Making Latex Rubber Rock Molds

[@chriscorrigan7420]

Great idea. I'd love to see how you do the actual castings.

[@mpeterll]

There are a few videos elsewhere in this same play-list that show the process.

[@jeffgoldenberg9579]

Nice demo, and I really admire your work. Tip: to strengthen the molds, after the first two or three layers, add cheese cloth in between subsequent layers. It strengthens the mold and helps prevent tearing.

[@mpeterll]

Thanks for the tip. I've read that before somewhere. The very first rock mold I made I forgot to insert the cloth. A simple tear test afterwards revealed that the mold was plenty strong enough without it. Since then, I have never reinforced molds this way and I have never torn one either. Maybe I would get away with one less layer of rubber, but maybe the cloth would also stiffen the mold, making it less useful for wet casting. These molds work fine the way they are. Why try to fix what isn't broken.

[@daviemaclean61]

Flavoured soap! ;-) Stop licking the moulds Peter! Interesting video.

[@izaakmedina7779]

Very cool, great information!

[@arthurtrejo8522]

Wonderful! Can cement/concrete be used inside those molds?

[@MsDGirlz]

Would your Vasoline and Mineral Spirits mold release work in a spray bottle?

[@mpeterll]

Probably. I haven't tried it. There may be problems with clogging if the mineral spirits are allowed to evaporate in the nozzle, leaving just the jelly.

[@aiseatuikolovatu3425]

How can I get the liquid rubber to make my own lava rock skins?

[@mpeterll]

It's available at Michael's or Micro-mark.

[@aiseatuikolovatu3425]

@@mpeterll can you please give me their contact info. i live in Hawaii

[@imnotvintageimgrumpy586]

You should sell those molds! Might be cheaper to buy your latex from a distributor, just make sure it's heavily fillered like the Michael's stuff.

[@sujittahal4783]

I want to buy it from you. How

[@CONTAINERMAN68]

If I want to make a stiffer mold, would I want to place gauze or plaster cloth between the layers of latex rubber applications? How would I go about making a 2 part mold to cast duplicate pieces of say a giant windmill blade?

[@mpeterll]

I made a video on two part silicone rubber molds a few months ago.

[@jamesmceraghan9165]

Watch rubber mould guy do not use patrolium or soaps on rubber moulds it makes them hard and rots them use castor oil 1 part with 3 parts rubbing alcohol only you ruin someone else's mould