Making Linear Cutting Track Machine

The stand is very helpful during plasma cutting, you can cut small and large elements, thanks to the electric movement the cutting is much more accurate and faster than manual cutting. The mechanism is screwed, so it can be removed from the base at any time, so you can use the base itself for manual cutting, electrically powered plasma track

[@brhomehelp]

I build one of this router folowing your steps. The difference is a support to a circular saw and manual move (without electric motor) Thank you for the great idea!

[@hypersmudge1]

A really great build! You design and workmanship are to be commended! Incredible!

[@WorkshopFromScratch]

Thank you :)

[@ralfedasilva3094]

Parabéns irmão pelo trabalho!!!!👏🏼👏🏼

[@Elaman_forever]

Просто нет слов - одни эмоции! Все очень здорово получилось! Спасибо!

[@MCsCreations]

Pretty impressive work, dude! Fantastic! 😮 Really well done!!! 😃

[@WorkshopFromScratch]

Thank you :)

[@silvergrizzly316]

Brother, you are a fabricating genius!!! Excellent build my friend. 👍Jay 👍 GREAT JOB!!!

[@WorkshopFromScratch]

Thank you very much :)

[@davet9740]

Ingenious, well thought out and inspiring. Well done and Thank you Regards Dave

[@WorkshopFromScratch]

Thank you :)

[@alanm3438]

You did a nice job. It looks like you made it with a channel to hold water. I have a small CNC plasma cutter and I put a water table under it and the water really helps to keep the steel cool. I mostly work with thin steel. It looks like it will work great for straight line cutting. At first I did not know how you were doing the track and basically it is just like my machine. Good idea; I can not cut a straight line by hand even if I use a guide. It looks like it took some time to make and I hope that it will serve you for a long time to come. 😀😀😀😀😀😀😀😀😎

[@williamrojas4794]

Excelente trabajo amigo, lo felicito!!!

[@enoctovar4735]

Con ganas Perfecto !!! Muy util para diversos cortes seria genial hacer una como un tipo pantografo !!! Hacia los 2 ejes

[@vadimpetrov799]

Хорошая мысль, завтра сделаю

[@user-jq8ut9oc5e]

Сделал?

[@alexandrmaloletko2519]

GREAT JOB!!!👍

[@TheJavaSync]

Perfect!!! Amazing job

[@ilROSS]

Beautiful project!

[@WorkshopFromScratch]

Thank you :)

[@alexanderlytkinson]

Cool stuff! 👍

[@ntnguyen1]

good work, but dont speed up your video, play it at normal speed make you look more professional

[@Welder124]

Красавец! Крутая идея, лайк!)

[@trevorjenkins1976]

What gets me with all these wonderful projects is the high price of the material's used. Just for a peace of 12x50x1meter 30 pounds. Nice job.

[@FredSena]

Make the travel nut half cut, so you can move fast by hand to re-position. Overall: 9.9/10

[@WorkshopFromScratch]

Thank you for the advice :) Regards :)

[@radiowallofsound]

add another axis, sensors and make a cnc out of that! it looks awesome!

[@WorkshopFromScratch]

When it comes to CNC, I need to train myself a bit :) Thank you :)

[@darryleevans5930]

I don't have words to express your talent. except awesome mate.

[@WorkshopFromScratch]

Thank you 😄

[@erniebahr4666]

Great Job on the design and execution of your idea! I like the reused drill motor for the gantry drive. 😎😎😎 I could not be sure but did you make the speed adjustable to cut at the best speed for different thicknesses of metal?

[@WorkshopFromScratch]

Thank you. a rotation regulator is mounted, thanks to which I set the feed speed to the thickness of the material :)

[@Artem-pk2cq]

Отличное исполнение ,буду себе такой же делать.👍

[@ivancruzluque2795]

Exelente bro asi se hace esta a otro nivel sooooolo bueno te felicito buentoque

[@volnyi-master]

Смотрю ради кайфа от звука молотка! И сварочный звук не плох!))) А рельс с кареткой можно купить.))

[@sergeik1650]

👍👍👍отличная работа

[@eCitizen1]

Very nice. I think I would add some limit switches, but otherwise a very useful tool.

[@user-dv7vi5qj7c]

Отличная работа, ты реально крут чувак!

[@user-fw6wq7kk5e]

Класс. А еще на регулятор скорости метки нанести соответствия толщины металла и оптимальной скорости коретки.

[@foxwood67]

Mass produce I'll buy it. Lol. Quality work. 👍

[@WorkshopFromScratch]

Thanks :)

[@LeosTueftelei]

Nice idea and good work ! 👍 👍

[@WorkshopFromScratch]

Thank you 😁

[@varnamq3]

Great work, can you tell me whether you did anything beyond black spray paint on the rails to get that powder coated look?

[@johnscullans9124]

I admire people that can think something like this through and make it become a reality

[@Rubbernecker]

ten człowiek jest geniuszem!!

[@WorkshopFromScratch]

Dzięki 😁

[@stanb5685]

That is a great build excellent designing hands-down the best I’ve seen. Where did you get your threaded rod &And your guides?

[@donmichael6153]

Also a complete wiring diagram for the beginners.

[@user-xp9xc8lt7h]

Мне понравилось, спасибо.

[@user-rd4vt4wm7w]

Классная реализация!!!

[@diegocasafus8737]

Qué buena herramienta muy buena Saludos cordiales

[@geraldtuck8864]

Good job,would like to have one myself. Do you guess on were your cutting line is or have a measuring method.

[@terryfontaine9684]

HI GREAT WORK, but what is the little box you put in there to control the speed and direction, I love yours as it runs off 110v or 230 v

[@tameralsebaee1433]

Very creative work 👍👍👍

[@WorkshopFromScratch]

Thank you :)

[@tameralsebaee1433]

@@WorkshopFromScratch Just add 2 limit switch 👍👍

[@gasperajdnik5627]

Well done 👍☺️

[@WorkshopFromScratch]

Thanks :)

[@gasperajdnik5627]

Keep Up The good work :-)

[@shngacharnhorm977]

Excellent for my idea.

[@user-pd9pe2fy5l]

Концевые выключатели надо поставить. Или на редукторе шуруповерта убавить момент затяжки до минимума

[@user-mv6ur2go7x]

Молодець.Золоті руки.дякую.

[@rogertaylor8615]

Very neat great job

[@user-vn6gf9hm7c]

БРАВО ! МОИ АПЛОДИСМЕНТЫ !

[@MadeinPolandChannel]

I have to admit, it's better than mine :D

[@WorkshopFromScratch]

Thanks: D Your better ;)

[@Mikefestiva]

workshop from scratch nice job it turned out great! I have also seen Made in Poland plasma track, good work. Now you guys probably have not seen my plasma track but it’s also pretty neat, I went with a different approach, it works more like a chop saw with a back stop, and instead of moving the metal you can just move the cutting head from 90 to 45 and you can also tilt the plasma head, I wired up limit switchs as well. The video is called DIY plasma torch cutting track 👍 I got a smaller channel so it’s not had many views over the last year. Thanks for posting and making cool videos guys!

[@dzonyinglisz1611]

Macie identyczny styl. Już widzę oczami wyobraźni jakie rzeczy moglibyście tworzyć gdybyście razem pracowali, normalnie rozumielibyście się bez słów.

[@karolmarcinek665]

Czemu piszecie do siebie po angielsku?

[@WorkshopFromScratch]

@@karolmarcinek665 Nie mamy tylko polskich odbiorców, więc aby było dla wszystkich zrozumiałe to co robimy staramy się posługiwać językiem angielskim, który jest bardziej uniwersalnym językiem dla odbiorców, a nawet jeśli nie to w dzisiejszych czasach przetłumaczenie zdania trwa ułamek sekundy:) pozdrawiam

[@tattoos1988]

One word says it all QUALITY 👍

[@WorkshopFromScratch]

Thank you 😁

[@joeydimeo5512]

Nice work...very creative

[@WorkshopFromScratch]

Thank you :)

[@donmichael6153]

How about on all of the electronics a full descriptive parts/item/manufacture/where purchased list?

[@fidelsantos7271]

do so please

[@balexfox]

Great idea thank you

[@arturlend2297]

Dobra robota 👏👍😁

[@Asdasd-kb9ib]

Good job 👏

[@mylesdrake4518]

Do you design first or just improvise?

[@robertgilmour1903]

I am impressed.

[@WorkshopFromScratch]

Thank you :)

[@luiscontrerasc]

A real profesional, thanks !

[@WorkshopFromScratch]

Thank you :)

[@moisescordeiro6241]

Muito bom.👍👍👍👍👍

[@ollisteel7112]

Thank you for your great videos! Where do you got the thread rod, the bearings and the posthole driller? Cheers!!

[@mattmax8599]

Internet

[@mildot5482]

Good job .. i would like if you put the links of some items which you are using

[@bofe1709]

Does it work with plasma cutters that don´t have pilot arch?

[@lukii1215]

👍

[@davidme9698]

SUNNY BEACHES that’s cool!!

[@baer1204]

Ganz Genial !!!!!! einfach Klasse 👌👌😎👍👍👍👍😉

[@WorkshopFromScratch]

Danke :)

[@Mechanical803]

Excellent

[@WorkshopFromScratch]

Thanks:)

[@obraseirl]

Estimado espectacular su trabajo Puede publicar las medidas atento a comentarios Saludos

[@9620oscar]

buen trabajo ,muy util para cortes pequeños,un detalle en la velocidad de corte , muy lento

[@uguyssss]

Very professional! Are you building these machines for your own shop or for resale? What country are you from? They are so professionally build and finished, all new material, wow!

[@WorkshopFromScratch]

Thank you :) I build machines because I like to build, and thanks to the KZbin platform I can show you the whole construction process :)

[@zainularifin5755]

Good job Amazing

[@wroughtiron4479]

Good Luck bro

[@TheDIYer]

I assume this is a high frequency plasma cutter? I read somewhere that low frequency ones don't work with cnc's

[@moadi_alqahtani]

nice

[@Legat63]

Отлично ! Very good !

[@WorkshopFromScratch]

Thank you 😁

[@tierfuehrer2]

How useful is a one axis cutting table? Ok, you can make straight cuts better then with oxy/ace. But can you control a straight cut well, which ends in the material? Like the material has a width of 100cm and you only need a 20cm piece.

[@rodolfovazquezroldan6905]

What are the materials that you used and how did you do to make your lazer cut from that box and how did you connect it hehe

[@funwithmagnus8570]

Only thing I would personally change is the all-thread and get more travel speed with less motor rpm. That rig could easily be cutting way faster.

[@user-vg2ip7qp6i]

Класс вот такую штуку мне и надо ! 👍👍👍

[@budipirang2694]

nice job

[@-arm-3835]

Отлично 👍

[@bowlweevil4161]

a windshield wiper motor would work very well also, 5 amp pwm with reverse at amazon to control motor is less than $10.00 good vid thanx

[@user-vq9ss6yo1f]

Хороший станок👍

[@gervanireis1453]

Parabéns pelo vídeo. Mais infelismente nem todos brasileiros tem acessos as ferramentas que você usou para construir. 😭

[@padsmm]

Yep, that's good.

[@Alex-xv2vw]

А что случилось с таким же приспособлением под болгарку, или плазморез на столько выгоднее?

[@user-ho2hx5ok5v]

Классная установка получилось. Молодец. Направляющий профиль 30-й ?

[@mehdipascal250]

Très jolie travail, je pense que vous avez les compétences pour fabriquer une CNC.

[@dartele1]

Tem como compartilhar, as medidas do projeto, todo.

[@richardgalet733]

GOOD WORK

[@user-rb7ld9rz7b]

Здорово! Какой резак используете?

[@jesusmarte1880]

Excelente

[@iamnemo8479]

Very nice😎👍

[@diy001]

언제 보아도 감동 ... 희망입니다

[@diegolavecchia3110]

👏🏻👏🏻👏🏻

[@bombayvega7021]

Great stuff. I've never used plasma cutter before. What are the most used cases where you would use Plasma cutter more often?

[@petrusliebenberg3915]

Most metal that dan not be cut with Oxy/Acl gas for example stainless steel,copper, aluminium.

[@petrusliebenberg3915]

Can not

[@bombayvega7021]

@@petrusliebenberg3915 thank you

[@Max-px9xo]

Вы сделали половину ЧПУ станка. Осталось немного.

[@outdoorzone]

Wow!! I understand most of the build but how are you turning on the torch ???

[@richsmith3300]

That's what he plugged in to the hand peice he bypasses the trigger and mounted the off on to the panel. Correct me if I'm wrong please.🤔

[@AlienJ69]

Witam, robi wrażenie, chciałbym sprawić taką dla siebie, czy mają Panowie jakieś plany/rysunki, czy też spis zwymiarowanych elementów?

[@jptazzairbrushingjprice7250]

Do you have plans or drawings for this project? Like the cut list for the tubing and flat stock.

[@WorkshopFromScratch]

I have no plans, but when you decide to build, write to me and I will give you the dimensions :)

[@micharoman9188]

So next step is CNC cutting machine :)