍🥺🥺❤️

[@magnusmikkelsen539]

Oh hell yes! Sell those. I'll buy 4...

[@CafeRacerGarage]

Working on it mate

[@jamesabbott1309]

I want to buy a pair of these, those are so cool!

[@CafeRacerGarage]

I’m working it out now

[@charlesbarros5527]

Are you putting this to your store and when would it be?

[@CafeRacerGarage]

I think I will so stay tuned

[@michaelanderson4795]

Can you make these to order there awesome

[@CafeRacerGarage]

I’m working on it :) stay tuned

[@jessemendoza1415]

I really want this.

[@zokky7]

Bravo 👍

[@dseer7409]

Do you sell this? I would love to buy one

[@BOBBER400]

Very unique m8 : )

[@CafeRacerGarage]

Thank you mate

[@PunxTV123]

imagine if u sell these, and there are 300k buyers around the world… its ez money mate, sell these now

[@garyyorke1080]

Well Dan as always a great video . Seems your spoiling yourself just making excuses to use use the mill .lol. great idea with the magnets . Another solution that's simple but out the box . Cheers

[@CafeRacerGarage]

Thank you mate and yes I am, Willis came up with the magnet idea so I can’t take that part as my idea

[@nathanaelfrye829]

Can you make me a set for my 74 honda 750cc

[@Moosenukkels]

Please sell these, I'd buy two sets right now.

[@CafeRacerGarage]

Thank you mate, I will do my best so stay tuned

[@fuadisaiifuddin7026]

Nice bru

[@jarnosaarinen4583]

The diamond shape is the correct pattern. The first one isn't done right!

[@xghhddhfx8196]

How much you selling these for?

[@jakewood308]

Do you have this for sale?

[@CafeRacerGarage]

Working on it

[@dantizzle00]

👏👏👏🍻

[@thorodinson7739]

not allowed in germoney, no rear lights before the rear axle

[@CafeRacerGarage]

That’s a shame

[@MrSprocket2u]

passes rego ???

[@kamotecruiser4083]

FUCK!!! WHAT A GENIUS!!!

[@czortorys4401]

Me likey

[@martyncapstick8714]

Hmmm, Sorry - a bit too blingy for me. Would need to see footage from behind, from inside a car or truck, to see if they are visible to following drivers at the level and distance they will be sitting at - it doesn't look like they would be visible to anyone that wasn't lying down in the street. And if they don't make your braking more visible to following vehicles, then then they're superfluous and just for show. But an interesting build nontheless, and you have to try these things out.

[@johnDukemaster]

please Dan, never use the file like that! Left arm over the chuck is a no-go!

[@CafeRacerGarage]

Ok thank you mate, great tip. 👍