Making Illuminated Acrylic Wedding Table Numbers with a Laser Cutter and 3D Printer

Follow along as I make custom Wedding Table Numbers for my sister's wedding. She and her fiancé got engaged overlooking the Newport Bridge in Rhode Island and wanted to incorporate the bridge into the design; check out what we came up with.
These Custom 3D Printed Wedding table numbers looked great alongside the centerpieces at the event. However, this same design would work wonderfully as a nightlight or any sort of glowing acrylic sign. It is a project that is achievable for any skill level and requires a laser cutter (like a Glowforge Laser Cutter) and a 3D printer.
Try it out yourself!
Thingiverse Files: www.thingivers...
Tools Used:
Artemis 300 3D Printer
Fabool Laser Cutter
Soldering Gun. amzn.to/2XOze4z
Heat Gun. amzn.to/2YeHU3G
Rubber Mallet. amzn.to/32ty9h7
Sanding Sponge. amzn.to/2XNMrKM
Materials Used: (most links are affiliate links)
Hatchbox 3D PLA Filament. amzn.to/2So5Tb5
Gold Spray Paint. amzn.to/2Y10jRi
Glowforge Proofgrade Medium Clear Acrylic
3 Volt LED Light. amzn.to/2XRSoS9
CR2023 Battery Holder. amzn.to/2XN7XPI
Mini Rocker Switch. amzn.to/2LofGNG
18 AWG Wire. amzn.to/2JIBvV0
Hot Glue. amzn.to/2JQkXdU
Heat Shrink Tubes. amzn.to/2XWd1gd
Wago Connectors. amzn.to/2XP4ag1
Music:
"Uh Oh" KZbin Audio Library
"Silver Skies" KZbin Audio Library
"Electric Youth" Ample Tunes

[@cait8573]

I could watch videos like yours all day. You and your daughter are very talented!

[@KeithLeonhardt]

These are fantastic! I really enjoyed your layout on how to build these. I’m sure they liked them!

[@DerekFromMalden]

Those came out awesome. I can really see people ordering something for other occasions. I think you hit a home run with it!!

[@mikewaskewicz]

Wonderful thing to do for your sister and a nice step by step tutorial. Those came out great!

[@corweiss06]

Super cool! I really dig these!

[@AminJorge]

Really cool.

[@achilleasp3148]

Very nice pal!! Those Table Numbers are amazing. However, I think you used a very thick cable for your needs. No harm done, but it's a waste!

[@jamessteurer644]

How long do you think battery lasts on this setup?

[@vicenterobles883]

What do you spray in your printer bed?

[@hayleegardner31]

Do you sell these or do a custom peice ?

[@dvsmotions]

You're not an electrical engineer I see.

[@MakersWorkshopLLC]

And I don’t claim to be one 👌🏻

[@vicenterobles883]

What do you spray on your printer bed?

[@MakersWorkshopLLC]

Hairspray. It helps the prints adhere

[@vicenterobles883]

@@MakersWorkshopLLC Thank you, I will try it out. I have applied glue stick, but it tends to leave a thick residue.