Making HYDRAULIC JACK Injector Tester

[@DorelBorlea]

DiY Fuel injector tester - is working kzbin.info/www/bejne/eHyVlXiOnKqDq80

[@juancarlosquintana8144]

Es una muy buena herramienta muchas felicidades y gracias por compartir con nosotros tu hingenio

[@antoniomarcoslara5309]

Ficou ótimo. So não entendi porque o manômetro ficou parado. Qual a finalidade dele ali.

[@BaderB-l9g]

Power induYour channel is amazing. Your ability to build things is admirable. This project is both beautiful and impressive. Please continue to post.👍 Your channel is amazing. Your ability to build things is admirable. This project is both beautiful and impressive. Please continue to post.👍

[@DorelBorlea]

Thank you. Your comment gives me confidence and I will try to build interesting and useful things.

[@aleksandarscekic5402]

and master, what is the problem that the manometer cannot show the pressure

[@aleksandarscekic5402]

Let me ask you something, master, what do you put in the hydraulic pump, is it pure diesel or do you mix it with oil?

[@DorelBorlea]

Pure diesel.

[@aleksandarscekic5402]

But I'm interested in this, can a pressure gauge of 400 bar, and a hydraulic diesel of 2-3 tons, if you understand me

[@DorelBorlea]

@@aleksandarscekic5402 Yes. You can use a 2T hydraulic jack and a 400 bar pressure gauge.

[@aleksandarscekic5402]

So, can the hydraulic pressure gauge with glycerin from 0-400 bar, on a 2-ton diesel engine?

[@AntonioLucianoVenia]

Ottimo, un capolavoro

[@АлександрДороженко-х3б]

Класс!! Отличная идея!

[@muhammadfarihin3190]

where you bought pressure meter gauge with fuel connector? answer now plis, urgent

[@DorelBorlea]

From local market.

[@Ovidiu668]

​@@DorelBorleainjector de u650 😂

[@DorelBorlea]

@@Ovidiu668 ce?

[@edgarb217]

How do you fill deaselhow do you fill the diesel?

[@wawerukamau1260]

You replace the hydraulic oil with diesel .

[@DorelBorlea]

Yes

[@jaybrown1873]

how can one know opening psi of any injector

[@andrijacvjetkovic4662]

Workshop manual for that engine

[@antoinedeoliveirarosas1594]

Hello, would it be possible to have the measurements of the cylinder you machined, I have the same jack, with all my gratitude. FRANCE.

[@DorelBorlea]

Hello. You can make an injector tester from any hydraulic jack. I no longer know the dimensions at which I machined the cylinder on the lathe. You have to drill the piston at the base and make a cover in the upper part of the cylinder. On that cover you have to mount a pressure gauge and a pipe that goes to the injector.

[@timcope3115]

Lets see, an inoperative gauge so you don't know what pressure the injector is popping off at so in essence it is useless.

[@DorelBorlea]

This pressure gauge is from the beer dispensers. I think higher pressures are needed to work. The device for checking injectors works, only the pressure gauge needs to be replaced.

[@toomanymachines]

the valve needs to be mounted after the valve.

[@DorelBorlea]

kzbin.info/www/bejne/eHyVlXiOnKqDq80

[@wafflesmotopoop]

Great build. I'll be making one myself, bot sure what gauge to yse either.. 400bar seemed smart but apparently not, or you had a bad injector or low pressure petrol one 🤔 mine will be primarly for diesel so id expect 250bar i believe 🤔 hmm.. thanks for this 👏🏼👍🏻👍🏻

[@DorelBorlea]

Hello. The pressure gauge is good. The problem was with the tap, diesel fuel went from the jack to the injector or from the injector to the pressure gauge. I canceled the tap function and now it works fine.

[@corradodefilippis2282]

Hi, whats the purpouse of the valve on the right side?

[@DorelBorlea]

Hi. No valve is needed for this device to work. It has no purpouse.

[@jhonbohorquez7131]

Presion maxima nesecito uno 600 bares camorail

[@DorelBorlea]

Depende del modelo de inyector. Este inyector debe abrirse a 173 bares. En este video no funcionaba el reloj indicador, pero resolví el problema.

[@Hamid-az]

Just destroying the tools 😂😂😂

[@chrisshook9326]

Don't see the gauge working....😮

[@DorelBorlea]

I wanted to see if an injector tester can be made from a hydraulic jack. This pressure gauge is for beer dispensers and I think much higher pressures are needed to work. It's a functional project, only it needs another pressure gauge..

[@MrBullfrog92]

20 ton jack is kinda overkill and totalky unnecessary. The cheapest 8 ton harbor freight jack will achieve the same results.

[@DorelBorlea]

@@MrBullfrog92 True. This 20 ton jack was defective and because of that I decided to turn it into an injector tester.

[@MrBullfrog92]

@DorelBorlea I totally get that! Whats the best alloy? Freealloy!

[@asmihael1]

Gde sipate gorivo

[@mhoellvheyanx]

It's fake, how do u fill the diesel? Are u need to disasemblly the pump for fill the diesel 😂😂😂

[@DorelBorlea]

The project is not completed. I wanted to see if an injector tester could be built from a hydraulic jack. A fuel tank is very easy to add.

[@toomanymachines]

You would just fill the oil filler with diesel. not tough to figure out.

[@Z-Ack]

Obviously they’re not blessed with a brain.. they’re probably one of those people who weld in flip flops and a piece of cardboard with window tint taped to it.. then wonders how they got burned and cant see afterwards..

[@CelsoVilladar-ns5bc]

Ok gud wrk

[@tubankota8962]

Mantep tanya harga sampe brpa

[@danilosantana9874]

top